d1-67442d_DRAWING.pdf
PDF 120 KB Posted
- Attached to
- Sources Sought High Volume Battery Line
- Solicitation number
- Not on record
- Issued by
-
Department of the Army
About this file
This is a technical drawing document for an assembly cable manufactured by Tobyhanna Army Depot. The drawing specifies the assembly of a cable with a JST-XH, 6S pack side tap connector, designated as part number D1-67442D Revision 0. The document is controlled by Tobyhanna Army Depot's Design and Development Branch and is classified as CUI//SP-CTI with Distribution Statement C authorization limited to U.S. government agencies and their contractors as of May 6, 2026.
The cable assembly consists of seven wires fabricated from 22 AWG silicone-insulated, 60-strand-count flexible copper wire. Pin 1 must contain red wire and Pin 7 must contain black wire, with Pins 2 through 6 containing unique colors. All wires require a strip back length of 0.09 to 0.19 inches and must be tinned with lead-bearing solder at the stripped ends. The assembly must be constructed using a JST-XHP-7 connector and perform within a temperature range of -40°C to 150°C. The overall assembly dimension is 12.00 inches with a tolerance of +0.5/-0.0 inches. The drawing was preliminarily released on August 11, 2026, and tolerances are to be interpreted per ASME Y14.5-2009 standards on a non-cumulative basis.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| d1-67441d_DRAWING.pdf | ||
| RFI_High Volume Battery Linev2.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
12345678
A
B
C
DD
C
B
A
11 Hap Arnold Boulevard Tobyhanna, PA 18466
TOBYHANNA
ARMY
DEPOT
EXCELLENCE
IN
ELECTRONICS
12345678
CUI
CUI
12.00 +0.5 -0.0
(.09 TO .19)
STRIP BACK LENGTH
7 PLACES
THIS DOCUMENT HAS BEEN PURCHASED BY
THE GOVERNMENT AND MAY BE REPRODUCED
AND USED IN CONNECTION WITH ANY
GOVERNMENT PROCUREMENT OR MAINTENANCE
OPERATION.
D D
R E V
D D
R E V
M O D E L
N A M E
D R A W I N G
N A M E
REVISION HISTORY
SHT - ZONE REV DESCRIPTION DATE APPROVED
0 PRELIMINARY RELEASE 11 AUG 2026 MTM
UNLESS OTHERWISE SPECIFIED
DIM ARE IN INCHES
TOL ANGLE 1
2 PL .03 3 PL .010
INTERPRET DIM AND TOL PER
ASME Y14.5-2009
TOLERANCES SHALL BE NON-CUMULATIVE
DEPARTMENT OF THE UNITED STATES ARMY
TOBYHANNA ARMY DEPOT
TOBYHANNA, PA 18466
DATE
ASSY, CABLE, JST-XH,
6S PACK SIDE TAP
ENGINEER MTM 11 AUG 2026
THIRD ANGLE PROJECTION DRAWN MTM 11 AUG 2026
CHECKED
CUSTOMER DATE SIZE CAGE CODE DWG NO. REV
A1-67380D SUAS APPROVED
D 14850 D1-67442D 0NEXT ASSY USED ON
APPLICATION SCALE 1/1 SHEET 1 of 1
NOTE: ENGINEERING DATA PROVIDED ON THIS DRAWING SHALL BE
SUFFICIENT TO FABRICATE THE ITEM. ALTERNATE METHODS OF
FABRICATION ARE PERMITTED, PROVIDED THAT THE PERFORMANCE
DATA AND DESIGN REQUIREMENTS ARE MET TO SATISFY THE DESIGN
OF THE END-ITEM.
CONTROLLED BY: TOBYHANNA ARMY DEPOT
CONTROLLED BY: DESIGN AND DEVELOPMENT BRANCH
CUI CATEGORY: CUI//SP-CTI
DISTRIBUTION STATEMENT: C
POC: (570) 615-7000
DISTRIBUTION STATEMENT C:
DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES AND THEIR
CONTRACTORS,06 MAY 2026. OTHER REQUESTS FOR
THIS DOCUMENT SHALL BE REFERRED TO TOBYHANNA ARMY DEPOT.
NOTES:
1. SHALL BE MADE WITH JST-XHP-7 CONNECTOR
2. WIRES SHALL BE 22AWG SILICONE INSULATED, 60 STRAND COUNT,
FLEXIBLE, COPPER WIRING.
3. PIN 1 MUST CONTAIN RED WIRE, PIN 7 MUST CONTAIN
BLACK WIRE. PINS 2 THROUGH 6 MUST CONTAIN ALL UNIQUE COLORS.
4. STRIP BACK LENGTH OF ALL WIRES .09" TO .19"
5. STRIPPED END TO BE TINNED WITH LEAD BEARING SOLDER.
6. WIRE MUST PERFORM WITHIN TEMPERATURE RANGE OF -40 °C TO 150°C
PIN 1
RED
PIN 7
BLACK
| Sheet 1 |
| Views |
| new_view_1 |
| left_2 |
| Zones |
| A1 |
File details come from the government source that posted it. Updated .