SOW EOC Box_18APR_UPDATED_Redacted.pdf
PDF 250 KB Posted
- Solicitation number
- N0024426Q0084
About this file
This is a Statement of Work for USS Makin Island (LHD-8) requesting the procurement and delivery of a new Electronic Overcurrent Box 1606 (part number 751398-K01). The contractor is responsible for ordering the replacement EOC 1606 Box and ensuring its delivery to the ship's specified address at Naval Base San Diego. The EOC Box is needed to replace a broken unit that has been causing a load center to constantly trip at very low current rating levels.
The contractor must deliver the EOC 1606 Box in new condition to: USS MAKIN ISLAND LHD8, BLDG 3581 MPC DLA DISTRIBUTION SAN DIEGO, CUMMINGS ROAD, SAN DIEGO CA. 92136. Ship's force will inspect the delivered equipment upon arrival to verify it meets the "new condition" requirement and will conduct operational testing and installation. Work is considered complete upon successful delivery and inspection. The contractor is liable for failure to mail the equipment and for any non-compliance with the new condition specification. Invoicing should reference R23171 USS MAKIN ISLAND (LHD8), UNIT 100222 BOX 101 FPO, AP 96672. The place of performance is USS MAKIN ISLAND LHD8, located at Naval Base San Diego, Pier 8. No salvage parts are requested under this statement of work.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sources Sought EOC Box.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
USS MAKIN ISLAND (LHD-8)
Order new Electronic Overcurrent Box 1606
Reference: TECHNICAL MANUAL 4 ACTRON CIRCUIT BREAKERS NAVY TYPE ACB-1606 HRC, INSTRUCTION MANUAL
Introduction: USS Makin Island (LHD-8) is requesting to order a new condition EOC 1606 box with part number 751398-K01. Ship’s force will install and conduct an operational test.
Background: USS MAKIN ISLAND requires a new condition EOC Box to install in one of our Load
Centers. Ship’s Force will install and op-test upon receipt. It will prevent the affected load center from constantly tripping at a very low current rating level due to having a broken EOC box.
General Requirements for Inspection, repair and install:
1.1 Order replacement EOC 1606 Box from Contractor.
1.2 Ensure it gets delivered USS MAKIN ISLAND LHD8 via packing address
2.0 Salvage Parts: Not requested.
3.0 PACKING/PICK-UP/Delivery:
Company will send the material to:
USS MAKIN ISLAND LHD8
BLDG 3581 MPC DLA DISTRIBUTION SAN DIEGO
CUMMINGS ROAD
SAN DIEGO CA. 92136
4.0 Inspection and Acceptance:
4.1 Ship’s force will inspect EOC 1606 Box upon arrival to ensure it meets the description of being “new condition” as advertised. Ship’s Force will accept work complete once new condition EOC 1606 box is delivered to ship and meets this criterion.
5.0 Compliance and Standards:
5.1 The contractor shall be liable for failure to mail the inverter and if EOC Box does not appear to be in new condition as described.
6.0 Invoicing and Payment:
R23171 USS MAKIN ISLAND (LHD8)
UNIT 100222 BOX 101 FPO, AP 96672
EMAIL:
PHONE:
7.0 Place of Performance: (Shipping location and installation onboard USS Makin Island)
USS MAKIN ISLAND LHD8: Located at Naval Base San Diego, Pier 8
8.0 USS MAKIN ISLAND Point of Contacts:
File details come from the government source that posted it. Updated .