SOW - Hopi.pdf

Hopi Health Care Center – A-dec Dental Operatory Equipment/Cabinetry

Statement of Work

Project Title: Hopi Health Care Center – A-dec Dental Operatory Equipment/Cabinetry

1. Introduction and Background

The Indian Health Service (IHS), Phoenix Area Office (PAO) Department of Acquisition Management (DAM), is procuring for a Contractor to provide equipment and technical services necessary to remove existing dental equipment and cabinetry and install new A-dec dental equipment and cabinetry at Hopi Health Care Center. This purchase includes de-installation of existing equipment and cabinetry and procurement, delivery, assembly, installation, and inspection of new A-dec dental equipment and cabinetry by an Original Equipment Manufacturer (OEM) certified installer and authorized dealer. This is a brand name procurement only, as the equipment currently utilized and supported in Phoenix Area IHS is A-dec, Inc dental equipment. All requested equipment is the same brand and quality found in other Phoenix Area IHS service units in order to keep all dental operatories universal. Procurement of the A-dec equipment and accessories aids the local Biomedical Engineering department’s ability to fulfill maintenance requirements and reduces the clinician burden of new training requirements. The current A-dec dental equipment and accessories have reached the end of use lifecycle and new equipment is required to provide dental care in the most current standard of care settings as recommended by the American Dental Association (ADA) and The Joint Commission (TJC). The de-installation services shall include the safe uninstallation and removal of the existing outdated dental equipment and cabinetry.

2. Service and Equipment Requirements

The Contractor shall provide A-dec certified personnel to perform comprehensive on-site visits to Hopi Health Care Center, in order to de-install existing dental equipment/cabinetry and install new A-dec dental equipment/cabinetry to optimal operation. The Contractor shall provide all test equipment, tools, labor, supervision, parts, travel, and any other items deemed necessary to fulfill the requirements of this statement of work. All equipment shall be installed without unapproved modifications to the existing structure or utilities. Specific tasks and requirements include the following:

2.1 – Existing Dental Equipment/Cabinetry De-installation Services:

The Contractor shall provide de-installation services necessary to safely uninstall and remove existing dental equipment (delivery systems) and cabinetry located in the Hopi Health Care Center Dental Clinic.

All components of the existing dental equipment shall be removed by the Contractor unless otherwise specified by IHS. No elements of the existing A-dec operatory equipment and cabinetry are to be abandoned-in-place. The Contractor shall coordinate with the local Biomedical Engineering department and Property and Supply department to ensure the equipment is correctly routed for removal from dental treatment patient areas. Services shall include transport of all existing equipment for complete removal from Hopi Health Care Center premises following approval from the Hopi Health Care Center Property Department. The Contractor shall decommission and disconnect all existing equipment in accordance with local regulatory requirements. Electrical components (circuit boards, cabling, etc.) shall be recycled as electrical salvage while metal components (aluminum, brass, iron, etc.) shall be recycled as metal salvage.

The Contractor shall handle all biologically contaminated materials (cuspidor, waste lines, extraction lines, etc.) with care and follow the necessary safety precautions when dismantling the existing equipment. All other material types unsuitable for recycling shall be removed from the premises and disposed of appropriately.

2.2 – A-dec Dental Equipment/Cabinetry Procurement, Delivery, and Installation:

The Contractor shall procure, install, and configure all new A-dec dental equipment and cabinetry to operate inside the Hopi Health Care Center Dental Clinic. The Contractor shall deliver, install, and certify all dental equipment to fully comply with all relevant A-dec installation criteria and technical standards.

The equipment must conform to site conditions (existing structures/connections) and A-dec install specifications. The Contractor shall install the new A-dec cabinetry in the specified dental clinical locations and ensure all cabinetry conforms to existing electrical and plumbing connections. The Contractor shall ensure all new A-dec equipment is properly installed and mounted with the new A-dec cabinetry. The Contractor shall install, assemble, and anchor the dental equipment per OEM specifications requirements.

All equipment and accessories shall be new condition, A-dec factory assembled/configured, and include a factory warranty. Remanufactured items or items procured through non-authorized channels (gray market) will not be accepted. The Contractor shall ensure all cabinetry with custom dimensions are designed and developed by the A-dec Tailored Solutions team in order to conform to the installation location and existing walls/flooring. The Contractor shall warrant all workmanship. The Contractor shall ensure the equipment is pre-assembled at the A-dec factory, blanket-wrapped and delivered to Hopi Health Care Center. It is the Contractor’s responsibility to unload, unpack, and uncrate all equipment/cabinetry and properly remove and dispose of packing material. The Contractor shall remove the wrapping, transport, and physically install the equipment/cabinetry at the operatory/room location. The Contractor shall assemble, install/adjust, and test the A-dec devices and components to ensure proper operation and electrical safety. The Contractor is responsible for the repair and/or replacement of any damaged, defective, broken, or missing item/part/accessory. A complete list of all A-dec equipment and services (including options/accessories/configurations) required in this procurement is listed in Section 14 – A-dec Equipment/Cabinetry and Services. The Contractor shall provide and install the following A-Dec dental equipment/cabinetry and services:

2.2.1 A-dec 591 Inspire 42" Full Treatment Console (Reference MFG Part #0458109) – Quantity 10

2.2.2 A-dec 591 Inspire 70" Full Treatment Console (Reference MFG Part #0458111) – Quantity 3

2.2.3 A-dec 545 -12 O'Clock Asst Instm (Reference MFG Part #0458112) – Quantity 10

2.2.4 A-dec 541 -12 O'Clock Duo Instm (Reference MFG Part #0458113) – Quantity 3

2.2.5 A-dec 592 - Inspire 128" Full Central Console (Reference MFG Part #0458114) – Quantity 6

2.2.6 A-dec 592 - Inspire 128" Full Central Console (Reference MFG Part #0458115) – Quantity 3

2.2.7 A-dec 593 - Inspire 84" Lower Side Console (Reference MFG Part #0458116) – Quantity 4

2.2.8 A-dec 593 - Inspire 84" Side Console (Reference MFG Part #0458118) – Quantity 1

2.2.9 A-dec 593 - Inspire 70" Side Console (Reference MFG Part 0458120) – Quantity 1

2.2.10 A-dec 595 - Inspire 28" Wall-Mounted Cabinet (Reference MFG Part 0458122) – Quantity 5

2.2.11 A-dec 595 - Inspire 28" Wall-Mounted Cabinet (Reference MFG Part 0458123) – Quantity 1

2.2.12 Tubing,Control Motor,Medium,Kavo,OTC (Reference MFG Part #54.0846.00) – Quantity 10

2.2.13 Electric HS Package,M25L,Master Matic (Reference MFG Part #54.0882.00) – Quantity 13

2.2.14 Motor,Electric HDPC,KL 703 (Reference MFG Part #54.0838.00) – Quantity 26

2.2.15 Installation of New Equipment/Cabinetry Services

2.2.16 Delivery/Blanket Wrap Services

2.2.17 De-installation of Existing Equipment/Cabinetry Services

2.3 – A-dec Dental Equipment Inspection and Performance Testing:

The Contractor shall test all A-dec dental equipment after installation to confirm proper operation in accordance with OEM requirements. The Contractor shall make final air, central vacuum, water, and electrical connections in accordance with A-dec and IHS structural and utility requirements. Qualified personnel shall perform calibrations and function testing of the dental equipment. Phoenix Area Indian Health service will accept the equipment once installation and successful verification testing has been completed and approved.

2.4 – A-dec Dental Equipment Training:

The Contractor shall provide orientation and end-user training to the Hopi Health Care Center dental department staff upon final installation.

2.5 – Documentation of services performed and supporting documents The Contractor shall provide a detailed service report indicating services performed and include pertinent information such as equipment identification (serial number and device type) and equipment location (operatory/room). Printed and digital copies of all packing slips, bills of lading, and other shipping documents shall be provided to the local Hopi Health Care Center Property & Supply department and Contracting Officer’s Representative (COR). The Contractor shall provide all supporting documents upon request including service manuals, user manuals, and technical data sheets.

3. General Requirements

The services/work that the Contractor shall provide specifically includes those described in Section 2 or specified herein.

However, the performance as described and specified shall not be deemed to constitute a detailed specification having the effect of excluding other needed work not specifically mentioned that will be necessary for the successful completion of this project as generally described. The Contractor is required to furnish all services necessary to successfully fulfill the overall objectives set forth in the contract.

Complete de-installation of existing equipment/cabinetry and delivery, installation, and testing of new equipment shall be provided by the Contractor. The Contractor shall provide all services and technical support necessary to install and configure the A-dec equipment. Full operation and final configuration of all A-dec equipment and cabinetry shall be achieved within the period of performance of this contact. The Contractor shall clean and wipe down all equipment after installation.

The Contractor shall maintain a current list of the A-dec equipment installed at Hopi Health Care Center and shall provide an updated list to the Contracting Officer Representative (COR) upon request. This list shall include the following information: current technical specifications of the A-dec devices and device information (device type, serial number, location, and current configuration).

The Contractor shall uninstall and remove all current Hopi Health Care Center dental operatory equipment and cabinetry necessary to implement the new A-dec dental platform. The Contractor shall inform the local biomedical engineering and property department of all equipment removed from service. The Hopi Health Care Center Property Specialist and Biomedical Equipment Technician will coordinate with the Contractor to generate an accurate list of dental equipment/cabinetry being removed from the building. The Contractor shall remove all trash, discarded parts, dunnage, and other material from areas immediately after completion of installation. Government-owned dumpsters may be used for disposal of this nonhazardous waste material. The general area shall be left in a clean and orderly condition free of any foreign material caused by the installation or repair activities.

The Contractor shall provide on-site visits for all services listed herein including installation/configuration of A-dec devices, and training services. The Contractor shall furnish all necessary tools, consumables, software and test equipment to pursue the fulfillment of work performed under this Statement of Work. The Contractor shall provide the necessary parts and accessories (including mounts) to ensure all new A-dec equipment/cabinetry is properly installed and has seamless integration with the existing utilities and forms to the dental clinic flooring and wall infrastructure.

The Contractor shall provide at least two site visits prior to installation of the operatory equipment/cabinetry and at least one visit for the final review, testing, and subsequent acceptance by IHS of the A-dec dental equipment/cabinetry. The Contractor shall assign a project manager to coordinate meetings with all IHS stakeholders (dental department, engineering department, and property department) prior to installation services and addresses any potential delays to the dental project.

The Contractor shall warrant all workmanship. The standard A-dec manufacturer warranty is 5 year parts unless otherwise specified in the product manual and/or Seller’s quotation. The Contractor shall at minimum provide a full 5 year warranty for parts and labor for all A-dec equipment and components listed herein. The warranty shall begin at the time of IHS acceptance of equipment and after installation. All services shall be performed in accordance with A-dec requirements, in order to fulfill requirements for coverage of the following manufacturer warranty:

a) 5 Years for Dental Chairs, Lights, Delivery Systems, and Monitor Mounts

b) 2 Years for A-DEC EA-53 Electric Motor, Tubing and Control Modules

c) 1 Year for Clinical Products

d) 5 years for dental furniture/cabinetry

The Contractor shall provide training such that all patient care providers (end-users) and biomedical technicians completing the training are qualified to operate the A-dec equipment.

The Contractor shall provide all shipping and handling services necessary to deliver and install the A-dec equipment.

Equipment shall be delivered by standard freight and lift gate delivery service shall be provided upon request. The Contractor shall inform the COR and local service unit point of contacts of shipping updates and provide notification of shipment within 24 hours.

The Contractor shall provide a projected schedule for the project, within 15 days of contract award addressing the following milestones: on-site survey and verification that all A-dec system quantities and configurations are accurate, manufacture/factory assembly of all parts and/or equipment, delivery to Hopi Health Care Center, and complete de-installation of existing equipment/cabinetry and installation of new A-dec equipment/cabinetry.

All equipment and materials provided by the Contractor shall be new and, where appropriate, shall arrive on-site sealed in original manufacturer’s containers and blanket-wrapped. The Government reserves the right to refuse any items deemed to not meet this requirement. The Contractor shall provide tools, labor and any test equipment for installation and removal of old equipment/cabinetry from the premises.

4. Contractor Personnel Requirements

The Contractor shall provide A-dec certified service personnel with experience in maintenance, installation and testing of the A-dec equipment types listed herein. Personnel shall be qualified to perform the required installation and training services for all listed equipment (see Section 14 – A-dec Equipment and Services). In the event a service representative is unable to fulfill all services listed herein, the Contractor shall provide a senior service engineer, or like, to resolve any problems. All workmanship performed by the Contractor shall be of acceptable industry standard quality and shall be immediately rectified at no additional cost to the Government upon notification of non-acceptability by the Government.

Valid documentation of A-dec certification and current manufacturer’s authorization to perform technical support, installation, and maintenance on the items listed in Section 14 shall be included with the submission of offer at the time of solicitation.

5. Contractor Requirements

The Contractor shall provide all needed supplies, OEM parts, materials, equipment, and tools that are necessary for the performance of the contract requirements. The Contractor shall be held responsible for the cost of any necessary repairs or equipment replacements caused by negligence and abuse on his/her part. The Contractor shall be responsible for the cost for safeguarding all Government property that will be serviced under this contract. The Contractor shall have adequate liability insurance to cover any potential liability. In no event shall the Government release the Contractor from liability arising from acts of omission, improper repair, negligence, or deliberate or non-deliberate acts that jeopardize the health and safety of patients and/or Government employees. The rules of law governing such incidents or actions shall prevail.

The Contractor shall be an Original Equipment Manufacturer (OEM) authorized dealer, authorized distributor, or authorized Contractor reseller for the proposed equipment/system such that the OEM warranty is supported and maintained by the OEM. The Contractor shall be OEM authorized/certified to service the required A-dec equipment/cabientry throughout the lifecycle of the contract. If you are not the original equipment manufacturer (OEM), then an Authorized Distributor Letter is required with the submission of offer at the time of solicitation in order to be considered for the award.

6. Reporting Requirement and Deliverables

6.1 Service Reports: The Contractor shall instruct its service representatives to obtain a signature from the COR or designee official responsible for the equipment upon completion of the installation and de-installation services. A copy of the signed service report shall be left with the COR or designee official responsible for the A-dec equipment/cabinetry. The Contractor shall also forward copies of the Installation and Testing Service Reports to the COR by the 7th day after service is performed. However, Emergency Maintenance Service Reports shall be forwarded to the COR within 10 working days after completion of the service. At a minimum, Service Reports should include the following information:

6.1.1 Device type

6.1.2 Model Number

6.1.3 Serial Number

6.1.4 Location(operatory/room number)

6.1.5 Configuration/settings on device

6.1.6 Serial Number, Make, Model and Last Calibration Date of all Test, Measurement, and

Diagnostic Equipment (TMDE) used. All equipment shall be NIST traceable.

6.1.7 Testing Results

6.1.8 Technician Comments.

6.2 Original Equipment Manufacturer’s Supporting Documentation

6.2.1 The Contractor shall provide hard copies and digital copies of the latest versions of the manufacturer’s manuals for operation, maintenance, inspection, and repair. Documents shall include User’s Manuals, Service Manuals, Operator’s manuals, etc.

6.3 Invoices: The Contractor shall submit an original invoice and three copies (or electronic invoice, if authorized) to the address designated in the contract to receive invoices. The invoice shall be emailed to the COR or his/her designee. An invoice must include the following:

6.3.1 Name and address of the Contractor;

6.3.2 Invoice date and number;

6.3.3 Dates of service/delivery;

6.3.4 Contract number, line item number and, if applicable, the order number;

6.3.5 Description, quantity, unit of measure, unit price and extended price of the items delivered;

6.3.6 Shipping number and date of shipment, including the bill of lading number and weight of shipment if shipped on Government bill of lading; Manufacturer make/model and serial number information is required for all equipment procured and/or serviced.

6.3.7 Terms of any discount for prompt payment offered;

6.3.8 Name and address of official to whom payment is to be sent;

6.3.9 Name, title, and phone number of person to notify in event of defective invoice; and

6.3.10 Taxpayer Identification Number (TIN). The Contractor shall include its TIN on the invoice only if required elsewhere in this contract.

6.3.11 Electronic funds transfer (EFT) banking information.

6.3.12 The Contractor shall include EFT banking information on the invoice only if required elsewhere in this contract. If EFT banking information is not required to be on the invoice, in order for the invoice to be a proper invoice, the Contractor shall have submitted correct EFT banking information in accordance with the applicable solicitation provision, contract clause (e.g., 52.232-33, Payment by Electronic Funds Transfer— System for Award Management, or 52.232-34, Payment by Electronic Funds Transfer—Other Than System for Award

Management), or applicable agency procedures. EFT banking information is not required if the Government waived the requirement to pay by EFT.

6.3.13 Invoices will be handled in accordance with the Prompt Payment Act (31 U.S.C. 3903) and Office of Management and Budget (OMB) prompt payment regulations at 5 CFR part 1315.

6.4 Training: The Contractor shall schedule and provide operator and in-service training for the Hopi Health Care Center dental staff. The following in-service trainings shall be provided by the Contractor:

6.4.1 Provide operational and problem identification training to Dental Clinic staff on-site at Hopi Health Care Center.

6.4.2 Available A-dec training resources such as operator’s guides and quick reference sheets shall be provided in hard copies and digital copies.

7. Conformance standards

The Contractor shall install and service the A-dec equipment covered by this contract in accordance with the following standards:

7.1.1 Original Equipment Manufacturer’s (OEM) specification requirements

7.1.2 American National Standard (ANSI)/American Dental Association (ADA) Standards Committee on Dental

Products (SDP) standards

7.1.3 National Fire Protection Association (NFPA) 99 (2012 Edition), 101 (2012 Edition), 70E (2012 edition)

7.1.4 The Joint Commission Standard (EC.02.04.03)

7.1.5 Association for the Advancement of Medical Instrumentation (ANSI/AAMI EQ56:2013))

7.1.6 ISO Technical Committee 106-Dentistry (ISO/TC 106) recommendations

7.1.7 Occupational Health and Safety Association

7.1.8 Federal, Tribal, and local regulatory guidance and ordinances in regards to bio hazardous waste, disposal, and applications

8. Inspection and Acceptance Criteria

The Government will monitor the Contractor’s performance under this contract and shall retain the right to perform unscheduled inspections, as it deems necessary. Furthermore, the Government retains all rights provided by the FAR (Federal Acquisition Regulations) clause entitled “Inspection of Services – Fixed Price” and any other inspection clause, which may be specified in the contract. The Government will conduct an acceptance inspection following the completion of the A-dec equipment installation. The inspection will be performed by the Hopi Health Care Center Biomedical Engineering staff and Dental Program Director. Contractor shall correct any deficiencies noted within 30 days following the inspection.

The Contractor shall have a prior successful history in providing A-dec installation services and present full ability to perform all services during the lifecycle of the contract. The Contractor shall investigate all deficiencies, complaints, and suspected issues involving services performed that do not conform to the expectation listed within the Statement of Work.

In the event an identified issue is not remediated in a timely manner, an independent qualified consultant shall be retained at the Contractor’s expense.

The COR will monitor the Contractor’s activities and accomplishments and will indicate acceptance or non-acceptance of the deliverable. The deliverables identified within this Statement of Work will be inspected and either approved or, if they are not acceptable, rejected by the COR. The Contractor shall establish an inspection system covering the equipment stated in this Statement of Work. The Contractor shall maintain a history file on all de-installations, installations, testing, repairs, relocations and inspections conducted. The history file shall be the property of the Government and shall be maintained by the Contractor and turned over to the COR upon completion of the contract.

9. Safety Precautions/ Bio-Hazard Safety

All system, either mechanical or electrical that must be deactivated before servicing shall be rendered by whatever disconnect or shut-off means are provided. Each deactivated system shall be properly “tagged-out” to prevent accidental reactivation. The Hopi Health Care Center Biomedical Engineering Department will furnish “tag-out” procedures and tags. The Government shall be responsible for removing the contents of any equipment and ensuring it is biologically safe.

If applicable, the Contractor shall notify the Hopi Health Care Center Biomedical Engineering Department and Safety Officer before removing any bio-hazardous material. If applicable, the Contractor is responsible for removing and disposing of all hazardous materials/sources.

10. Schedule and Notification, Government Responsibility

The contractor shall provide all services during normal operating hours Monday through Friday from 8:00 a.m. to 4:30 p.m. during the week, unless otherwise specified. Any de-install or install services outside of the normal work schedule shall be arranged with the facility Point of Contact at no additional expense to the Government in the event the project is delayed at the fault of the Contractor. In the event after-hours work is requested by the service unit, the Contractor shall provide a cost estimate for the hourly cost of the requested schedule to the COR. The COR will submit a request to the Contracting Officer for after-hours/weekend work. After-hours work must be approved by the Contracting Officer prior to beginning any work outside of normal operating hours. Service schedule shall be agreed to by the contractor and the designated COR. The Contractor personnel shall check-in with the Hopi Health Care Center Biomedical Engineering Department or Facilities Engineering Department before beginning any work. Contractor shall call or email the Hopi Health Care Center Service Unit staff and coordinate with the department leads during project implementation. The Contractor shall acquire approval for all scheduled dates for services and deliveries, no less than one (1) week in advance.

Contractor shall comply with IHS visitation policy.

10.1 Before performing services the Contractor personnel shall report to the local Facilities Engineering or Biomedical Engineering Department at the beginning and end of their entire visitation at the facility, to sign-in and receive a facility “Guest” badge.

10.2 The Contractor shall report to the Facilities and/or Biomedical Department at the beginning of each visitation for a wellness screening prior to start of work due to COVID-19 response. The Contractor’s personnel shall comply with all visitation requirements prior to entering the facility.

10.3 The Contractor shall be authorized to park only in areas opened to the public.

10.4 The Contractor shall be allowed minimal use of government space to store supplies and/or equipment as required under this contract.

10.5 The Contractor shall be responsible for any repair or damage incurred to the building system as a result of contractor errors or poor workmanship.

11. Performance Period

The Period of Performance for this contract is nine months from the issuance of award.

12. Submission of Offer

The Contractor shall provide the following documentation with the submission of offer at the time of solicitation:

12.1 Documentation of the manufacturer of the A-dec dental equipment/cabinetry

12.2 Documentation and/or technical specification sheets of the A-dec dental equipment/cabinetry

12.3 A-dec Authorized Distributor Letter and A-dec Certified/Trained Personnel (Documentation confirming

Contractor is OEM authorized dealer/installer)

12.4 Information detailed in submitted offer shall include clear description of equipment and services by line item

(Reference Section 14):

12.4.1 A-dec equipment information (Manufacturer Item #, Device Description, Quantity, and Cost)

12.4.2 Description of all de-installation, delivery/transport, and installation services

12.4.3 Warranty and support provisions: Information on all parts and labor provided by the Contractor post-installation and time period of coverage.

12.4.4 Post-Warranty Support: The Contractor shall provide a detailed list of services available to Hopi Health

Care Center after warranty period ends. The Contractor shall include pertinent information such as description of on-site maintenance/repair services available, number of technicians available to Phoenix Area, and warranty period for repair services (including associated parts, service, and clinical components).

13. Location

The Contractor shall deliver all equipment and services to the following location:

13.1 Hopi Health Care Center

Highway 264, Milepost 388 Polacca, AZ 86042

14. A-dec Equipment/Cabinetry and Services

The Contractor shall procure, deliver, and install all A-dec equipment/cabinetry and provide all services listed in the table below. The Contractor shall reference all A-dec Manufacturer item numbers in the submission of offer at the time of solicitation.

Item Quantity A-dec Equipment Description (Including Options/Accessories/Configurations)

A-dec Manufacturer Item #

A-dec 591 - Inspire 42" Full Treatment Console

(Reference MFG Configuration #0458109)

Configuration Identification 0458109 PriceBook Current V0313.9999 Model 591- Inspire Twelve O'clock Console 591 Product Version A V0452.0001 Starting Point 42" V0335.0001 X-Ray Attenuation No X-Ray Attenuation V0357.0002 Delivery System Cabinet Mounted 541/545 V0336.0004 Base Module Width 42" V0344.0004 Base Module Name SB1003-- 42" Base With a Cabinet Mounted 541/545 Delivery System V0341.0391 Lower Position 1 Module Width 14" V0344.0001 Lower Position 1 Module Option 2 Swingout Shelves V0413.0003 Lower Position 1 Module Name DR1002-- Bi-Fold, Side-Open, 2x Swing Out Shelf V0341.0371

Lower Position 2 Module Width 14" V0344.0001 Lower Position 2 Module Option Computer Storage V0413.0002 Lower Position 2 Module Name DR1203-- CPU Storage V0341.0363

Lower Position 2 Hinge Location Right Hinge V0339.0001 Lower Position 3 Module Width 14" V0344.0001 Lower Position 3 Module Option 2 Swingout Shelves V0413.0003 Lower Position 3 Module Name DR1002-- Bi-Fold, Side-Open, 2x Swing Out Shelf V0341.0371

Power Panel Module Width 42" V0344.0004 Power Panel Option ICV Only V0350.0002 Midsection Module Width 42" V0344.0004 Midsection Module Name WA1002-- Wall, 2 Floating Shelves, ICV V0341.0386

ICV Configuration Option 2-11mm HVEs, 1 SE V0567.0001 Upper Module Width 42" V0344.0004 Monitor Mount Yes V0356.0002 Control Center No V0348.0001 Upper Module Name UP1002-- Pass Thru - Wood Back, Wood Front V0341.0306

Upper Hinge Location Right Hinge V0339.0001 Top Extension Module Width 42" V0344.0004 Top Extension Module Option Utility Extension V0413.0033 Top Extension Module Name EX1002-- 16" Utility (42") V0341.0341

Countertop Module Width 42" V0344.0004 Countertop Material Quartz V0352.0001 Countertop Module Name CQ1001-- 42" Quartz Countertop V0341.0360

Countertop Color Bellingham V0473.0776 Cabinet Laminate Color Bridal Blanco V0466.0729 Cabinet Laminate Banding Color Bridal Blanco Edge Banding V0467.0793

Interior Wall Laminate Color Bridal Blanco V0468.0729 Interior Wall Banding Color Bridal Blanco Edge Banding V0469.0793

Exterior Wall Laminate Color Bridal Blanco V0470.0729 Exterior Wall Banding Color Bridal Blanco Edge Banding V0471.0793

Air/Water Quick Disconnects None V0421.0002 Packaging Blanket Wrap Without Pallet V0422.0003 Tailored Solutions UPPERS *Two compartments front and back (instead of stanard 3) to accommodate large cassettes *Hinge on the outside both right and left *3 wooden shelves each side Top Extension *9' tall TS Upcharge

A-dec 591 - Inspire 70" Full Treatment Console

(Reference MFG Configuration #0458111)

Configuration Identification 0458111 PriceBook Current V0313.9999 Model 591- Inspire Twelve O'clock Console 591 Product Version A V0452.0001 Starting Point 70" V0335.0003 X-Ray Attenuation No X-Ray Attenuation V0357.0002 Alcove Location Right V0047.0003 Sink Module Location No Sink V0340.0003

Delivery System Cabinet Mounted 541/545 V0336.0004 Base Module Width 70" V0344.0007 Base Module Name SB1006-- 70" Base With a Cabinet Mounted 541/545 Delivery System V0341.0394

Lower Position 1 Module Width 14" V0344.0001 Lower Position 1 Module Option 2 Swingout Shelves V0413.0003 Lower Position 1 Module Name DR1002-- Bi-Fold, Side-Open, 2x Swing Out Shelf V0341.0371

Lower Position 2 Module Width 14" V0344.0001 Lower Position 2 Module Option Computer Storage with 5" Top Drawer V0413.0001

Lower Position 2 Module Name DR1204-- CPU Storage, 5" Drawer V0341.0368

Lower Position 2 Hinge Location Right Hinge V0339.0001 Lower Position 3 Module Width 14" V0344.0001 Lower Position 3 Module Option 7.5"-- 7.5"-- 7.5" Drawer Module V0413.0008

Lower Position 3 Module Name DB1103-- 7.5"-- 7.5"-- 7.5" Drawers V0341.0385

Lower Position 4 Module Width 14" V0344.0001 Lower Position 4 Module Option 5"-- 5"-- 5"-- 7.5" Drawer Module V0413.0006

Lower Position 4 Module Name DB1101-- 5"-- 5"-- 5"-- 7.5" Drawers V0341.0367

Lower Position 5 Module Width 14" V0344.0001 Lower Position 5 Module Option 2 Shelves V0413.0060 Lower Position 5 Module Name DR1202-- Door Storage, 2 Shelves V0341.0364

Lower Position 5 Hinge Location Right Hinge V0339.0001 Power Panel Module Width 70" V0344.0007 Power Panel Option ICV Only V0350.0002 Alcove Module Width 28" V0344.0003 Alcove Module Name WA1100-- Alcove V0341.0483 Soap And Sanitizer Option None V0420.0004 Midsection Module Width 70" V0344.0007 Midsection Module Name WA1002-- Wall, 2 Floating Shelves, ICV V0341.0386

ICV Configuration Option 2-11mm HVEs, 1 SE V0567.0001 Upper Position 1 Module Width 42" V0344.0004 Monitor Mount Yes V0356.0002 Control Center No V0348.0001 Upper Position 1 Module Name UP1005-- Non-Pass Thru, Wood Front V0341.0301

Upper Position 1 Hinge Location Left Hinge V0339.0002 Upper Position 2 Module Width 28" V0344.0003 UP2 Dispenser Door Style Wood Doors V0347.0002

Upper Position 2 Module Name DS1002-- Dispenser, Wood Doors, 2X Gloves V0341.0178

Top Extension Maodule Width 70" V0344.0007 Top Extension Module Option Utility Extension V0413.0033 Top Extension Module Name EX1004-- 16" Utility (70") V0341.0340

Countertop Module Width 70" V0344.0007 Countertop Material Quartz V0352.0001 Countertop Module Name CQ1008-- 70" Quartz Countertop, No Sink V0341.0485

Countertop Color Bellingham V0473.0776 Cabinet Laminate Color Bridal Blanco V0466.0729 Cabinet Laminate Banding Color Bridal Blanco Edge Banding V0467.0793

Interior Wall Laminate Color Bridal Blanco V0468.0729 Interior Wall Banding Color Bridal Blanco Edge Banding V0469.0793

Exterior Wall Laminate Color Bridal Blanco V0470.0729 Exterior Wall Banding Color Bridal Blanco Edge Banding V0471.0793

Air/Water Quick Disconnects None V0421.0002 Packaging Blanket Wrap Without Pallet V0422.0003 Tailored SolutionsUPPERS *Two compartments front and back (instead of standard 3) to accommodate large cassettes

* Hinge on the outside both right and left

* 3 wooden shelves each side Top Extension

* 9' tall

TS Upcharge

A-dec 545 - 12 O'Clock Assistant's

Instrumentation (MFG Configuration #0458112)

Configuration Identification 0458112 PriceBook Current V0313.9999 Model 545 Assistant's Instrumentation 545 Quick Ship Not Eligible V0412.0001 Preconfigured Packages Not Eligible V0568.0001 Base Color White V0009.0002 Foundation Price 545 12 O'Clock Assistant's Instrumentation V0195.0125 Voltage 120 Volts V0074.0002 Mounting Style A-dec Inspire 591 or Preference Mount 5580/5562/5662 V0055.0001 Work Surface Material Quartz V0161.0005 Work Surface Color Quartz Color To Follow V0162.0145 Work Surface Color To Follow V0564.9998 Countertop Price Quartz Price V0334.0004 Air & Self Contained Water QDs V0003.0010 300W 120V Power Supply V0060.0006 Packaging Standard (Boxed) V0327.0004

Assistants Instrumentation Holders V0404.0001 Assistant's Touchpad Standard Touchpad V0007.0002 Autoclavable QD Syringe V0105.0005 No Curing Light V0004.0023 Assistant's Curing Light Holder None V0462.0002 Dual Turret V0403.0001 HVE Standard 11mm HVE V0200.0005 Additional 11mm HVE V0087.0007 Vacuum Tubing Style EasyFlex Tubing V0500.0004

A-dec 541 -12 O'Clock Duo Delivery System (MFG Configuration

#0458113)

Configuration Identification 0458113 PriceBook Current V0313.9999 Model 541 Duo Delivery System 541 Quick Ship Not Eligible V0412.0001 Preconfigured Packages Not Eligible V0568.0001 Product Version B V0452.0002 Base Color White V0009.0002 Foundation Price 541B 12 O'Clock Duo with Deluxe Plus Touchpad V0195.0268 Voltage 120 Volts V0074.0002 Mounting Style A-dec Inspire 591 or Preference Mount 5580/5562/5662 V0055.0001

Work Surface Material Quartz V0161.0005 Work Surface Color Bellingham V0162.0776 Countertop Price Quartz Price V0334.0004 Disc Foot Control V0041.0008 Air & Self Contained Water QDs V0003.0010 300W 120V Power Supply V0060.0006 Packaging Standard (Boxed) V0327.0004 Handing Right V0128.0001 Doctor's Touchpad Deluxe Plus Touchpad V0036.0010 Handpiece Tubing Style Silicone Handpiece Tubing V0330.0002 Position 1 Autoclavable QD Syringe V0267.0005 Position 2 KaVo Electric Motor V0267.0103 Position 3 6-Pin Tubing V0267.0001 Position 4 4-Hole Tubing V0267.0002 Position 5 Cavitron Steri-Mate 360 Ultrasonic V0267.0107 EMC-703 Control Module V0053.0009 A-dec Powered USB Hub V0504.0001 Assistant's Touchpad Standard Touchpad V0007.0002 Autoclavable QD Syringe V0105.0005 No Curing Light V0004.0023 Assistant's Curing Light Holder None V0462.0002 Dual Turret V0403.0001 HVE Standard 11mm HVE V0200.0005

Additional 11mm HVE V0087.0007 Vacuum Tubing Style EasyFlex Tubing V0500.0004 Water Bottle Mount Right Handed V0572.0003

A-dec 592 - Inspire 128" Full Central Console

(Reference MFG Configuration #0458114)

Configuration Identification 0458114 PriceBook Current V0313.9999 Model 592- Inspire Central 592 Product Version A V0452.0001 Starting Point 128" Full Central V0335.0011 X-Ray Attenuation No X-Ray Attenuation V0357.0002 Soap And Sanitizer Option None V0420.0004 Delivery System No Delivery V0336.0002 Base Module Width 128" V0344.0013 Base Module Name SB2000-- Base V0341.0410 Sink Module Width 26" V0344.0005 Faucet Activation Front Only V0415.0002 Sink Module Name SK2001-- Sink Module w/Toe Activation V0341.0217 Dispenser Module Width 10" V0344.0017 DS1 Dispenser Door Style Wood Doors with 2 Glove Dispensers V0347.0003 Dispenser Module Name DS2002-- T-Wall Dispenser, Wood Doors, 2X Gloves V0341.0180 Lower Position 1 Module Width 14" V0344.0001 Lower Position 1 Module Option 5"-- 5"-- 5"-- 7.5" Drawer Module V0413.0032 Lower Position 1 Module Name DB2001-- 5"-- 5"-- 5"-- 7.5" Drawer Bank / False Panel V0341.0107 Lower Position 1 Module Orientation Bottom Drawer/Door Opens To A side V0353.0002 Lower Position 2 Module Width 14" V0344.0001 Lower Position 2 Module Option 5"-- 5"-- 5"-- 7.5" Drawer Module V0413.0032 Lower Position 2 Module Name DB2001-- 5"-- 5"-- 5"-- 7.5" Drawer Bank / False Panel V0341.0107 Lower Position 2 Module Orientation Bottom Drawer/Door Opens To B side V0353.0001 Lower Position 3 Module Width 14" V0344.0001 Lower Position 3 Module Name DB2101-- Barrier Dispenser / False Panel V0341.0446 Lower Position 3 Module Orientation Bottom Drawer/Door Opens To A side V0353.0002 Privacy Panel Module Width 42" V0344.0004 Privacy Panel Location A-Side V0416.0002 Midsection Module Width 42" V0344.0004 Midsection Module Name WA2103-- Midsection Privacy Panel, 1 Floating Shelf V0341.0457 Shelf Location Shelf Located on B side V0417.0001

Sink Wall Power Panel Option None V0418.0002 Power Panel Module Name WA2001-- Sink Wall, Power Panel V0341.0230 ICV Configuration Option No ICV V0567.0004 Upper Module Width 42" V0344.0004 Upper Doors Style Extended Height Wood Doors V0414.0005 Upper Module Name UP2016-- Upper Storage, Wood Door, 8x Gloves, Full Height V0341.0456 Equip. Lower Position 1 Module Width 14" V0344.0001 Equip. Lower Position 1 Module Option Trash, Dual Wipes, Sharps Door Storage V0413.0021 Equip. Lower Position 1 Module Name DR2001-- Door Storage, Trash, Wipes, Sharps / Door V0341.0158 Equip. Lower Position 2 Module Width 14" V0344.0001 Equip. Lower Position 2 Module Option 1 Shelf with Backside Door V0413.0022 Equip. Lower Position 2 Module Name DR2002-- Door Storage, Shelf / Door V0341.0159 Equip. Lower Position 3 Module Width 14" V0344.0001 Equip. Lower Position 3 Module Option 1 Shelf with Backside Door V0413.0022 Equip. Lower Position 3 Module Name DR2002-- Door Storage, Shelf / Door V0341.0159 Equip. Storage Module Width 56" V0344.0006 Equip. Storage Bi-Fold X-rayDoor Style Wood Doors V0566.0002 Equip. Storage Module Name EQ2001-- X-Ray Mounting, Wood Door V0341.0189 X-ray Cutout Cutout To Follow V0464.9999 Countertop Module Width 26" V0344.0005 Countertop Material Quartz V0352.0001 Sink Package Undermount Stainless Steel V0351.0003 Countertop Module Name CQ2101-- 26" Quartz Countertop, Under Mount SS V0341.0435 Mid Countertop Module Width 42" V0344.0004 Mid Countertop Module Name CQ2003-- 42" Quartz Countertop V0341.0024 Countertop Color Bellingham V0473.0776 Cabinet Laminate Color Bridal Blanco V0466.0729 Cabinet Laminate Banding Color Bridal Blanco Edge Banding V0467.0793 Interior Wall Laminate Color Bridal Blanco V0468.0729 Interior Wall Banding Color Bridal Blanco Edge Banding V0469.0793 Exterior Wall Laminate Color Bridal Blanco V0470.0729 Exterior Wall Banding Color Bridal Blanco Edge Banding V0471.0793 Air/Water Quick Disconnects None V0421.0002 Packaging Blanket Wrap Without Pallet V0422.0003

Tailored SolutionsSoffit extension - Total cabinet height to be 9' tall with soffit extension. TS Upcharge

A-dec 592 - Inspire 128" Full Central Console

(Reference MFG Configuration #0458115)

Configuration Identification 0458115 PriceBook Current V0313.9999 Model 592- Inspire Central 592 Product Version A V0452.0001 Starting Point 128" Full Central V0335.0011 X-Ray Attenuation No X-Ray Attenuation V0357.0002 Soap And Sanitizer Option None V0420.0004 Delivery System No Delivery V0336.0002 Base Module Width 128" V0344.0013 Base Module Name SB2000-- Base V0341.0410 Sink Module Width 26" V0344.0005 Faucet Activation Front Only V0415.0002 Sink Module Name SK2001-- Sink Module w/Toe Activation V0341.0217 Dispenser Module Width 10" V0344.0017 DS1 Dispenser Door Style Wood Doors with 2 Glove Dispensers V0347.0003 Dispenser Module Name DS2002-- T-Wall Dispenser, Wood Doors, 2X Gloves V0341.0180 Lower Position 1 Module Width 14" V0344.0001 Lower Position 1 Module Option 5"-- 5"-- 5"-- 7.5" Drawer Module V0413.0032 Lower Position 1 Module Name DB2001-- 5"-- 5"-- 5"-- 7.5" Drawer Bank / False Panel V0341.0107 Lower Position 1 Module Orientation Bottom Drawer/Door Opens To A side V0353.0002 Lower Position 2 Module Width 14" V0344.0001 Lower Position 2 Module Option 5"-- 5"-- 5"-- 7.5" Drawer Module V0413.0032 Lower Position 2 Module Name DB2001-- 5"-- 5"-- 5"-- 7.5" Drawer Bank / False Panel V0341.0107 Lower Position 2 Module Orientation Bottom Drawer/Door Opens To B side V0353.0001 Lower Position 3 Module Width 14" V0344.0001 Lower Position 3 Module Name DB2101-- Barrier Dispenser / False Panel V0341.0446 Lower Position 3 Module Orientation Bottom Drawer/Door Opens To A side V0353.0002 Privacy Panel Module Width 42" V0344.0004 Privacy Panel Location A-Side V0416.0002 Midsection Module Width 42" V0344.0004 Midsection Module Name WA2103-- Midsection Privacy Panel, 1 Floating Shelf V0341.0457 Shelf Location Shelf Located on B side V0417.0001 Sink Wall Power Panel Option None V0418.0002

Power Panel Module Name WA2001-- Sink Wall, Power Panel V0341.0230 ICV Configuration Option No ICV V0567.0004 Upper Module Width 42" V0344.0004 Upper Doors Style Extended Height Wood Doors V0414.0005 Upper Module Name UP2016-- Upper Storage, Wood Door, 8x Gloves, Full Height V0341.0456 Equip. Lower Position 1 Module Width 14" V0344.0001 Equip. Lower Position 1 Module Option Trash, Dual Wipes, Sharps Door Storage V0413.0021 Equip. Lower Position 1 Module Name DR2001-- Door Storage, Trash, Wipes, Sharps / Door V0341.0158 Equip. Lower Position 2 Module Width 14" V0344.0001 Equip. Lower Position 2 Module Option 1 Shelf with Backside Door V0413.0022 Equip. Lower Position 2 Module Name DR2002-- Door Storage, Shelf / Door V0341.0159 Equip. Lower Position 3 Module Width 14" V0344.0001 Equip. Lower Position 3 Module Option 1 Shelf with Backside Door V0413.0022 Equip. Lower Position 3 Module Name DR2002-- Door Storage, Shelf / Door V0341.0159 Equip. Storage Module Width 56" V0344.0006 Equip. Storage Bi-Fold X-rayDoor Style Wood Doors V0566.0002 Equip. Storage Module Name EQ2003-- Split Storage System, Wood Door V0341.0191 Countertop Module Width 26" V0344.0005 Countertop Material Quartz V0352.0001 Sink Package Undermount Stainless Steel V0351.0003 Countertop Module Name CQ2101-- 26" Quartz Countertop, Under Mount SS V0341.0435 Mid Countertop Module Width 42" V0344.0004 Mid Countertop Module Name CQ2003-- 42" Quartz Countertop V0341.0024 Countertop Color Bellingham V0473.0776 Cabinet Laminate Color Bridal Blanco V0466.0729 Cabinet Laminate Banding Color Bridal Blanco Edge Banding V0467.0793 Interior Wall Laminate Color Bridal Blanco V0468.0729 Interior Wall Banding Color Bridal Blanco Edge Banding V0469.0793 Exterior Wall Laminate Color Bridal Blanco V0470.0729 Exterior Wall Banding Color Bridal Blanco Edge Banding V0471.0793 Air/Water Quick Disconnects None V0421.0002 Packaging Blanket Wrap Without Pallet V0422.0003 Tailored SolutionsSoffit extension - Total cabinet height to be 9' tall with soffit extension. TS Upcharge

A-dec 593 - Inspire 84" Lower Side Console

(Reference MFG Configuration #0458116)

Configuration Identification 0458116 PriceBook Current V0313.9999 Model 593- Inspire Side Support 593 Product Version A V0452.0001 Starting Point 84" Lower Only V0335.0012 Cabinet Depth 19" V0346.0001 Countertop Height 34" V0345.0001 Sink Module Location Left V0340.0001 Delivery System No Delivery V0336.0002 Left Endcap Flat Left Endcap V0204.0193 Right Endcap Flat Right Endcap V0366.0192 Soap And Sanitizer Option None V0420.0004 Base Module Width 84" V0344.0008 Base Module Name SB3000-- Base V0341.0409 Lower Position 1 Module Width 28" V0344.0003 Plumbing Location Wall V0355.0002 Lower Position 1 Module Name SK3001-- Sink Module V0341.0218 Lower Position 2 Module Width 28" V0344.0003 Lower Position 2 Module Option 5"-- 7.5"-- 7.5" 7.5" Drawer Module V0413.0011 Lower Position 2 Module Name DB3004-- 5"-- 7.5"-- 7.5"-- 7.5" Drawers V0341.0114 Lower Position 3 Module Width 14" V0344.0001 Lower Position 3 Module Name DB3101-- Drawer, Barrier Dispenser V0341.0447 Lower Position 3 Hinge Location Left Hinge V0339.0002 Lower Position 4 Module Width 14" V0344.0001 Lower Position 4 Module Option 1 Shelf V0413.0007 Lower Position 4 Module Name DR3201-- Door Storage, 1 Shelf V0341.0398 ICV Configuration Option No ICV V0567.0004 Lower Position 4 Hinge Location Right Hinge V0339.0001 Countertop Module Width 84" V0344.0008 Countertop Material Quartz V0352.0001 Sink Package Undermount Stainless Steel V0351.0003 Countertop Module Name CQ3024-- 84" Quartz Countertop, Under Mount SS V0341.0041 Countertop Color Bellingham V0473.0776 Cabinet Laminate Color Bridal Blanco V0466.0729 Cabinet Laminate Banding Color Bridal Blanco Edge Banding V0467.0793 Air/Water Quick Disconnects None V0421.0002 Packaging Blanket Wrap With Pallet V0422.0002

1 Configuration Identification 0458118

A-dec 593 - Inspire 84" Side Console (Reference

MFG Configuration #0458118)

PriceBook Current V0313.9999 Model 593- Inspire Side Support 593 Product Version A V0452.0001 Starting Point 84" Lower Only V0335.0012 Cabinet Depth 19" V0346.0001 Countertop Height 34" V0345.0001 Sink Module Location Right V0340.0002 Delivery System No Delivery V0336.0002 Left Endcap Flat Left Endcap V0204.0193 Right Endcap Flat Right Endcap V0366.0192 Soap And Sanitizer Option None V0420.0004 Base Module Width 84" V0344.0008 Base Module Name SB3000-- Base V0341.0409 Lower Position 1 Module Width 14" V0344.0001 Lower Position 1 Module Option 1 Shelf V0413.0007 Lower Position 1 Module Name DR3201-- Door Storage, 1 Shelf V0341.0398 ICV Configuration Option No ICV V0567.0004 Lower Position 1 Hinge Location Right Hinge V0339.0001 Lower Position 2 Module Width 14" V0344.0001 Lower Position 2 Module Option Sharps and Wipes Storage V0413.0010 Lower Position 2 Module Name DR3202-- Door Storage, Sharps, Wipes V0341.0399 ICV Configuration Option No ICV V0567.0004 Lower Position 2 Hinge Location Right Hinge V0339.0001 Lower Position 3 Module Width 28" V0344.0003 Lower Position 3 Module Option 5"-- 7.5"-- 7.5" 7.5" Drawer Module V0413.0011 Lower Position 3 Module Name DB3004-- 5"-- 7.5"-- 7.5"-- 7.5" Drawers V0341.0114 Lower Position 4 Module Width 28" V0344.0003 Plumbing Location Wall V0355.0002 Lower Position 4 Module Name SK3001-- Sink Module V0341.0218 Countertop Module Width 84" V0344.0008 Countertop Material Quartz V0352.0001 Sink Package Undermount Stainless Steel V0351.0003 Countertop Module Name CQ3024-- 84" Quartz Countertop, Under Mount SS V0341.0041 Countertop Color Bellingham V0473.0776 Cabinet Laminate Color Bridal Blanco V0466.0729 Cabinet Laminate Banding Color Bridal Blanco Edge Banding V0467.0793 Air/Water Quick Disconnects None V0421.0002 Packaging Blanket Wrap With Pallet V0422.0002

A-dec 593 - Inspire 70" Side Console (Reference

MFG Part 0458120)

Configuration Identification 0458120 PriceBook Current V0313.9999 Model 593- Inspire Side Support 593 Product Version A V0452.0001 Starting Point 70" Lower Only V0335.0015 Cabinet Depth 19" V0346.0001 Countertop Height 34" V0345.0001 Sink Module Location Left V0340.0001 Delivery System No Delivery V0336.0002 Left Endcap Flat Left Endcap V0204.0193 Right Endcap Flat Right Endcap V0366.0192 Soap And Sanitizer Option None V0420.0004 Base Module Width 70" V0344.0007 Base Module Name SB3000-- Base V0341.0409 Lower Position 1 Module Width 28" V0344.0003 Plumbing Location Wall V0355.0002 Lower Position 1 Module Name SK3001-- Sink Module…