SOW- Camera Purchase and Installation.pdf

STATEMENT OF WORK

(SOW)

For

CAMERA PURCHASE

Mountain Home AFB (MHAFB), ID

02 Sep 2025

1. GENERAL INFORMATION.

1.1. Scope Of Work. The contractor shall provide all personnel, supervision, equipment, and labor necessary to install and upgrade the identified security camera systems at Mountain Home AFB, ID (MHAFB. All contractor personnel shall obtain and maintain a current certification for all camera systems and components for installation of camera systems. The contractor shall provide documentation of certification to perform work on specified systems prior to award of contract. Contractor tasks will include installation of all new cameras, equipment, and security systems. The contractor shall cover all maintenance of associated equipment (e.g., power supplies), repair of damage caused by power failures or situations not covered under manufacturer’s one year warranty and all minor repairs and modifications associated with camera equipment installation. The quantities of equipment are listed in Appendix A, Workload.

1.2.1. Security Forces Squadron Cameras/Equipment. 2- 480GB SATA Server, 5 – Personal Viewing Stations at the Base Defense Operations Center (BDOC), and Security Forces Armory (3 exterior PTZ cameras). The ECC will be equipped with 1 Client workstation and 1 PTZ camera. The Main Gate (6 cameras), Visitor Control Center (5 cameras), and all cameras at the Grand View Gate Facility (8 cameras).

1.2.2 Force Support Squadron Cameras/Equipment. 1 - 1 Personal viewer at the fitness center and annex (54 cameras).

1.2.3 Logistics Readiness Squadron Cameras/Equipment. 1 – Personal Viewer Station at the Mobility Processing Center (7 cameras). POL will have (1 Personal viewer and 9 cameras)

1.2.4. Explosive Ordnance Disposal Cameras/Equipment. 1 – Personal Viewer Station at the EOD facility (6 cameras).

1.2.5. Command Post Cameras/Equipment. All cameras at the Command Post facility (5 personal viewers and 6 cameras).

1.2.6. 726 ACS. All cameras at the 726th (1 personal viewer and 3 cameras).

1.2.6. 428th Fighter Squadron. The U.S. Civilian Security Managers in the 428 Fighter squadron will have all cameras replaced at the 428th (1 personal viewer and 4 cameras).

1.4. Contract Changes/Additional Work. At future dates, the government reserves the right to incorporate, add, remove, and/or modify quantities of work within the scope of this requirement.

At times, due to the nature of work, it may be necessary to modify this requirement on an as-needed basis. Additionally, there may be a need for ‘one-time’ requirements or special sub-contracting opportunities in order to fulfill the requirement needs. Any future changes to this requirement will be negotiated and incorporated in the contract via contract modification, whether by negotiation, or based on priced line items currently incorporated within the contract.

The Contractor’s technical personnel should be familiar with and capable of installing and maintaining a variety of Internet Protocol (IP) based camera equipment.

1.5. Hours of Operation. The contractor shall be available between Monday through Friday 7:00 am to 4:30 pm (local) time (MST). These are the “normal” hours of operation. Weekends or holidays shall not be counted as a business day.

1.5.1. Holidays. The contractor shall not be required to provide normal services/work during federal holidays. Federal holidays are defined as follows:

New Year’s Day Juneteenth Veteran’s Day Martin Luther King’s Birthday Independence Day (July 4th) Thanksgiving Day President’s Day Labor Day Christmas Day Memorial Day Columbus Day

NOTE: Holidays occurring on Saturday will be observed the preceding Friday. Those occurring on Sunday will be observed the following Monday

2. REQUIREMENTS UNDER WARRANTY. The contractor will provide all required personnel and equipment to ensure compliance with the 1-year warranty.

(a) Telephone Consult. The contractor will provide four-hour telephone calls back in reply to all requests for assistance from the Government. There are no fees charged for telephone consultants; therefore, no work orders will be completed for telephone consultants.

(b) Repair. This is corrective or remedial repairs. The contractor shall respond to all requests for normal repairs within 24 hours or next duty day. The contractor shall complete all normal repairs within 72 hours. Specified time excludes time waiting for the delivery of equipment, materials, and government holidays. Normal corrective actions are to be initiated during normal duty hours (0730-1630), with work continuing during normal duty hours until completed. In instances where corrective services cannot be completed due to part unavailability or unavailability of other needed government support, the service will be completed within 72 hours of receipt of required part(s) or support.

(1) Contractor shall perform test of all repaired system to ensure system is operating properly before repairs are considered completed.

(2) Contractor to provide all tools and diagnostic equipment required for the performance of work. Major equipment such as man lifts and bucket trucks including operators, will be provided by the government.

(c) Warranty Maintenance.

(1) The CSM will provide the contractor with work orders for maintenance requests. All parts ordered for a specific maintenance request will be billed to the appropriate work order. The contractor will ensure the appropriate work order number is used on all documentation (e.g., bills, invoices) pertaining to the work completed or parts ordered.

(2) CSM will provide the contractor with a separate work order for any additional spare parts, as needed. The contractor will ensure the appropriate work order number is used on all documentation (e.g., bills, invoices) pertaining to the parts ordered.

3. SURVEILLANCE & QUALITY ASSURANCE.

3.1. SERVICE SUMMARY. Safety Requirements. Contractors shall be responsible and accountable for the safety and actions of their employees while working within the properties of the site IAW standard OSHA requirements. Contractor personnel must also comply with all base safety requirements. ASM is responsible for ensuring the contractor is aware of local safety requirements.

3.1.1. Contractor Personnel. Management. The contractor shall provide a full-time contract manager who shall be responsible for the performance of the work. The name of this person, and an alternate or alternates, who shall act for the contractor when the manager is absent, shall be designated in writing to the CO no later than the contract start date. The contract manager or alternate shall have full authority to act for the contractor on all contract matters relating to the daily operation of this contract. During normal duty hours the contract manager or alternate shall be available to meet at MHAFB with government personnel designated by the contracting officer to discuss problem areas. The contract manager and alternate must be able to read, write, speak, and understand English. These positions shall at no time be vacant. All personnel shall comply with all installation rules and directives to include but not limited to clearance for base access, motor vehicle operation to include flight line operations, and all safety requirements and guidelines. Attire shall be in good repair and shall not be considered offensive, disruptive, or unsafe. Contractor personnel shall be easily recognizable while on the installation in conjunction with this contract. This shall be accomplished through the wear of distinctive clothing, overcoats, or hats bearing the company name or logo. The coloring or design of the items selected should be such that the items identify personnel easily and quickly for reasons of safety and personal protection. The government is authorized to restrict the employment under the contractor of any contractor employee or prospective contractor employee who is identified as a potential threat to the health, safety, security, general well-being, or operational mission of the installation and its population.

3.1.2. Contingency Operations. During periods of increased security (e.g., increase Force Protection Conditions (FPCONS)) contractor access to the installation may be limited. However, based on the impact of the contract on installation security, all contractors associated with the contract are considered “mission critical,” and the CSM will ensure personnel are allowed access during these periods. However, based on security requirements the contractor may have to be escorted during these periods. The CSM will coordinate base access and escorts with the contract manager during these periods.

3.1.3. The contractor shall notify the government representative of any delays or problems impacting task completion including nature of the delay and expected completion date.

3.1.4 Contractor shall provide employees possessing pertinent certifications and qualified to perform electrical and electronic troubleshooting, repair, testing, diagnostics and proprietary programming of Vindicator based annunciators. Only qualified and licensed personnel with experience maintaining and installing these systems are required. Only certified personnel will perform maintenance on the system. The contractor shall submit personnel qualifications and proof of certification of all individuals that will be performing maintenance with bid.

3.2. Quality Control. The contractor shall employ their commercial quality control program and procedures to identify, prevent, and ensure non-recurrence of defective services. Through implementation of the contractor’s quality control program/procedures, the Government shall receive quality services meeting the requirements of this contract. All quality control records shall be kept and made available to the Government throughout the contract performance period and for the period after contract completion until final settlement of any claims under this contract.

3.3. Quality Assurance. The Government may use various quality assurance methods to determine the contractor’s compliance with the SOW and the contract requirements in accordance with FAR Clause 52.212-4, Contract Terms and Conditions – Commercial Items (a) Inspection/Acceptance.

3.4. Re-Performance of Non-Conforming Work. Upon inspection of work, any work found not to be in accordance with this SOW/contract shall be re-performed by the contractor at no additional cost to the government.

4. CONTRACT ADMINISTRATION. During performance under contract, the contractor shall participate in administrative tasks inherent to the administration, surveillance, and oversight of contract performance.

4.1. Contract Employees. All contract personnel must be able to read, write, speak, and understand English fluently. Contract personnel shall present a neat appearance and be easily identified as a contract employee. The contractor shall obtain base identification, and vehicle passes for all employees who make frequent visits to, or perform work on Mountain Home AFB in accordance with the current installation access/entry requirements. Contractor personnel are required to wear or prominently display installation identification while visiting or performing work on the installation. The contractor shall not employ people for work on this contract identified to the contractor by the CO as a potential threat to the health, safety, security, general well-being, or operational mission of the installation and its population. Each employee will be easily identified by wearing distinctive clothing bearing the name of the company or by wearing appropriate badges that contain the company name and employee name(s). The contractor shall not employ any person who is an employee of the Government, if employing that person would create a conflict of interest. The contractor is cautioned that off-duty active military personnel hired under this contract may be subject to permanent change of station, change in duty hours, or deployment. Military Reservists and National Guard members may be subject to recall to active duty. The abrupt absence of these personnel could adversely affect the service provider’s ability to perform; however, their absence at any time shall not constitute an excuse for non-performance under this contract.

4.2. Interferences. The contractor shall not unduly interfere with regular scheduled government operational activities in the performance of contract requirements. In the event a government supervisor requests, the contractor shall temporarily cease work in the area and report the issue, to include the name of the government personnel involved to Contracting Officer immediately.

The contractor shall notify the Contracting Officer verbally of disputes with customers or other base contractors and follow-up in writing.

4.3. Records Management. The contractor shall create, handle, and maintain records for the Air Force, regardless of medium, in accordance with the requirements established in AFRIMS Records Disposition Schedule (RDS), AFI 33-322, Records Manage Program, AFI 33-364, Records Disposition Procedures and Responsibilities, and AFM 33-363, Management of Records. Full text versions of these publications are available for free download at http://www.e-publishing.af.mil. Inquiries as to the specific actions necessary to meet the requirements established in the above-mentioned publication may be directed to the Mountain Home Records Management Office at 366 CS/SCOKR, Bldg. 512, Mountain Home AFB, ID, 83648.

5.0. ENVIRONMENTAL CONTROLS.

5.1. Hazardous Material Inventory and Safety Data Sheets. SDS are required as specified in the latest version of Federal Standard No. 313 for all potentially hazardous materials. SDSs must be submitted by the Contractor upon contract award to the Hazardous Materials Program Manager (366 FW/A7IE) at 208-828-1684/6351 for a determination of whether or not a product is a HAZMAT and what additional requirements may be applicable/necessary. Approval is required before bringing any hazardous materials (HAZMAT) into the installation. The government (HAZMART personnel) will inventory all chemicals that the Contractor brings to Mountain Home AFB or any property under the control of Mountain Home AFB. Any products that meet the criteria of “Hazardous Waste” must be bar coded and tracked until permanently removed from government property. The inventory will be performed prior to commencement of work. Criteria for identifying hazardous waste is contained in Subpart C of 40 CFR, Part 261.

5.2. Material Storage and Use. The contractor shall follow manufacturer's guidelines and professional recommendations for control of humidity, temperature, cleanliness, and materials handling. This includes hazardous materials.

5.3. Notification of Environmental Spills. If a spill occurs, the person discovering the spill will make every effort to stop the product flow (if possible), warn personnel, shut off ignition sources, contain the spill, make notifications, and begin cleanup. If the spill is considered an emergency and there is a potential life, health, fire, or other safety hazard, the MHAFB Fire Department will be notified IMMEDIATELY. Responsible units/activities will clean up small spills’ safety and within their capabilities to do so. Generally, a spill of only a few gallons will be recovered by the responsible unit/activity using absorbent materials or a spill kit located by the site. Recovered products and contaminated materials will be packaged and staged for disposal in accordance with the installations’ hazardous waste procedures. Contact the

Environmental Office (208-828-6351) for guidance. The liability for the spill or release of such substance’s rests solely with the contractor and its agent.

5.4. Waste. Identify, label, handle, store, and dispose of hazardous waste or debris in accordance with federal, state, and local regulations. Ensure all waste has undergone the appropriate hazardous waste determination and documentation is retained for these determinations. If hazardous waste is generated the contractor will be required to set up and maintain a hazardous waste accumulation point. All hazardous waste generated must be disposed of at an RCRA permitted treatment storage or disposal facility. Do not dispose of hazardous waste on Government property. Do not discharge any waste to a sanitary sewer, storm drain, or to surface waters or conduct waste treatment or disposal on Government property without written approval of the Contracting Officer and Environmental. Consult with the Hazardous Waste Program Manager (366 FW/A7IE) at 208-828-1684/6351 prior to disposal of any waste.

5.5. Historic Preservation. MHAFB houses numerous historic properties (buildings, structures, objects, archaeological sites) managed in compliance with the National Historic Preservation Act (NHPA), and its implementing regulations at 36 CFR 800. To avoid inadvertent adverse effects to historic properties, coordination with 366FW A7IE Cultural Resources Manager, Ms. Noelle Shaver (828-8003/6351) is required prior to implementation.

6. SECURITY, OPSEC, & ANTITERRORISM.

6.1. General. Contractor personnel employed under this contract shall meet the requirements of all security requirements addressed in this SOW. The 366th FW Information Protection (IP) office will provide oversight as the Servicing Security Activity (SSA). Sponsoring Air Force organization will ensure Integrated Visitor Groups complete all necessary security training, i.e.

Information, Physical Security and Anti-Terrorism. The contractor shall ensure requirements for obtaining Contractor personnel security clearances/background checks, protecting Government property, safeguarding protected information/materials, and shielding Government AISs and non-automated information systems are met. The Contractor shall also perform in accordance with the Compliance with National Industrial Security Program Operating Manual (NISPOM).

NOTE: Not all security requirements will apply to every contract. Please refer to contract agreement to determine appropriate requirements.

6.2. Notification of Government Security Activity. Upon performance on the military installation, the contractor will notify the SSA and/or host unit security assistant (USA) 30 days prior to contractor operations. In the event the contract starts within 30 days, the contractor will need to notify the SSA within 72 hours of the contract start. The contractor shall furnish the SSA/host USA at the performance location all required information (identifying information for personnel working the contract, contract information, etc.).

6.2.1. Security Agreement. If deemed a long-term contract the contractor and sub-contractors shall enter into a security agreement with host base SSA, by reviewing and signing the local security procedures documentation. This agreement shall outline how the contractor integrates security requirements for contract operations with the AF to ensure effective and economical operation on the installation.

6.3. Listing of Employees. The contractor shall maintain a listing of all employees performing work under this contract. The list shall be validated and signed by the Contracting Officer Representative (COR), and provided to the Contracting Officer (CO), SSA and host unit supervision. The contractor shall update the list when employees move positions, are replaced, or upon request. The Contract Manager (CM) will also provide visit notification identifying all integrated personnel regardless of clearance level. The list shall include the employees’ Names, Location of Performance, and Security Clearance.

6.3.1. Contractor Removal. The CO may direct the removal of a contractor employee from this contract for reasons of security or misconduct. All contractor personnel are subject to Security Forces jurisdiction and the authority of the installation commander while on USAF installations.

6.4. Contractor Integration. Contractor personnel will be integrated into individual host unit organizations as applicable to their respective functional position. The contractor will adhere to all wing and squadron level security policies and directives. Respective unit security assistants shall provide security administration, to include training and badging.

6.5. Security Support Provided by AF. Security support is provided by the AF to the contractor, including use of base destruction facilities, reproduction facilities, security badges, base visitor control, investigation of security incidents, base traffic regulations, the use of security forms and conducting inspections.

6.6. Off-Installation Security. In the event temporary work is required at locations other than Mountain Home Air Force Base (MHAFB), the contractor will ensure applicable security measures and processes are established with the governing SSA or government agency.

Performance intended to exceed 90 days will require revision of the contract.

6.7. Pass and Identification Items. The Contractor shall ensure the pass and identification items required for contract performance are obtained for employees. Base identification badges will be furnished by the SSA and/or host USA for each contractor employee upon presentation of evidence of assignment. Other required badges will be furnished by the Government as necessary to complete task requirements.

6.7.1 Retrieving Identification Items. The Contractor shall retrieve all identification items from employees who depart for any reason before the contract expires, e.g.

terminated for cause, retirement, etc.

6.8. Security Clearance/Background Check. When applicable all personnel performing on this SOW will have a security clearance/background check equivalent to the requirements listed in the contract. Personnel will complete the appropriate documentation (SF-85, Questionnaire for Non-Sensitive Positions or SF-86, Questionnaire for National Security Positions) through National Background Investigation Services (NBIS) website. Documentation of a completed/adjudicated application is required prior to issuance of a Common Access Card

(CAC).

6.9. Controlled/Restricted Areas. The Contractor shall implement local base procedures for entry to Air Force controlled/restricted areas where contractor personnel will work. When applicable an AF Form 2586, Unescorted Entry Authorization Certificate, must be completed and signed by the sponsoring agencies Security Manager before a Restricted Area Badge will be issued.

6.10. Controlled Unclassified Information. The contractor shall comply with DoDI 5200.48_DAFI16-1403, Controlled Unclassified Information, for identification, protection, and training requirements of CUI. The contractor shall be responsible for training their personnel and accomplishment of the out-processing procedures identified in DoDI 5200.48_DAFI16- 1403. The contractor shall comply with DoDM 5400.07_AFMAN33-302, Freedom of Information Act (FOIA) Program, requirements. Unclassified DoD information not approved for public release on non-DoD Information Systems will be protected IAW DoDI 8582.01, Security of Non-DoD Information Systems Processing Unclassified Nonpublic DoD Information.

6.10.1. Foreign Disclosure. Due to the nature of the MHAFB mission, foreign integration and sensitivity of information and materials, the contractor will ensure all personnel are aware of and comply with foreign disclosure procedures. Release of CUI and Classified Military Information must be approved by the 366 FW Foreign Disclosure Officer (FDO).

6.11. Operations Security (OPSEC). The contractor shall comply with 366 FW OPSEC requirements and countermeasures to protect critical information as defined in AFI 10-701, Operations Security. Contractors shall receive unit specific OPSEC briefing prior to the start of work. Briefing documentation must be completed by the respective unit OPSEC coordinator.

The unit OPSEC personnel will provide guidance on protecting critical information, training materials and other instructions as needed. The contractor will comply with the 366 FW OPSEC Policy that imposes a 100% shred requirement of all government related paper products using NSA approved devices only.

6.12. Antiterrorism (AT). IAW DFARS 252.204-7004, Antiterrorism Awareness Training for Contractors, and DoDI O-2000.16 Volume 1, DoD Antiterrorism Program Implementation:

DoD Antiterrorism Standards, contractor personnel who require routine physical access to MHAFB shall complete Level I AT Awareness Training within 30 days of requiring access and annually thereafter. Routine physical access is defined as any contractor issued a Common Access Card (CAC), any contractor having installation access for a year or more, any contractor requiring a security clearance, or any contractor requiring access to specific secure areas (e.g., SAPF, SCIF, etc.).

6.12.1. Level I AT training shall be completed through a DoD-sponsored/certified computer or web-based distance learning instruction, or under the instruction of a Level I AT Instructor. Contractor personnel can complete DoD Level I AT Training at https://jko.jten.mil/. If the Contractor has personnel who can’t access the DoD Level I AT Training site, they notify the COR to arrange access to the training site or to coordinate other Level I AT Training. Certificates of Completion of initial and annual training will be maintained by the prime contractor and Unit Antiterrorism Representative (UATR) and will be readily available for review as needed.

6.12.2. All personnel, to include contractors, on MHAFB will comply with directed/implemented Force Protection Condition (FPCON) and/or AT measures, unless specifically exempted by the 366 FW Commander (CC). Contractor personnel will submit requests for exceptions to FP/AT Measures through the COR, who will submit the request to 366 FW Antiterrorism Officer (ATO) for a submission to 366 FW/CC.

6.12.3. During periods of increased threat or raised FPCONs, contractor access to the installation, or specific parts of the installation, may be limited or denied. The COR will, when possible, notify contractor personnel before the limitations/restrictions are implemented. Contractor personnel will coordinate with the COR regarding the possible affects limited/restricted access will have on contract completion. Contractor personnel will coordinate with the COR on assignment of Mission Critical Contractor status as needed.

6.12.4. During periods of increased threat or raised FPCONs, personnel, to include contractors, may be required to be escorted while on MHAFB. When being escorted, personnel will always remain with their escort. If personnel become separated from their escort, they will remain where they are and notify the 366 Security Forces Squadron (SFS) at 208-828- 2256/2257/2258.

6.12.5. The Contractor shall include the DFARS 252.204-7004, Antiterrorism Awareness Training for Contractors, clause as well as all other above identified AT items, in all subcontracts, including subcontracts for commercial items, when subcontractor performance requires routine physical access to MHAFB.

6.13. Reporting Requirements. Contractor personnel shall report to an appropriate authority any information or circumstances of which they are aware may pose a threat to the security of DoD personnel, contractor personnel, resources, and classified or unclassified defense information. Contractor employees shall be briefed by their immediate supervisor upon initial on-base assignment.

6.14. Physical Security. The Contractor shall be responsible for safeguarding all government property and controlled forms provided for contractor use. At the end of each work period, all government facilities, equipment, and materials shall be secured.

6.14.1. Key Control/Access Badge Control. The Contractor shall establish and implement methods of making sure all keys/badges issued to the contractor by the Government are not lost or misplaced and are not used by unauthorized persons. The Contractor shall not duplicate any keys issued by the Government.

6.15. Traffic Laws. The Contractor and its employees shall comply with base traffic regulations.

6.16. Weapons, Firearms, and Ammunition. Contractor employees are prohibited from possessing weapons, firearms, or ammunition, either or within their contractor-owned vehicle or privately-owned vehicle while on DOD Installations.

6.17. Domestic Violence/Lautenberg Amendment. Contractor personnel who have duties in, have access to, or are otherwise involved in the storage, issue, disposition of, or transporting firearms or ammunition shall complete DD Form 2760, Qualification to Possess Firearms or Ammunition, annually. DD Forms 2760 shall be maintained by the CM and be made available to the KO and COR office upon request. Any person who has been convicted of a crime of domestic violence is not eligible to perform these duties. All personnel have an affirmative, continuing obligation to inform their supervisors if they have, or later obtain, a qualifying conviction. Candidates selected to fill these positions certify they have not been convicted of a crime of domestic violence, or who is subject to a protective order for domestic violence prior to assuming the duties of the position. These activities are covered by 18 U.S.C. § 922.

Appendix A

Below are the total equipment requirements to be provided by the contractor. The contractor will be responsible for all other accessories required to install the below equipment.

Camera Requirements. Cameras offered by the contractor must be on the approved list that can be found in attachment CMD_ 20240429. The contractor shall provide all camera mounting hardware and mounting plates required.

• Two (2) IP Thermal Cameras

• Twenty- eight (28) Exterior Fixed Cameras

• Fifty- one (51) PTZ Pole Mounted Cameras

• Eighty-one (81) Fixed Wall Mounted Cameras

• Associated Camera licensing for each camera. Licensing shall not be an annual requirement for the government to purchase.

Workstation Requirements. Each workstation is detailed below along with their minimum requirements.

• Sixteen (16) Personal Viewer Workstations Each Workstation will receive one (1) desktop monitor with 22” screen with cabling to hook up to switches.

Each workstation will receive two (2) 16TB hard drive capable of storing camera data 24 hours a day for a minimum of 30 days.

Each Workstation will receive one (1)Economy Client, Small Form Factor computer Each workstation will be equipped with any required software to connect to the cameras.

• Two (2) Client Stations Each Client Station will receive two (2) desktop monitors with 22” screen with cabling to hook up to switches.

Each Client Station will receive One (1) Joystick to navigate screens Each Client Station will receive Dell Tower computer or equivalent Each workstation will receive three (3) 16TB hard drive capable of storing camera data

24 hours a day for a minimum of 30 days.

Each Client Station will be equipped with any required software to connect to the cameras.

• One (1) Administration Workstations Each Client Station will receive two (2) desktop monitors with 22” screen with cabling to hook up to switches.

Each Client Station will receive One (1) Joystick to navigate screens

Each workstation will receive three (3) 16TB hard drive capable of storing camera data 24 hours a day for a minimum of 30 days.

Each Client Station will be equipped with any required software to connect to the cameras.

Other Requirements

• Cyber Sec VMware Cyber Sec VMware shall be installed to cover the entire system.

• Server Racks Two (2) server racks shall be placed in the ECC and BDOC for a total of four (4) racks.

Each rack shall allow for removable or adjustable shelving to allow for the attachment of servers.

• Cabinet

One (1) server cabinet will be installed in the ECC.

• Uninterrupted Power Supply (UPS)

One (1) UPS shall be placed in the ECC and BDOC for a total of two (2) UPS.

One UPS shall be D/Con and the other UPS 192V.

Two (2) UPS rail kits shall also be supplied and used to install.

• Switch One (1) 8-point switch shall be installed at the ECC.