d1-67441d_DRAWING.pdf
PDF 120 KB Posted
- Attached to
- Sources Sought High Volume Battery Line
- Solicitation number
- Not on record
- Issued by
-
Department of the Army
About this file
This is an engineering drawing for a cable assembly manufactured by Tobyhanna Army Depot. The drawing specifies the fabrication requirements for an XT60 Female Pigtail cable assembly, designated as drawing number D1-67441D, revision 0, with a preliminary release date of August 11, 2026. The assembly consists of two 12 AWG silicone-insulated wires with high strand count (600 to 680 strands) of flexible copper wiring, with the positive wire colored red and negative wire colored black. The cable assembly uses an XT60-F connector with back shell and has a total length of 9.00 inches ±0.25 inches, with wire strip-back length of 0.09 to 0.19 inches at two locations.
The engineering specification requires that the stripped wire ends be tinned with lead-bearing solder and the wires be rated for a temperature range of -40°C to 150°C. The drawing indicates that alternate fabrication methods are permitted provided performance data and design requirements are met. The document is controlled by Tobyhanna Army Depot's Design and Development Branch and is classified as Controlled Unclassified Information (CUI) with category CUI//SP-CTI. Distribution is authorized to U.S. government agencies and their contractors as of May 6, 2026, with other requests to be referred to Tobyhanna Army Depot. The point of contact is listed as (570) 615-7000.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| RFI_High Volume Battery Linev2.pdf | ||
| d1-67442d_DRAWING.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
12345678
A
B
C
DD
C
B
A
11 Hap Arnold Boulevard Tobyhanna, PA 18466
TOBYHANNA
ARMY
DEPOT
EXCELLENCE
IN
ELECTRONICS
12345678
CUI
CUI
9.00 ±0.25
(.09 TO .19)
STRIP BACK LENGTH
2 PLACES
NOTES:
1. SHALE BE MADE WITH XT60-F CONNECTOR, AND BACK SHELL.
2. WIRES SHALE BE 12AWG SILICONE INSULATED, HIGH STRAND COUNT (600
TO 680 STRAND), FLEXIBLE, COPPER WIRING.
3. POSITIVE WIRE MUST BE RED, NEGATIVE WIRE MUST BE BLACK.
4. STRIP BACK LENGHT OF ALL WIRES .09" TO .19"
5. STRIPED END TO BE TINNED WITH LEAD BEARING SOLDER.
6. WIRE MUST BE RATED FOR TEMPERATURE RANGE OF -40 °C TO 150°C
THIS DOCUMENT HAS BEEN PURCHASED BY
THE GOVERNMENT AND MAY BE REPRODUCED
AND USED IN CONNECTION WITH ANY
GOVERNMENT PROCUREMENT OR MAINTENANCE
OPERATION.
D D
R E V
D D
R E V
M O D E L
N A M E
D R A W I N G
N A M E
REVISION HISTORY
SHT - ZONE REV DESCRIPTION DATE APPROVED
0 PRELIMINARY RELEASE 11 AUG 2026 MTM
UNLESS OTHERWISE SPECIFIED
DIM ARE IN INCHES
TOL ANGLE 1
2 PL .03 3 PL .010
INTERPRET DIM AND TOL PER
ASME Y14.5-2009
TOLERANCES SHALL BE NON-CUMULATIVE
DEPARTMENT OF THE UNITED STATES ARMY
TOBYHANNA ARMY DEPOT
TOBYHANNA, PA 18466
DATE
ASSY, CABLE, XT60,
FEMALE PIGTAIL
ENGINEER MTM 11 AUG 2026
THIRD ANGLE PROJECTION DRAWN MTM 11 AUG 2026
CHECKED
CUSTOMER DATE SIZE CAGE CODE DWG NO. REV
A1-67380D A1-67380D APPROVED
D 14850 D1-67441D 0NEXT ASSY USED ON
APPLICATION SCALE 1/1 SHEET 1 of 1
NOTE: ENGINEERING DATA PROVIDED ON THIS DRAWING SHALL BE
SUFFICIENT TO FABRICATE THE ITEM. ALTERNATE METHODS OF
FABRICATION ARE PERMITTED, PROVIDED THAT THE PERFORMANCE
DATA AND DESIGN REQUIREMENTS ARE MET TO SATISFY THE DESIGN
OF THE END-ITEM.
CONTROLLED BY: TOBYHANNA ARMY DEPOT
CONTROLLED BY: DESIGN AND DEVELOPMENT BRANCH
CUI CATEGORY: CUI//SP-CTI
DISTRIBUTION STATEMENT: C
POC: (570) 615-7000
DISTRIBUTION STATEMENT C:
DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES AND THEIR
CONTRACTORS,06 MAY 2026. OTHER REQUESTS FOR
THIS DOCUMENT SHALL BE REFERRED TO TOBYHANNA ARMY DEPOT.
POSITIVE
RED
NEGATIVE
BLACK
BACKSHELL
| Sheet 1 |
| Views |
| new_view_1 |
| left_2 |
| Zones |
| A1 |
File details come from the government source that posted it. Updated .