SOW DNA Lab Furniture for Honduras.pdf

U.S Department of State (DOS)

Bureau of International Narcotics and Law Enforcement Affairs (INL) U.S. Embassy – Tegucigalpa, Honduras

Laboratory Furniture for Forensic Medicine Directorate Morgue in Tegucigalpa in

Support of Law Enforcement

SECTION 1

SOLICITATION CONSIDERATIONS

1.1 SYSTEM FOR AWARD MANAGEMENT

This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to FAR 4.1102 and other applicable regulations and guidelines. Information can be found at www.sam.gov.

1.2 TRADE AGREEMENTS ACT (19 U.S.C. 2512(A)) (TAA)

Pursuant to the Trade Agreements Act (19 U.S.C. 2512(a)) (TAA), Federal acquisitions of supplies may be made only from offerors that shall supply products of an eligible country under any of the free trade agreements entered into pursuant to the TAA.

An article is considered a product of a country only if it is wholly a product of that country or if it has been, substantially transformed, in that country into a new and different article of commerce with a name, character, or use distinct from that of the original article(s). Note that any item that is a discreet article as it is sold in commerce, regardless of its ultimate function or use, cannot be considered, substantially transformed, and based solely on its integration into IT or other systems

1.3 UNAUTHORIZED DISCLOSURE

The Contractor and its employees shall exercise the utmost discretion concerning all matters relating to their duties and functions. They shall not communicate to any person any information known to them by reason of their performance of services under this contract, which has not been made public, except in the necessary performance of their duties or upon written authorization of the Contracting Officer.

All documents and records (including photographs) generated during the performance of work under this contract shall be for the sole use and become the exclusive property of the U.S Government. Furthermore, no article, book, pamphlet, email, recording, broadcast, speech television appearance, film or photograph concerning any aspect of work performed under this contract shall be published or disseminated through any media without the prior written authorization of the Contracting Officer. These obligations do not cease upon the expiration or termination of this contract. The Contractor shall include the substance of this provision in all contracts of employment and in all subcontracts hereunder.

See FAR 3.104 for additional information.

SECTION 2

INSTRUCTIONS, CONDITIONS, AND NOTICES TO OFFERORS/RESPONDENTS

SUBMISSION INFORMATION PERTAINING TO REQUEST FOR QUOTE

2.1 INFORMATION TO CONTRACTOR

Contractors are reminded that information furnished under this Request for Quote (RFQ) may be subject to disclosure under the Freedom of Information Act (FOIA).

Therefore, all items that are confidential to business or that contain trade secrets or proprietary or personnel information shall be clearly marked. Marking of items shall not necessarily preclude disclosure when Department of State (DOS) determines disclosure is warranted by FOIA. However, if such items are not marked, all information contained within the submitted documents shall be deemed releasable.

2.2 QUESTIONS CONCERNING THE REQUEST FOR PROPOSAL

Offerors are warned against contacting any INL personnel other than the Contracting Officer and Contract Specialist prior to award of the Contract resulting from this RFQ.

If such a contact occurs and found to be prejudicial to competing vendors, the vendor making such a contact may be excluded from award consideration.

No information concerning this RFQ shall be provided in response to telephone calls.

All such requests shall be submitted in writing to the Contracting Officer and Contract Specialist.

Any communications in reference to this RFQ shall cite the reference section title and page number, and directed to the following individuals:

Name: Kelly Byers Title: Contracting Officer E-mail: byerskl@state.gov

Name: Paola Arevalo Title: Contracting Officer Representative E-mail: SosaAX@state.gov

All offers shall be submitted to the Contracting Officer and Contract Specialist via email.

2.3 NOTICE OF SAM.GOV SYNOPSIS CLOSING DATE AND TIME

mailto:SosaAX@state.gov

Closing Date and Time:

• 5:00 P.M. (local Washington D.C. time) on the following date: XXX XXXXX 2023.

2.4 CONTRACTOR RELATIONSHIPS

The Department of State (DOS) encourages the use of subcontractors. In addition, the Department requires that any potential Organization Conflict of Interest be identified in the proposal to ensure proper firewalls established prior to award.

2.5 MULTIPLE PROPOSALS/ALTERNATIVE SOLUTIONS

Contractors shall not submit, nor shall the Government accept or evaluate, multiple proposals offering alternative solutions. Contractors shall not submit, nor shall the Government accept or evaluate, multiple solutions within one proposal.

2.6 PERIOD OF ACCEPTANCE OF OFFERS

Contractors shall agree, if the proposal is accepted within ninety (90) calendar days (unless a greater period is inserted by the contractor) from the date specified in the solicitation for receipt of proposals, to furnish any or all of the requirements upon which prices are proposed at the price set opposite each item, performed and/or delivered at the designated point(s) within the time specified.

2.7 SPECIFIC SUBMISSION INSTRUCTIONS

Quotes should be written in English and prices must be reflected in dollars.

Vendors shall limit the number of pages to no more than fifteen (15), 12 Point Font, Times New Roman, pdf.

All offers shall be submitted to the designated Government Representative via email.

SECTION 3

DESCRIPTION OF REQUIREMENTS

GENERAL

The Bureau of International Narcotics and Law Enforcement Affairs (INL) is an instrumental leader in the development of policies and programs to combat international narcotics and crime. INL programs support two of the Department of States' strategic goals: (1) to reduce the entry of illegal drugs into the United States;

and (2) to minimize the impact of international crime on the United States and its citizens. One of the many ways to effectively meet these goals is to partner with allied governments both directly and indirectly to promote the modernization of and support the enforcement operations of their foreign criminal justice systems and law enforcement agencies.

The INL-H Section of the US Embassy Tegucigalpa, Honduras, is responsible for providing assistance to the host government to develop and implement effective counter narcotics, anticrime, and border control programs. INL-H works closely with US law enforcement agencies to ensure that Honduras has the training and the tools needed to combat illicit drug traffic and transnational organized crime. INL also works with various Government of Honduras (GOH) institutions including Public Ministry, Secretariat of Presidency, National Banking and Insurance Commission, the Secretariat of Security and its various specialized units, Supreme Court of Justice, Ministry of Health, Ministry of Education, Honduran Immigration Department, and the Honduran Customs.

DESCRIPTION

The International Narcotics Affairs Section (INL - U.S. Embassy, Honduras) requires the purchase and one-time installation of Laboratory Furniture, as provided in the specifications attached.

The contractor shall provide the proposed products in accordance with the conditions, requirements, and specifications of this SOW.

THE SCHEDULE

1. ACQUISITION METHOD

This contract is issued as Firm-Fixed-Price contract.

1.1 TYPE OF CONTRACT

This requirement will result in the award of a Firm Fixed Price (FFP) contract in accordance with the specifications in Section 3 of this Statement of Work (SOW). No additional sums will be payable due to any escalation in the cost of materials, equipment, or labor, or because of the Contractor’s failure to properly estimate or accurately predict the prices or difficulty of achieving the results required by this contract. Nor will the contract price be adjusted on account of fluctuations in the currency exchange rates.

2. EFFECTIVE PERIOD OF CONTRACT

This contract shall be effective on the date of the Contracting Officer's signature and shall remain in full force and effect until all Laboratory Furniture is received and accepted by the U.S. Government in accordance with the contract delivery date within 45 calendar days after receipt of award.

3. SUPPLIES AND PRICING

The Contractor shall provide to the U.S. Government the Laboratory Furniture in strict compliance with the specifications at the agreed upon firm fixed price. In the event of non-compliance with the specifications, the U.S. Government reserves the right to demand correction(s) or reject this requirement in its entirety. Additionally, the Contractor shall perform the pre-delivery inspection of the Laboratory Furniture and deliver them to the location set forth in Section 8, Place of Delivery, of this SOW.

The firm fixed price shall include the Laboratory Furniture, pre-delivery inspection, warranty certificates and any other documentation mandated by the destination country.

3.1 SPECIFICATIONS

Note: Plans of layout can be found in Annex A *Below images for reference only AUTOCAD and PDF Documents can be provided upon request

Description

Quantity Unit

1.

Linear Modular Laboratory Benches with Quartz Top (MA05 in areas C Electroforesis, in plans) •Measurements: 241x40x90cm (LxWxH) •Base Material: Melamine •Base Color: White •Top Material: Quartz •Top Color: Dark Gray •Cabinets with sliding doors, modular interior shelves, 8 drawers, silver stainless steel handles and locks.

1 Each

2.

Melamine Shelf (MA03 in areas C Electroforesis, in plans)

• Measurements: 90x60x140cm (LxWxH)

• Material: Melamine 1” thick

• Color: White

• 3 shelves,

• Open back and front, no doors needed.

3.

Corner Laboratory Bench with Quartz Top (ME01 in areas C Electroforesis, in plans)

• Measurements: 100x100x90cm (LxWxH)

• Base Material: Melamine

• Base Color: White

• Top Material: Quartz

• Top Color: Dark Gray

• One Open shelf

2 Each

4.

Linear Modular Laboratory Benches with Quartz Top (MA01 in areas C Electroforesis, in plans)

• Measurements: 122x100x90cm (LxWxH)

• Base Material: Reinforced 2” metal tube structure, to stand 220lb equipment on top.

• Base Color: White

• Top Material: Quartz

• Top Color: Dark Gray

• Swinging doors, interior modular shelf, silver stainless steel handles and locks.

5.

Linear Modular Laboratory Benches with Quartz Top (MC01 in areas C Electroforesis, in plans)

• Measurements: 73x100x90cm (LxWxH)

• Base Material: Metal Tube 2”

• Base Color: White

• Top Material: Quartz

• Open space, no doors or shelves needed.

6.

Linear Modular Laboratory Benches with Quartz Top (MC01 in areas C Electroforesis, in plans)

• Measurements: 90x100x90cm (LxWxH)

• Base Material: Melamine

• Base Color: White

• Top Material: Quartz

• Top Color: Dark Gray

• Swinging doors, interior modular shelf, silver stainless steel handles and locks

7.

Linear Modular Laboratory Benches with Quartz Top (MA02 in areas C Electroforesis, in plans)

• Measurements: 122x100x90cm (LxWxH)

• Base Material: Reinforced 2” metal tube structure, to stand 180lb equipment on top.

• Base Color: White

• Top Material: Quartz

• Open space, no doors or shelves needed.

8.

Linear Modular Laboratory Benches with Quartz Top (MC01 in areas C Electroforesis, in plans)

• Measurements:

96x100x90cm (LxWxH)

• Base Material: Melamine

• Base Color: White

• Top Material: Quartz

• Top Color: Dark Gray

• Swinging doors, interior modular shelf, silver stainless steel

9.

Linear Modular Laboratory Benches with Quartz Top (M-AJ in areas C Electroforesis, in plans)

• Measurements: 50x70x90cm (LxWxH)

• Base Material: Melamine

• Base Color: White

• Top Material: Quartz

• Open space with one modular shelf.

10.

Island with Quartz Top (ML02 in areas C Electroforesis, in plans)

• Measurements:245x79x90cm

(LxWxH)

• Base Material: Melamine

• Base Color: White

• Top Material: Quartz

• Top Color: Dark Gray

• With open modular shelving on lateral sides.

• In the front, it must include bottom, modular, open shelving with swinging doors, on its top a single bowl stainless steel sink and faucet.

1 Each

11.

Desk (D1 in area D Oficina, in plans)

• Surface Area: 122x60x76cm (LxWxH)

• Material: Melamine for the top and metal,1 1/2", square, structure

• Color: Light maple melamine and white metal structure

• Work surface must have one (1) cable cord grommets

• Include a Rolling, 3 – drawer, melamine filing cabinet in white, with stainless steel handles and locks for each desk.

8 Each

12.

Melamine and Glass Partition Between Desks

• Measurements: 100x2.5x138cm (LxthicknessxH)

• Dividing panel between desks

6 Each

• Material: Melamine 1” thick, lower structure with height: 95cm in light maple color On the top structure a10mm thick tempered glass with sandblast paper, and metal supports. height: 43cm

13.

Heavy duty 4-shelf metal shelf (ES2 in area Almacen Menor FTA, in plans)

• Measurements: 223x45.7x182cm

• Material: steel construction with resin finish

• 4-tier

• 800lb weight capacity per tier

14.

Melamine Open Shelf (ES1 in area Closet, in plans)

• Measurements:

149x40x178cm

• Material: Melamine

• With 8 lower open spaces and 2 upper spaces, closed with sliding doors and stainless steel handles and locks.

15.

Linear Modular Laboratory Benches with Quartz Top (ML01 in areas A Extraccion, in plans)

• Measurements: 122x75x90cm

(LxWxH)

• Base Material: Melamine

• Base Color: White

• Top Material: Quartz

• Top Color: Dark Gray

• Includes single bowl stainless steel sink and faucet

• Swinging Doors, 4 drawers with stainless steel handles and locks

1 Each

16. Linear Modular Laboratory Benches with Quartz Top (MC01 in areas A Extraccion, in plans)

• Measurements: 77x75x90cm (LxWxH)

• Base Material: Melamine

• Base Color: White

• Top Material: Quartz

• Top Color: Dark Gray

• Swinging Doors with stainless steel handles and locks

• One modular shelf

17.

Linear Modular Laboratory Benches with Quartz Top (MA04 in

• Measurements: 122x75x90cm

(LxWxH)

• Base Material: Melamine

• Base Color: White

• Top Material: Quartz

• Top Color: Dark Gray

• Swinging Doors with stainless steel handles and locks

• One modular shelf

1 Each

18.

Corner Modular Laboratory Benches with Quartz Top (MF02 in areas A Extraccion, in plans)

• Measurements: 100x75x90cm (LxWxH)

• Base Material: Melamine

• Base Color: White

• Top Material: Quartz

• One modular Shelf

19. Linear Modular Laboratory Benches with Quartz Top (MA01 in

• Measurements: 122x100x90cm (LxWxH)

• Base Material: Reinforced 2” metal tube structure, to stand 220lb equipment on top.

• Base Color: White

• Top Material: Quartz

• Top Color: Dark Gray

• Swinging Doors with stainless steel handles and locks

20.

Linear Modular Laboratory Benches with Quartz Top (MC01 in areas A Extraccion, in plans)

• Measurements: 71x100x90cm (LxWxH)

• Base Material: Metal Tube 2”

• Base Color: White

• Top Material: Quartz

• Open space for chair

21.

Linear Modular Laboratory Benches with Quartz Top (MA04 in areas A Extraccion, in plans)

• Measurements: 122x75x90cm (LxWxH)

• Base Material: Melamine.

• Base Color: White

• Top Material: Quartz

• Top Color: Dark Gray

• Swinging Doors with stainless steel handles and locks

• One modular shelf

22.

Linear Modular Laboratory Benches with Quartz Top (MF01 in

• Measurements: 77x75x90cm (LxWxH)

• Base Material: Melamine.

• Base Color: White

• Top Material: Quartz

• Top Color: Dark Gray

• Swinging Doors with stainless steel handles and locks

• One modular shelf

23.

Linear Modular Laboratory Benches with Quartz Top (MA04 in areas B PCR, in plans)

• Measurements: 122x75x90cm

(LxWxH)

• Base Material: Melamine.

• Base Color: White

• Top Material: Quartz

• Top Color: Dark Gray

• Swinging Doors, 4 drawers with stainless steel handles and locks

24.

Corner Modular Laboratory Benches with Quartz Top (ME02 in areas B PCR, in plans)

• Measurements: 100x75x90cm

(LxWxH)

• Base Material: Melamine.

• Base Color: White

• Top Material: Quartz

25.

Linear Modular Laboratory Benches with Quartz Top (MA01 in areas B PCR, in plans)

• Measurements: 122x100x90cm (LxWxH)

• Base Material: Reinforced 2” metal tube structure, to stand

220lb equipment on top.

• Base Color: White

• Top Material: Quartz

• Top Color: Dark Gray

• Swinging Doors with stainless steel handles and locks

26.

Linear Modular Laboratory Benches with Quartz Top (MC01 in areas B PCR, in plans)

• Measurements: 75x100x90cm

(LxWxH)

• Base Material: Metal Tube 2”

• Base Color: White

• Top Material: Quartz

• Top Color: Dark Gray

• Open space for chair

1 Each

27.

Linear Modular Laboratory Benches with Quartz Top (MF01 in areas B PCR, in plans)

• Measurements: 69x75x90cm (LxWxH)

• Base Material: Melamine.

• Base Color: White

• Top Material: Quartz

• Top Color: Dark Gray

• Swinging Doors with stainless steel handles and locks

• One modular shelf

1 Each

28.

Black Ergonomic Laboratory Chair (B01 in plans)

• Adjustable Height

• With arms

• Black

• Seat Material: fabric

• Back Material: Mesh

• Frame Material: Chrome or PVC

4 Each

29.

Black Ergonomic Office Chair (SE01 in plans)

• Adjustable Height

• With arms

• Black

• Semi executive

5 Each

• Seat Material: fabric

• Back Material: Mesh

• Frame Material: Chrome or PVC

30.

L - Shaped desk (E1, Terrace in plans)

• Surface Area: 1.50x0.75x0.76m (LxWxH)

• Material: 1”Melamine for the top and metal structure

• Color: Light maple melamine and white metal structure

• Work surface must have one (1) cable cord grommets

• One Rolling, 3 – drawer, filing cabinet with stainless steel

31.

Desk (E2 in area Terrace, in plans)

• Surface Area: 150x75x76cm (LxWxH)

• Material: Melamine for the top and metal,1

1/2", square, structure

• Color: Light maple melamine and white metal structure

• Work surface must have one (1) cable cord grommets

• Include a Rolling, 3 – drawer, melamine filing cabinet in white, with stainless steel handles and locks for each desk.

10 Each

32.

Desk (E3 in area: Terrace, in plans)

• Surface Area: 180x75x76cm (LxWxH)

• Material: Melamine for the top and metal,1 1/2", square structure

• Color: Light maple melamine and white metal structure

• Work surface must have one (1) cable cord grommets.

• Include a Rolling, 3 – drawer, melamine filing cabinet in white, with stainless steel handles and locks.

33.

Melamine and Glass Panel Between Desks (P1 in area: Terrace, in plans)

• Measurements: 150x2.5x150cm (LxthicknessxH)

• Dividing panel between desks

• Material: Melamine 1” thick, lower structure with height:

110cm in light maple color On the top structure a10mm thick tempered glass with sandblast paper, and metal supports. height: 40cm

8 Each

34.

Melamine and Glass Panel Between Desks (P2 in area: Terrace, in plans)

• Measurements: 75x2.5x150cm (LxthicknessxH)

• Dividing panel between desks

• Material: Melamine 1” thick, lower structure with height:

110cm in light maple color

• On the top structure a10mm thick tempered glass with sandblast paper, and metal supports. height: 40cm

13 Each

35.

Sideboard (C1 in plans)

• Measurements: 150x60x76cm. (LxWxH)

• Material: Melamine

• Internal Shelving, Sliding Doors, Drawers, stainless steel handles and locks

36.

Black Ergonomic Office Chair (SE02 in plans)

• Adjustable Height

• With arms

• Black

• Semi executive

• Seat Material: fabric

• Back Material: Mesh

• Frame Material: Chrome or PVC

11 Each

37.

Black Office Waiting Guest Chair S3 –

• Seat and back material: Mesh

• Frame Material: metal

4 Each

38.

Heavy duty 4-shelf metal shelf (EM1 in area Terrace, in plans)

• Measurements: 122x45.7x182cm

• Material: steel construction with resin finish

• 4-tier

• 800lb weight capacity per tier

13 Each

39.

Heavy duty 4-shelf metal shelf (EM2 in area Terrace, in plans)

• Measurements: 122x91.4x182cm

• Material: steel construction with resin finish

• 4-tier

• 800lb weight capacity per tier

10 Each

40.

Metal Lockers (L3 in area Terrace,in plans)

• Measurements: 28X 38.5 X 180cm (LxWxH)

• Material: Steel frame construction, and steel sheet 0.6mm thick

• 1 column and 2 rows

• Grey finished in a powder coat

• Corrosion Resistant

• Non-vented design

• Padlock holder

7 Each

41.

Installation of the furniture in Tegucigalpa, Honduras

Please consider installation is on a 3rd and 4th floor, and no elevator is available.

The Contractor shall ensure professional installation to original furniture manufacturer (OEM) standards for all components and accessories. Contractor must ensure all panels, desks, doors, drawers, sideboards are assembled and working properly.

Contractor must do a cleanup and dispose of all packaging and debris.

1 lot

4. WARRANTY

All items shall come with at least a one-year warranty and guarantee of quality.

To facilitate expeditious return of warranty items and to avoid delays in the warranty process, the offeror shall provide within 30 days of notification of a warranty action the required information to facilitate shipping of warranty items to manufacturer.

This includes, but is not limited to, information to ensure full compliance with ITAR regulations and no delay in providing the Reference RA# and a shipping address.

Control Base Stations (Part Number for reference, followed by description and quantity).

5. PREPARATION FOR DELIVERY

Any lost or damaged items during shipment shall be replaced by the contractor upon notification.

Packaging and preservation shall be in accordance with (IAW) best commercial practices to enable shipment to final destination,without repacking or incurring damage during shipment and handling.

The contractor shall ensure that all items are prepared for safe shipment and include all necessary export approvals, required material data safety sheet, licenses, and paperwork. One copy of the packing list and commercial invoice must accompany the shipment, attached to the outside of the “lead” or number one box/carton/package, or individually attached to the outside of each box/carton/package.

All orders are ultimately intended for an overseas destination. If the shipment shall involve wood packaging material, then the packing and palletizing must conform to the standards in the International Standards for Phytosanitary Measures Publication No. 15: “Guidelines for Regulating Wood Packaging Material in International Trade” (ISPM 15) and have the appropriate markings indicating that the materials meet this standard.

6. MARKING AND SUBMISSION OF DOCUMENTS

6.1 All documents shall reference:

Consignee: U.S. Embassy Honduras

INL Office Tegucigalpa, Honduras Col. San Carlos, Contiguo a Embajada Americana Tegucigalpa, Honduras Attention: Ana Carcamo Email: CarcamoAG@state.gov

(504) 9451-0604

7. DELIVERY SCHEDULE

The Laboratory Furniture shall be delivered to the address provided in Section 8, Place of Delivery as soon as possible (ASAP) but not later than (NLT) 45 calendar days from receipt of the award notification.

8. PLACE OF DELIVERY AND INSTALLATION

The Laboratory Furniture shall be delivered to the following address:

Dirección De Medicina Forense Laboratorio de ADN CODIS - 3er Nivel Calle La Salud, Atrás del Hospital Escuela,Col. Quezada Tegucigalpa, Honduras

9. CUSTOMS CLEARANCE AND TAX EXEMPTIONS

If applicable, the U.S. Government will assist the Contractor in obtaining customs clearance and tax exemption certificates from the Government of Honduras. The Contractor’s must include and arrange all local, port handling and other fees associated with delivery to the destination.

The Contractor shall comply with license requirements of the Commerce Control List and any Export Administrative Regulations (EAR), which may apply

9.1. EXPORT LICENSE

mailto:CarcamoAG@state.gov

If an export license is required, delivery shall be forty -five (45) calendar days after receipt of export license, and export license application shall be accomplished expeditiously after award.

10. INSPECTION AND ACCEPTANCE OF THE LABORATORY FURNITURE

The Contractor shall provide to the U.S. Government the new products as described in the specifications. Further, the Contractor shall properly perform the pre-delivery inspection on the products and deliver them to the location set forth under place of delivery, of this Statement of Work.

The final inspection and acceptance of ALL items shall be performed by the U.S.

Government upon their installation at Tegucigalpa, Honduras.

If the items or some item does not fulfill requested technical specifications, INL shall return the items to vendor with no cost to INL Honduras. The vendor shall evaluate and replace returned items with no transportation cost to INL.

INL will have three (3) day to inspect and accept all items after installation has been completed on-site. The designated representative of the US Embassy in Honduras will be responsible for carrying out at least the following checks of the required elements:

i. Quantities

ii. Compliance with the offered technical specifications

iii. Compliance with delivery date

iv. Correct operation of the required elements

The payment(s) to the Contractor shall be made following satisfactory inspection and acceptance of products by the Office of INL in Tegucigalpa, within a thirty (30) day period after submission of the invoice in the payment portal.

12. EVALUATION OF QUOTATIONS:

The following are the evaluation factors for proposals sent by the bidders:

a) DESCRIPTION: Description/nomenclature of the item being quoted;

Compliance with the requested technical specifications as per Statement of Work.

Quote must include images of the proposed items.

b) PRICE: For evaluation purposes, the price will be determined by multiplying the offered prices times the quantities stated in the schedule, and arriving at a grand total, including all options, if any.

• Award will be made to the lowest priced, technically acceptable, responsible quoter.

• The Government reserves the right to reject quotations that are incomplete, non-compliant with the terms of this solicitation, or that are unreasonably high in price.

c) DELIVERY DATE: The Government will evaluate that the proposed delivery time frame complies with section 7, Delivery Schedule.

d) SAM: Unless an exception in FAR 4.1102 applies, a quoter must be registered in SAM (www.sam.gov) to be eligible for award. If the quoter does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer will proceed to award to the next otherwise successful registered quoter. Quote must include the Unique Entity Identifier Number.

e) PAST PERFORMANCE: A list of contracts within the last two (2) years for the provision of comparable Furniture to federal or commercial customers. The list shall include contact information (name, organization, email, and phone) and limited to no more than five (5) references.

ANNEX 1

Layout Plans of 3rd Floor Lab

Layout Plans 4th Floor Terrace- Evidence Storage Room