Solicitation - W91QEX25QA018.pdf

WOMEN-OWNED SMALL

BUSINESS (WOSB)

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES

1. REQUISITION NUMBER PAGE 1 OF

2. CONTRACT NUMBER 3. AWARD/EFFECTIVE

DATE

4. ORDER NUMBER 5. SOLICITATION NUMBER 6. SOLICITATION ISSUE

DATE

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME b. TELEPHONE NUMBER (No collect 8. OFFER DUE DATE/

LOCAL TIME

9. ISSUED BY

13b. RATING

14. METHOD OF SOLICITATION

CODE

15. DELIVER TO 16. ADMINISTERED BY CODE

18a. PAYMENT WILL BE MADE BY CODE17a. CONTRACTOR/

OFFEROR

CODE

FACILITY

CODE

CODE

TELEPHONE NUMBER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED

REQUEST

FOR QUOTE

(RFQ)

INVITATION

FOR BID

(IFB)

REQUEST

FOR

PROPOSAL

(RFP)

SEE ADDENDUM

19.

ITEM NUMBER

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Government Use Only)

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH

AND DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND

ON ANY ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS

SPECIFIED

29. AWARD OF CONTRACT: REFERENCE OFFER

DATED . . YOUR OFFER ON SOLICITATION

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR

30b. NAME AND TITLE OF SIGNER (Type or print) 30c. DATE SIGNED

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

31b. NAME OF CONTRACTING OFFICER (Type or print) 31c. DATE SIGNED

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 11/2021)

Prescribed by GSA - FAR (48 CFR) 53.212

10. THIS ACQUISITION IS UNRESTRICTED OR

NORTH AMERICAN

INDUSTRY CLASSIFICATION

STANDARD (NAICS):

SIZE STANDARD:

13a. THIS CONTRACT IS A

RATED ORDER UNDER

THE DEFENSE PRIORITIES

AND ALLOCATIONS

SYSTEM - DPAS (15 CFR 700)

SET ASIDE: % FOR:

11. DELIVERY FOR FREE ON

BOARD (FOB) DESTINATION

UNLESS BLOCK IS MARKED

SEE SCHEDULE

12. DISCOUNT TERMS

ARE ARE NOT ATTACHED

ARE ARE NOT ATTACHED

27a. SOLICITATION INCORPORATES BY REFERENCE (FEDERAL ACQUISITION REGULATION) FAR 52.212-1, 52.212-4. FAR 52.212-3

AND 52.212-5 ARE ATTACHED. ADDENDA

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

8(A)

ECONOMICALLY

DISADVANTAGED

WOMEN-OWNED SMALL

BUSINESS (EDWOSB)

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

(SDVOSB)

HUBZONE SMALL

BUSINESS

SMALL BUSINESS

NOTE: OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30.

calls)

Created On:

04 Sep 2025, 12:46 PM Central Daylight Time

Solicitation/Contract Form Continuation

DES Furniture Purchase & Workstations Reinstall

W91QEX25QA018

Continuation of Supplies or Services and Prices/Costs

Additional Information/Notes

Item Supplies/Service Quantity Unit Unit Price Amount

The Contractor shall purchase STEELCASE Office Furniture/Workstations, including installation, for the Directorate of Emergency Service (DES) in accordance with the Statement of Work (SOW).

Pricing Arrangement: Firm Fixed Price

1 Each

Additional Descriptive Data:

Additional Information: Item text: DES FURNITURE PURCHASE SOLE SOURCE CONTRACT USAG-MIAMI COR POC is Mr.

Jose Diaz, PH:305-437-2190; jose.diaz8.civ@mail.mil USAG-MIAMI RM is Robert Paisley, PH 305-437-2660; email:robert.j.paisely.

civ@mail.mil

Continuation of Description

PRODUCT DESCRIPTION

Line

Quantity

Catalog Number / Description

BEG Subsection OFFICE 1022A

Tag For

2542-1 STEELCASE

Kathryn; Chair-Guest, Wood, Upholstered panel back UPHOLS :5S27 MALT

WDFRAME :3422 FC/OP MEDIUM CHERRY OPTIONS * *

OPTIONS * *

WELT OPT *OPT:WELT OPTION

NON CONT STD:NON CONTRASTING

FAB BACK *OPT:ACRYLIC LATEX BACKING NOBACKER

FABRIC BACKER NOT

REQUIRED

OFFICE 1022A KATHRYN

2 4821410 STEELCASE

Amia;Chair,Uph PLASTIC :6205 BLACK

UPHLSTRY:5B70 MIDNIGHT OPTIONS * * OPTIONS * *

ARMS *OPT:ARM OPTIONS H/W/P/D STD:H

/W/P/D ARMS

SEAT HGT *OPT:BASE ASSY HEIGHT RANGE 5" RANGE

STD:5" PNEU SEAT HEIGHT

RANGE

BASE OPT *OPT:BASE OPTION PLASTIC STD:PLASTIC BASE CASTERS

CASTERS

Line Quantity Catalog Number / Description

HARD CST STD:HARD CASTERS

PACKAGE *OPT:PACKAGING OPTIONS

NA Not Applicable

AMIA

3 AWAC23212 STEELCASE

Drawer-Center, 23D x 21 1/4W x 2 1/4H

BASIC: 3422 FC/OP MEDIUM CHERRY

OFFICE 1022A

CD/23

4 E6KV243072B STEELCASE

Cabinet-Vertical, Plinth base, 2 doors over 2 drawers, 24D x 30W x 72 1/2H

BASIC: 3422 FC/OP MEDIUM CHERRY

FRONT:3422 FC/OP MEDIUM CHERRY

LOCK:9201 POLISHED CHROME

KEYS :SK PLUG

OPTIONS * * OPTIONS * *

DOOR OPT *OPT:DOOR OPTION

NO GLS NO GLS DOOR

PULL OPT *OPT:PULL OPTION

PULL WD PULLS FOR WOOD FRONT

BAR PULL BAR PULL

PULL PULL

PLTMETAL *PULL:PLATED METAL

9212 SILVER

SHELF OPT *OPT:SHELF OPTION

3/4 SHLF STD:3/4 INCH SHELF

DWR CON *OPT:DRAWER CONSTRUCTION

DOVETAIL STD:DOVETAIL CONSTRUCTION

FFRNTOPT *OPT:FRONT OPTIONS

TOE KICK TOE KICK

OFFICE SET *OPT:OFFICE SET

NONE STD:NO OFFICE SET

OFFICE 1022A

VC/72

5 E6MST157243C STEELCASE

Service module-Single high, all closed, 15 3/4D x 72W x 43 1/2H

BASIC:3422 FC/OP MEDIUM CHERRY

OPTIONS * * OPTIONS * *

DOOR OPT *OPT: DOOR OPTION WD DOOR WOOD

DOOR DOOR DOOR

WOOD *DOOR: WOOD

3422 FC/OP MEDIUM CHERRY

OPN CLS *OPT:OPEN AND CLOSE OPTION SOFT CLS

SOFT CLOSE

LOCK OPT *OPT:LOCK OPTION LOCKOPT

LOCKING

KEY OPT KEYING OPTIONS

SK PLUG STANDARD KEY PLUG LOCKING

LOCKING FINISH

(REQUIRED)

LOCK LOCK

POL CHR *LOCK:POLISHED CHROME

9201 POLISHED CHROME OFFICE SET *OPT:OFFICE SET

NONE STD:NO OFFICE SET

OFFICE 1022A SM/72

6 E6PD233627F STEELCASE

Pedestal, Plinth base, File / file, 23 1/4D x 36W x 27 1/2H

BASIC :3422 FC/OP MEDIUM CHERRY FRONT :3422 FC/OP MEDIUM

CHERRY LOCK :9201 POLISHED CHROME KEYS :SK PLUG

OPTIONS * * OPTIONS * * PULL OPT *OPT:PULL

OPTION

PULL WD PULLS FOR WD FRT BAR PULL BAR

PULL

PULL PULL

PLTMETAL *PULL:PLATED METAL 9212 SILVER

DWR CON *OPT:DRAWER CONSTRUCTION DOVETAIL

STD:DOVETAIL CONSTRUCTION WGHT PKG

*OPT:COUNTERWEIGHT PKG NO WGHT

NO COUNTERWT PKG FFRNTOPT *OPT:

FRONT OPTIONS

TOE KICK TOE KICK

OFFICE SET *OPT:OFFICE SET

NONE STD:NO OFFICE SET

OFFICE 1022A

FF/2/23

7 E6PD291527B STEELCASE

Pedestal, Plinth base, Box / box / file, 29 1/4D x 15W x 27 1/2H

BASIC :3422 FC/OP MEDIUM CHERRY

FRONT :3422 FC/OP MEDIUM CHERRY

LOCK :9201 POLISHED CHROME

KEYS :SK PLUG

OPTIONS * * OPTIONS * *

PULL OPT *OPT: PULL OPTION

PULL WD PULLS FOR WD FRT

BAR PULL BAR PULL

PULL PULL

PLTMETAL *PULL: PLATED METAL

9212 SILVER

DWR OPT *OPT:DRAWER OPTION

STD CLS STD:STANDARD CLOSE

DWR CON *OPT:DRAWER CONSTRUCTION

DOVETAIL STD:DOVETAIL CONSTRUCTION

WGHT PKG *OPT:COUNTERWEIGHT PKG

NO WGHT NO COUNTERWT PKG

FFRNTOPT *OPT:FRONT OPTIONS

TOE KICK TOE KICK

OFFICE SET *OPT:OFFICE SET

NONE STD:NO OFFICE SET

OFFICE 1022A

BBF/2/29

8 EEAWST STEELCASE

Tackboards

Width: 70.37500

Height: 21.56250

Tackboard Finish: Boccie P201 - NEW ALMOND

Scallop: No Scallop

Application: Service Mod

OFFICE 1022A

TB/70.3750/21.5625

9 EEWBW STEELCASE

Bridge Veneer Worksurface Depth: 24.00000

Width: 48.00000

Top Surface Finish: Flat Cut/Open Pore 3422 - FC/OP MEDIUM CHERRY

Grain Direction: Long Grain Scallop: No Scallop

Edge Profile: 3MM Wood Edge Grommet: Round Grommet

Round Grommet Finish: Smooth Paint PG2 0835 - BLACK

Grommet Location: Center

Office Set: NONE

OFFICE 1022A 24/48

10 EEWDW STEELCASE

Desk Veneer Worksurface Front: Straight

Depth: 30.00000

Width: 72.00000

Top Surface Finish: Flat Cut/Open Pore 3422 - FC/OP MEDIUM CHERRY

Grain Direction: Long Grain Edge Profile: 3MM Wood Edge Grommet: Round Grommet

Round Grommet Finish: Smooth Paint PG2 0835 - BLACK

Grommet Location: Right Grommet Depth: Rear

Office Set: NONE

OFFICE 1022A 30/72

11 EEWSEPMPW STEELCASE

Plinth Base Veneer End Panel for Use with Modesty Panels

Handedness: Left Hand Depth: 24.00000

Height: 27.55910 Filler - Front: No Filler

Panel Finish: Flat Cut/Open Pore 3422 - FC/OP MEDIUM CHERRY

Grain Direction: Vertical Office Set: NONE

OFFICE 1022A EP/24

12 EEWSEPMPW STEELCASE

Handedness: Right Hand Depth: 30.00000

Height: 27.55910 Filler - Front: No Filler

Panel Finish: Flat Cut/Open Pore 3422 - FC/OP MEDIUM CHERRY

Grain Direction: Vertical

Office Set: NONE

OFFICE 1022A EP/30

13 EEWSMBPW STEELCASE

Plinth Base Veneer Modesty Panel for Use with Bridges

Width: 72.00000

Width - Panel: 78.00000 Height: 27.55910

Panel Finish: Flat Cut/Open Pore 3422 - FC/OP MEDIUM CHERRY

Grain Direction: Vertical Scallop: No Scallop

Office Set: NONE

OFFICE 1022A MPF/72

14 EEWSMFPW STEELCASE

Full-Height Plinth Base Veneer Modesty Panel for Use with Storage and End Panels

Width: 72.00000

Height: 27.55910

Panel Finish: Flat Cut/Open Pore 3422 - FC/OP MEDIUM CHERRY

Scallop: No Scallop Grain Direction: Vertical Office Set: NONE

OFFICE 1022A MPF/72

15 EEWSW STEELCASE

Straight Veneer Worksurface Depth: 24.00000

Width: 72.00000

Top Surface Finish: Flat Cut/Open Pore 3422 - FC/OP MEDIUM CHERRY

Grain Direction: Long Grain Scallop: No Scallop

Edge Profile: 3MM Wood Edge Grommet: Round Grommet

Round Grommet Finish: Smooth Paint PG2 0835 - BLACK

Grommet Location: Left

Office Set: NONE

OFFICE 1022A 24/72

END Subsection

BEG Subsection OFFICE 1022B

16 2

2542-1 STEELCASE

Kathryn; Chair-Guest, Wood, Upholstered panel back UPHOLS :5S27 MALT

WDFRAME :3422 FC/OP MEDIUM CHERRY OPTIONS * *

OPTIONS * *

WELT OPT *OPT:WELT OPTION

NON CONT STD:NON CONTRASTING

FAB BACK *OPT:ACRYLIC LATEX BACKING NOBACKER

FABRIC BACKER NOT

REQUIRED

OFFICE 1022B KATHRYN

17 4821410 STEELCASE

Amia;Chair,Uph PLASTIC :6205 BLACK

UPHLSTRY:5B70 MIDNIGHT OPTIONS * * OPTIONS * *

ARMS *OPT:ARM OPTIONS H/W/P/D STD:H

/W/P/D ARMS

SEAT HGT *OPT:BASE ASSY HEIGHT RANGE 5" RANGE

STD:5" PNEU SEAT HEIGHT

RANGE

BASE OPT *OPT:BASE OPTION PLASTIC STD:PLASTIC BASE CASTERS

CASTERS

HARD CST STD:HARD CASTERS PACKAGE *OPT:PACKAGING

OPTIONS

NA Not Applicable

AMIA

18 AWAC23212 STEELCASE

Drawer-Center, 23D x 21 1/4W x 2 1/4H BASIC :3422 FC/OP MEDIUM

CHERRY

OFFICE 1022B CD/23

19 E6KV243072B STEELCASE

Cabinet-Vertical, Plinth base, 2 doors over 2 drawers, 24D x 30W x 72 1/2H

BASIC :3422 FC/OP MEDIUM CHERRY FRONT :3422 FC/OP MEDIUM

CHERRY LOCK :9201 POLISHED CHROME KEYS :SK PLUG

OPTIONS * * OPTIONS * *

DOOR OPT *OPT:DOOR OPTION NO GLS NO GLS DOOR

PULL OPT *OPT:PULL OPTION

PULL WD PULLS FOR WOOD FRONT BAR PULL

BAR PULL

PULL PULL

PLTMETAL *PULL:PLATED METAL 9212 SILVER

SHELF OPT *OPT:SHELF OPTION 3/4 SHLF STD:3/4 INCH

SHELF

DWR CON *OPT:DRAWER CONSTRUCTION

DOVETAIL STD:DOVETAIL CONSTRUCTION FFRNTOPT

*OPT:FRONT OPTIONS

TOE KICK TOE KICK

OFFICE SET *OPT:OFFICE SET NONE STD:NO OFFICE SET

OFFICE 1022B VC/72

20 E6MST157843C STEELCASE

Service module-Single high, All closed, 15 3/4D x 78W x 43 1/2H

BASIC :3422 FC/OP MEDIUM CHERRY OPTIONS * * OPTIONS * *

DOOR OPT *OPT:DOOR OPTION WD DOOR WOOD

DOOR DOOR DOOR

WOOD *DOOR: WOOD

3422 FC/OP MEDIUM CHERRY

OPN CLS *OPT:OPEN AND CLOSE OPTION SOFT CLS

SOFT CLOSE

LOCK OPT *OPT:LOCK OPTION LOCKOPT

LOCKING

KEY OPT KEYING OPTIONS

SK PLUG STANDARD KEY PLUG LOCKING

LOCKING FINISH

(REQUIRED)

LOCK LOCK

POL CHR *LOCK: POLISHED CHROME

9201 POLISHED CHROME OFFICE SET *OPT: OFFICE SET

NONE STD:NO OFFICE SET

OFFICE 1022B SM/78

21 E6PD231527F STEELCASE

Pedestal, Plinth base, File / file, 23 1/4D x 15W x 27 1/2H

CHERRY LOCK :9201 POLISHED CHROME KEYS :SK RAND

OPTIONS * * OPTIONS * *

PULL OPT *OPT:PULL OPTION PULL WD PULLS

FOR WD FRT BAR PULL BAR PULL

PULL PULL

PLTMETAL *PULL:PLATED METAL 9212 SILVER

DWR OPT *OPT:DRAWER OPTION STD CLS STD:STANDARD

CLOSE

DWR CON *OPT:DRAWER CONSTRUCTION DOVETAIL

STD:DOVETAIL CONSTRUCTION WGHT PKG

*OPT:COUNTERWEIGHT PKG NO WGHT

NO COUNTERWT PKG FFRNTOPT *OPT:

FRONT OPTIONS

TOE KICK TOE KICK

OFFICE SET *OPT:OFFICE SET NONE STD:NO OFFICE SET

OFFICE 1022B FF/2/23

22 E6PD291527B STEELCASE

Pedestal, Plinth base, Box / box / file, 29 1/4D x 15W x 27 1/2H

CHERRY LOCK :9201 POLISHED CHROME KEYS :SK PLUG

OPTIONS * * OPTIONS * * PULL OPT *OPT:PULL

OPTION

PULL WD PULLS FOR WD FRT BAR PULL BAR

PULL

PULL PULL

PLTMETAL *PULL:PLATED METAL 9212 SILVER

DWR OPT *OPT:DRAWER OPTION STD CLS STD:STANDARD

CLOSE

DWR CON *OPT:DRAWER CONSTRUCTION DOVETAIL

STD:DOVETAIL CONSTRUCTION WGHT PKG

*OPT:COUNTERWEIGHT PKG NO WGHT

NO COUNTERWT PKG FFRNTOPT *OPT:

FRONT OPTIONS

TOE KICK TOE KICK

OFFICE SET *OPT:OFFICE SET NONE STD:NO OFFICE SET

OFFICE 1022B BBF/2/29

23 EEAWST STEELCASE

Tackboards Width: 76.37500

Height: 21.56250

Tackboard Finish: Boccie P201 - NEW ALMOND Scallop: No Scallop

Application: Service Mod

OFFICE 1022B TB/76.3750/21.5625

24 EEWDW STEELCASE

Desk Veneer Worksurface Front: Straight

Depth: 30.00000

Width: 72.00000

Top Surface Finish: Flat Cut/Open Pore 3422 - FC/OP MEDIUM CHERRY

Grain Direction: Long Grain Edge Profile: 3MM Wood Edge Grommet: Round Grommet

Round Grommet Finish: Smooth Paint PG2 0835 - BLACK

Grommet Location: Left Grommet Depth: Rear

Office Set: NONE

OFFICE 1022B 30/72

25 EEWRW STEELCASE

Return Veneer Worksurface Handedness: Left Hand Depth: 24.00000

Width: 48.00000

Top Surface Finish: Flat Cut/Open Pore 3422 - FC/OP MEDIUM CHERRY

Grain Direction: Long Grain Scallop: No Scallop

Edge Profile: 3MM Wood Edge Grommet: Round Grommet

Round Grommet Finish: Smooth Paint PG2 0835 -

BLACK

Grommet Location: Center Office Set: NONE

OFFICE 1022B 24/48

26 EEWSEPMPW STEELCASE

Handedness: Left Hand Depth: 30.00000

Height: 27.55910 Filler - Front: No Filler

Panel Finish: Flat Cut/Open Pore 3422 - FC/OP MEDIUM CHERRY

Grain Direction: Vertical

Office Set: NONE

OFFICE 1022B EP/30

27 EEWSMFPW STEELCASE

Full-Height Plinth Base Veneer Modesty Panel for Use with Storage and End Panels

Width: 72.00000

Height: 27.55910

Panel Finish: Flat Cut/Open Pore 3422 - FC/OP MEDIUM CHERRY

Scallop: No Scallop Grain Direction: Vertical

Office Set: NONE

OFFICE 1022B MPF/72

line Quantity S Catalog Number / Description

GSADESIGN

STEELCASE

29 39 GSA INSTALL STEELCASE

Installation Charges

30 72 GSARECONFIG STEELCASE

LABOR TO BREAK DOWN AND RLEOCATE 6 WORKSTATIONS TO THE

TRAILERS FOR CONSTRUCTION.

31 32 GSARECONFIG STEELCASE

LABOR TO PULL 2 WORKSTATIONS FROM TRAILERS, RELOCATE AND

INSTALL WHEN CONSTRUCTION IS COMPLETE.

Requirements DES Office Furniture

Product Service Code: 7110

Continuation of Inspection and Acceptance

Overall Contract Inspection/Acceptance Locations

Inspection and Acceptance Location

Both Destination Instructions: Refer to the Statement of Work for Inspection/Acceptance criteria

DoDAAC: W58CGZ CountryCode: USA

W1EW USAG MIAMI

9301 NW 33RD ST, DORAL FL 33172-0000

DORAL, FL 33172-0000

UNITED STATES

Andres Garcia Email: andres.garcia56.civ@mail.mil Telephone: (305) 437-2125

Continuation of Deliveries or Performance

STATEMENT OF WORK

FOR

USAG-MIAMI, DIRECTORATE OF EMERGENCY SERVICES

DES FURNITURE PURCHASE & WORKSTATION INSTALL

(Open-source Division Area cubicle modification)

1.0 GENERAL: The purpose of this statement of work details the modification of 6 existing office cubicles for the DES, located in the USAG-Miami Building, Area Suite A1004 within the Open-Source Division. The Contractor shall procure and install modifications to the cubicles; it requires the breakdown and relocate of Six cubicles workstations to the storage trailers for construction. Then pull 2 cubicle workstations from the trailer and relocate and install when construction is complete.

1.1 DESCRIPTON OF SERVICE: The DES requires the breakdown and relocation of Six cubicles workstations to the storage trailers for construction. Then pull Two cubicle workstations from the trailer and relocate and install when construction is complete. The vendor for these efforts is BRAND NAME - PERDUE Inc. The Contractor shall customize this requirement in accordance with the product description and/or agreed upon specifications for the mentioned location.

1.2 LOCATION: The cubicle workstations to be modified are located on the 1st floor of the USAG-Miami Building, Suite A1004 within the Open-Source Division.

2.0 MANUFACTURER, DESIGNER, AND INSTALLATION REPRESENTATIVE. The contractor shall provide a representative to act as a liaison with the Government Representative (GR). The contract representative shall be of sufficient authority to resolve issues as they arise and shall be available during the period of contract performance.

2.1 SERVICE BREAKDOWNS. The contractor shall ensure that any maintenance or repairs shall be corrected immediately at the contractor's expense, without further cost to the Government.

2.2 U.S. FEDERAL CONTRACTOR REGISTRATION: All entities that do contractual business with the U.

S. Department of Defense must be registered thru System for Award Management (SAM). If you have not registered, go to SAM.gov to register. Only businesses that have registered in SAM will be considered for contracts award. If you have difficulty registering in SAM, please contact the Contracting team for assistance.

3.0 DESCRIPTION OF SUPPLIES AND SERVICES: (DES) requires the breakdown and relocation of six cubicle workstations to the storage trailers for construction. Once constructed, two cubicle workstations are pulled relocated from the trailer and installed in accordance with the Statement of Work. Once DES Office rooms 1022A & 1022B are constructed and reconfigured, DES needs to purchase furniture for two office spaces. Reference product description.

4.0 WARRANTY AND QUALITY STANDARDS REQUIREMENTS. The provider must guarantee its work to be free of defect in workmanship and material for a period of (3) years after work is delivered to client.

Damage due to ordinary wear and tears, and/or exceptional circumstances, must be excepted. Care instructions for the furniture will be provided at time of delivery. Preliminary sizing - all final specifications for customized furniture pending shop drawing approvals.

5.0 INSTALLATION/DELIVERY. Installation must be performed by trained installers and equipped with full assembly instructions to deliver on or before the delivery date. The installation and delivery dates are subject to change to accommodate the Government.

6.0 TESTING OF ANY EQUIPMENT. The contractor shall be ready to conduct any necessary testing of all installed/delivered furniture. This shall be coordinated with the US Government representative.

7.0 APPLICABILITY. US SOUTHCOM is a federal institution, Tax exemption, if any, applies.

8.0 GOVERNMENT REPRESENTATIVE. A Government Representative (GR) will coordinate administrative, logistical, and miscellaneous issues with the contractor. This representative shall not make any changes to the terms, conditions, standards, or cost of the contract. This individual has the authority to provide technical directions to the contractor if the direction is within the scope of the contract, does not constitute a change, and has no funding implications.

8.1 CHANGES TO CONTRACT. The only person authorized to make changes to the contract is the Contracting Officer (not the Government Representative). Failure to clear changes in contract with the Contracting Officer shall result in the contractor not receiving compensation for costs incurred. Accordingly, the Contracting Officer shall be notified prior to any additional services performances, and a contract modification should be issue to the contractor (changes in cost to the Government). The contractor shall only take change orders from the Contracting Officer. Purchases or changes from unauthorized people may result in the contractor not receiving payment for costs incurred. It is emphasized that only a Contracting Officer has the authority to modify the terms of the contract, therefore, at no time will any understanding, agreement, modification, change order, or other matter deviating from the terms of the basic contract between the contractor and any other person be effective or binding on the Government. When /if, in the opinion of the contractor, an effort outside the existing scope of the contract is requested, the contractor shall promptly notify the Contracting Officer in writing. No action shall be taken by the contractor under such directions unless the Contracting Officer has issued a contractual change or otherwise resolved the issue.

Delivery On Or Before Delivery Date 12 Dec 2025

Party to Pay Transportation Cost: Contractor

Point Type: Destination

Line Item Delivery Schedule Quantity Address and POC Special Handling/Notes

Delivery On Or Before Delivery Date 12 Dec

1 Each Place of Performance DoDAAC: W58CGZ CountryCode: USA

W1EW USAG MIAMI

9301 NW 33RD ST, DORAL FL

33172-0000

DORAL, FL 33172-0000

FoB Details

Party to Pay Transportation Cost:

Contractor

UNITED STATES

Andres Garcia Email: andres.garcia56.civ@mail.mil Telephone: 305-437-2125

Point Type: Destination

Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.222-50 Combating Trafficking in Persons. Nov 2021 52.225-13 Restrictions on Certain Foreign Purchases. Feb 2021 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving. May 2024 52.232-33 Payment by Electronic Funds Transfer-System for Award Management. Oct 2018 52.232-36 Payment by Third Party. May 2014 52.233-3 Protest after Award. Aug 1996 52.233-4 Applicable Law for Breach of Contract Claim. Oct 2004 52.212-4 Contract Terms and Conditions-Commercial Products and Commercial Services. Nov 2023

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Dec 2022 252.204-7004 Antiterrorism Awareness Training for Contractors. Jan 2023 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting. May 2024

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

Jan 2023

252.204-7020 NIST SP 800-171 DoD Assessment Requirements. Nov 2023 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime. Jan 2023 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018 252.232-7010 Levies on Contract Payments. Dec 2006 252.244-7000 Subcontracts for Commercial Products or Commercial Services. Nov 2023 252.247-7023 Transportation of Supplies by Sea. Oct 2024

DFARS Clauses Incorporated by Full Text

252.225-7043 Antiterrorism/Force Protection for Defense Contractors Outside the United States. (Jun 2015)

ANTITERRORISM/FORCE PROTECTION POLICY FOR DEFENSE CONTRACTORS OUTSIDE THE UNITED STATES (JUN 2015)

(a) Definition. " United States ," as used in this clause, means, the 50 States, the District of Columbia , and outlying areas.

(b) Except as provided in paragraph (c) of this clause, the Contractor and its subcontractors, if performing or traveling outside the United States under this contract, shall-

(1) Affiliate with the Overseas Security Advisory Council, if the Contractor or subcontractor is a U.S. entity;

(2) Ensure that Contractor and subcontractor personnel who are U.S. nationals and are in-country on a non-transitory basis, register with the U.S.

Embassy, and that Contractor and subcontractor personnel who are third country nationals comply with any security related requirements of the Embassy of their nationality;

(3) Provide, to Contractor and subcontractor personnel, antiterrorism/force protection awareness information commensurate with that which the Department of Defense (DoD) provides to its military and civilian personnel and their families, to the extent such information can be made available prior to travel outside the United States; and

(4) Obtain and comply with the most current antiterrorism/force protection guidance for Contractor and subcontractor personnel.

(c) The requirements of this clause do not apply to any subcontractor that is-

(1) A foreign government;

(2) A representative of a foreign government; or

(3) A foreign corporation wholly owned by a foreign government.

(d) Information and guidance pertaining to DoD antiterrorism/force protection can be obtained from ____(Contracting Officer to insert applicable information cited in PGI 225.372-1 (DFARS/PGI view)).

(End of clause)

252.211-7003 Item Unique Identification and Valuation. (Jan 2023)

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) Definitions. As used in this clause-

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO) /International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD.

All DoD recognized unique identification equivalents are listed at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

" Enterprise " means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

" Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

" Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

SEE SCHEDULE ____

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(If items are identified in the Schedule, insert "See Schedule in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ____.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ____.

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that-

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall-

(A) Determine whether to-

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code-

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232- 7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com /site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods-

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ____, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial products or commercial services.

(End of clause)

Contract Terms and Conditions Required To Implement Statutes or Executive Orders — Commercial Products and Commercial Services

FAR Clauses Incorporated by Full Text

52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive Orders- Commercial Products and Commercial Services.

(Jan 2025)

Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Products and Commercial Services (Jan 2025)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec 2023) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889 (a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) (31 U.S.C. 3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

(7) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 ( 19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[Contracting Officer check as appropriate.]

[X] (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Jun 2020), with Alternate I (Nov 2021) (41 U.S.C. 4704 and 10 U.S.C.

4655).

[X] (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) (41 U.S.C. 3509)).

[X] (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111- 5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

[ ] (4) 52.203-17, Contractor Employee Whistleblower Rights (Nov 2023) (41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, the Coast Guard, or applicable elements of the intelligence community-see FAR 3.900(a).

[ ] (5) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub. L. 109-282) ( 31 U.S.C. 6101 note).

[ ] (6) [Reserved].

[ ] (7) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

[ ] (8) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

[ ] (9) 52.204-27, Prohibition on a ByteDance Covered Application (Jun 2023) (Section 102 of Division R of Pub. L. 117-328).

[ ] (10) 52.204-28, Federal Acquisition Supply Chain Security Act Orders-Federal Supply Schedules, Governmentwide Acquisition Contracts, and Multi-Agency Contracts. (Dec 2023) (Pub. L. 115-390, title II).

[ ] (11)

(i) 52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition. (Dec 2023) (Pub. L. 115-390, title II).

[ ] (ii) Alternate I (Dec 2023) of 52.204-30.

[ ] (12) 52.209-6, Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (Jan 2025) (31 U.S.C. 6101 note).

[ ] (13) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41 U.S.C. 2313).

[ ] (14) [Reserved].

[ ] (15) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Oct 2022) (15 U.S.C. 657a).

[ ] (16) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

[ ] (17) [Reserved]

[ ] (18)

(i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

[ ] (ii) Alternate I (Mar 2020) of 52.219-6.

[ ] (19)

(i) 52.219-7, Notice of Partial Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

[ ] (ii) Alternate I (Mar 2020) of 52.219-7.

[ ] (20) 52.219-8, Utilization of Small Business Concerns (Jan 2025)(15 U.S.C. 637(d)(2) and (3)).

[ ] (21)

(i) 52.219-9, Small Business Subcontracting Plan (Jan 2025) (15 U.S.C. 637(d)(4)).

[ ] (ii) Alternate I (Nov 2016) of 52.219-9.

[ ] (iii) Alternate II (Nov 2016) of 52.219-9.

[ ] (iv) Alternate III (Jun 2020) of 52.219-9.

[ ] (v) Alternate IV (Jan 2025) of 52.219-9.

[ ] (22)

(i) 52.219-13, Notice of Set-Aside of Orders (Mar 2020) (15 U.S.C. 644(r)).

[ ] (ii) Alternate I (Mar 2020) of 52.219-13.

[ ] (23) 52.219-14, Limitations on Subcontracting (Oct 2022) (15 U.S.C. 657s).

[ ] (24) 52.219-16, Liquidated Damages-Subcontracting Plan (Sep 2021) (15 U.S.C. 637(d)(4)(F)(i)).

[ ] (25) 52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran-Owned Small Business (SDVOSB) Concerns Eligible Under the SDVOSB Program (Feb 2024) (15 U.S.C. 657f).

[ ] (26)

(i) 52.219-28, Postaward Small Business Program Rerepresentation (Jan 2025) (15 U.S.C. 632(a)(2)).

[ ] (ii) Alternate I (Mar 2020) of 52.219-28.

[ ] (27) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Oct 2022) (15 U.S.C. 637(m)).

[ ] (28) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Oct 2022) (15 U.S.C. 637(m)).

[ ] (29) 52.219-32, Orders Issued Directly Under Small Business Reserves (Mar 2020) (15 U.S.C. 644(r)).

[ ] (30) 52.219-33, Nonmanufacturer Rule (Sep 2021) (15 U.S.C. 637(a)(17)).

[X] (31) 52.222-3, Convict Labor (Jun 2003) (E.O.11755).

[X] (32) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Jan 2025)(E.O. 13126).

[ ] (33) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

[ ] (34)

(i) 52.222-26, Equal Opportunity (Sep 2016) (E.O.11246).

[ ] (ii) Alternate I (Feb 1999) of 52.222-26.

[ ] (35)

(i) 52.222-35, Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212).

[ ] (ii) Alternate I (Jul 2014) of 52.222-35.

[ ] (36)

(i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C. 793).

[ ] (ii) Alternate I (Jul 2014) of 52.222-36.

[ ] (37) 52.222-37, Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212).

[ ] (38) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

[ ] (39)

(i) 52.222-50, Combating Trafficking in Persons (Nov 2021) (22 U.S.C. chapter 78 and E.O. 13627).

[ ] (ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

[ ] (40) 52.222-54, Employment Eligibility Verification (Jan 2025) (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

[ ] (41)

(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

[ ] (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

[ ] (42) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (May 2024) (42 U.S.C. 7671, et seq.).

[ ] (43) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (May 2024) (42 U.S.C. 7671, et seq.).

[ ] (44) 52.223-20, Aerosols (May 2024) (42 U.S.C. 7671, et seq.).

[ ] (45) 52.223-21, Foams (May 2024) (42 U.S.C. 7671, et seq.).

[ ] (46) 52.223-23, Sustainable Products and Services (May 2024) (E.O. 14057, 7 U.S.C. 8102, 42 U.S.C. 6962, 42 U.S.C. 8259b, and 42 U.S.C.

7671l).

[ ] (47)

(i) 52.224-3 Privacy Training (Jan 2017) (5 U.S.C. 552 a).

[ ] (ii) Alternate I (Jan 2017) of 52.224-3.

[ ] (48)

(i) 52.225-1, Buy American-Supplies (Oct 2022) (41 U.S.C. chapter 83).

[ ] (ii) Alternate I (Oct 2022) of 52.225-1.

[ ] (49)

(i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (NOV 2023) (19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

[ ] (ii) Alternate I [Reserved].

[ ] (iii) Alternate II (Jan 2025) of 52.225-3.

[ ] (iv) Alternate III (Feb 2024) of 52.225-3.

[ ] (v) Alternate IV (Oct 2022) of 52.225-3.

[X] (50) 52.225-5, Trade Agreements (NOV 2023) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

[ ] (51) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

[ ] (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

[ ] (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).

[ ] (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).

[ ] (55) 52.226-8, Encouraging Contractor Policies to Ban Text Messaging While Driving (May 2024) (E.O. 13513).

[ ] (56) 52.229-12, Tax on Certain Foreign Procurements (Feb 2021).

[ ] (57) 52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (Nov 2021) (41 U.S.C. 4505, 10 U.S.C.

3805).

[ ] (58) 52.232-30, Installment Payments for Commercial Products and Commercial Services (Nov 2021) (41 U.S.C. 4505, 10 U.S.C. 3805).

[ ] (59) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct2018) (31 U.S.C. 3332).

[ ] (60) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31 U.S.C. 3332).

[X] (61) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332).

[ ] (62) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

[ ] (63) 52.240-1, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign Entities (Nov 2024) (Sections 1821-1826, Pub. L. 118-31, 41 U.S.C. 3901 note prec.).

[ ] (64) 52.242-5, Payments to Small Business Subcontractors (Jan 2017) (15 U.S.C. 637(d)(13)).

[ ] (65)

(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Nov 2021) (46 U.S.C. 55305 and 10 U.S.C. 2631).

[ ] (ii) Alternate I (Apr 2003) of 52.247-64.

[ ] (iii) Alternate II (Nov 2021) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[Contracting Officer check as appropriate.]

[ ] (1) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.