SOURCES SOUGHT - Corrosion.docx

20 KB Posted

Attached to
Proof of Concept Corrosion Qualification Testing
Solicitation number
AN-001-2023
Issued by

About this file

Written by GovTribe AI ·

This sources sought notice from the Naval Surface Warfare Center, Carderock Division seeks capability statements from potential vendors for proof-of-concept corrosion qualification testing. Interested vendors should have the ability to conduct a 3-month, intermittent flow test of an additively manufactured heat exchanger with separate hot and cold circuits through the exchanger at temperatures of 190 degrees and 70 degrees Fahrenheit, respectively. Capability statements are due by August 25, 2023 and will be used to determine the acquisition strategy for a future solicitation to be posted on SAM.gov. This testing requirement is in support of a Performance Work Statement attached to the notice outlining technical requirements. Respondents should provide company information, point of contact, small business classification if applicable, CAGE code, capability statement, and available test fixtures/platforms in their response.

View the file

Other files

File Type Posted
A02 Minimum Requirements Statement of Work.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

NAVAL SURFACE WARFARE CENTER, CARDEROCK DIVISION

CONTRACTS DEPARTMENT

SOURCES SOUGHT NOTICE

DISCLAIMER: THIS SOURCES SOUGHT NOTICE IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR QUOTE. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS SOURCES SOUGHT NOTICE IS STRICTLY VOLUNTARY.

Closing Date: 25 August 2023 Naval Surface Warfare Center, Carderock Division (NSWCCD) is seeking to identify potential vendors capable of accomplishing the following tasks:

Conduct a proof-of-concept corrosion qualification test on an additively manufactured heat exchanger by accomplishing moderately heated flow loop design and setup to support a 3-month, intermittent flow test with separate hot (190℉) and cold (70℉) circuits that run in parallel through the provided heat exchanger.

Specification/PWS:

A Performance Work Statement (PWS) is attached to this sources sought to assist vendors and manufacturers in understanding the NSWCCD testing requirements mentioned above.

A solicitation date is not currently available. If a solicitation is issued, it will be announced on the Contract Opportunities website at https://sam.gov/content/home at a later date. All interested parties must respond to the solicitation announcement separately from this announcement. It is the responsibility of the potential offeror to monitor this site for additional information pertaining to this requirement. Responses to this sources sought will be used by NSWCCD to influence acquisition decisions which may include: use of sole source or competitive bid procurement process; small business set-aside (small business, large business, or small disadvantaged business), and which acquisition procedures are best suited for this procurement.

If your company/organization has the potential capacity to perform these services, please provide the following information:

1. Company name, address, email address, Web site address, telephone number, and type of ownership for the organization.

2. Point of contact name, telephone number, and email address.

3. Size of business - Large Business, Small Business, Small Disadvantage, 8(a), Hubzone, Woman-owned and/or Veteran-owned. If significant subcontracting or teaming is anticipated in order to deliver technical capability, organization should address the administrative and management structure of such arrangements.

4. Contractor and Government Entity (CAGE) Code.

5. Company capability statement

6. List of test fixtures types/platforms available at the laboratory.

7. Expected test availability for Q1 FY24.

NOTE: Only information provided in the written Capability Statement shall be considered.

Capability Statements shall be submitted via e-mail to: arnel.a.ngo.civ@us.navy.mil by 12:00 p.m. Eastern Daylight Time on 25 August 2023.

Attachment 1: Performance Work Statement (PWS).

2 | 2

File details come from the government source that posted it. Updated .