Solicitation - W50S7T26QA010.pdf

(See ).

SOLICITATION, OFFER,

AND AWARD

(Construction, Alteration, or Repair) IMPORTANT - The "offer" section on the reverse must be fully completed by offeror.

9. FOR

INFORMATION CALL:

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid and "bidder".

SOLICITATION

1. SOLICITATION NUMBER

5. REQUISITION/PURCHASE REQUEST NUMBER

CODE

6. PROJECT NUMBER

8. ADDRESS OFFER TO

4. CONTRACT NUMBER

7. ISSUED BY

10. THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS (Title, identifying number, date)

11. The contractor shall begin performance within

12a. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE AND PAYMENT BONDS?

(If "YES", indicate within how many calendar days after award in Item 12b.)

13. ADDITIONAL SOLICITATION REQUIREMENTS:

a. Sealed offers in original and

b. An offer guarantee

c. All offers are subject to the (1) work requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

d. Offers providing less than

STANDARD FORM 1442 (REV. 12/2022)

Prescribed by GSA - FAR (48 CFR) 53.236-1(d) calendar days for Government acceptance after the date offers are due will not be considered and will be rejected.

is, is not required.

local time containing offers shall be marked to show the offeror's name and address, the solicitation number, and the date and time offers are due.

(date). If this is a sealed bid solicitation, offers will be publicly opened at that time. Sealed envelopes copies to perform the work required are due at the place specified in Item 8 by (hour) award, YES NO notice to proceed. This performance period is mandatory negotiable.

calendar days and complete it within calendar days after receiving

a. NAME b. TELEPHONE NUMBER (Include area code) (NO COLLECT CALLS)

12b. CALENDAR DAYS

2. TYPE OF SOLICITATION

SEALED BID (IFB)

INVITATION FOR BID

NEGOTIATED (RFP)

REQUEST FOR PROPOSAL

3. DATE ISSUED PAGE OF PAGES

AWARD (To be completed by Government)

17. The offeror agrees to perform the work required at the prices specified below in strict accordance with the terms of this solicitation, if this offer is accepted calendar days after the date offers are due. (Insert any number equal to or greater than the minimum requirement by the Government in writing within stated in Item 13d. Failure to insert any number means the offeror accepts the minimum in Item 13d.)

OFFER (Must be fully completed by offeror)

AMOUNTS

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the solicitation -- give number and date of each)

AMENDMENT

NUMBER

DATE

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

14. NAME AND ADDRESS OF OFFEROR (Include ZIP Code)

CODE FACILITY CODE

15. TELEPHONE NUMBER (Include area code)

16. REMITTANCE ADDRESS (Include only if different than Item 14.)

20a. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN OFFER (Type or print)

21. ITEMS ACCEPTED:

22. AMOUNT

26. ADMINISTERED BY

30a. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED TO SIGN (Type or print)

31c. DATE

STANDARD FORM 1442 (REV. 12/2022) BACK

31b. UNITED STATES OF AMERICA

BY

31a. NAME OF CONTRACTING OFFICER (Type or print)

29. AWARD (Contractor is not required to sign this document.) Your offer on this solicitation is hereby accepted as to the items listed. This award consummates the contract, which consists of (a) the Government solicitation and your offer, and (b) this contract award. No further contractual document is necessary.

30b. SIGNATURE 30c. DATE

28. NEGOTIATED AGREEMENT (Contractor is required to sign this document and return and deliver all items or perform all work requirements identified on this form and any continuation sheets for the consideration stated in this contract. The rights and obligations of the parties to this contract shall be governed by (a) this contract award, (b) the solicitation, and (c) the clauses, representations, certifications, and specifications incorporated by reference in or attached to this contract.

copies to issuing office.) Contractor agrees to furnish

24. SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified)

23. ACCOUNTING AND APPROPRIATION DATA

ITEM

25. OTHER THAN FULL AND OPEN COMPETITION PURSUANT TO THE UNITED STATES

CODE AT

27. PAYMENT WILL BE MADE BY

10 U.S.C. 3204(a) ( ) 41 U.S.C. 3304(a) ( )

20b. SIGNATURE 20c. OFFER DATE

Patrick.Ferguson Line

Patrick.Ferguson Line

Section A - Solicitation/Contract Form

182d Airlift Wing Repair Base Fire Alarm SystemInstrument Name:

Product Service Code : J012

W50S7T26QA010

Section B - Supplies or Services & Prices or Costs

Additional Information/Notes

Item Supplies/Service Quanti ty

Unit Unit Price Amount

0001 Node 1 - B536 CERFP Remove and replace existing fire alarm control panel (FACP). Install ethernet compatible communications package that will be compatible with COINv3 standards to develop an infrastructure that meets current reporting requirements. Replace existing initiating devices with addressable devices, compatible with the new system Tie in existing Mass Notification Warning System (MNWS). All units will be installed, programmed and tested to ensure functionality and reporting back to the central stations located in B541 and B636.

Product Service Code: J012

Pricing Arrangement: Firm Fixed Price

1 Lot

0002 Node 3 - B636 Security Forces Remove and replace existing fire alarm control panel (FACP). Install ethernet compatible communications package that will be compatible with COINv3 standards to develop an infrastructure that meets current reporting requirements. Replace

1 Lot existing initiating devices with addressable devices, compatible with the new system Tie in existing Mass Notification Warning System (MNWS). All units will be installed, programmed and tested to ensure functionality and reporting back to the central stations located in B541 and B636.

Product Service Code: J012

Pricing Arrangement: Firm Fixed Price

0003 Node 4 - B730 Engine Shop Remove and replace existing fire alarm control panel (FACP). Install ethernet compatible communications package that will be compatible with COINv3 standards to develop an infrastructure that meets current reporting requirements. Replace existing initiating devices with addressable devices, compatible with the new system Tie in existing Mass Notification Warning System (MNWS). All units will be installed, programmed and tested to ensure functionality and reporting back to the central stations located in B541 and B636.

Product Service Code: J012

Pricing Arrangement: Firm Fixed Price

1 Lot

0004 Node 5 - B830 Avionics Remove and replace existing fire alarm control panel (FACP). Install ethernet compatible communications package that will be compatible with COINv3 standards to develop an infrastructure that meets current reporting requirements. Replace existing initiating devices with addressable devices, compatible with the new system Tie in existing Mass Notification Warning System (MNWS). All units will be installed, programmed and tested to ensure functionality and reporting back to the central stations located in B541 and B636.

Product Service Code: J012

Pricing Arrangement: Firm Fixed Price

1 Lot

0005 Node 6 - B834 AGE Remove and replace existing fire alarm control panel (FACP). Install ethernet compatible communications package that will be compatible with COINv3 standards to develop an infrastructure that meets current reporting requirements. Replace existing initiating devices with addressable devices, compatible with the new system Tie in existing Mass Notification Warning System (MNWS). All units will be installed, programmed and tested to ensure functionality and reporting back to

1 Lot the central stations located in B541 and B636.

Product Service Code: J012

Pricing Arrangement: Firm Fixed Price

0006 Node 7 - B530 POL Complex Remove and replace existing fire alarm control panel (FACP). Install ethernet compatible communications package that will be compatible with COINv3 standards to develop an infrastructure that meets current reporting requirements. Replace existing initiating devices with addressable devices, compatible with the new system Tie in existing Mass Notification Warning System (MNWS). All units will be installed, programmed and tested to ensure functionality and reporting back to the central stations located in B541 and B636.

Product Service Code: J012

Pricing Arrangement: Firm Fixed Price

1 Lot

0007 Node 8 - B728 Base Supply Remove and replace existing fire alarm control panel (FACP). Install ethernet compatible communications package that will be compatible with COINv3 standards to develop an

1 Lot infrastructure that meets current reporting requirements. Replace existing initiating devices with addressable devices, compatible with the new system Tie in existing Mass Notification Warning System (MNWS).All units will be installed, programmed and tested to ensure functionality and reporting back to the central stations located in B541 and B636.

Product Service Code: J012

Pricing Arrangement: Firm Fixed Price

0008 Node 9 - B280 Munitions Remove and replace existing fire alarm control panel (FACP). Install ethernet compatible communications package that will be compatible with COINv3 standards to develop an infrastructure that meets current reporting requirements. Replace existing initiating devices with addressable devices, compatible with the new system Tie in existing Mass Notification Warning System (MNWS). All units will be installed, programmed and tested to ensure functionality and reporting back to the central stations located in B541 and B636.

Product Service Code: J012

Pricing Arrangement: Firm Fixed Price

1 Lot

0009 Node 10 - B836 Aerial Port Remove and replace existing fire alarm control panel (FACP). Install ethernet compatible communications package that will be compatible with COINv3 standards to develop an infrastructure that meets current reporting requirements. Replace existing initiating devices with addressable devices, compatible with the new system Tie in existing Mass Notification Warning System (MNWS). All units will be installed, programmed and tested to ensure functionality and reporting back to the central s

Product Service Code: J012

Pricing Arrangement: Firm Fixed Price

1 Lot

0010 Node 11 - B528 Civil Engineer Remove and replace existing fire alarm control panel (FACP). Install ethernet compatible communications package that will be compatible with COINv3 standards to develop an infrastructure that meets current reporting requirements. Replace existing initiating devices with addressable devices, compatible with the new system Tie in existing Mass Notification Warning System (MNWS). All units will be installed, programmed and tested to ensure

1 Lot functionality and reporting back to and B636.

Product Service Code: J012

Pricing Arrangement: Firm Fixed Price

0011 Node 12 - B628 Headquarters Remove and replace existing fire alarm control panel (FACP). Install ethernet compatible communications package that will be compatible with COINv3 standards to develop an infrastructure that meets current reporting requirements. Replace existing initiating devices with addressable devices, compatible with the new system Tie in existing Mass Notification Warning System (MNWS). All units will be installed, programmed and tested to ensure functionality and reporting back to the central stations located in B541 and B636. Tie in existing Very Early Warning Smoke Detection system (VESDA) Tie in existing communications vault suppression / detection system Tie in existing kitchen detection and suppression notification systems

Product Service Code: J012

Pricing Arrangement: Firm Fixed Price

1 Lot

0012 Node 13 - B620 Recruiting Install ethernet compatible communications package to recently installed FACP that will be compatible with COINv3 standards to develop an infrastructure that meets current reporting requirements. Upgrade existing addressable devices compatible with the new system Tie in existing Mass Notification Warning System (MNWS). All units will be installed, programmed and tested to ensure functionality and reporting back to the central stations located in B541 and B636.

Product Service Code: J012

Pricing Arrangement: Firm Fixed Price

1 Lot

0013 Node 14 - B820 Vehicle Maintenance Remove and replace existing fire alarm control panel (FACP). Install ethernet compatible communications package that will be compatible with COINv3 standards to develop an infrastructure that meets current reporting requirements. Replace existing initiating devices with addressable devices, compatible with the new system Tie in existing Mass Notification Warning System (MNWS). All units will be installed, programmed and tested to ensure

1 Lot functionality and reporting back to and B636.

Product Service Code: J012

Pricing Arrangement: Firm Fixed Price

0014 Node 15 - B541 Fire Department Install ethernet compatible communications package to recently installed FACP that will be compatible with COINv3 standards to develop an infrastructure that meets current reporting requirements. Upgrade existing addressable devices compatible with the new system Tie in existing Mass Notification Warning System (MNWS). All units will be installed, programmed and tested to ensure functionality and reporting back to the central stations located in B541 and B636.

Product Service Code: J012

Pricing Arrangement: Firm Fixed Price

1 Lot

0015 Node 16 - B615 Lift Station Remove and replace existing fire alarm control panel (FACP). Install ethernet compatible communications package that will be compatible with COINv3 standards to develop an infrastructure that meets current

1 Lot reporting requirements. Replace existing initiating devices with addressable devices, compatible with the new system All units will be installed, programmed and tested to ensure functionality and reporting back to the central stations located in B541 and B636.

Product Service Code: J012

Pricing Arrangement: Firm Fixed Price

0016 Node 17 - B831 Pump House Remove and replace existing fire alarm control panel (FACP). Install ethernet compatible communications package that will be compatible with COINv3 standards to develop an infrastructure that meets current reporting requirements. Replace existing initiating devices with addressable devices, compatible with the new system All units will be installed, programmed and tested to ensure functionality and reporting back to the central stations located in B541 and B636.

Product Service Code: J012

Pricing Arrangement: Firm Fixed Price

1 Lot

0017 Node 20 - B835 Combat Comm Cold Storage Remove and replace existing fire alarm control panel

1 Lot

(FACP). Install ethernet compatible communications package that will be compatible with COINv3 standards to develop an infrastructure that meets current reporting requirements. Replace existing initiating devices with addressable devices, compatible with the new system All units will be installed, programmed and tested to ensure functionality and reporting back to the central stations located in B541 and B636.

Product Service Code: J012

Pricing Arrangement: Firm Fixed Price

0018 Node 21 - B630 Combat Comm / Army Band Remove and replace existing fire alarm control panel (FACP). Install ethernet compatible communications package that will be compatible with COINv3 standards to develop an infrastructure that meets current reporting requirements. Replace existing initiating devices with addressable devices, compatible with the new system Tie in existing Mass Notification Warning System (MNWS). All units will be installed, programmed and tested to ensure functionality and reporting back to the central stations located in B541 and B636.

Product Service Code: J012

1 Lot

Pricing Arrangement: Firm Fixed Price

0019 B636 Node 22 Install TSW Remove existing TSW from site Install ethernet compatible communications package that will be compatible with COINv3 standards to develop an infrastructure that meets current reporting requirements. Install new TSW with Windows11 platform or similar that is compatible with COINv3 standards. Install new graphics and user interface that have been approved by the COR or designated representative, that at a minimum includes a base map, building numbers and approved notifications. Install minimum 30 minute battery backup power supply for TSW to sustain device in the event of power service interruption.

Product Service Code: J012

Pricing Arrangement: Firm Fixed Price

1 Lot

0020 B541 Node 23 Install TSW Remove existing TSW from site Install ethernet compatible communications package that will be compatible with COINv3 standards to develop an infrastructure that meets current reporting requirements. Install new

1 Lot

TSW with Windows11 platform or similar that is compatible with COINv3 standards. Install new graphics and user interface that have been approved by the COR or designated representative, that at a minimum includes a base map, building numbers and approved notifications. Install minimum 30 minute battery backup power supply for TSW to sustain device in the event of power service interruption.

Product Service Code: J012

Pricing Arrangement: Firm Fixed Price

0021 Node 24 B320 - Comm/CRG Remove and replace existing fire alarm control panel (FACP). Install ethernet compatible communications package that will be compatible with COINv3 standards to develop an infrastructure that meets current reporting requirements. Replace existing initiating devices with addressable devices, compatible with the new system Tie in existing Mass Notification Warning System (MNWS). All units will be installed, programmed and tested to ensure functionality and reporting back to the central stations located in B541 and B636.

Product Service Code: J012

1 Lot

Pricing Arrangement: Firm Fixed Price

0022 Node 25 - B634 Flight Operations Install ethernet compatible communications package to recently installed FACP that will be compatible with COINv3 standards to develop an infrastructure that meets current reporting requirements. Upgrade existing addressable devices compatible with the new system Tie in existing Mass Notification Warning System (MNWS). All units will be installed, programmed and tested to ensure functionality and reporting back to the central stations located in B541 and B636.

Product Service Code: J012

Pricing Arrangement: Firm Fixed Price

1 Lot

0023 Node 26 - B837 Emergency Management Remove and replace existing fire alarm control panel (FACP). Install ethernet compatible communications package that will be compatible with COINv3 standards to develop an infrastructure that meets current reporting requirements. Replace existing initiating devices with addressable devices, compatible with the new system Tie in existing Mass Notification Warning System

1 Lot

(MNWS). All units will be installed, programmed and tested to ensure functionality and reporting back to the central stations located in B541 and B636.

Product Service Code: J012

Pricing Arrangement: Firm Fixed Price

0024 Node 27 - Hazmart Remove and replace existing fire alarm control panel (FACP). Install ethernet compatible communications package that will be compatible with COINv3 standards to develop an infrastructure that meets current reporting requirements. Replace existing initiating devices with addressable devices, compatible with the new system Tie in existing Mass Notification Warning System (MNWS). All units will be installed, programmed and tested to ensure functionality and reporting back to the central stations located in B541 and B636.

Product Service Code: J012

Pricing Arrangement: Firm Fixed Price

1 Lot

Section C - Description/Specifications/Statement of Work

182d Airlift Wing: Repair Base Fire Alarm System

A. The project consists of, but is not limited to: Remove and replace existing fire alarm panels in various buildings throughout the base in accordance with UFC 3-600-01 and ANG ETL 15-01-03 standards. See attachment 1: SOW_ Repair Base Fire Alarm System (2) for more details.

B. The contract will consist of 365-day period of performance from date of award.

C. The NAICS code is 561210, the PSC code is J012.

D. All prices should be included in the quote.

E. Contractor should reference section L, Instructions, conditions, and Notices to Offerors for preparation of quotes. The solicitation will be evaluated using lowest price technically acceptable as stated in Section M.

F. An optional site visit will be conducted on 18 August 2026 at 1:00PM Central Daylight Time at the Peoria ANG Base, Peoria Illinois.

G. All questions must be submitted by 21 August 2026 at 12:00PM Central Daylight Time to emily.

scully.1@us.af.mil and nicholas.marzinzik@us.af.mil.

*** Any offeror wanting to participate in the site visit on 18 August 2026 at 1:00PM CDT must inform the contracting office via email by 14 August 2026 2:00PM CDT. Please email emily.scully.

1@us.af.mil and nicholas.marzinzik@us.af.mil to confirm attendance and provide make and model of the vehicle with how many members attending. Site visit is optional. ***

*** END OF NARRATIVE ***

Requirements

WORK OF THIS CONTRACT COMPRISES OF PROVIDING ALL MATERIALS, TOOLS,

EQUIPMENT AND LABOR NECESSARY TO: REMOVE AND REPLACE EXISTING FIRE ALARM

PANELS IN VARIOUS BUILDINGS THROUGHOUT THE BASE IN ACCORDANCE WITH UFC 3-

600-01 AND ANG ETL 15-01-03 STANDARDS.. REMOVE AND REPLACE EXISTING

INITIATING DEVICES WITH ADDRESSABLE UNITS. UPGRADE ALL COMMUNICATION

DEVICES FROM EXISTING FIBER BETWEEN BUILDINGS TO COINV3 ETHERNET

COMPATIBLE UNITS. REPLACE EXISTING TRUESITE WORKSTATIONS (TSW) WITH NEW,

COINV3 COMPATIBLE TSWS WITH UPGRADED GRAPHICS AND NOMENCLATURE. ALL

UNITS WILL BE INSTALLED, PROGRAMMED AND TESTED THROUGHOUT EACH FACILITY

AND AT EACH TSW. FIRE ALARM PANELS AND WORKSTATIONS SHALL BE

MANUFACTURED BY SIMPLEX TO ENSURE COMPATIBILITY AND INTEROPERABILITY WITH

RECENTLY INSTALLED SYSTEMS THROUGHOUT THE BASE.

Section E - Inspection and Acceptance

Overall Contract Inspection/Acceptance Locations

0001 Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) for instructions.

DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528

PEORIA, IL 61607-5023

UNITED STATES

Benjamin Reed

0002 Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) for instructions.

DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528

PEORIA, IL 61607-5023

UNITED STATES

Benjamin Reed

0003 Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) for instructions.

DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528

PEORIA, IL 61607-5023

UNITED STATES

Benjamin Reed

0004 Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) for instructions.

DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528

PEORIA, IL 61607-5023

UNITED STATES

Benjamin Reed

0005 Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) for instructions.

DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528

PEORIA, IL 61607-5023

UNITED STATES

Benjamin Reed

0006 Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) for instructions.

DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528

PEORIA, IL 61607-5023

UNITED STATES

Benjamin Reed

0007 Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) for instructions.

DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528

PEORIA, IL 61607-5023

UNITED STATES

Benjamin Reed

0008 Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) for instructions.

DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528

PEORIA, IL 61607-5023

UNITED STATES

Benjamin Reed

0009 Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) for instructions.

DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528

PEORIA, IL 61607-5023

UNITED STATES

Benjamin Reed

0010 Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) for instructions.

DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528

PEORIA, IL 61607-5023

UNITED STATES

Benjamin Reed

0011 Inspection and Acceptance Location

Destination Instructions: See Statement of Work (SOW) for instructions.

DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528

PEORIA, IL 61607-5023

UNITED STATES

Benjamin Reed

0012 Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) for instructions.

DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528

PEORIA, IL 61607-5023

UNITED STATES

Benjamin Reed

0013 Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) for instructions.

DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528

PEORIA, IL 61607-5023

UNITED STATES

Benjamin Reed

0014 Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) for instructions.

DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528

PEORIA, IL 61607-5023

UNITED STATES

Benjamin Reed

0015 Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) for instructions.

DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528

PEORIA, IL 61607-5023

UNITED STATES

Benjamin Reed

0016 Inspection and Acceptance Location

Instructions: See Statement of Work (SOW) for instructions.

DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528

PEORIA, IL 61607-5023

UNITED STATES

Benjamin Reed

0017 Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) for instructions.

DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528

PEORIA, IL 61607-5023

UNITED STATES

Benjamin Reed

0018 Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) for instructions.

DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528

PEORIA, IL 61607-5023

Benjamin Reed

0019 Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) for instructions.

DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528

PEORIA, IL 61607-5023

UNITED STATES

Benjamin Reed

0020 Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) for instructions.

DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528

PEORIA, IL 61607-5023

UNITED STATES

Benjamin Reed

0021 Inspection and Acceptance Location

Instructions: See Statement of Work (SOW) for instructions.

DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528

PEORIA, IL 61607-5023

UNITED STATES

Benjamin Reed

0022 Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) for instructions.

DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528

PEORIA, IL 61607-5023

UNITED STATES

Benjamin Reed

0023 Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) for instructions.

DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528

PEORIA, IL 61607-5023

0024 Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) for instructions.

DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528

PEORIA, IL 61607-5023

UNITED STATES

Benjamin Reed

Section F - Deliveries or Performance

0001 1 LotQuantity

Address and POC Place of Performance DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528 PEORIA,

IL 61607-5023 UNITED STATES

Benjamin Reed

Period of Performance From 30 Sep 2026 To 29 Sep 2027

0002 1 LotQuantity

Address and POC Place of Performance DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528 PEORIA,

IL 61607-5023 UNITED STATES

Benjamin Reed

Period of Performance From 30 Sep 2026

To 29 Sep 2027

0003 1 LotQuantity

Address and POC Place of Performance DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528 PEORIA,

IL 61607-5023 UNITED STATES

Benjamin Reed

Period of Performance From 30 Sep 2026 To 29 Sep 2027

0004 1 LotQuantity

Address and POC Place of Performance DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528 PEORIA,

IL 61607-5023 UNITED STATES

Benjamin Reed

Period of Performance

From 30 Sep 2026 To 29 Sep 2027

0005 1 LotQuantity

Address and POC Place of Performance DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528 PEORIA,

IL 61607-5023 UNITED STATES

Benjamin Reed

Period of Performance From 30 Sep 2026 To 29 Sep 2027

0006 1 LotQuantity

Address and POC Place of Performance DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528 PEORIA,

IL 61607-5023 UNITED STATES

Benjamin Reed

Period of Performance

30 Sep 2026 To 29 Sep 2027

0007 1 LotQuantity

Address and POC Place of Performance DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528 PEORIA,

IL 61607-5023 UNITED STATES

Benjamin Reed

Period of Performance From 30 Sep 2026 To 29 Sep 2027

0008 1 LotQuantity

Address and POC Place of Performance DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528 PEORIA,

IL 61607-5023 UNITED STATES

Benjamin Reed

30 Sep 2026 To 29 Sep 2027

0009 1 LotQuantity

Address and POC Place of Performance DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528 PEORIA,

IL 61607-5023 UNITED STATES

Benjamin Reed

Period of Performance From 30 Sep 2026 To 29 Sep 2027

0010 1 LotQuantity

Address and POC Place of Performance DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528 PEORIA,

IL 61607-5023 UNITED STATES

From 30 Sep 2026 To 29 Sep 2027

0011 1 LotQuantity

Address and POC Place of Performance DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528 PEORIA,

IL 61607-5023 UNITED STATES

Benjamin Reed

Period of Performance From 30 Sep 2026 To 29 Sep 2027

0012 1 LotQuantity

Address and POC Place of Performance DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528 PEORIA,

IL 61607-5023 UNITED STATES

From 30 Sep 2026 To 29 Sep 2027

0013 1 LotQuantity

Address and POC Place of Performance DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528 PEORIA,

IL 61607-5023 UNITED STATES

Benjamin Reed

Period of Performance From 30 Sep 2026 To 29 Sep 2027

0014 1 LotQuantity

Address and POC Place of Performance DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528 PEORIA,

IL 61607-5023 UNITED STATES

Benjamin Reed

Period of Performance From 30 Sep 2026 To 29 Sep 2027

0015 1 LotQuantity

Address and POC Place of Performance DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528 PEORIA,

IL 61607-5023 UNITED STATES

Benjamin Reed

Period of Performance From 30 Sep 2026 To 29 Sep 2027

0016 1 LotQuantity

Address and POC Place of Performance DoDAAC: F8P3SR CountryCode: USA

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528 PEORIA,

IL 61607-5023 UNITED STATES

Benjamin Reed

Period of Performance From 30 Sep 2026 To 29 Sep 2027

0017 1 LotQuantity

Address and POC Place of Performance DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528 PEORIA,

IL 61607-5023 UNITED STATES

Benjamin Reed

Period of Performance From 30 Sep 2026 To 29 Sep 2027

0018 1 LotQuantity

Address and POC Place of Performance DoDAAC: F8P3SR

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528 PEORIA,

IL 61607-5023 UNITED STATES

Benjamin Reed

Period of Performance From 30 Sep 2026 To 29 Sep 2027

0019 1 LotQuantity

Address and POC Place of Performance DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528 PEORIA,

IL 61607-5023 UNITED STATES

Benjamin Reed

Period of Performance From 30 Sep 2026 To 29 Sep 2027

0020 1 LotQuantity

Address and POC Place of Performance

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528 PEORIA,

IL 61607-5023 UNITED STATES

Benjamin Reed

Period of Performance From 30 Sep 2026 To 29 Sep 2027

0021 1 LotQuantity

Address and POC Place of Performance DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528 PEORIA,

IL 61607-5023 UNITED STATES

Benjamin Reed

Period of Performance From 30 Sep 2026 To 29 Sep 2027

0022 1 LotQuantity

Address and POC

Place of Performance

CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528 PEORIA,

IL 61607-5023 UNITED STATES

Benjamin Reed

Period of Performance From 30 Sep 2026 To 29 Sep 2027

0023 1 LotQuantity

Address and POC Place of Performance DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528 PEORIA,

IL 61607-5023 UNITED STATES

Benjamin Reed

Period of Performance From 30 Sep 2026 To 29 Sep 2027

0024 1 LotQuantity

Address and POC Place of Performance DoDAAC: F8P3SR CountryCode: USA

SUSTAINMENT RESTORATION

AF BPN NO MILSBILLS PROCESSES, 6915 W SMITHVILLE RD BLDG 528 PEORIA,

IL 61607-5023 UNITED STATES

Benjamin Reed

Period of Performance From 30 Sep 2026 To 29 Sep 2027

Section G - Contract Administration Data

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate Deviation

Variation Effective Date

252.201-7000 Contracting Officer's Representative.

1991-12

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports.

2018-12

252.236-7000 Modification Proposals--Price Breakdown.

1991-12

DFARS Clauses Incorporated by Full Text

Number Title Effective Date

Alternate Deviation

Variation Effective Date

252.232-7006 Wide Area WorkFlow Payment Instructions.

2023-01

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) Definitions. As used in this clause-

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall-

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web- Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

(Contracting Officer: Insert either "Invoice 2in1" or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF Pay Official DoDAAC ____ Issue By DoDAAC ____

Admin DoDAAC ____ Inspect By DoDAAC ____ Ship To Code ____ Ship From Code ____ Mark For Code ____ Service Approver (DoDAAC) ____ Service Acceptor (DoDAAC) ____ Accept at Other DoDAAC ____ LPO DoDAAC ____ DCAA Auditor DoDAAC ____ Other DoDAAC(s) ____ (*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.")

(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

(Contracting Officer: Insert applicable information or "Not applicable.")

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Section I - Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate Deviation

Variation Effective Date

52.203-3 Gratuities. 1984-04

52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements.

2017-01

52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards. (Deviation 2026-O0038)

2026-02

52.204-13 System for Award Management- Maintenance. (Deviation 2026- O0038)

2026-02

52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (Deviation 2026- O0038)

2026-02

52.209-9 Updates of Publicly Available Information Regarding Responsibility Matters.

(Deviation 2026-O0038)

2026-02

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations.

(Deviation 2026-O0038)

2026-02

52.219-8 Utilization of Small Business Concerns. (Deviation 2026- O0038)

2026-02

52.222-3 Convict Labor. (Deviation 2026- O0038)

2026-02

52.222-35 Equal Opportunity for Veterans.

(Deviation 2026-O0038)

2026-02

52.222-36 Equal Opportunity for Workers with Disabilities. (Deviation 2026- O0038)

2026-02

52.222-37 Employment Reports on Veterans. (Deviation 2026- O0038)

2026-02

52.222-40 Notification of Employee Rights Under the National Labor Relations Act. (Deviation 2026- O0038)

2026-02

52.222-50 Combating Trafficking in Persons. (Deviation 2026-O0038)

2026-02

52.222-54 Employment Eligibility Verification. (Deviation 2026- O0038)

2026-02

52.222-90 Addressing DEI Discrimination by Federal Contractors.

(Deviation 2026-O0040, Revision 1)

2026-04

52.223-23 Sustainable Products. (Deviation 2026-O0038)

2026-02

52.226-8 Encouraging Contractor Policies to Ban Text Messaging While

2024-05

Driving.

52.228-2 Additional Bond Security. 1997-10

52.228-3 Workers' Compensation Insurance (Defense Base Act).

2014-07

52.228-15 Performance and Payment Bonds-Construction.

2020-06

52.229-12 Tax on Certain Foreign Procurements. (Deviation 2026- O0038)

2026-02

52.232-27 Prompt Payment for Construction Contracts.

2017-01

52.232-33 Payment by Electronic Funds Transfer-System for Award Management.

2018-10

52.232-40 Providing Accelerated Payments to Small Business Subcontractors.

2023-03

52.233-3 Protest after Award. (Deviation 2026-O0038)

2026-02

52.233-4 Applicable Law for Breach of Contract Claim. (Deviation 2026- O0038)

2026-02

52.236-2 Differing Site Conditions.

(Deviation 2026-O0038)

2026-02

52.236-3 Site Investigation and Conditions Affecting the Work. (Deviation 2026-O0038)

2026-02

52.236-5 Material and Workmanship. 2026-02

(Deviation 2026-O0038)

52.236-6 Superintendence by the Contractor. (Deviation 2026- O0038)

2026-02

52.236-7 Permits and Responsibilities.

(Deviation 2026-O0038)

2026-02

52.236-8 Other Contracts. (Deviation 2026- O0038)

2026-02

52.236-9 Protection of Existing Vegetation, Structures, Equipment, Utilities, and Improvements. (Deviation 2026-O0038)

2026-02

52.236-10 Operations and Storage Areas.

(Deviation 2026-O0038)

2026-02

52.236-11 Use and Possession Prior to Completion. (Deviation 2026- O0038)

2026-02

52.236-12 Cleaning Up. (Deviation 2026- O0038)

2026-02

52.236-13 Accident Prevention. (Deviation 2026-O0038)

2026-02

52.236-15 Schedules for Construction Contracts. (Deviation 2026- O0038)

2026-02

52.236-21 Specifications and Drawings for Construction. (Deviation 2026- O0038)

2026-02

52.240-91 Security Prohibitions and Exclusions. (Deviation 2026-

2026-02

O0038)

52.243-1 Changes-Fixed-Price. (Deviation 2026-O0038) (Alternate II)

2026-02 Alternate

II

2026-02

52.244-6 Subcontracts for Commercial Products and Commercial Services. (Deviation 2026-O0038)

2026-04

52.246-21 Warranty of Construction. 1994-03

DFARS Clauses Incorporated by Reference

Date

Alternate Deviation

Variation Effective Date

252.203-7000 Requirements Relating to Compensation of Former DoD Officials.

2011-09

252.203-7002 Requirement to Inform Employees of Whistleblower Rights.

2022-12

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting.

2024-05

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

2023-01

252.223-7008 Prohibition of Hexavalent Chromium.

2023-01

252.225-7012 Preference for Certain Domestic 2022-04

Commodities.

252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime.

2023-01

252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region.

2023-06

252.226-7001 Utilization of Indian Organizations, Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns.

2023-01

252.232-7010 Levies on Contract Payments. 2006-12

252.243-7002 Requests for Equitable Adjustment.

2022-12

252.247-7023 Transportation of Supplies by Sea.

2024-10

FAR Clauses Incorporated by Full Text

Date

Alternate Deviation

Variation Effective Date

52.252-2 Clauses Incorporated by Reference.

1998-02

Clauses Incorporated By Reference (Feb 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

____ ____ ____[Insert one or more Internet addresses]

52.252-6 Authorized Deviations in Clauses. 2020-11

Authorized Deviations in Clauses (Nov 2020)

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.

(b) The use in this solicitation or contract of any ____[insert regulation name] (48 CFR ____) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

DFARS Clauses Incorporated by Full Text

Date

Alternate Deviation

Variation Effective Date

252.236-7001 Contract Drawings and Specifications.

2000-08

CONTRACT DRAWINGS AND SPECIFICATIONS (AUG 2000)

(a) The Government will provide to the Contractor, without charge, one set of contract drawings and specifications, except publications incorporated into the technical provisions by reference, in electronic or paper media as chosen by the Contracting Officer.

(b) The Contractor shall-

(1) Check all drawings furnished immediately upon receipt;

(2) Compare all drawings and verify the figures before laying out the work;

(3) Promptly notify the Contracting Officer of any discrepancies;

(4) Be responsible for any errors that might have been avoided by complying with this paragraph (b); and

(5) Reproduce and print contract drawings and specifications as needed.

(c) In general--

(1) Large-scale drawings shall govern small-scale drawings; and

(2) The Contractor shall follow figures marked on drawings in preference to scale measurements.

(d) Omissions from the drawings or specifications or the misdescription of details of work that are manifestly necessary to carry out the intent of the drawings and specifications, or that are customarily performed, shall not relieve the Contractor from performing such omitted or misdescribed details of the work. The Contractor shall perform such details as if fully and correctly set forth and described in the drawings and specifications.

(e) The work shall conform to the specifications and the contract drawings identified on the following index of drawings:

Title File Drawing No.

Section J - List of Attachments

Attachment 1: SOW_ Repair Base Fire Alarm System (2)

Attachment 2: Davis Bacon Act WD# IL20260020

*** END OF NARRATIVE ***

Identifier Document Name

Document Description

Reference Identifier

Date Line Item

Page Numbers

Document Type

Provided Under Separate Cover

0001 SOW_Repair Base Fire Alarm Sys tem (2)

Statement of Work 12 Aug

Attachment No

0002 Davis Baco n Act WD I L20260020

Davis Bacon Act

WD# IL20260020

Aug

Attachment No

Section K - Representations, Certification, & Other Statements

FAR Provisions Incorporated by Reference

Number Title Effective Date

Alternate Deviation

Variation Effective Date

52.203-11 Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions.

2024-09

52.240-90 Security Prohibitions and Exclusions Representations and Certifications. (Deviation 2026-

2026-02

DFARS Provisions Incorporated by Reference

Date

Alternate Deviation

Variation Effective Date

252.203-7005 Representation Relating to Compensation of Former DoD Officials.

2022-09

252.204-7008 Compliance with Safeguarding Covered Defense Information Controls.

2016-10

252.225-7055 Representation Regarding Business Operations with the Maduro Regime.

2022-05

252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region-

2023-06

Representation.

FAR Provisions Incorporated by Full Text

Date

Alternate Deviation

Variation Effective Date

52.229-11 Tax on Certain Foreign Procurements-Notice and Representation. (Deviation 2026-

Tax on Certain Foreign Procurements-Notice and Representation (Feb 2026) (Deviation 2026-

(a) Definitions. As used in this provision-

Foreign person means any person other than a United States person.

Specified Federal procurement payment means any payment made pursuant to a contract with a foreign contracting party that is for goods, manufactured or produced, or services provided in a foreign country that is not a party to an international procurement agreement with the United States. For purposes of the prior sentence, a foreign country does not include an outlying area of the United States.

United States person as defined in 26 U.S.C. 7701(a)(30) means

(1) A citizen or resident of the United States;

(2) A domestic partnership;

(3) A domestic corporation;

(4) Any estate (other than a foreign estate, within the meaning of 26 U.S.C. 701(a)(31)); and

(5) Any trust if-

(i) A court within the United States is able to exercise primary supervision over the administration of the trust; and

(ii) One or more United States persons have the…