SoW.pdf
PDF 125 KB Posted
- Attached to
- Airfield markings and Rubber Removal Federal contract opportunity
- Solicitation number
- FA466125Q0003
About this file
This document is a Statement of Work for a federal contract opportunity related to rubber removal and airfield markings at Dyess Air Force Base in Texas. The scope of work includes performing rubber removal on runways 16/34 and 164/344, as well as painting airfield markings as indicated in the attached drawings. The work must be completed in two phases, with the first phase focusing on the Tye LZ and the second phase on runway 16/34. The contractor must coordinate with the Contracting Officer, Airfield Management, and Civil Engineering to schedule the work, which is limited to weekends due to ongoing airfield operations. The performance period is 210 calendar days. The related federal contract opportunity, Solicitation Number FA466125Q0003, is a Pre-Solicitation for this requirement with an estimated value between $100,000 and $250,000. The contracting agency is the Department of the Air Force Global Strike Command.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Attachment 1 Specifications.pdf | ||
| Attachment 2 Drawings.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
FOR OFFICIAL USE ONLY
Statement of Work September 12, 2024
Project #: _FNWZ 24-0129 Rubber Removal & Airfield Markings
Civil Engineering Point of Contact (Name/phone #): Davis Matschek 325-696-5620__
Scope of Work: 1- Perform rubber removal as indicated in attached drawings C1 through C7 and per specifications at runways 16/34 and 164/344. 2- Paint airfield markings as indicated in the attached contract drawings C1 through C7 and specifications.
Phasing Requirements: This contract shall be performed in several phases on coordination with the Contracting Officer (CO), Airfield Management (AM), and Civil Engineering (CE). Access to all work areas is limited by ongoing airfield operations. Contractor shall coordinate work at each location with the Airfield Manager. Rubber removal shall be completed in two phases:
Phase 1: Perform rubber removal at runways 16/34 and 164/344 (Tye LZ); weekend work only Phase 2: Perform rubber removal at runway 16/34, must be completed 6-months after the completion of Phase 1.
Special Requirements/Security/Submittals: Contractor shall coordinate with the Contracting Officer and Airfield Manager, at least 45 days prior, for approved weekends when rubber removal and markings will be allowed.
Project is in a General/Controlled Area: Work under this contract is located on the airfield.
Access to it is subject to operations requirements and only after it has been coordinated with the CO in conjunction with the AM and 7 CES. Airfield Markings - Contact with the Tower is required during work in controlled movements areas. Contractor to request radio from Airfield Management.
Performance Time/Desired Project Completion Date: 210 calendar days
File details come from the government source that posted it. Updated .