Sources Sought Notice_693JJ924RQ000390 Final.docx

Action Code: Sources Sought

Classification Code: Code H223- Equipment and Materials Testing- Ground Effect Vehicles, Motor Vehicles, Trailers, and Cycles

Solicitation: 693JJ924RQ000390

Agency/Office: National Highway Traffic Safety Administration (NHTSA)

Location: National Highway Traffic Safety Administration HQ

NAICS Code: 541380, Testing Laboratories, $19 M.

Point of Contract: Vincent Lynch, Contracting Officer, ph (202) 366-9568

Title: Standards Enforcement Program for FMVSS No. 106, "Brake Hoses”

Description(s):

The National Highway Traffic Safety Administration (NHTSA) is issuing this Sources Sought Notice to identify potential qualified Small Business (SB), Small Disadvantaged Business (SDB), 8(a) Certified SDB, HUBZone SB, VOSB, SDVOSB, or WOSB concerns that may be interested in and capable of performing the work described herein to perform Standards Enforcement Program for FMVSS No. 106, "Brake Hoses”

NHTSA welcomes all qualified Small Business concerns, with the appropriate NAICS Code and past experience to submit their Corporate Capability Statements that demonstrate their ability to successfully accomplish the goals of the project as listed below. Special consideration will be afforded to government-wide initiatives calling for less redundancy through Category Management and annual increases to Best-In-Class (BIC) & Spend Under Management (SUM) goals for the Department of Transportation. Therefore, the agency will implement acquisition guidelines to maximize any opportunities for increased efficiencies prior to consideration of soliciting on the open market.

In addition, the government will conduct market research to identify any qualified small businesses; NHTSA does not intend to award a contract on the basis of responses to this notice or otherwise pay for the preparation of any information submitted. Acknowledgement of receipt of responses will not be made; no formal evaluation of the information received will be conducted by NHTSA. NHTSA may; however later on issue a Request for Proposals (RFP). However, should such a requirement fail to materialize, no basis for claims against NHTSA shall arise as a result of a response to this notice.

Background:

The National Highway Traffic Safety Administration (NHTSA) is an operating administration of the United States Department of Transportation (DOT), and its mission is to save lives, prevent injuries, and reduce economic costs associated with motor vehicle crashes. As part of its mission to reduce fatalities and injuries caused by motor vehicle crashes, NHTSA promulgates Federal Motor Vehicle Safety Standards (FMVSS). Manufacturers of motor vehicles and items of motor vehicle equipment are required to certify that each product they sell in the United States meets the requirements of all applicable safety standards. NHTSA’s Office of Vehicle Safety Compliance (OVSC) is charged with determining whether manufacturers meet the applicable safety standards. This contract effort will enable the agency to meet its mission by assuring that motor vehicles meet the requirements of FMVSS No. 106, Brake Hoses.

FMVSS No. 106 establishes minimum performance requirements for brake hose assemblies, fittings, and hose for use in motor vehicles. The purpose of FMVSS No. 106 is to reduce deaths and injuries occurring as a result of brake system failure from pressure or vacuum loss due to hose or hose assembly failure. The requirements for compliance testing of brake hoses include testing such components to the load test requirements of FMVSS No. 106 as specified in TP-106-04.

The purpose of this contract is to acquire services associated with the acquisition, inspection, compliance testing, and compliance test reporting of brake hoses, brake hose assemblies, and brake hose end fittings to assist the Government in its enforcement efforts for FMVSS No. 106.

Objective:

The services under this contract are necessary to assist the Government in its enforcement efforts for Federal Motor Vehicle Safety Standard No. 106, Brake Hoses.

The Contractor shall furnish the necessary qualified technical personnel, facilities, materials, equipment, and services to perform the procurement, receipt, inventory, inspection, testing, reporting, storage and disposal of test items provided to the Contractor as Government Furnished Test Items (GFTI) or purchased by the Contractor as Contractor Purchased Test Items (CPTI).

The Contractor shall provide additional information specific to the tests conducted for NHTSA, including, but not limited to: test data, photos, video, details about the test set up, test observations, or details about the test item configuration, etc.

Capabilities:

The corporate capability statement must address the capabilities necessary to accomplish the scope outlined above as well as the additional tasks and characteristics given below:

Please see Statement of Work.

Format of Corporate Capabilities Statement:

Any interested qualified Small Business firms, Small Disadvantaged Business (SDB), 8(a) Certified SDB, HUBZone SB, VOSB, SDVOSB, or WOSB concerns should submit their Corporate Capability Statement, which demonstrates the firm’s ability and past experience in no more than 10 pages to perform the key requirements described above to the identified NHTSA point of contact listed herein.

Any proprietary information should be marked as such. All respondents are asked to certify the type and size of their business organization is in-line with the requirements of this Sources Sought Notice, and must be received no later than 10 calendar days from the date of publication of this notice.