Solicitation W9128F22Q0111.pdf

SEE ADDENDUM

(No Collect Calls)

W9128F22Q0111 29-Aug-2022

b. TELEPHONE NUMBER

402-995-2697

8. OFFER DUE DATE/LOCAL TIME

02:00 PM 13 Sep 2022

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W9128F9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

DESIREE M PETERS

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESS

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

U.S. ARMY CORPS OF ENGINEERS, OMAHA DIST

CONTRACTING OFFICE

1616 CAPITOL AVENUE

OMAHA NE 68102-4901

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE 966752 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

COE PROGRAMS MANAGEMENT BRANCH

LAURA STEPHENS

USA, OMAHA CENWO-PM-P

1616 CAPITOL AVE

OMAHA NE 68102-4901

TEL: 402-995-2802 FAX:

FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

X 8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

$17,000,000

NAICS:

541990

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF63

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W9128F22Q0111

Section SF 1449 - CONTINUATION SHEET

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Job API External Tank Inspect- FAC 802

FFP

All work to conduct Kick-Off Meeting, complete API external tank inspection, complete visual inspection of containment, and complete DRAFT and FINAL reports FOB: Destination

PSC CD: H391

NET AMT

0002 1 Job API External Tank Inspect- FAC 806

FFP

All work to conduct Kick-Off Meeting, complete API external tank inspection, complete visual inspection of containment, and complete DRAFT and FINAL reports

0003 1 Job API External Tank Inspect- FAC 807

FFP

All work to conduct Kick-Off Meeting, complete API external tank inspection, complete visual inspection of containment, and complete DRAFT and FINAL reports

0004 1 Job STI Internal Tank Inspect FAC 870

FFP

All work to conduct Kick-Off Meeting, complete STI Internal tank inspection, fuel removal/transfer, tank cleaning, UT scanning, complete visual inspection of containment, and complete DRAFT and FINAL reports

PERFORMANCE WORK STATEMENT

SP-POL-CMP-INSPECT-PWS-PO 05

Arnold AFB, TN

Part 1 General Information

1. GENERAL:

1.1. Scope: This is a non-personnel services contract to perform inspections on Department of Defense fuel tanks. This service entails removal, disposal, of remaining fuel, tank cleaning, and providing an above-ground storage tank (AST) Inspection on tank(s) listed in Attachment B. The Government shall not exercise any supervision or control over the contract service providers performing the services herein. Such contract service providers shall be accountable solely to the Contractor who, in turn, is responsible to the Government.

1.2. Background: See attachment J.1, J.2 & J.3 for previous inspection report(s).

1.3. Objectives: The contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non-personal services necessary to set floating pan legs to their maintenance level, execute the fuel removal, and disposal of remaining fuel, clean the tank, perform an AST Internal and External inspection on the tank(s) as applicable at the location and tanks specified in attachment B as defined in this Performance Work Statement (PWS) except for those items specified as government furnished property and services. The contractor shall perform to the standards in this contract.

1.4. Period of Performance: The period of performance shall be for 120 calendar days starting at the date of contract award. Earlier completion of required services is encouraged and acceptable.

1.5. General Information

1.5.1. Quality Assurance: The government will evaluate the contractor’s performance under this contract in accordance with the Quality Assurance Surveillance Plan. This plan is primarily focused on what the Government must do to ensure that the contractor has performed in accordance with the performance standards. It defines how the performance standards will be applied, the frequency of surveillance, and the minimum acceptable defect rate(s).

1.5.2. Recognized Holidays:

New Year’s Day Martin Luther King Birthday President’s Day Memorial Day Juneteenth National Independence Day Independence Day Labor Day Columbus Day Veteran’s Day Thanksgiving Christmas

1.5.3. Hours of Operation: The contractor is responsible for conducting business, between the hours of 0730-1630 Monday through Friday, except Federal holidays or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government directed facility closings. Other than normal duty hours must be coordinated with the KO or his/her designated representative. The Contractor must at all times maintain an adequate workforce for the uninterrupted performance of all tasks defined within this PWS when the Government facility is not closed for the above reasons. When hiring personnel, the Contractor shall maintain stability and continuity of the workforce.

1.5.4. Place of Performance: The work to be performed under this contract will be performed at the installation and facilities identified in Attachment B.

1.5.5. Type of Contract: The government will award a Firm Fixed Price Contract

1.5.6. Security Requirements: Reference Attachment A – General Installation Security Requirements

1.5.7. Site Access: Contractor shall coordinate with Installation personnel for access to the site. Points of contact for the installation will be provided upon award.

1.5.8. Meetings/Kick-Off Meetings: The Contractor shall coordinate with USACE PM and conduct a kickoff meeting prior to field activities. This can be accomplished either prior to mobilization and inspection activities or onsite prior to commencement of inspection activities. The Work Plan shall be discussed, and further coordination and scheduling accomplished at this meeting. These meetings shall be at no additional cost to the government.

API Internal:

1.5.8.1. The Contractor shall call the installation 72 hours prior to mobilization to verify tank fuel quantities are at the quoted/verified amount as stated in Attachment B as the contractor is not authorized to remove/transfer or dispose of more fuel than what is stated in the contract per Attachment B.

1.5.8.2. The Contractor shall be responsible to establish a report of findings and coordinate a teleconference after the inspection is complete and at least 24 hours prior to placing tank back into service. This teleconference will review deficiencies found during the inspection with the Government making the final decision on whether or not to place this tank back into service. The Contractor can use Attachment E - API INTERNAL INSPECTION TELECON BRIEFING TEMPLATE or their own format however this document shall include the next recommended inspection intervals for both External and Internal Inspection, and State regulated inspection intervals, if applicable. Also, when listing the findings, they shall be categorized as either “Mandatory”, “Recommended”. Coordinate with POC’s from Service Control Point (SCP), DLA, and USACE. Individuals to be identified after project award.

1.5.9. Contracting Officer Representative (COR): The (COR) will be identified by separate letter.

1.5.9.1. The COR is authorized to perform the following functions:

assure that the Contractor performs the technical requirements of the contract perform inspections necessary in connection with contract performance maintain written and oral communications with the Contractor concerning technical aspects of the contract issue written interpretations of technical requirements, including Government drawings, designs, specification monitor Contractor's performance and notifies both the Contracting Officer and Contractor of any deficiencies assist in coordinating availability of government furnished property

A letter of designation issued to the COR, a copy of which is sent to the Contractor, states the responsibilities and limitations of the COR, especially with regards to changes in cost or price, estimates or changes in delivery dates. The COR is not authorized to change any of the terms and conditions of the resulting order.

1.5.10. Key Personnel: Certified API 653 Inspector and Project Manager.

1.5.11. Organizational Conflict of Interest: Contractor and subcontractor personnel performing work under this contract may receive, have access to or participate in the development of proprietary or source selection information (e.g., cost or pricing information, budget information or analyses, specifications or work statements, etc.) or perform evaluation services which may create a current or subsequent Organizational Conflict of Interests (OCI) as defined in FAR Subpart 9.5. The Contractor shall notify the Contracting Officer immediately whenever it becomes aware that such access or participation may result in any actual or potential OCI and shall promptly submit a plan to the Contracting Officer to avoid or mitigate any such OCI. The Contractor’s mitigation plan will be determined to be acceptable solely at the discretion of the Contracting Officer and in the event the Contracting Officer unilaterally determines that any such OCI cannot be satisfactorily avoided or mitigated, the Contracting Officer may effect other remedies as they deem necessary, including prohibiting the Contractor from participation in subsequent contracted requirements which may be affected by the OCI.

1.5.12. Suitability For Service: Evaluate inspection data to determine suitability for continued use. Identify conditions which pose a risk to integrity. Determine a metal loss threshold for mandatory repairs. In the determination of mandatory repairs:

Use a "first, do no harm" approach to classifying tank repairs.

Use Desired Service Interval as the time to next inspection unless notified otherwise by the

Contracting Officer.

Use minimum remaining thickness (MRT) no less than 100 mils at the next inspection.

Do not classify as mandatory repair of conditions which are noncompliant with current standards but are un-related to structural or hydraulic integrity (e.g., gouge, improper weld spacing, weld profile).

Apply repair determination to individual indications. Do not average across an entire plate or course.

PART 2

DEFINITIONS & ACRONYMS

2. DEFINITIONS AND ACRONYMS:

2.1. DEFINITIONS:

2.1.1. CONTRACTOR. A supplier or vendor awarded a contract to provide specific supplies or service to the government. The term used in this contract refers to the prime.

2.1.2. CONTRACTING OFFICER. A person with authority to enter into, administer, and or terminate contracts, and make related determinations and findings on behalf of the government. Note: The only individual who can legally bind the government.

2.1.3. CONTRACTING OFFICER'S REPRESENTATIVE (COR). An employee of the U.S. Government appointed by the contracting officer to administer the contract. Such appointment shall be in writing and shall state the scope of authority and limitations. This individual has authority to provide technical direction to the Contractor as long as that direction is within the scope of the contract, does not constitute a change, and has no funding implications. This individual does NOT have authority to change the terms and conditions of the contract.

2.1.4. DEFECTIVE SERVICE. A service output that does not meet the standard of performance associated with the Performance Work Statement.

2.1.5. DELIVERABLE. Anything that can be physically delivered but may include non-manufactured things such as meeting minutes or reports.

2.1.6. KEY PERSONNEL. Contractor personnel that are evaluated in a source selection process and that may be required to be used in the performance of a contract by the Key Personnel listed in the PWS.

When key personnel are used as an evaluation factor in best value procurement, an offer can be rejected if it does not have a firm commitment from the persons that are listed in the proposal.

2.1.7. MANDATORY REPAIR. Action necessary to preserve or restore the structural and hydraulic integrity of the tank or piping, or to mitigate a safety hazard. Includes any condition which has or may breach the hydraulic or structural integrity of the tank prior to the next integrity inspection.

2.1.8. PHYSICAL SECURITY. Actions that prevent the loss or damage of Government property.

2.1.9. QUALITY ASSURANCE. The government procedures to verify that services being performed by the

Contractor are performed according to acceptable standards.

2.1.10. QUALITY ASSURANCE SURVEILANCE PLAN (QASP). An organized written document specifying the surveillance methodology to be used for surveillance of contractor performance.

2.1.11. QUALITY CONTROL. All necessary measures taken by the Contractor to assure that the quality of an end product or service shall meet contract requirements.

2.1.12. RECOMMENDED REPAIR. Action intended to extend the service life of the tank or piping and to address conditions that currently, or within the next service interval, will not have an adverse effect on tank operability or integrity. Applicability is limited to exclude soft or elastomeric parts for any pressure containing system.

2.1.13. SUBCONTRACTOR. One that enters into a contract with a prime contractor. The Government does not have privity of contract with the subcontractor.

2.1.14. TANK INSPECTION. A multi-disciplinary engineering assessment of al petroleum, oil, and lubricant storage tank systems within or connected to the tank hydraulic boundary. Systems include nozzles, appurtenances, and conveyance systems such as piping, stilling well, valve, flow control, cathodic protection, overfill protection, spill prevention, containment, leak detection, fire suppression, gauging, ventilation, lighting, and other electrical systems. Inspection includes a review of cathodic protection reports and relevant as-built records when available. Unless stated otherwise, the limits are the boundary of secondary containment.

2.1.15. TANK INSPECTOR. An individual certified as a fuel storage tank inspector. The recognized certification is API Std 653.

2.1.16. WORKDAY. The number of hours per day the Contractor provides services in accordance with the contract.

2.1.17. WORK WEEK. Monday through Friday, unless specified otherwise.

2.2. ACRONYMS:

ACOR Alternate Contracting Officer's Representative AFARS Army Federal Acquisition Regulation Supplement ANG Army National Guard AR Army Regulation AST Aboveground Storage Tank API American Petroleum Institute

ATG Automatic Tank Gauging AWWA American Water Works Association CCE Contracting Center of Excellence CFR Code of Federal Regulations CONUS Continental United States (excludes Alaska and Hawaii) COR Contracting Officer Representative COTR Contracting Officer's Technical Representative COTS Commercial-Off-the-Shelf DAF Department of the Air Force DD250 Department of Defense Form 250 (Receiving Report) DD254 Department of Defense Contract Security Requirement List DFARS Defense Federal Acquisition Regulation Supplement DMDC Defense Manpower Data Center DOD Department of Defense EPA Environmental Protection Agency FAR Federal Acquisition Regulation HIPAA Health Insurance Portability and Accountability Act of 1996 IAP International Airport KO Contracting Officer MOGAS Motor Gasoline NFPA National Fire Protection Association OCI Organizational Conflict of Interest OCONUS Outside Continental United States (includes Alaska and Hawaii) ODC Other Direct Costs PIPO Phase In/Phase Out POC Point of Contact PRS Performance Requirements Summary PWS Performance Work Statement QA Quality Assurance QAP Quality Assurance Program QASP Quality Assurance Surveillance Plan QC Quality Control QCP Quality Control Program RTO Returned to Operator STI Steel Tank Institute SCP Service Control Point TE Technical Exhibit UFC Unified Facilities Criteria UFGS Unified Facilities Guide Specification

PART 3

GOVERNMENT FURNISHED PROPERTY, EQUIPMENT, AND

SERVICES

3. GOVERNMENT FURNISHED ITEMS AND SERVICES:

3.1. Services: No Government furnished items or services are required.

PART 4

CONTRACTOR FURNISHED ITEMS AND SERVICES

4. CONTRACTOR FURNISHED ITEMS AND RESPONSIBILITIES:

4.1. General: The Contractor shall furnish all supplies, equipment, facilities, and services required to perform work under this contract that are not listed under Section 3 of this PWS.

4.2. Equipment: The Contractor shall provide all tools and inspection equipment needed to perform the inspection and other services to be performed under the PWS.

4.2.1. Precision Equipment: Contractor is responsible to ensure all equipment to be used is certified and calibrated to the parameters and tolerances of the required equipment.

4.2.2. Gaskets: Composition ring, one piece factory cut, compliant with ASME B16.21, Buna-N. Gaskets must be composed of either graphite or synthetic fibers in a nitrile binder and must be resistant to the effects of aviation hydrocarbon fuels and manufactured of fire-resistant materials. Use full-faced gaskets for flat-face flanged joints. Buna-N material must conform to SAE AMS3275.

4.2.3. Flange Bolts, Nuts, and Washers: Bolts for manway covers must conform to ASME B18.2.1. Bolts must be of sufficient length to obtain full bearing on the nuts and must project no more than three full threads beyond the nuts with the bolts tightened to the required torque. Bolts must be regular hexagonal bolts conforming to ASME B18.2.1 with material conforming to ASTM A193/A193M, Class 2, Grade B8. Bolts must be threaded in accordance with ASME B1.1, Class 2A fit, Coarse Thread Series, for sizes one inch and smaller and Eight-Pitch Thread Series for sizes larger than one inch. Use stainless steel washers dimensioned in accordance with ASTM F436 flat circular and fabricated from the same grade of stainless steel as the bolt.

4.3. Project Inspection Management Plan (PMP): As part of the initial PMP, the Contractor shall prepare and include a brief (< 10 pages) Work Plan, as an attachment, which will include proposed schedule, inspection activities, personnel performing inspection, required training certificates, and additional data or support requests.

4.4. Health and Safety Plan (HSP) and Accident Prevention Plan (APP): The Contractor will prepare a

Health and Safety Plan (HSP) to comply with 29 Code of Federal Regulations (CFR) 1910 and 1926 as well as applicable Military Service (Army, Air Force, or Navy), OSHA, state, host nation, and local and installation health and safety regulations regarding the proposed work effort. Qualifications for individuals who will be on-site for safety shall be submitted in the HSP.

4.4.1. The Accident Prevention Plan (APP) is required by FAR clause 52.236-13. The APP describes the methods by which the contractor or USACE personnel will meet the safety and health requirements listed in EM 385-1-1. Entry into Confined Spaces shall comply with the requirements of 29 CFR

1910.146. Provide additional monitoring for toxic (petroleum) vapors in addition to normal air monitoring requirements.

4.4.2. Abbreviated Accident Prevention Plans may be developed and submitted per Form A-01 Abbreviated

Accident Prevention Plan Checklist page A-13 of the EM 385-1-1. This may be submitted in order to develop a plan more specific to the work performed under this PWS but shall still comply as indicated above.

PART 5

SPECIFIC TASKS

5. Specific Tasks: Per each tank as identified in attachment B

5.1. Basic Services.

API External:

5.1.1. Perform a Tel-con kick-off meeting either prior to mobilization or the morning of the commencement of work on-site.

5.1.2. Perform an external AST inspection to include visual inspection of the containment area. The tank

Inspection shall be in conformance with applicable industry standards API 653, API RP 575, NFPA 30, NFPA 326, UFGS 33 01 50.65, and in compliance with 40 CFR 112, UFC 3-460-01, UFC 3-460- 03 and any other applicable federal, state, local and service. Complete the API Std 653 checklist and provide them with the DRAFT and FINAL reports. Utilize UFC 3-460-01 Table 8-1 and indicate appurtenances that are not present. Alarms, Automatic Tank Gauge equipment, and all tank appurtenances shall be tested and verified. The attached Inspection Report template should be utilized in submitting both the DRAFT and FINAL inspection reports. Contractor shall leave a clean and orderly site upon the completion of the inspection.

5.1.3. The contractor shall visually inspect containment for ability to contain the entire contents of the tank in the event of catastrophic failure, assessing for cracks, settlement, and deterioration. Record dimensions of cracks and provide photographic evidence of each deficiency. Visually assess the liner integrity and impermeability where applicable.

5.1.4. Provide DRAFT and FINAL inspection reports per the attached templates. The report(s) must include a record of NDE findings with drawings depicting plate layout and thickness measurement locations, if applicable. Incorporate engineering analysis, suitability for service analysis, corrosion rate determinations, and remaining service life calculations. Provide separate report for each tank inspected. Specify the due date for the next inspection. Include the API Std 653 inspector of record certificate number and signature.

PART 6

APPLICABLE PUBLICATIONS

6. APPLICABLE PUBLICATIONS (CURRENT EDITIONS)

6.1. The Contractor must abide by all applicable regulations, publications, manuals, and local policies and procedures.

Steel Tank Institute (STI) SP001 Standard for the Inspection of Aboveground Storage Tanks

American Petroleum Institute (API) 653 Standard for the Tank Inspection, Repair, Alteration, and Reconstruction 650 Welded Tanks for Oil Storage RP 575 Inspection Practices for Atmospheric and Low-pressure Storage Tanks

NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)

NFPA 30 Flammable and Combustible Liquids Code NFPA 70 National Electrical Code (NEC) NFPA 326 Standard for Safeguarding of Tanks and Containers for Entry, Cleaning, or Repairs

UNIFIED FACILITIES CRITERIA (UFC)

UFC 3-460-01 Design: Petroleum Fuel Facilities UFC 3-460-03 Petroleum Fuel Systems Maintenance

UNIFIED FACILITIES GUIDE SPECIFICATIONS (UFGS)

UFGS 33 01 50.55 Cleaning of Petroleum Storage Tanks UFGS 33 01 50.65 Inspection of Field Fabricated Fuel Storage Tanks UFGS 33 56 21.17 Single Wall Aboveground Fixed Roof Steel POL Storage Tank

U.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)

40 CFR 112 EPA: Oil Pollution Prevention

PART 7

ATTACHMENT

7. Attachment/Technical Exhibit List:

7.1. Attachment A – General Installation Security Requirements

7.2. Attachment B – Fuel Storage Tank List

7.3. Attachment C – Fuel Storage Tank Data Sheet

7.4. Attachment D – Monthly Contractors Progress, Management and Status Report

7.5. Attachment E – Not Applicable

7.6. Attachment F – Not Applicable

7.7. Attachment G – Not Applicable

7.8. Attachment H – Not Applicable

7.9. Attachment I – API External Template

7.10. Attachment J.1, J.2, J.3 – Previous Inspection Reports

TECHNICAL EXHIBIT 1

Performance Requirements Summary

The contractor service requirements are summarized into performance objectives that relate directly to mission essential items. The performance threshold briefly describes the minimum acceptable levels of service required for each requirement. These thresholds are critical to mission success.

API External:

Performance Objective

Standard Performance Threshold

Method of Surveillance

PRS # 1.

Kick-Off Meeting with USACE and Stakeholders

Para. 5.1.1.

State, local, and federal requirements regulating fuel storage tanks

100% The contractor will schedule this Meeting either on-site prior to commencement of work or via tel-con prior to being onsite. Submit agenda and meeting minutes to stakeholders.

PRS # 2.

On Site Inspection

Para. 5.1.2.

State, local, and federal requirements regulating fuel storage tanks.

100% Random Inspection.

DELIVERABLES SCHEDULE

DELIVERABLE SCOPE OF

WORK

PARAGRAPH

DUE DATE

Project Inspection Management Plan/Work Plan, Accident Prevention Plan & Health and Safety Plan (Draft)

4.3 & 4.4 15 days after award

Project Inspection Management Plan/Work Plan, Accident Prevention Plan & Health and Safety Plan (Final)

4.3 & 4.4 5 days after receipt of comments

Inspection and Evaluation Report – (Draft) 5.1.4

28 days after Field Inspection

Inspection and Evaluation Report – to include populated Attachment C Excel Sheet for each base (Final)

5.1.4

7 days after receipt of comments

SCA WD 2015-4655 REV21 27JUN22

"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-4655 Daniel W. Simms Division of | Revision No.: 21 Director Wage Determinations| Date Of Last Revision: 06/27/2022

Note: Contracts subject to the Service Contract Act are generally required to pay at least the applicable minimum wage rate required under Executive Order 14026 or Executive Order 13658.

|If the contract is entered into on or |With certain exceptions Executive Order | |after January 30 2022 or the |14026 applies to the contract. | |contract is renewed or extended (e.g. |The contractor must pay all covered workers | |an option is exercised) on or after |at least $15.00 per hour (or the applicable | |January 30 2022: |wage rate listed on this wage determination| | |if it is higher) for all hours spent | | |performing on the contract in 2022. |

PRS # 4.

Provide an API 653 Internal Inspection reports

Para 5.1.4.

State, local, and federal requirements regulating fuel storage tanks

100% Random Inspection.

The contractor is to provide a DRAFT and FINAL report for MCX review and comment

|If the contract is entered into on or |With certain exceptions Executive Order | |after January 30 2022 or the |13658 applies to the contract. | |2022 and the contract is not renewed |The contractor must pay all covered workers | |or extended on or after January 30 |at least $11.25 per hour (or the applicable | |2022: |wage rate listed on this wage determination| | |if it is higher) for all hours spent | | |performing on the contract in 2022. |

The applicable Executive Order minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the Executive Orders is available at https://www.dol.gov/agencies/whd/government-contracts.

State: Tennessee

Area: Tennessee Counties of Coffee Franklin Grundy

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 14.07*** 01012 - Accounting Clerk II 15.80 01013 - Accounting Clerk III 17.67 01020 - Administrative Assistant 23.00 01035 - Court Reporter 18.18 01041 - Customer Service Representative I 13.17*** 01042 - Customer Service Representative II 14.82*** 01043 - Customer Service Representative III 16.16 01051 - Data Entry Operator I 14.71*** 01052 - Data Entry Operator II 16.05 01060 - Dispatcher Motor Vehicle 18.58 01070 - Document Preparation Clerk 14.48*** 01090 - Duplicating Machine Operator 14.48*** 01111 - General Clerk I 13.11*** 01112 - General Clerk II 14.31*** 01113 - General Clerk III 16.07 01120 - Housing Referral Assistant 20.27 01141 - Messenger Courier 11.81*** 01191 - Order Clerk I 13.16*** 01192 - Order Clerk II 14.36*** 01261 - Personnel Assistant (Employment) I 15.99 01262 - Personnel Assistant (Employment) II 17.90 01263 - Personnel Assistant (Employment) III 19.95 01270 - Production Control Clerk 22.42 01290 - Rental Clerk 12.24*** 01300 - Scheduler Maintenance 16.25 01311 - Secretary I 16.25 01312 - Secretary II 18.18 01313 - Secretary III 20.27 01320 - Service Order Dispatcher 15.78 01410 - Supply Technician 23.00 01420 - Survey Worker 14.55*** 01460 - Switchboard Operator/Receptionist 13.45*** 01531 - Travel Clerk I 12.66*** 01532 - Travel Clerk II 13.54*** 01533 - Travel Clerk III 14.29*** 01611 - Word Processor I 14.48*** 01612 - Word Processor II 16.25

01613 - Word Processor III 18.18 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer Fiberglass 21.31 05010 - Automotive Electrician 18.03 05040 - Automotive Glass Installer 17.15 05070 - Automotive Worker 17.15 05110 - Mobile Equipment Servicer 15.38 05130 - Motor Equipment Metal Mechanic 18.87 05160 - Motor Equipment Metal Worker 17.15 05190 - Motor Vehicle Mechanic 17.67 05220 - Motor Vehicle Mechanic Helper 14.45*** 05250 - Motor Vehicle Upholstery Worker 16.26 05280 - Motor Vehicle Wrecker 17.15 05310 - Painter Automotive 18.03 05340 - Radiator Repair Specialist 17.15 05370 - Tire Repairer 12.54*** 05400 - Transmission Repair Specialist 17.67 07000 - Food Preparation And Service Occupations 07010 - Baker 14.20*** 07041 - Cook I 11.80*** 07042 - Cook II 13.28*** 07070 - Dishwasher 9.10*** 07130 - Food Service Worker 10.24*** 07210 - Meat Cutter 17.35 07260 - Waiter/Waitress 8.96*** 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 19.56 09040 - Furniture Handler 13.61*** 09080 - Furniture Refinisher 19.98 09090 - Furniture Refinisher Helper 15.98 09110 - Furniture Repairer Minor 18.05 09130 - Upholsterer 19.56 11000 - General Services And Support Occupations 11030 - Cleaner Vehicles 14.50*** 11060 - Elevator Operator 14.24*** 11090 - Gardener 17.67 11122 - Housekeeping Aide 11.68*** 11150 - Janitor 11.68*** 11210 - Laborer Grounds Maintenance 14.07*** 11240 - Maid or Houseman 10.71*** 11260 - Pruner 12.74*** 11270 - Tractor Operator 16.53 11330 - Trail Maintenance Worker 14.07*** 11360 - Window Cleaner 12.90*** 12000 - Health Occupations 12010 - Ambulance Driver 15.93 12011 - Breath Alcohol Technician 18.45 12012 - Certified Occupational Therapist Assistant 28.64 12015 - Certified Physical Therapist Assistant 34.39 12020 - Dental Assistant 17.90 12025 - Dental Hygienist 36.08 12030 - EKG Technician 27.74 12035 - Electroneurodiagnostic Technologist 27.74 12040 - Emergency Medical Technician 15.93 12071 - Licensed Practical Nurse I 16.50 12072 - Licensed Practical Nurse II 18.45 12073 - Licensed Practical Nurse III 20.56 12100 - Medical Assistant 14.47*** 12130 - Medical Laboratory Technician 23.01 12160 - Medical Record Clerk 15.10 12190 - Medical Record Technician 17.84 12195 - Medical Transcriptionist 17.33

12210 - Nuclear Medicine Technologist 40.55 12221 - Nursing Assistant I 12.17*** 12222 - Nursing Assistant II 13.68*** 12223 - Nursing Assistant III 14.93*** 12224 - Nursing Assistant IV 16.75 12235 - Optical Dispenser 22.57 12236 - Optical Technician 16.50 12250 - Pharmacy Technician 16.03 12280 - Phlebotomist 16.36 12305 - Radiologic Technologist 24.74 12311 - Registered Nurse I 23.81 12312 - Registered Nurse II 29.13 12313 - Registered Nurse II Specialist 29.13 12314 - Registered Nurse III 35.23 12315 - Registered Nurse III Anesthetist 35.23 12316 - Registered Nurse IV 42.24 12317 - Scheduler (Drug and Alcohol Testing) 22.86 12320 - Substance Abuse Treatment Counselor 16.93 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 20.65 13012 - Exhibits Specialist II 25.58 13013 - Exhibits Specialist III 31.28 13041 - Illustrator I 20.65 13042 - Illustrator II 25.58 13043 - Illustrator III 31.28 13047 - Librarian 28.33 13050 - Library Aide/Clerk 13.98*** 13054 - Library Information Technology Systems 25.58 Administrator 13058 - Library Technician 17.88 13061 - Media Specialist I 18.46 13062 - Media Specialist II 20.65 13063 - Media Specialist III 23.01 13071 - Photographer I 18.46 13072 - Photographer II 20.65 13073 - Photographer III 25.58 13074 - Photographer IV 31.28 13075 - Photographer V 37.86 13090 - Technical Order Library Clerk 18.33 13110 - Video Teleconference Technician 18.46 14000 - Information Technology Occupations 14041 - Computer Operator I 15.11 14042 - Computer Operator II 18.05 14043 - Computer Operator III 20.10 14044 - Computer Operator IV 21.52 14045 - Computer Operator V 23.19 14071 - Computer Programmer I (see 1) 22.90 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 15.11 14160 - Personal Computer Support Technician 21.52 14170 - System Support Specialist 23.00 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 32.13 15020 - Aircrew Training Devices Instructor (Rated) 37.97 15030 - Air Crew Training Devices Instructor (Pilot) 45.52 15050 - Computer Based Training Specialist / Instructor 32.13 15060 - Educational Technologist 31.69

15070 - Flight Instructor (Pilot) 45.52 15080 - Graphic Artist 20.15 15085 - Maintenance Test Pilot Fixed Jet/Prop 45.52 15086 - Maintenance Test Pilot Rotary Wing 45.52 15088 - Non-Maintenance Test/Co-Pilot 45.52 15090 - Technical Instructor 19.34 15095 - Technical Instructor/Course Developer 24.88 15110 - Test Proctor 16.71 15120 - Tutor 16.71 16000 - Laundry Dry-Cleaning Pressing And Related Occupations 16010 - Assembler 9.61*** 16030 - Counter Attendant 9.61*** 16040 - Dry Cleaner 12.07*** 16070 - Finisher Flatwork Machine 9.61*** 16090 - Presser Hand 9.61*** 16110 - Presser Machine Drycleaning 9.61*** 16130 - Presser Machine Shirts 9.61*** 16160 - Presser Machine Wearing Apparel Laundry 9.61*** 16190 - Sewing Machine Operator 12.83*** 16220 - Tailor 13.56*** 16250 - Washer Machine 10.42*** 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 19.53 19040 - Tool And Die Maker 23.55 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 18.41 21030 - Material Coordinator 22.42 21040 - Material Expediter 22.42 21050 - Material Handling Laborer 14.48*** 21071 - Order Filler 13.63*** 21080 - Production Line Worker (Food Processing) 18.41 21110 - Shipping Packer 18.47 21130 - Shipping/Receiving Clerk 18.47 21140 - Store Worker I 13.61*** 21150 - Stock Clerk 18.44 21210 - Tools And Parts Attendant 18.41 21410 - Warehouse Specialist 18.41 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 25.04 23019 - Aircraft Logs and Records Technician 20.30 23021 - Aircraft Mechanic I 23.88 23022 - Aircraft Mechanic II 25.04 23023 - Aircraft Mechanic III 26.20 23040 - Aircraft Mechanic Helper 17.91 23050 - Aircraft Painter 22.68 23060 - Aircraft Servicer 20.30 23070 - Aircraft Survival Flight Equipment Technician 22.68 23080 - Aircraft Worker 21.54 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 21.54 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 23.88

II

23110 - Appliance Mechanic 22.68 23120 - Bicycle Repairer 19.15 23125 - Cable Splicer 38.10 23130 - Carpenter Maintenance 18.70 23140 - Carpet Layer 21.54 23160 - Electrician Maintenance 29.59 23181 - Electronics Technician Maintenance I 23.69 23182 - Electronics Technician Maintenance II 26.48 23183 - Electronics Technician Maintenance III 29.81 23260 - Fabric Worker 20.30

23290 - Fire Alarm System Mechanic 23.88 23310 - Fire Extinguisher Repairer 19.15 23311 - Fuel Distribution System Mechanic 23.88 23312 - Fuel Distribution System Operator 19.15 23370 - General Maintenance Worker 19.01 23380 - Ground Support Equipment Mechanic 23.88 23381 - Ground Support Equipment Servicer 20.30 23382 - Ground Support Equipment Worker 21.54 23391 - Gunsmith I 19.15 23392 - Gunsmith II 21.54 23393 - Gunsmith III 23.88 23410 - Heating Ventilation And Air-Conditioning 18.18 Mechanic 23411 - Heating Ventilation And Air Contidioning 19.07 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 21.85 23440 - Heavy Equipment Operator 21.78 23460 - Instrument Mechanic 23.88 23465 - Laboratory/Shelter Mechanic 22.68 23470 - Laborer 14.48*** 23510 - Locksmith 22.68 23530 - Machinery Maintenance Mechanic 24.46 23550 - Machinist Maintenance 23.19 23580 - Maintenance Trades Helper 15.44 23591 - Metrology Technician I 23.88 23592 - Metrology Technician II 25.04 23593 - Metrology Technician III 26.20 23640 - Millwright 24.90 23710 - Office Appliance Repairer 22.68 23760 - Painter Maintenance 21.10 23790 - Pipefitter Maintenance 23.94 23810 - Plumber Maintenance 22.87 23820 - Pneudraulic Systems Mechanic 23.88 23850 - Rigger 23.88 23870 - Scale Mechanic 21.54 23890 - Sheet-Metal Worker Maintenance 18.43 23910 - Small Engine Mechanic 18.95 23931 - Telecommunications Mechanic I 26.27 23932 - Telecommunications Mechanic II 27.54 23950 - Telephone Lineman 23.88 23960 - Welder Combination Maintenance 20.44 23965 - Well Driller 23.88 23970 - Woodcraft Worker 23.88 23980 - Woodworker 19.15 24000 - Personal Needs Occupations 24550 - Case Manager 17.18 24570 - Child Care Attendant 10.56*** 24580 - Child Care Center Clerk 13.19*** 24610 - Chore Aide 10.88*** 24620 - Family Readiness And Support Services 17.18 Coordinator 24630 - Homemaker 17.18 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 23.88 25040 - Sewage Plant Operator 18.21 25070 - Stationary Engineer 23.88 25190 - Ventilation Equipment Tender 17.91 25210 - Water Treatment Plant Operator 18.21 27000 - Protective Service Occupations 27004 - Alarm Monitor 15.82 27007 - Baggage Inspector 15.44 27008 - Corrections Officer 17.76

27010 - Court Security Officer 18.30 27030 - Detection Dog Handler 17.27 27040 - Detention Officer 17.76 27070 - Firefighter 17.58 27101 - Guard I 15.44 27102 - Guard II 17.27 27131 - Police Officer I 19.57 27132 - Police Officer II 21.75 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 14.81*** 28042 - Carnival Equipment Repairer 15.84 28043 - Carnival Worker 11.42*** 28210 - Gate Attendant/Gate Tender 17.67 28310 - Lifeguard 11.34*** 28350 - Park Attendant (Aide) 19.77 28510 - Recreation Aide/Health Facility Attendant 14.43*** 28515 - Recreation Specialist 23.82 28630 - Sports Official 15.74 28690 - Swimming Pool Operator 18.42 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 24.40 29020 - Hatch Tender 24.40 29030 - Line Handler 24.40 29041 - Stevedore I 23.10 29042 - Stevedore II 25.70 30000 - Technical Occupations 30010 - Air Traffic Control Specialist Center (HFO) (see 2) 41.27 30011 - Air Traffic Control Specialist Station (HFO) (see 2) 28.46 30012 - Air Traffic Control Specialist Terminal (HFO) (see 2) 31.33 30021 - Archeological Technician I 18.24 30022 - Archeological Technician II 20.41 30023 - Archeological Technician III 25.28 30030 - Cartographic Technician 25.28 30040 - Civil Engineering Technician 23.03 30051 - Cryogenic Technician I 28.00 30052 - Cryogenic Technician II 30.93 30061 - Drafter/CAD Operator I 18.24 30062 - Drafter/CAD Operator II 20.41 30063 - Drafter/CAD Operator III 22.75 30064 - Drafter/CAD Operator IV 28.00 30081 - Engineering Technician I 16.25 30082 - Engineering Technician II 18.24 30083 - Engineering Technician III 20.41 30084 - Engineering Technician IV 25.28 30085 - Engineering Technician V 30.93 30086 - Engineering Technician VI 37.42 30090 - Environmental Technician 25.28 30095 - Evidence Control Specialist 25.28 30210 - Laboratory Technician 24.03 30221 - Latent Fingerprint Technician I 28.00 30222 - Latent Fingerprint Technician II 30.93 30240 - Mathematical Technician 25.28 30361 - Paralegal/Legal Assistant I 19.94 30362 - Paralegal/Legal Assistant II 24.70 30363 - Paralegal/Legal Assistant III 28.99 30364 - Paralegal/Legal Assistant IV 36.57 30375 - Petroleum Supply Specialist 30.93 30390 - Photo-Optics Technician 25.28 30395 - Radiation Control Technician 30.93 30461 - Technical Writer I 25.28 30462 - Technical Writer II 30.93 30463 - Technical Writer III 37.42

30491 - Unexploded Ordnance (UXO) Technician I 26.22 30492 - Unexploded Ordnance (UXO) Technician II 31.73 30493 - Unexploded Ordnance (UXO) Technician III 38.03 30494 - Unexploded (UXO) Safety Escort 26.22 30495 - Unexploded (UXO) Sweep Personnel 26.22 30501 - Weather Forecaster I 28.00 30502 - Weather Forecaster II 34.06 30620 - Weather Observer Combined Upper Air Or (see 2) 22.75 Surface Programs 30621 - Weather Observer Senior (see 2) 25.28 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 31.73 31020 - Bus Aide 13.26*** 31030 - Bus Driver 19.16 31043 - Driver Courier 15.51 31260 - Parking and Lot Attendant 12.00*** 31290 - Shuttle Bus Driver 15.28 31310 - Taxi Driver 13.55*** 31361 - Truckdriver Light 16.58 31362 - Truckdriver Medium 17.57 31363 - Truckdriver Heavy 22.37 31364 - Truckdriver Tractor-Trailer 22.37 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 15.47 99030 - Cashier 10.39*** 99050 - Desk Clerk 12.85*** 99095 - Embalmer 30.75 99130 - Flight Follower 26.22 99251 - Laboratory Animal Caretaker I 13.50*** 99252 - Laboratory Animal Caretaker II 14.43*** 99260 - Marketing Analyst 24.99 99310 - Mortician 30.75 99410 - Pest Controller 17.72 99510 - Photofinishing Worker 13.78*** 99710 - Recycling Laborer 15.01 99711 - Recycling Specialist 17.64 99730 - Refuse Collector 13.59*** 99810 - Sales Clerk 13.08*** 99820 - School Crossing Guard 15.22 99830 - Survey Party Chief 19.89 99831 - Surveying Aide 12.97*** 99832 - Surveying Technician 17.84 99840 - Vending Machine Attendant 19.75 99841 - Vending Machine Repairer 23.77 99842 - Vending Machine Repairer Helper 19.75

***Workers in this classification may be entitled to a higher minimum wage under Executive Order 14026 ($15.00 per hour) or 13658 ($11.25 per hour). Please see the Note at the top of the wage determination for more information. Please also note that the minimum wage requirements of Executive Order 14026 and 13658 are not currently being enforced as to contracts or contract-like instruments entered into with the federal government in connection with seasonal recreational services or seasonal recreational equipment rental for the general public on federal lands.

Note: Executive Order (EO) 13706 Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2017. If this contract is covered by the EO the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness injury or other health-related needs including preventive care; to assist a family member (or person who is like family to the employee) who is ill injured or has other health-related needs including preventive care; or for reasons resulting from or to assist a family member (or person who is like family to the employee) who is the victim of domestic violence sexual assault or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.80 per hour up to 40 hours per week or $192.00 per week or $832.00 per month

HEALTH & WELFARE EO 13706: $4.41 per hour up to 40 hours per week or $176.40 per week or $764.40 per month*

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706 Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor 3 weeks after 8 years and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor wherever employed and with the predecessor contractors in the performance of similar work at the same Federal facility. (See 29 CFR 4.173)

HOLIDAYS: A minimum of eleven paid holidays per year: New Year's Day Martin Luther King Jr.'s Birthday Washington's Birthday Memorial Day Juneteenth National Independence Day Independence Day Labor Day Columbus Day Veterans' Day Thanksgiving Day and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: This wage determination does not apply to any individual employed in a bona fide executive administrative or professional capacity as defined in 29 C.F.R. Part 541. (See 41 C.F.R. 6701(3)). Because most Computer Systems Analysts and Computer Programmers who are paid at least $27.63 per hour (or at least $684 per week if paid on a salary or fee basis) likely qualify as exempt computer professionals under 29 U.S.C. 213(a)(1) and 29 U.S.C. 213(a)(17) this wage determination may not include wage rates for all occupations within those job families. In such instances a conformance will be necessary if there are nonexempt employees in these job families working on the contract.

Job titles vary widely and change quickly in the computer industry and are not determinative of whether an employee is an exempt computer professional. To be exempt computer employees who satisfy the compensation requirements must also have a primary duty that consists of:

(1) The application of systems analysis techniques and procedures including consulting with users to determine hardware software or system functional specifications;

(2) The design development documentation analysis creation testing or modification of computer systems or programs including prototypes based on and related to user or system design specifications;

(3) The design documentation testing creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties the performance of which requires the same level of skills. (29 C.F.R. 541.400).

Any computer employee who meets the applicable compensation requirements and the above duties test qualifies as an exempt computer professional under both section 13(a)(1) and section 13(a)(17) of the Fair Labor Standards Act. (Field Assistance Bulletin No. 2006-3 (Dec. 14 2006)). Accordingly this wage determination will not apply to any exempt computer employee regardless of which of these two exemptions is utilized.

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance explosives and incendiary materials.