SOW_DECS250_AEM-2020_MAPLE DD FY25.pdf
PDF 104 KB Posted
- Attached to
- USCGC Maple Thruster parts
- Solicitation number
- 70Z08525Q0029955
About this file
This document is a Scope of Work for the U.S. Coast Guard Cutter Maple DD FY25, seeking to procure specific digital equipment for a Juniper Class Buoy Tender. The required supplies include two DECS250-CN1CN1N Digital Excitation Controllers (125-volt, with ethernet communications), two AEM-2020 Analog Expansion Modules, two 10-foot connection cables, and two DCW100-24/125F0T-U6514 100-watt Converters. These components will integrate with the vessel's Machinery Plant Control and Monitoring System (MPCMS).
The procurement will be awarded on a Lowest Price Technically Acceptable (LPTA) basis through a firm fixed price contract. Delivery is required within 15-16 weeks following award notification, with supplies to be delivered to the USCG Surface Forces Logistics Center in Norfolk, VA. Vendors must be registered in the System Award Management (SAM) database, and invoices shall be submitted via IPP.gov. Technical questions can be directed to Bryan Wright at bryan.g.wright@uscg.mil, with a contact phone number of (757) 628-4009.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| NOTICE OF INTENT TO SOLE SOURCE MAPLE.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SCOPE OF WORK
U. S. COAST GUARD CUTTER MAPLE DD FY25
DECS250 Digital Excitation Controllers & AEM-2020 Analog Expansion Modules
SECTION 1 – GENERAL INFORMATION
1.1 Scope of Work
Provide two DECS250-CN1CN1N Digital Excitation Controllers. Style: CN1CN1N with a 125-volt (VAC/VDC), with internal auto-tracking, compression type terminals, no synchronizer, and 100 Base-T (Modbus Transmission
Control Protocol) ethernet communications to integrate with the United States Coast Guard (USCG) 225B WLB
Juniper Class Buoy Tender’s Machinery Plant Control and Monitoring System (MPCMS). Provide two AEM-2020
Analog Expansion Modules number 942110103 to provide analog outputs 4-20 milliamps to the 225B WLB Juniper
Class Buoy Tender’s Machinery Plant Control and Monitoring System (MPCMS) for wattage, frequency and any other signal in the DECS250-CN1CN1N Digital Excitation Controllers. Provide two 10-foot connection cables for the associated DECS250-CN1CN1N Digital Excitation Controllers and AEM-2020 analog Expansion Modules number 942110103. Provide two DCW100-24/125F0T-U6514 100-watt Converters 24 volts direct current to 125 volts direct current that integrate with the DECS250-CN1CN1N, AEM-2020, and USCG 225B WLB Juniper Class
Buoy Tender’s MPCMS.
1.2 Contact for questions:
1.2.1 Any questions regarding scope of work must be directed to the Contracting Officer. Technical questions can be directed to Mr. Bryan Wright at bryan.g.wright@uscg.mil (757) 628-4009.
1.3 Required Delivery Date and Address
The required supplies shall be delivered to the address below within 15-16 weeks following notice of the award, and tracking info must be supplied within 48 hours of each individual supply being shipped.
USCG SFLC
ATTN: Bryan Wright APM1
300 E Main St. Suite 600
Norfolk, VA 23510
Ph: 757-628-4009
1.4 Award
It is the governments’ intent to make award on the basis of Lowest Price Technically Acceptable (LPTA) offered through issuance of a firm fixed price contract.
1.4.1. Under FAR 4.1103, the prospective contractor shall be registered in System Award Management (SAM) prior to the award. Failure for the contractor to be registered in (SAM) shall result in the Contracting Officer proceeding with the next successfully registered offeror. Website: www.sam.gov
1.5 Invoicing
Invoices shall be submitted via IPP.gov with an attached copy of the invoice included by the vendor that clearly includes the Purchase Order.
mailto:bryan.g.wright@uscg.mil http://www.sam.gov/
File details come from the government source that posted it. Updated .