Solicitation - W50S9326QA007.pdf

(See ).

SOLICITATION, OFFER,

AND AWARD

(Construction, Alteration, or Repair) IMPORTANT - The "offer" section on the reverse must be fully completed by offeror.

9. FOR

INFORMATION CALL:

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid and "bidder".

SOLICITATION

1. SOLICITATION NUMBER

5. REQUISITION/PURCHASE REQUEST NUMBER

CODE

6. PROJECT NUMBER

8. ADDRESS OFFER TO

4. CONTRACT NUMBER

7. ISSUED BY

10. THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS (Title, identifying number, date)

11. The contractor shall begin performance within

12a. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE AND PAYMENT BONDS?

(If "YES", indicate within how many calendar days after award in Item 12b.)

13. ADDITIONAL SOLICITATION REQUIREMENTS:

a. Sealed offers in original and

b. An offer guarantee

c. All offers are subject to the (1) work requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

d. Offers providing less than

STANDARD FORM 1442 (REV. 12/2022)

Prescribed by GSA - FAR (48 CFR) 53.236-1(d) calendar days for Government acceptance after the date offers are due will not be considered and will be rejected.

is, is not required.

local time containing offers shall be marked to show the offeror's name and address, the solicitation number, and the date and time offers are due.

(date). If this is a sealed bid solicitation, offers will be publicly opened at that time. Sealed envelopes copies to perform the work required are due at the place specified in Item 8 by (hour) award, YES NO notice to proceed. This performance period is mandatory negotiable.

calendar days and complete it within calendar days after receiving

a. NAME b. TELEPHONE NUMBER (Include area code) (NO COLLECT CALLS)

12b. CALENDAR DAYS

2. TYPE OF SOLICITATION

SEALED BID (IFB)

INVITATION FOR BID

NEGOTIATED (RFP)

REQUEST FOR PROPOSAL

3. DATE ISSUED PAGE OF PAGES

AWARD (To be completed by Government)

17. The offeror agrees to perform the work required at the prices specified below in strict accordance with the terms of this solicitation, if this offer is accepted calendar days after the date offers are due. (Insert any number equal to or greater than the minimum requirement by the Government in writing within stated in Item 13d. Failure to insert any number means the offeror accepts the minimum in Item 13d.)

OFFER (Must be fully completed by offeror)

AMOUNTS

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the solicitation -- give number and date of each)

AMENDMENT

NUMBER

DATE

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

14. NAME AND ADDRESS OF OFFEROR (Include ZIP Code)

CODE FACILITY CODE

15. TELEPHONE NUMBER (Include area code)

16. REMITTANCE ADDRESS (Include only if different than Item 14.)

20a. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN OFFER (Type or print)

21. ITEMS ACCEPTED:

22. AMOUNT

26. ADMINISTERED BY

30a. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED TO SIGN (Type or print)

31c. DATE

STANDARD FORM 1442 (REV. 12/2022) BACK

31b. UNITED STATES OF AMERICA

BY

31a. NAME OF CONTRACTING OFFICER (Type or print)

29. AWARD (Contractor is not required to sign this document.) Your offer on this solicitation is hereby accepted as to the items listed. This award consummates the contract, which consists of (a) the Government solicitation and your offer, and (b) this contract award. No further contractual document is necessary.

30b. SIGNATURE 30c. DATE

28. NEGOTIATED AGREEMENT (Contractor is required to sign this document and return and deliver all items or perform all work requirements identified on this form and any continuation sheets for the consideration stated in this contract. The rights and obligations of the parties to this contract shall be governed by (a) this contract award, (b) the solicitation, and (c) the clauses, representations, certifications, and specifications incorporated by reference in or attached to this contract.

copies to issuing office.) Contractor agrees to furnish

24. SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified)

23. ACCOUNTING AND APPROPRIATION DATA

ITEM

25. OTHER THAN FULL AND OPEN COMPETITION PURSUANT TO THE UNITED STATES

CODE AT

27. PAYMENT WILL BE MADE BY

10 U.S.C. 3204(a) ( ) 41 U.S.C. 3304(a) ( )

20b. SIGNATURE 20c. OFFER DATE

Section A - Solicitation/Contract Form

Bldg.19 HVAC Ductwork Insulation RepairInstrument Name:

Product Service Code : J041

W50S9326QA007

Section B - Supplies or Services & Prices or Costs

Additional Information/Notes

Item Supplies/Service Quantity Unit Unit Price

Amount

0001 The Contractor shall provide supervision, transportation, labor, materials, equipment, fuel and any other needed materials and Quality Control (QC) necessary, except as specified in Paragraph 3.0 as Government Furnished items, to replace HVAC insulation at 2nd floor BLDG 19, located in Muniz ANGB in Carolina, PR as specified in this Statement of Work (SOW) and diagrams /drawings contained in this solicitation.

Product Type Code: J041 Product Service Code: J041 North American Industry Classification System (NAICS): 238220 Claimant Program Code: C2 Pricing Arrangement: Firm Fixed Price

1 Job

Section C - Description/Specifications/Statement of Work

Requirements To perform work to include the replacement of degraded thermal insulation on the existing HVAC ductwork by flexible wrap-around duct insulation, to maintain energy efficiency, prevent condensation, and ensure optimal climate control for mission operations. for Bldg 19 (Muniz)

Section E - Inspection and Acceptance

Overall Contract Inspection/Acceptance Locations

0001 Inspection and Acceptance Location

Both Other Instructions: For all inspection and payment inquiries, ensure to obtain clearance of requests prior to submit them through the system to the POC representative listed here, others will not be considered.

DoDAAC: F8C3CE CountryCode: PRI

156 AW CES

AF BPN NO MILSBILLS PROCESSES, 200 JOSE A TONY SANTANA AVE BLD 25

MUNIZ ANGB CAROLINA 00979-1502

PUERTO RICO

MISAEL CORTIJO CRUZ, Capt

Section F - Deliveries or Performance

0001 Delivery Schedule From date of lead time event to completion of performance 60 Calendar Days

Date of Notice to Proceed Receipt 1 JobQuantity

Address and POC Ship To DoDAAC: F8C3CE CountryCode: PRI

156 AW CES

AF BPN NO MILSBILLS PROCESSES, 200 JOSE A TONY SANTANA AVE BLD 25

MUNIZ ANGB CAROLINA 00979-1502 PUERTO RICO

MISAEL CORTIJO CRUZ, Capt

Section G - Contract Administration Data

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate Deviation

Variation Effective Date

252.201-7000 Contracting Officer's Representative.

1991-12

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports.

2018-12

252.236-7000 Modification Proposals--Price Breakdown.

1991-12

DFARS Clauses Incorporated by Full Text

Number Title Effective Date

Alternate Deviation

Variation Effective Date

252.232-7006 Wide Area WorkFlow Payment Instructions. (Tailored)

2023-01

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) Definitions. As used in this clause--

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall--

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.

sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall use the following document type(s).

Construction Payment Invoice

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

F8C3CE

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC F87700

Issue By DoDAAC W50S93

Admin DoDAAC W50S93

Inspect By DoDAAC F8C3CE

Ship To Code F8C3CE

Ship From Code Not Applicable

Mark For Code F8C3CE

Service Approver (DoDAAC) Not Applicable

Service Acceptor (DoDAAC) F8C3CE

Accept at Other DoDAAC Not Applicable

LPO DoDAAC Not Applicable

DCAA Auditor DoDAAC Not Applicable

Other DoDAAC(s) Not Applicable

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) WAWF email notifications. The Contractor shall enter the email address identified below in the "Send Additional Email Notifications" field of WAWF once a document is submitted in the system.

Contractor: WAWF will prompt asking for "additional e-mail submissions" after clicking "SIGNATURE"

The following E-Mail addresses MUST be input in order to prevent delays in processing:

Inspector/Budget Analyst email: misael.cortijo_cruz@us.af.mil ,alberto.santini.1@us.af.mil ismael.rodriguez_rivera.1@us.af.mil , 156.WG.ALO@us.af.mil

Contracting Officer: rolando.perez.9@us.af.mil

The paying office DoDAAC and mailing address can be located on front of your award. You can easily track your payment information on the DFAS web site at https://myinvoice.csd.disa.

mil//index.html. Your purchase order/contract number or invoice will be required to inquire status of your payment.

(g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

Angel F. Solis/Contract Specialist angel.solis.2@us.af.mil

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

(End of clause) mailto:misael.cortijo_cruz@us.af.mil mailto:ismael.rodriguez_rivera.1@us.af.mil mailto:ismael.rodriguez_rivera.1@us.af.mil mailto:156.WG.ALO@us.af.mil mailto:rolando.perez.9@us.af.mil mailto:angel.solis.2@us.af.mil

Section I - Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate Deviation

Variation Effective Date

52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements.

2017-01

52.204-13 System for Award Management- Maintenance. (Deviation 2026- O0038)

2026-02

52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (Deviation 2026- O0038)

2026-02

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations.

(Deviation 2026-O0038)

2026-02

52.212-4 Terms and Conditions- Commercial Products and Commercial Services. (Deviation 2026-O0038)

2026-02

52.219-6 Notice of Total Small Business Set-Aside. (Deviation 2026- O0038)

2026-02

52.222-3 Convict Labor. (Deviation 2026- O0038)

2026-02

52.222-6 Construction Wage Rate Requirements. (Deviation 2026- O0038)

2026-02

52.222-7 Withholding of Funds. (Deviation 2026-O0038)

2026-02

52.222-8 Payrolls and Basic Records.

(Deviation 2026-O0038)

2026-02

52.222-9 Apprentices and Trainees.

(Deviation 2026-O0038)

2026-02

52.222-10 Compliance with Copeland Act Requirements. (Deviation 2026- O0038)

2026-02

52.222-11 Subcontracts (Labor Standards).

(Deviation 2026-O0038)

2026-02

52.222-12 Contract Termination-Debarment. 2014-05

52.222-13 Compliance with Construction Wage Rate Requirements and Related Regulations.

2014-05

52.222-14 Disputes Concerning Labor Standards. (Deviation 2026- O0038)

2026-02

52.222-15 Certification of Eligibility. 2014-05

52.222-19 Child Labor-Cooperation with Authorities and Remedies.

(Deviation 2026-O0038)

2026-03

52.222-36 Equal Opportunity for Workers with Disabilities. (Deviation 2026- O0038)

2026-02

52.222-50 Combating Trafficking in Persons. (Deviation 2026-O0038)

2026-02

52.222-90 Addressing DEI Discrimination by Federal Contractors.

(Deviation 2026-O0040, Revision 1)

2026-04

52.223-5 Pollution Prevention and Right-to- Know Information.

2024-05

52.225-3 Buy American-Free Trade Agreements-Israeli Trade Act.

(Deviation 2026-O0038)

2026-02

52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving.

2024-05

52.228-2 Additional Bond Security. 1997-10

52.228-5 Insurance-Work on a Government Installation.

1997-01

52.228-11 Individual Surety-Pledge of Assets.

2021-02

52.228-12 Prospective Subcontractor Requests for Bonds.

2022-12

52.228-14 Irrevocable Letter of Credit. 2014-11

52.229-12 Tax on Certain Foreign Procurements. (Deviation 2026- O0038)

2021-02

52.232-27 Prompt Payment for Construction Contracts.

2017-01

52.232-33 Payment by Electronic Funds 2018-10

Transfer-System for Award Management.

52.232-40 Providing Accelerated Payments to Small Business Subcontractors.

2023-03

52.233-3 Protest after Award. (Deviation 2026-O0038)

2026-02

52.233-4 Applicable Law for Breach of Contract Claim. (Deviation 2026- O0038)

2026-02

52.236-2 Differing Site Conditions.

(Deviation 2026-O0038)

2026-02

52.236-3 Site Investigation and Conditions Affecting the Work. (Deviation 2026-O0038)

2026-02

52.236-5 Material and Workmanship.

(Deviation 2026-O0038)

2026-02

52.236-6 Superintendence by the Contractor. (Deviation 2026- O0038)

2026-02

52.236-9 Protection of Existing Vegetation, Structures, Equipment, Utilities, and Improvements. (Deviation 2026-O0038)

2026-02

52.236-10 Operations and Storage Areas.

(Deviation 2026-O0038)

2026-02

52.236-11 Use and Possession Prior to Completion. (Deviation 2026- O0038)

2026-02

52.236-12 Cleaning Up. (Deviation 2026- O0038)

2026-02

52.236-14 Availability and Use of Utility Services. (Deviation 2026-O0038)

2026-02

52.240-91 Security Prohibitions and Exclusions. (Deviation 2026- O0038)

2026-02

52.244-6 Subcontracts for Commercial Products and Commercial Services. (Deviation 2026-O0038)

2026-04

DFARS Clauses Incorporated by Reference

Date

Alternate Deviation

Variation Effective Date

252.203-7000 Requirements Relating to Compensation of Former DoD Officials.

2011-09

252.203-7002 Requirement to Inform Employees of Whistleblower Rights.

2022-12

252.204-7004 Antiterrorism Awareness Training for Contractors.

2023-01

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting. (DEVIATION 2024-

O0013 REVISION 1)

2024-05 Deviation 2024- O0013

2024-05

252.204-7018 Prohibition on the Acquisition of Covered Defense

2023-01

Telecommunications Equipment or Services.

252.223-7008 Prohibition of Hexavalent Chromium.

2023-01

252.225-7048 Export-Controlled Items. 2013-06

252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime.

2023-01

252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region.

2023-06

252.232-7010 Levies on Contract Payments. 2006-12

252.236-7005 Airfield Safety Precautions. 1991-12

252.246-7004 Safety of Facilities, Infrastructure, and Equipment for Military Operations.

2010-10

252.247-7023 Transportation of Supplies by Sea.

2024-10

DFARS Clauses Incorporated by Full Text

Date

Alternate Deviation

Variation Effective Date

252.236-7001 Contract Drawings and Specifications. (Tailored)

2000-08

CONTRACT DRAWINGS AND SPECIFICATIONS (AUG 2000)

(a) The Government will provide to the Contractor, without charge, one set of contract drawings and specifications, except publications incorporated into the technical provisions by reference, in electronic or paper media as chosen by the Contracting Officer.

(b) The Contractor shall-

(1) Check all drawings furnished immediately upon receipt;

(2) Compare all drawings and verify the figures before laying out the work;

(3) Promptly notify the Contracting Officer of any discrepancies;

(4) Be responsible for any errors that might have been avoided by complying with this paragraph (b); and

(5) Reproduce and print contract drawings and specifications as needed.

(c) In general--

(1) Large-scale drawings shall govern small-scale drawings; and

(2) The Contractor shall follow figures marked on drawings in preference to scale measurements.

(d) Omissions from the drawings or specifications or the misdescription of details of work that are manifestly necessary to carry out the intent of the drawings and specifications, or that are customarily performed, shall not relieve the Contractor from performing such omitted or misdescribed details of the work. The Contractor shall perform such details as if fully and correctly set forth and described in the drawings and specifications.

(e) The work shall conform to the specifications and the contract drawings identified on the following index of drawings:

Title File

TUMR 262112 RPR BLDG 19 2nd Floor HVAC ductwork Layout

SOW TUMR 262112 RPR BLDG 19

HVAC ductwork Insulation Ver 1.0

(End of clause)

Section J - List of Attachments

"The attachments listed in this Section are incorporated by reference and made part of this contract with the same force and effect as if included in full text."

*** END OF NARRATIVE ***

Identifier Document Name

Document Description

Reference Identifier

Date Line Item

Page Numbers

Document Type

Provided Under Separate Cover

0001 WDPR202600

Wage Determination

General Decision Number: P R2026000 1 05/18 /2026

Jun

1 Attachment No

0002 SOW TUMR 2

62112 RPR

BLDG 19 HV

AC ductwor k Insulati on Ver 1.0

Statement of Work 30 Jun

26 Attachment No

Section K - Representations, Certification, & Other Statements

FAR Provisions Incorporated by Reference

Number Title Effective Date

Alternate Deviation

Variation Effective Date

52.223-4 Recovered Material Certification. 2008-05

52.240-90 Security Prohibitions and Exclusions Representations and Certifications. (Deviation 2026-

2026-02

DFARS Provisions Incorporated by Reference

Date

Alternate Deviation

Variation Effective Date

252.203-7005 Representation Relating to Compensation of Former DoD Officials.

2022-09

252.204-7008 Compliance with Safeguarding Covered Defense Information Controls.

2016-10

252.225-7055 Representation Regarding Business Operations with the Maduro Regime.

2022-05

252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region- Representation.

2023-06

FAR Provisions Incorporated by Full Text

Date

Alternate Deviation

Variation Effective Date

52.225-4 Buy American-Free Trade Agreements-Israeli Trade Act Certificate. (Deviation 2026-

Buy American-Free Trade Agreements-Israeli Trade Act Certificate (Feb 2026) (Deviation 2026-

(a)

(1) The Offeror certifies that each end product, except those listed in paragraph (b) or (c)(1) of this provision, is a domestic end product and that each domestic end product listed in paragraph (c)(2) of this provision contains a critical component.

(2) The terms "Bahraini, Moroccan, Omani, Panamanian, or Peruvian end product," "commercially available off-the-shelf (COTS) item," "critical component," "domestic end product," "end product," "foreign end product," "Free Trade Agreement country," "Free Trade Agreement country end product," "Israeli end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act."

(b) The Offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahraini, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act":

Free Trade Agreement Country End Products (Other than Bahraini, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:

Line item No. Country of origin

[List as necessary]

(c)

(1) The Offeror shall list those supplies that are foreign end products (other than those listed in paragraph (b) of this provision) as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act."

Other Foreign End Products:

Line Item No. Country of origin [List as necessary]

(2) The Offeror shall list the line item numbers of domestic end products that contain a critical component (see FAR 25.105).

Line Item No. ____

[List as necessary]

(d) The Government will evaluate offers in accordance with the policies and procedures of part 25 of the Federal Acquisition Regulation.

(End of provision)

52.229-11 Tax on Certain Foreign 2020-06

Procurements-Notice and Representation.

Tax on Certain Foreign Procurements-Notice and Representation (Jun 2020)

(a) Definitions. As used in this provision-

Foreign person means any person other than a United States person.

Specified Federal procurement payment means any payment made pursuant to a contract with a foreign contracting party that is for goods, manufactured or produced, or services provided in a foreign country that is not a party to an international procurement agreement with the United States. For purposes of the prior sentence, a foreign country does not include an outlying area of the United States.

United States person as defined in 26 U.S.C. 7701(a)(30) means

(1) A citizen or resident of the United States;

(2) A domestic partnership;

(3) A domestic corporation;

(4) Any estate (other than a foreign estate, within the meaning of 26 U.S.C. 701(a)(31)); and

(5) Any trust if-

(i) A court within the United States is able to exercise primary supervision over the administration of the trust; and

(ii) One or more United States persons have the authority to control all substantial decisions of the trust.

(b) Unless exempted, there is a 2 percent tax of the amount of a specified Federal procurement payment on any foreign person receiving such payment. See 26 U.S.C. 5000C and its implementing regulations at 26 CFR 1.5000C-1 through 1.5000C-7.

(c) Exemptions from withholding under this provision are described at 26 CFR 1.5000C-1(d)(5) through (7). The Offeror may claim an exemption from the withholding by using the Department of the Treasury Internal Revenue Service (IRS) Form W-14, Certificate of Foreign Contracting Party Receiving Federal Procurement Payments, available at www.irs.gov/w14. Any exemption claimed and self-certified on the IRS Form W-14 is subject to audit by the IRS. Any disputes regarding the imposition and collection of the 26 U.S.C. 5000C tax are adjudicated by the IRS as the 26 U.S.C. 5000C tax is a tax matter, not a contract issue. The IRS Form W-14 is provided to the acquiring agency rather than to the IRS.

(d) For purposes of withholding under 26 U.S.C. 5000C, the Offeror represents that

(1) It [ ] is [ ] is not a foreign person; and

(2) If the Offeror indicates "is" in paragraph (d)(1) of this provision, then the Offeror represents that-I am claiming on the IRS Form W-14 [ ] a full exemption, or [ ] partial or no exemption [Offeror must select one] from the excise tax.

(e) If the Offeror represents it is a foreign person in paragraph (d)(1) of this provision, then-

(1) The clause at FAR 52.229-12, Tax on Certain Foreign Procurements, will be included in any resulting contract; and

(2) The Offeror shall submit with its offer the IRS Form W-14. If the IRS Form W-14 is not submitted with the offer, exemptions will not be applied to any resulting contract and the Government will withhold a full 2 percent of each payment.

(f) If the Offeror selects "is" in paragraph (d)(1) and "partial or no exemption" in paragraph (d)(2) of this provision, the Offeror will be subject to withholding in accordance with the clause at FAR 52.229-12, Tax on Certain Foreign Procurements, in any resulting contract.

(g) A taxpayer may, for a fee, seek advice from the IRS as to the proper tax treatment of a transaction. This is called a private letter ruling. Also, the IRS may publish a revenue ruling, which is an official interpretation by the IRS of the Internal Revenue Code, related statutes, tax treaties, and regulations. A revenue ruling is the conclusion of the IRS on how the law is applied to a specific set of facts. For questions relating to the interpretation of the IRS regulations go to https://www.irs.gov/help/tax-law-questions.

(End of provision)

DFARS Provisions Incorporated by Full Text

Date

Alternate Deviation

Variation Effective Date

252.204-7016 Covered Defense Telecommunications Equipment or Services-Representation.

2019-12

COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES-

REPRESENTATION (DEC 2019)

(a) Definitions. As used in this provision, "covered defense telecommunications equipment or services" has the meaning provided in the clause 252.204-7018, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

(b) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for "covered defense telecommunications equipment or services".

(c) Representation. The Offeror represents that it [ ] does, [ ] does not provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument.

252.204-7017 Prohibition on the Acquisition of 2021-05

Covered Defense Telecommunications Equipment or Services-Representation.

PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS

EQUIPMENT OR SERVICES-REPRESENTATION (MAY 2021)

The Offeror is not required to complete the representation in this provision if the Offeror has represented in the provision at 252.204-7016, Covered Defense Telecommunications Equipment or Services-Representation, that it "does not provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument."

(a) Definitions. "Covered defense telecommunications equipment or services," "covered mission," "critical technology," and "substantial or essential component," as used in this provision, have the meanings given in the 252.204-7018 clause, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services, of this solicitation.

(b) Prohibition. Section 1656 of the National Defense Authorization Act for Fiscal Year 2018 (Pub. L. 115-91) prohibits agencies from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) at https://www.sam.gov for entities that are excluded when providing any equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless a waiver is granted.

(d) Representation. If in its annual representations and certifications in SAM the Offeror has represented in paragraph (c) of the provision at 252.204-7016, Covered Defense Telecommunications Equipment or Services-Representation, that it "does" provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument, then the Offeror shall complete the following additional representation:

The Offeror represents that it [ ] will [ ] will not provide covered defense telecommunications equipment or services as a part of its offered products or services to DoD in the performance of any award resulting from this solicitation.

(e) Disclosures. If the Offeror has represented in paragraph (d) of this provision that it "will provide covered defense telecommunications equipment or services," the Offeror shall provide the following information as part of the offer:

(1) A description of all covered defense telecommunications equipment and services offered (include brand or manufacturer; product, such as model number, original equipment manufacturer (OEM) number, manufacturer part number, or wholesaler number; and item description, as applicable).

(2) An explanation of the proposed use of covered defense telecommunications equipment and services and any factors relevant to determining if such use would be permissible under the prohibition referenced in paragraph (b) of this provision.

(3) For services, the entity providing the covered defense telecommunications services (include entity name, unique entity identifier, and Commercial and Government Entity (CAGE) code, if known).

(4) For equipment, the entity that produced or provided the covered defense telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known).

Section L - Instructions, Conditions, & Notices to Offerors or Quoters

Addendum to RFO FAR 52.212-1

Instructions to Offerors - Commercial Products and Services

(a) Instructions:

(1) Quote Submission and Documentation Requirements

Submission Deadline: Submit all quotes to the office specified in this solicitation at or before the exact date and time specified in Block 13 of the Standard Form (SF) 1442.

Standard Form 1442: Submissions must include a completed SF 1442. Offerors must complete Blocks 14, 15, 17, 18, and 20a-c, as well as Block 16 if applicable. If the solicitation is amended after its original posting, offerors must acknowledge all amendments by either completing Block 19 on the SF 1442 or completing Blocks 15A-C on each Standard Form 30 (SF 30).

Pricing and Contract Line Item Numbers (CLINs): Offerors shall submit a Firm-Fixed-Price (FFP) proposal structured by the individual CLINs identified in the solicitation's schedule. Each CLIN must be priced independently, and pricing must not be contingent upon the award of any other CLINs. The Government reserves the right to award any combination of CLINs (including a single CLIN or no CLINs at all) and is under no obligation to award all CLINs listed. Each independent CLIN price must comprehensively include all labor, materials, equipment, and services necessary to perform the work specified in the Statement of Work (SOW) and any corresponding attachments.

Provisions and Clauses: Offerors must complete and return all applicable fill-in provisions and clauses contained within the solicitation.

Resource Estimate: Offerors must submit a comprehensive list of the equipment, materials, and labor disciplines required to accomplish the scope of work outlined in the SOW. While an RSMeans output is an example of a specialized program that can generate this information, its use is not mandatory. Offerors may instead submit a simple list, such as a Microsoft Word document, provided it contains sufficient detail to demonstrate an adequate understanding of the specific means and methods necessary to successfully complete all solicitation requirements.

Project Schedule: Offerors must submit a realistic project schedule demonstrating how the project will be successfully completed. If Block 11 of the SF 1442 indicates that the schedule is negotiable, the submitted schedule must clearly indicate the offeror's proposed timeline as their official position. This schedule must detail the planned sequence of activities, identify key milestones, and clearly align with the performance objectives in the SOW to ensure completion within the established (or proposed) Period of Performance (PoP).

(2) Submission Method: Quotes must be submitted electronically via email to angel.solis.2@us.af.

. Submissions must be received by the Government at or before the exact date and time mil

W50S9326QA007

specified in the solicitation. The email subject line must strictly read: Solicitation Number - .Quote- Company Name

(3) Requests for Information (RFIs): RFIs must be submitted in writing via email to angel.

. The email subject line must strictly read: solis.2@us.af.mil Insert Solicitation Number - RFI - . Company Name RFIs will not be accepted after the date and time stated on the unless a response is deemed to be in the best interests of the solicitation (SAM.gov) notice, Government.

(4) Insurance Requirements: In accordance with Clause 52.228-5, the awardee/contractor shall provide and maintain, during the entire performance of this contract, at least the kinds and minimum amounts of insurance identified below:

Insurance Type

Minimum Limit

Workmen's Compensation

$100,000*

Comprehensive General Liability

$500,000 per occurrence (Bodily Injury)

Comprehensive Automobile Liability

$200,000 per person /

20,000 per accident (Property Damage)

W50S9326QA007

*Except in states with exclusive or monopolistic funds that do not permit worker's compensation to be written by private carriers.

End Addendum to RFO FAR 52.212-1

*** END OF NARRATIVE ***

*** END OF NARRATIVE ***

FAR Provisions Incorporated by Reference

Number Title Effective Date

Alternate Deviation

Variation Effective Date

52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements- Representation.

2017-01

52.204-7 System for Award Management- Registration. (Deviation 2026- O0038)

2026-02

52.212-1 Instructions to Offerors- Commercial Products and Commercial Services. (Deviation 2026-O0038)

2026-02

52.214-12 Preparation of Bids. 1984-04

52.214-34 Submission of Offers in the English Language.

1991-04

52.214-35 Submission of Offers in U.S.

Currency.

1991-04

52.222-5 Construction Wage Rate Requirements-Secondary Site of the Work. (Deviation 2026-

DFARS Provisions Incorporated by Reference

Date

Alternate Deviation

Variation Effective Date

252.204-7019 Notice of NIST SP 800-171 DoD Assessment Requirements.

2023-11

252.204-7024 Notice on the Use of the Supplier Performance Risk System.

2023-03

FAR Provisions Incorporated by Full Text

Date

Alternate Deviation

Variation Effective Date

52.219-4 Notice of Price Evaluation Preference for HUBZone Small Business Concerns. (Deviation 2026-O0038)

2026-02

Notice of Price Evaluation preference for HUBZone Small Business Concerns (Feb 2026) (Deviation 2026-O0038)

(a) Evaluation preference.

(1) Offers will be evaluated by adding a factor of 10 percent to the price of all offers, except-

(i) Offers from HUBZone small business concerns that have not waived the evaluation preference; and

(ii) Otherwise successful offers from small business concerns.

(b) Waiver of evaluation preference. A HUBZone small business concern may choose to waive the evaluation preference. If the concern waives the preference, the factor will be added to its offer for evaluation purposes.

[ ] Offeror chooses to waive the evaluation preference.

(c) Joint venture. A HUBZone joint venture agrees that, in the performance of the contract, at least 40 percent of the aggregate work performed by the joint venture shall be completed by the HUBZone small business parties to the joint venture. Work performed by the HUBZone small business parties to the joint venture must be more than administrative functions.

DFARS Provisions Incorporated by Full Text

Date

Alternate Deviation

Variation Effective Date

252.215-7992 Only One Offer. (DEVIATION 2026-03 Deviation 2026-03

2026-O0048) 2026- O0048

ONLY ONE OFFER (DEVIATION 2026-O0048) (MAR 2026)

(a) Cost or pricing data requirements. After initial submission of offers, if the Contracting Officer notifies the Offeror that only one offer was received, the Offeror agrees to--

(1) Submit any additional cost or pricing data that is required in order to determine whether the price is fair and reasonable (10 U.S.C. 3705) or to comply with the statutory requirement for certified cost or pricing data (10 U.S.C. 3702); and

(2) Except as provided in paragraph (b) of this provision, if the acquisition exceeds the certified cost or pricing data threshold and an exception to the requirement for certified cost or pricing data at FAR 15.403-2(b)(2) through (5) does not apply, certify all cost or pricing data in accordance with paragraph (c) of DFARS provision 252.215-7994, Requirements for Certified Cost or Pricing Data and Data Other Than Certified Cost or Pricing Data, of this solicitation.

(b) Canadian Commercial Corporation. If the Offeror is the Canadian Commercial Corporation, certified cost or pricing data are not required. If the Contracting Officer notifies the Canadian Commercial Corporation that additional data other than certified cost or pricing data are required in accordance with DFARS 225.870-4(c), the Canadian Commercial Corporation shall obtain and provide the following:

(1) Profit rate or fee (as applicable).

(2) Analysis provided by Public Works and Government Services Canada to the Canadian Commercial Corporation to determine a fair and reasonable price (comparable to the analysis required at 15.404).

(3) Data other than certified cost or pricing data necessary to permit a determination by the U.

S. Contracting Officer that the proposed price is fair and reasonable [U.S. Contracting Officer to provide description of the data required in accordance with FAR 15.403-1 with the notification].

(4) As specified in FAR 15.403-1(d), an offeror who does not comply with a requirement to submit data that the U.S. Contracting Officer has deemed necessary to determine price reasonableness or cost realism is ineligible for award unless the head of the contracting activity determines that it is in the best interest of the Government to make the award to that offeror.

(c) Subcontracts. Unless the Offeror is the Canadian Commercial Corporation, the Offeror shall insert the substance of this provision, including this paragraph (c), in all subcontracts exceeding the simplified acquisition threshold defined in FAR part 2.

Section M - Evaluation Factors for Award

Evaluation-Commercial Products and Commercial Services (Feb 2026) (Deviation 2026-O0038)

(a) Evaluation factors. The Government will award a contract resulting from this solicitation to the responsible Offeror whose quote is found to be the most advantageous to the Government, price and other factors considered. The following factors and process will be used to evaluate quotes:

(i) Submitted quotes that conform to the solicitation (e.g., stated terms, conditions, representations, certifications, timeliness, and response to all other required information) will be reviewed by the Contracting Officer to ensure the Offeror is not debarred, suspended, or proposed for debarment.

Offerors found to be debarred, suspended, or proposed for debarment shall be excluded from receiving a contract award and will be removed from the competition.

(ii) Quotes meeting the requirements of paragraph (i) will be evaluated in pursuit of the best value for the Government, considering price and all other factors of the solicitation. In accordance with RFO FAR 12.203(c)(2), a comparative evaluation of the quotes, without objective standards, will be conducted.

(iii) Past Performance: Information for past performance reviews may come from either an information system or personal knowledge of an Offeror. Information may be sourced from systems such as, but not limited to, the Contractor Performance Assessment Reporting System (CPARS), the Supplier Performance Risk System (SPRS), or the Contracting Officer's personal knowledge of work performed on any previous federal contract. If unfavorable information is discovered or known regarding an Offeror, the Offeror may be removed from the competition and further evaluation.

(iv) Technical Review (other factor(s)): The Government will review the 1) list of equipment /materials/labor disciplines, and 2) project schedule--items described in the Instructions--to determine if the Offeror understands the scope of work and demonstrates a thorough knowledge and understanding of the requirement.

a. : The list of equipment, materials, and labor disciplines shall list those items Subfactor 1 necessary to accomplish the scope of work identified in the Statement of Work. This list will be used to evaluate the Offeror's understanding of the technical requirement through an analysis of the major work elements proposed.

b. The project schedule will be evaluated relative to the overall coordination of the Subfactor 2:

construction phase. This includes assessing the Offeror's ability to identify all necessary work elements of the specific project, schedule the activities in a logical sequence, and ensure the contract performance time required in this solicitation (or appropriately proposed by the Offeror) is met. (v)

The Government intends to award a contract, without negotiating, to the quote that represents the best value to the Government; however, the Government reserves the right to negotiate if deemed in its best interest. Examples as to why the Government may deem negotiations to be in its best interest include, but are not limited to: prices/costs are unreasonably low/high, or costs are found to be unbalanced. If the need to negotiate arises, the Government intends to only negotiate with the Offeror being considered for award that represents the anticipated best value to the Government. The Government reserves the right to consider a quote which offers more than the minimum and select that quote if it provides a benefit to the Government. The Government has the discretion to accept other than the lowest priced quote if determined to be the best value to the Government.

(b) Options (if applicable). The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. The evaluation of options does not obligate the Government to exercise the option(s).

(c) . A written notice of award or acceptance of an offer furnished to the Notice of award successful Offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

*** END OF NARRATIVE ***

FAR Provisions Incorporated by Full Text

Number Title Effective Date

Alternate Deviation

Variation Effective Date

52.212-2 Evaluation-Commercial Products and Commercial Services.

(Deviation 2026-O0038) (Tailored)

See Section M

KO FOR PRANG DO NOT DELETE, 200 JOSE A TONY SANTANA AVE

CAROLINA 00979-1514

PUERTO RICO

ANGEL SOLIS, EMAIL: ANGEL.SOLIS.2@US.AF.MIL TELEPHONE: 312-740-9238

WorkDescribed[0]: PROJECT TITLE: REPAIR BLDG. 19 HVAC SYSTEM DUCTWORK INSULATION

PROJECT LOCATION: 156TH WING AT MUÑIZ ANG BASE, CAROLINA, PUERTO RICO

REPAIR BLDG. 19 HVAC SYSTEM DUCTWORK INSULATION

CONSTRUCTION CONTRACT FOR PROJECT# TUMR 262112, REPAIR BLDG. 19 HVAC SYSTEM DUCTWORK INSULATION, FOR 156TH WING AT MUÑIZ ANG BASE, CAROLINA, PUERTO RICO. WORK WILL BE PERFORMED IN ACCORDANCE WITH THE DRAWINGS, PLANS AND TECHNICAL SPECIFICATIONS CONTAINED IN THIS SOLICITATION STATEMENT OF WORK (SOW). THIS SOLICITATION IS A 100% TOTAL SET ASIDE FOR SMALL BUSINESS CONCERNS. COMPETITION IS LIMITED TO ELIGIBLE FIRMS WITH A NORTH AMERICAN INDUSTRY CLASSIFICATION (NAICS) CODE IS 238220 WITH THE SIZE STANDARD FOR SMALL BUSINESS OF $19M AVERAGE ANNUAL REVENUE FOR THE PAST THREE YEARS. PERFORMANCE WILL BE IN THE GEOGRAPHICAL AREA OF CAROLINA, PUERTO RICO. PROJECT MAGNITUDE IS BETWEEN $25,000 AND $100,000. FAILURE TO SUBMIT A BID ON ALL ITEMS SHALL RESULT IN REJECTION OF THE BID. SOLICITATION AND ALL INFORMATION, NOTICES AND AMENDMENTS WILL BE POSTED AT HTTPS://SAM.GOV/. PERIOD OF PERFORMANCE IS 60 CALENDAR DAYS AFTER NOTICE TO PROCEED TO INCLUDE PUNCH LISTS, FINAL INSPECTIONS AND CLOSEOUT.