SOW.pdf

Statement of Work (SOW)

For

Purchase of Limited Attenuator Switch

Requirement #: WXS-0160

Distribution Statement D: Distribution authorized to Department of Defense and U.S. DoD contractors only (Administrative or

Operational Use) (04 April 2019). Other requests shall be referred to Naval Surface Warfare Center, Crane Division;

Airborne Electronic Attack Systems Division; Building 3330C, Code WXS; 300 Highway 361; Crane, IN 47522-5001."

1.0 SCOPE

This Statement of Work (SOW) is for the purchase of parts supporting the AN/ALQ-218 Tactical Jamming System

Receiver (TJSR), and variant and derivatives of the TJSR. The parts purchased shall be used to support Depot

Repairs.

2.0 BACKGROUND

NSWC Crane has been designated by the Joint Depot Maintenance Activities Group (via the Depot Source of Repair

Process) as the Organic Depot Repair Facility and chartered by the F/A-18 and EA-18G Program Office (PMA-265) as the FST for the AN/ALQ-218 TJSR.

This attenuator is part of a critical component that provides advanced electronic attack capability for the

Navy’s EA18G Growler aircraft. The AN/ALQ-218 serves to locate and disrupt enemy communication channels through the use of the EA-18G’s jamming components. The Contractor shall provide 10 each of

P/N: MD-170K001 Limited Attenuator Switch.

3.0 NON-PERSONAL SERVICES

This SOW identifies services that are strictly non-personal in nature.

4.0 APPLICABLE DOCUMENTS

DD FORM 254

5.0 REQUIREMENTS

• The contractor is required to maintain a SECRET facility security clearance.

• The contractor is required to maintain a level of safeguarding for classified information/material at the

SECRET level.

• The contractor is required to protect critical information associated with this contract to prevent unauthorized disclosure and will observe OPSEC requirements.

• The contractor will assist in modernizing systems that are classified. Techniques to modernize this equipment, testing of this equipment and overall system performance could be classified and the subject to email and written reports. In this capacity, the contractor will generate and be in receipt of classified material.

• The contractor shall provide purchase quantity of the Integrated Microwave Assembly(s) in accordance with manufacture source control drawings for the part numbers described in the table below.

• The contractor shall ship assets to NSWC Crane as per contract.

CLIN Nomenclature Base P/N CAGE

Code

Total

Qty

Unit

Quote

Options/Notes Total

0001 Purchase Limited

Attenuator

Switch

MD-

170K001

32187 10 $34,988.

Support of the AEA-

18G Program

$349,888.7

6.0 COUNTERFEIT PARTS AND MATERIAL

Counterfeit materiel is a serious threat to the safety and operational effectiveness of DoD systems. The Contractor

(and subcontractors at all tiers) shall implement a risk mitigation process when obtaining critical or high risk materiel in accordance with paragraphs (a) and (b) below:

(a) If the materiel is currently in production or currently available, the materiel shall be obtained only from authorized sources. Authorized sources are the original manufacturer, a source with the express written authority of the original manufacturer or current design activity, or an authorized aftermarket manufacturer.

(b) If the materiel is not in production or currently available from authorized sources, the materiel shall be obtained from suppliers that meet appropriate counterfeit avoidance criteria. Counterfeit avoidance criteria can be found in the following Industry Standards - SAE AS5553C, SAE AS6081, SAE AS6174A, SAE

ARP6178, SAE AS6462B, and SAE AS6301.

The Contractor shall notify the Contracting Officer when critical or high risk materiel cannot be obtained from an authorized source. The Contractor shall take mitigating actions to authenticate the materiel if purchased from another source.

The Contractor shall report instances of counterfeit and suspect counterfeit materiel to the Contracting

Officer and the Government-Industry Data Exchange Program (GIDEP) as soon as the Contractor becomes aware of the issue.

7.0 SHIPPING ADDRESS

Naval Surface Warfare Center (NSWC), Crane Division

Code WXS, Bldg. 3330C

300 Highway 361

Crane, IN 47522-5001

Technical Points of Contact:

Cody Coulter, cody.l.coulter.civ@us.navy.mil. 812-854-4896

Daniel Steele, daniel.r.steele10.civ@us.navy.mil, 812-854-5067 mailto:cody.l.coulter.civ@us.navy.mil mailto:daniel.r.steele10.civ@us.navy.mil