SOW_LARGE_METALLOGRAPHIC_SAW.pdf
PDF 130 KB Posted
- Attached to
- Presolicitation Synopsis Struers Large Metallographic Cut Off Saw (Sole Source) Federal contract opportunity
- Solicitation number
- SP470624Q0017
- Issued by
- Defense Logistics Agency
About this file
This document is a Performance Work Statement (PWS) for the procurement of a Large Metallographic Cut-off Saw by the Defense Logistics Agency (DLA) Mechanical Product Test Center (MPTC) located in Columbus, Ohio. The key objectives are to replace obsolete and non-operational equipment, improve sectioning time and part testing capacity, and minimize impact to MPTC operations and customers.
The PWS specifies the required capabilities of the saw, including automatic cleaning, table positioning laser, self-feeding x-axis table, adjustable feed rates and wheel RPM, ability to save cutting parameters, large work area, integrated cooling system, and a minimum one-year warranty. This will be a sole source procurement from Struers, Inc. as their Discotom-100 saw is the only model that meets all the required technical specifications. Delivery is expected within 8-10 weeks after contract award. Invoicing and payment will be processed through the Defense Finance and Accounting Service and Wide Area Workflow system.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| TECH_SPECS_LARGE_METALLOGRAPHIC_SAW.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PERFORMANCE WORK STATEMENT
1. Mechanical Test Lab
1 May 2024
Requiring Activity: DLA Product Test Center Division, Mechanical Lab, located at Cols, Ohio.
Contracting Activity: DLA Contracting Services located at Cols, Ohio.
2. Introduction
This is a description of the DLA Mechanical Product Test Center (MPTC) requirements for the procurement of a Large Metallographic Cut-off Saw. It is the intent here to clearly define all required performance characteristics. In generating this statement, our objective is to end up with a large metallographic cut-off saw which replaces obsolete / non-operating equipment. This acquisition will improve sectioning time and allow for a greater diversity of parts received from the Product Verification Test Coordinators. Our general objective is to minimize any impact to the MPTC operations and our customers as a result of this procurement, especially with regards to test cycle time. This equipment will decrease time required to section parts and remove any discrepancies with current sectioning equipment. This machine will replace non-functioning Leco sectioning equipment with newer and more technically advanced equipment.
3. Background
This equipment would increase MPTC’s sectioning efficiency and accuracy, help improve testing turnaround time, and replace one non-operational Leco cut-off saw. Most importantly procurement of this equipment will increase our current metallographic testing capacity. Not procuring this piece of equipment would leave the MPTC with only one fully functioning manual cut-off saw.
4. Scope
Install one Struers Large Metallographic Cut-off Saw.
5. Applicable Directives
None
6. Performance Requirements
The Contractor will install and provide training on the new Large Metallographic Cut-off Saw in the Mechanical test lab.
7. Deliverables
One Struers Discotom-100 Large Metallographic Cut-off Saw.
9. Place of Performance
DSCC Columbus Building 9 Section 1 3990 East Broad Street Whitehall, OH 43213
Shipped receivable to Bldg 17
Marked for Bldg 9 section 1
Attn: William Myers 614-692-7074
Work to be performed will take place at: Building 9, Section 1
10. Travel (if applicable)
No line-item travel was itemized in quote.
11. Invoicing
Payment of invoices will be accomplished by payment through the Defense Finance and Accounting Service. Invoices will be submitted to the Wide Area Workflow system in accordance with DFARS 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports and DFARS 252.232- 7006 Wide Area Workflow Payment Instructions within 10 workdays after the conclusion of each training session.
12. WAWF Acceptance DODAAC#
TM Lab is SL0702.
13. Point of Contacts
The Government Contract Officer:
TBD
The Government Contract Officer Representative (COR):
Kyle Palmer Kyle.Palmer@dla.mil 614-692-8860
DLA Land and Maritime Product Test Center, T Office 3990 E. Broad St., Columbus, OH Bldg. 9, Section 1 Attn: William Myers 614-692-7074
The Government Technical Representative/Project Manager:
Name: William Myers Phone Number: (614) 692-7074 Email Address:
william.1.myers@dla.mil mailto:Kyle.Palmer@dla.mil
File details come from the government source that posted it. Updated .