SOO.pdf

1. SOO/TRP for COTS Products Purchases To: AFTC/PZIOA, Eglin AFB, FL For: USAF/53w/28 TES Combat Readiness Gasmet Calcmet Software

2. Purpose The purpose of this purchase is to obtain the Calcmet Pro software. The specified software is fully compatible with and will seamlessly integrate with the existing instrumentation infrastructure to support test efforts at the 28th TES Combat Readiness well into the future. To maintain development and configuration fidelity we require Calcmet Pro Software. The exact software is required because it is fully compatible with existing test hardware and instruments.

Calcmet Pro software is necessary to expand the gas component identification of current instruments to allow for expanding the functionality of detection across tests.

BELOW, IDENTIFY YOUR SPECIFIC APPLICABLE REGULATORY REQUIREMENTS

3. Technical Requirements The contractor shall ensure that all applicable Commercial-Off-The-Shelf (COTS) IA and IA-enabled products comply with AFI 33-200, Information Assurance. Some of these products must be Committee on National Security Systems Policy 11 (CNSSP-11) compliant, requiring them to be validated by accredited labs under the National Information Assurance Partnership (NIAP) Common Criteria Evaluation and Validation Scheme or National Institute of Standards and Technology (NIST) Federal Information Processing Standards (FIPS) Cryptographic Module Validation Program (CMVP) as identified in the sections below.

4. Ordering Table

INSERT YOUR TABLE OF REQUIRED EQUIPMENT HERE

Part Number Description Product Code Qty 26100567 Calcmet Expert HASP key-Permits operation of Calcmet Expert and GT5000 Serial number specific with a laptop

GAS-SW-500 1

26100568 Calcmet Expert HASP spare key for GAS-SW-

GAS-SW-501 1

5. Technical Contractual Requirements

5.1 Technical Refresh

In order to ensure new design enhancements and technological updates or advances, the contractor shall offer, under this DO, hardware and software components available to the contractor's commercial customers. Furthermore, the contractor shall make available any commercially available updates to the hardware and software provided under this DO. If such updates are available to other customers without charge, then they shall also be made available to the Government without additional charge. The contractor will ship these updates to existing customers who have acquired the hardware/software being updated under this DO. Vendor commercial product offerings shall include “state of the art” technology, i.e., the most current proven level of development available in each product category.

5.2 Trade Agreement Act (TAA)

All proposed products must be compliant with the Trade Agreements Act of 1979 (TAA) and related clauses in Section I of this contract. In accordance with DFARS 252.225-7021, the Trade Agreements Certificate at DFARS 252.225-7020 shall be provided for each end item defined and specified in a solicitation that exceeds the TAA threshold subject to the waivers and exceptions provided in FAR 25.4, and DFARS 225.4 offered in response to any RFQ issued under this contract. Please note that Federal Acquisition Regulation (FAR) paragraph 25.103(e) includes an exemption from the Buy American Act (BAA) for acquisition of information technology that is commercial items.

5.3 Authorized Resellers

The contractor may be an authorized reseller of new and refurbished/remanufactured equipment for OEMs proposed under this DO. The contractor may also procure directly from the OEM or utilize other legitimate distribution channels to provide the required products in accordance with the OEM’s policies on reselling. Any contractor’s channel relationships with their OEM partners (gold, silver, etc.) will be represented in the best pricing offered. If the contractor is not an OEM reseller, the contractor shall clearly identify this on the submitted proposal and list the OEM resell partner’s registered relationship with the OEM. DOs may restrict the use of authorized resellers, specific OEMs, or identify required OEMs. The contractor shall ensure all products are genuine and eligible for any OEM warranties, maintenance agreements and licensing as offered. Genuine products are those products the OEM, by their policy, considers not “secondary”, destroyed, stolen or scrapped.

5.4 Remanufactured/Refurbished Products

Any product offering that is remanufactured or refurbished shall be clearly identified as such by the contractor on the submitted proposal. Remanufactured products shall have the OEM or factory certification, if available, for that product. Remanufactured and refurbished products shall be certified according to the standards set forth in the policy of the OEM.

5.5 Items on Backorder

In their response to a Request for Quote (RFQ), the contractor shall provide notification, if applicable, that a particular item is on backorder, the expected lead-time to fulfill the order, etc.

It shall be implicit that a response to an RFQ with no items identified on backorder is a declaration that the items are available at the time of quote submission.

5.6 Warranty

The contractor shall provide any OEM pass through warranty and standard commercial warranties applicable to the products being purchased at no cost. This shall apply to new, refurbished and remanufactured equipment.

6. Delivery Requirements 60 Days ARO

6.1 Shipping Information

All products shall be shipped to:

DODACC: F1T0EG

Delivery address: 806 N 2nd Street, Bldg 430, Eglin AFB, FL 32542

Inspection/Acceptance: The following Government officials are responsible for receiving the products and performing inspection: