Solicitation - N0016726Q1067.pdf

This is a combined synopsis/solicitation for commercial items prepared in accordance with Federal Acquisition Regulation (FAR) Subpart 12.6 and Subpart 13 as supplemented with additional information included in this notice.

Naval Surface Warfare Center Carderock Division (NSWCCD) intends to award a firm fixed price (FFP) purchase order using Simplified Acquisition Procedures for the establishment of a Blanket Purchase Agreement (BPA) with and expected ordering period not to exceed two (2) years, that establishes the terms and conditions applicable to procurement of prototype Gieger-Mueller (GM) tubes that meet the specifications outlined below. This announcement constitutes the only solicitation, and a written solicitation will not be issued. Quotes are being requested under Request for Quotation (RFQ) no. N0016726Q1067. The NAICS code is 334419 and the business size standard is 750 Employees.

The provisions and clauses included and/or incorporated in this solicitation document are those in effect through the Federal Acquisition Circular. This RFQ incorporates all provisions and clauses in effect through Federal Acquisition Circular FAC 2026-01 and the Defense Federal Acquisition Regulation Supplement (DFARS) DPN 20251110. SEE

ATTACHED SOLICITATION FOR CLAUSES AND PROVISIONS.

The Government will award a contract resulting from this solicitation to the responsible quoter whose quote, conforming to the solicitation that will be most advantageous to the Government, price and other factors considered.

The Government intends to evaluate all timely quotes received from eligible quoters on a lowest price technically acceptable (LPTA) basis. The Government intends to evaluate quotations and award a contract without discussions with quoters.

Evaluation Factors (See 52.212-2- Evaluation—Commercial Products and Commercial Services)

1. Technical Capability/Approach – Quotes must reflect the required specifications included in the RFQ.

2. Past Performance - The past performance evaluation assesses the degree of confidence the Government has in the Offeror’s ability to provide products and services that meet its customers’ needs based on a demonstrated record of performance.

Questions/clarification regarding this solicitation must be submitted via email to michael.s.brodie7.civ@us.navy.mil by Apr 03, 2026, at 12pm EST. All questions will be answered in an amendment to the solicitation.

Quote packages are due by April 14, 2026, at 12pm EST. Late quotes will not be considered. Quote packages shall be sent to michael.s.brodie7.civ@us.navy.mil and contain a cover sheet that provides the following information:

a) Official Company Name.

b) Point of contact including name and phone number; and

c) Cage Code number.

d) SAM UEI number

The Point of Contact for this acquisition is Michael Brodie, at michael.s.brodie7.civ@us.navy.mil mailto:steven.besanko@navy.mil mailto:barbaraann.witz@navy.mil mailto:barbaraann.witz@navy.mil

Solicitation/Contract Form Continuation

Two year BPA for prototype Gieger-Mueller (GM) tubes

N0016726Q1067

Continuation of Supplies or Services and Prices/Costs

Additional Information/Notes

SUPPLIES AND SERVICES

The Naval Surface Warfare Center, Carderock Division, (NSWCCD) invites vendors to enter into a Blanket Purchase Agreement (BPA) that establishes the terms and conditions applicable to procuring prototype Gieger-Mueller (GM) tubes. As a result of this solicitation a single vendor is needed to provide the services; however, the Government reserves the right to award to multiple vendors if it is determined to be in the best interest of the Government based on vendor ability to fill the Government need at required locations.

Definitions - the following definitions apply to this requirement:

a. Blanket Purchase Agreement (BPA) -- a simplified method of filling anticipated repetitive needs for supplies or services by establishing "charge accounts" with qualified sources of supply.

b. Call -- an order against a BPA which can be placed only by an authorized caller.

c. Caller -- an individual authorized to make a call (place an order) against a BPA; any Contracting Officer (CO) from NSWCCD, is an authorized caller provided they identify themselves as such to the Contractor.

d. Request For Quote (RFQ) - an official request for pricing from the Government. These will be issued to the BPA holders via email but can include phone calls.

BPA TERMS AND CONDITIONS

1. The entities awarded the Blanket Purchase Agreement (BPA) shall provide the equipment in the Minimum Specifications provided in the solicitation and stated on CLINs.

2. The government is obligated only to the extent of authorized purchases actually made under the BPA. This agreement may be terminated upon 30 days written notice by either party.

3. The period of performance of the BPA will not exceed the duration of two (2) years or until the total of all Calls (Ceiling) is reached, whichever occurs first.

4. This BPA does not obligate any funds. Funds are obligated when an authorized BPA Call Order is placed with the contractor in conjunction with this BPA. The Government is obligated only to the extent of authorized individual purchases actually placed under this BPA. NSWCCD Accounting and Appropriation data will be included in each call placed under this BPA.

5. Purchase limitation. Individual purchases shall not exceed the simplified acquisition threshold. The total of all BPA Calls may not exceed the total ceiling price. BPA Master Dollar Ceiling: $349,999.00.

6. Orders placed against this BPA are subject to the terms and conditions of this BPA.

7. Quotes submitted under this BPA shall be Firm Fixed Price (FFP).

8. Shipping shall be FOB Destination in accordance with FAR 52.247-34.

9. The prices to the Government for all calls made under this agreement shall be as low as, or lower than, those charged to suppliers most favored customer, in addition to any discounts for prompt payment. Purchases under the awarded BPAs will be made in accordance with FAR 8.403 and DFARS 208.4. Current pricing (Quote) will be requested from vendors at the time a requirement is determined by the government. Price reasonableness shall be determined at the BPA Call level.

10. Price Reasonableness. Price reasonableness shall be determined at the BPA Call level. For evaluation purposes provide pricing for the following items.

11. The Contractor shall submit invoices for completed, delivered calls using the Wide Area Work Flow (WAWF) Online Application, which can be found in the Procurement Integrated Enterprise Environment (PIEE) https://wawf.eb.mil. Complete invoicing information will be found in Defense FAR Supplement (DFARS) Clause 252.232-7006.

12. Technical Point of Contact. NSWCCD assigned technical point of contact will review invoices for payment per each call against this BPA (See G- 242-H001).

13. Product Classification Code. The PSC allowed for ordering against this BPA is 5960, NAICS: 334419.

14. Delivery tickets. A requirement that all shipments under the agreement, except those for newspapers, magazines, or other periodicals, shall be accompanied by delivery tickets or sales slips that shall contain the following minimum information:

(i) Name of supplier.

(ii) BPA Number.

(iii) Date of Purchase.

(iv) Purchase order number.

(v) Itemized list of supplies or services furnished.

(vi) Quantity, unit price, and extension of each item, less applicable discounts (unit prices and extensions need not be shown when incompatible with the use of automated systems, provided that the invoice is itemized to show this information)

(vii) Date of delivery or shipment.

15. A summary invoice shall be submitted after every call or upon expiration of this BPA, whichever occurs first, for all deliveries made during a billing period, identifying the delivery tickets covered therein, stating their total dollar value, and supported by receipt copies of the delivery tickets

Allowed Per Order Maximum: 349,999.00 Dollars, U.S.

Government Minimum/Maximum to Order Maximum: 349,999.00 Dollars, U.S.

Item Supplies/Service Quantity Unit Unit Price Amount

Prototype Gieger-Mueller (GM) tube BPA Initial Year Quantity In Accordance with Attached Minimum Specifications

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

Pricing Arrangement: Firm Fixed Price

3 Each

Prototype Gieger-Mueller (GM) tube BPA Second Year Quantity In Accordance with Attached Minimum Specifications

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

Pricing Arrangement: Firm Fixed Price

5 Each

Continuation of Description

Title: Prototype GM Tubes (two-year Blanket Purchase Agreements (BPAs))

1. Scope

Naval Surface Warfare Center Carderock Division (NSWCCD) Radiation Detection Technology Branch (RDTB), through Naval Sea Systems Command (NAVSEA) 04RD, has been tasked with procuring prototype Gieger-Mueller (GM) tubes as an alternative to sustain fielding of the Multi-Function RADIAC (MFR) survey meter used throughout the Naval Nuclear Propulsion Program.

2. Background

GM tubes are needed for use in the MFR, specifically the control unit (IM-265) and the gamma-beta probe (DT-680). The MFR has been in use for over 20 years with over 10,000 units in the field. The current GM tube has become more unreliable with increased failure rate. Thus, the RDTB aims to find an alternative, accurate and durable GM tube to sustain the MFR.

3. Objective and Product Specification:

The NSWCCD RDTB intends to establish multiple-award blanket purchase agreements (BPAs) for the purpose of ordering prototype GM tubes, per paras. 3.1 and 3.2, below.

This specification document applies to each of the contractors/manufacturers listed in Enclosure (1) Manufacturers List.

3.1 (BPA Year 1) Upon establishment of the BPA an initial order is anticipated of up to three (3) GM tubes with the following characteristics and specifications:

Characteristic Specification

Sensitivity*** 137Cs cpm at 1 mR/h 270

Recommended Operating Voltage 460

Plateau Length Volts (min.) 420-520

Plateau Slope (%/100 V max.) 30

Dead Time (s max.) 60

Background (cpm)*** Shielding 2" Pb + 1/8" Al 25 max.

Operating Temp (C) -20 to +60

Cathode Material Cr/Fe

Cathode Wall 280 mg/cm2

*** At recommended operating voltage

*** SEE ATTACHED MINIMUM SPECIFICATIONS DOUMENT FOR DIAGRAM *****

Exposure rate range: 0.01 mR/h - 1,000 R/h

Thickness of lead wires pictured above: 0.5 mm maximum diameter

Navy will perform testing of each GM tube with ARCADES (Automated RADIAC Calibration and Diagnostic Equipment System) software at 70 R/h and 30 mR/h to ensure attainment of a Sensitivity Factor (SF), calculated within the software, in the 5.0 to 7.0 range. (The Navy uses ARCADES to acceptance test GM tubes for field use. The calculated SF is a check to confirm that the GM tube performs at the Sensitivity referenced above.)

3.2 (BPA Year 2) Following Navy testing, in the event a subsequent BPA order is issued, the contractor shall provide a quantity of up to five (5) GM tubes according to the same para. 3.1, above, characteristics and specifications.

4. Place of Performance

Material shall be packaged at Contractor facility.

Material is Free on Board (FOB) Destination:

Naval Surface Warfare Center Carderock Division

Radiation Detection Technology Branch

9500 MacArthur Boulevard

West Bethesda, MD 20817

Attn: Mark DiNezza, B157

5. Period of Performance

BPA Year 1 - Initial Order: Quantity of up to three(3) GM tubes

BPA Year 2 - Final: Quantity of up to five(5) GM tubes shall be delivered 90 days after any placed order that may occur between 180 days and 365 days after date of the established BPA.

6. Point of Contact

TBD

Requirements Establish a two year BPA for procuring prototype Gieger-Mueller (GM) tubes as an alternative to sustain fielding of the Multi-Function RADIAC (MFR) survey meter used throughout the Naval Nuclear Propulsion Program.

Continuation of Packaging and Marking

Continuation of Inspection and Acceptance

Overall Contract Inspection/Acceptance Locations

Inspection and Acceptance Location

Both Destination Instructions: Acceptance and Inspection will be conducted in accordance with contract terms and conditions.

DoDAAC: N00167 CountryCode: USA

NSWC CARDEROCK

CARDEROCK DIVISION, 9500 MACARTHUR BOULEVARD

BETHESDA, MD 20817-5700

UNITED STATES

TBD, TBD

Email: TBD Telephone: TBD

Inspection and Acceptance Location

Both Destination Instructions: Acceptance and Inspection will be conducted in accordance with contract terms and conditions.

DoDAAC: N00167 CountryCode: USA

NSWC CARDEROCK

CARDEROCK DIVISION, 9500 MACARTHUR BOULEVARD

BETHESDA, MD 20817-5700

UNITED STATES

TBD, TBD

Email: TBD Telephone: TBD

Continuation of Deliveries or Performance

Overall Contract Delivery Period

Period of Performance From 01 May 2026 to 30 Apr 2028

The ordering period above may include unexercised options

Contractor Destination

Line Item Delivery Schedule Quantity Address and POC Special Handling/Notes

Delivery Schedule From date of lead time event to delivery 180 Calendar Days Date of Award

3 Each Ship To DoDAAC: N00167 CountryCode: USA

NSWC CARDEROCK

CARDEROCK DIVISION BLDG 143, 9500

MACARTHUR BOULEVARD

BETHESDA, MD 20817-5700

UNITED STATES

TBD, TBD

Email: TBD Telephone: TBD

FoB Details Contractor Destination

Delivery Schedule From date of lead time event to delivery 180 Calendar Days Date of Award

5 Each Ship To DoDAAC: N00167 CountryCode: USA

NSWC CARDEROCK

CARDEROCK DIVISION BLDG 143, 9500

MACARTHUR BOULEVARD

BETHESDA, MD 20817-5700

UNITED STATES

TBD, TBD

Email: TBD Telephone: TBD

FoB Details Contractor Destination

Continuation of Accounting and Appropriation Data

Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements. Jan 2017 52.204-13 System for Award Management-Maintenance. (Deviation) Feb 2026 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving. May 2024 52.232-33 Payment by Electronic Funds Transfer-System for Award Management. Oct 2018 52.232-36 Payment by Third Party. (Deviation) Feb 2026 52.232-40 Providing Accelerated Payments to Small Business Subcontractors. Mar 2023 52.233-3 Protest after Award. (Deviation) Feb 2026 52.233-4 Applicable Law for Breach of Contract Claim. (Deviation) Feb 2026 52.212-4 Terms and Conditions-Commercial Products and Commercial Services. (Deviation) Feb 2026

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Dec 2022

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

Jan 2023

252.204-7022 Expediting Contract Closeout. May 2021 252.223-7008 Prohibition of Hexavalent Chromium. Jan 2023 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime. Jan 2023 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018 252.232-7009 Mandatory Payment by Governmentwide Commercial Purchase Card. May 2018 252.232-7010 Levies on Contract Payments. Dec 2006 252.247-7023 Transportation of Supplies by Sea. Oct 2024 252.239-7018 Supply Chain Risk. Dec 2022

DFARS Clauses Incorporated by Full Text

252.211-7003 Item Unique Identification and Valuation. (Jan 2023)

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) . As used in this clause- Definitions

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at . https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

" Enterprise " means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

" Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

" Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at .https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract line, subline, or exhibit line item No. Item description

See Schedule

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract line, subline, or exhibit line item No. Item description

See Schedule

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number .____

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number .____

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification.

(4) The Contractor shall ensure that- Data syntax and semantics of unique item identifiers.

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH

10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) . Unique item identifier

(i) The Contractor shall-

(A) Determine whether to-

Serialize within the enterprise identifier; (1)

Serialize within the part, lot, or batch number; or (2)

Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and (3)

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code-

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods-

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site /uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) , Unique Item Identifier Report for Embedded ____ Items, Contract Data Requirements List, DD Form 1423.

(g) . If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with Subcontracts paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial products or commercial services.

(End of clause)

252.232-7006 Wide Area WorkFlow Payment Instructions. (Jan 2023)

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) As used in this clause--Definitions.

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003 , Electronic Submission of Payment Requests and Receiving Reports.

(b) . The WAWF system provides the method to electronically process vendor payment requests and receiving Electronic invoicing reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003 , Electronic Submission of Payment Requests and Receiving Reports.

(c) . To access WAWF, the Contractor shall--WAWF access

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) . The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the WAWF training Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) . Document submissions may be via web entry, Electronic Data Interchange, or File WAWF methods of document submission Transfer Protocol.

(f) . The Contractor shall use the following information when submitting payment requests and receiving WAWF payment instructions reports in WAWF for this contract or task or delivery order:

(1) . The Contractor shall submit payment requests using the following document type(s):Document type

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items--

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

Invoice and Receiving Report (COMBO)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

Invoice and Receiving Report (COMBO)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

N0016726Q1067 https://www.acquisition.gov/dfars/252.232-7003-electronic-submission-payment-requests-and-receiving-reports.#DFARS_252.232-7003 https://www.acquisition.gov/dfars/252.232-7003-electronic-submission-payment-requests-and-receiving-reports.#DFARS_252.232-7003

Pay Official DoDAAC N62825

Issue By DoDAAC N00167

Admin DoDAAC** N00167

Inspect By DoDAAC N00167

Ship To Code N00167

Ship From Code TBD

Mark For Code ____

Service Approver (DoDAAC) ____

Service Acceptor (DoDAAC) ____

Accept at Other DoDAAC ____

LPO DoDAAC ____

DCAA Auditor DoDAAC ____

Other DoDAAC(s) ____

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216- 7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

Technical questions Ademola Oriowo 301-503-0809 email ademola.m.oriowo.civ@us.navy.mil

Invoice questions TBD at Contract Award

NAVSEA Helpdesk at usn.ncr.sea-01.mbx.wawf-hq-functional-mail-box@us.navy.mil

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Addendum to 52.212-4, Contract Terms and Conditions - Commercial Products and Commercial Services

Contract Terms and Conditions Required To Implement Statutes or Executive Orders — Commercial Products and Commercial Services

Addendum to Contract Clauses

Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations. (Deviation) Feb 2026 52.223-5 Pollution Prevention and Right-to-Know Information. May 2024 52.240-91 Security Prohibitions and Exclusions. (Deviation) Feb 2026 52.244-6 Subcontracts for Commercial Products and Commercial Services. (Deviation) Feb 2026 52.204-19 Incorporation by Reference of Representations and Certifications. Dec 2014 52.232-39 Unenforceability of Unauthorized Obligations. Jun 2013 52.203-12 Limitation on Payments to Influence Certain Federal Transactions. Jun 2020 52.247-34 F.o.b. Destination. Jan 1991 52.204-91 Contractor Identification. (Deviation) Feb 2026

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.225-7002 Qualifying Country Sources as Subcontractors. Mar 2022

252.225-7036 Buy American-Free Trade Agreements--Balance of Payments Program.

(Alternate I)

Feb 2024 Alternate I Feb 2024

252.233-7001 Choice of Law (Overseas). Jun 1997 252.225-7048 Export-Controlled Items. Jun 2013 252.243-7001 Pricing of Contract Modifications. Dec 1991 252.225-7013 Duty-Free Entry. Aug 2025

252.225-7972 Prohibition on the Procurement of Foreign-Made Unmanned Aircraft Systems. (DEVIATION 2024-O0014)

Aug 2024 Deviation 2024-O0014 Aug 2024

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting.

(DEVIATION 2024-O0013 REVISION 1)

May 2024 Deviation 2024-O0013 May 2024

FAR Clauses Incorporated by Full Text

52.252-2 Clauses Incorporated by Reference. (Feb 1998)

CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

____ [Insert one or more Internet addresses]____ ____

(End of clause)

52.252-6 Authorized Deviations in Clauses. (Nov 2020)

AUTHORIZED DEVIATIONS IN CLAUSES (NOV 2020)

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.

(b) The use in this solicitation or contract of any [insert regulation name] (48 CFR ) clause with an authorized deviation is indicated by ____ ____ the addition of "(DEVIATION)" after the name of the regulation.

(End of clause)

52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Products and Commercial Services.

(DEVIATION 2025-O0003 and 2025-O0004)

(Mar 2025) Deviation 2025-O0004 (Mar 2025)

CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS-COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (MAR 2025) (DEVIATION 2025-O0003 AND 2025-O0004)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (section 743 of Division E, Title (JAN 2017) VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (DEC (Section 1634 of Pub. L. 115-91).2023)

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Section (NOV 2021) 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations .(NOV 2015)

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (31 U.S.C. 3903 and 10 U.S.C. 3801).(MAR 2023)

(6) 52.233-3, Protest After Award (31 U.S.C. 3553).(AUG 1996)

(7) 52.233-4, Applicable Law for Breach of Contract Claim (Public Laws 108-77 and 108-78 ( 19 U.S.C. 3805 note)).(OCT 2004)

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[ .]Contracting Officer check as appropriate

52.203-6, Restrictions on Subcontractor Sales to the Government with (41 U.S.C. 4704 and 10 U.S.C. (1) (JUN 2020), Alternate I (NOV 2021) 4655).

52.203-13, Contractor Code of Business Ethics and Conduct (41 U.S.C. 3509)).(2) (NOV 2021)

52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Section 1553 of Pub. L. 111-(3) (JUN 2010) 5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

52.203-17, Contractor Employee Whistleblower Rights (41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, (4) (NOV 2023) the Coast Guard, or applicable elements of the intelligence community-see FAR 3.900(a).

52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Pub. L. 109-282) ( 31 U.S.C. 6101 note).(5) (JUN 2020)

[Reserved].(6)

52.204-14, Service Contract Reporting Requirements (Pub. L. 111-117, section 743 of Div. C).(7) (OCT 2016)

52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Pub. L. 111-117, section 743 of Div. C).(8) (OCT 2016)

52.204-27, Prohibition on a ByteDance Covered Application (Section 102 of Division R of Pub. L. 117-328).(9) (JUN 2023)

52.204-28, Federal Acquisition Supply Chain Security Act Orders-Federal Supply Schedules, Governmentwide Acquisition Contracts, and (10) Multi-Agency Contracts. (Pub. L. 115-390, title II).(DEC 2023)

(11)

52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition. (Pub. L. 115-390, title II).(i) (DEC 2023)

Alternate I of 52.204-30.(ii) (DEC 2023)

(12) 52.209-6, Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. ( 2025) (31 U.S.C. 6101 note).JAN

52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (41 U.S.C. 2313).(13) (OCT 2018)

[Reserved].(14)

52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award ( ) (15 U.S.C. 657a).(15) OCT 2022

52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns ( ) (if the offeror elects to waive the (16) OCT 2022 preference, it shall so indicate in its offer) (15 U.S.C. 657a).

[Reserved](17)

(18)

52.219-6, Notice of Total Small Business Set-Aside (15 U.S.C. 644).(i) (NOV 2020)

Alternate I of 52.219-6.(ii) (MAR 2020)

(19)

52.219-7, Notice of Partial Small Business Set-Aside (15 U.S.C. 644).(i) (NOV 2020)

Alternate I of 52.219-7.(ii) (MAR 2020)

52.219-8, Utilization of Small Business Concerns (15 U.S.C. 637(d)(2) and (3)).(20) ( )JAN 2025

(21)

52.219-9, Small Business Subcontracting Plan (15 U.S.C. 637(d)(4)).(i) ( )JAN 2025

Alternate I of 52.219-9.(ii) (NOV 2016)

Alternate II of 52.219-9.(iii) (NOV 2016)

Alternate III of 52.219-9.(iv) (JUN 2020)

Alternate IV of 52.219-9.(v) ( )JAN 2025

(22)

52.219-13, Notice of Set-Aside of Orders (15 U.S.C. 644(r)).(i) (MAR 2020)

Alternate I of 52.219-13.(ii) (MAR 2020)

52.219-14, Limitations on Subcontracting ( ) (15 U.S.C. 657s).(23) OCT 2022

52.219-16, Liquidated Damages-Subcontracting Plan (15 U.S.C. 637(d)(4)(F)(i)).(24) (SEP 2021)

52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran-Owned Small Business (SDVOSB) Concerns (25) Eligible Under the SDVOSB Program ( ) (15 U.S.C. 657f).FEB 2024

(26)

52.219-28, Small Business Program Rerepresentation (15 U.S.C. 632(a)(2)).(i) Postaward ( )JAN 2025

Alternate I of 52.219-28.(ii) (MAR 2020)

52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns ((27) OCT ) (15 U.S.C. 637(m)).2022

52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned (28) Small Business Program ( ) (15 U.S.C. 637(m)).OCT 2022

52.219-32, Orders Issued Directly Under Small Business Reserves (15 U.S.C. 644(r)).(29) (MAR 2020)

52.219-33, Nonmanufacturer Rule (15 U.S.C. 637(a)(17)).(30) (SEP 2021)

52.222-3, Convict Labor (E.O.11755).(31) (JUN 2003)

(32) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (E.O. 13126).(JAN 2025)

[Reserved](33)

[Reserved](34)

(35)

52.222-35, Equal Opportunity for Veterans (38 U.S.C. 4212).(i) (JUN 2020)

Alternate I of 52.222-35.(ii) (JUL 2014)

(36)

52.222-36, Equal Opportunity for Workers with Disabilities (29 U.S.C. 793).(i) (JUN 2020)

Alternate I of 52.222-36.(ii) (JUL 2014)

52.222-37, Employment Reports on Veterans ( ) (38 U.S.C. 4212).(37) JUN 2020

52.222-40, Notification of Employee Rights Under the National Labor Relations Act (E.O. 13496).(38) (DEC 2010)

(39)

52.222-50, Combating Trafficking in Persons (22 U.S.C. chapter 78 and E.O. 13627).(i) (NOV 2021)

Alternate I of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).(ii) (MAR 2015)

(40) 52.222-54, Employment Eligibility Verification (Executive Order 12989). (Not applicable to the acquisition of commercially (JAN 2025) available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

(41)

52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not (i) applicable to the acquisition of commercially available off-the-shelf items.)

Alternate I of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf (ii) (MAY 2008) items.)

52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (42 U.S.C. 7671, ).(42) (MAY 2024) et seq.

52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (42 U.S.C. 7671, (43) (MAY 2024) et seq.

52.223-20, Aerosols (42 U.S.C. 7671, ).(44) (MAY 2024) et seq.

52.223-21, Foams (42 U.S.C. 7671, ).(45) (MAY 2024) et seq.

52.223-23, Sustainable Products and Services (MAR 2025) (DEVIATION 2025-O0004)) (7 U.S.C. 8102, 42 U.S.C. 6962, 42 U.S.C. 8259b, (46) and 42 U.S.C. 7671l).

(47)

52.224-3 Privacy Training (5 U.S.C. 552 a).(i) (JAN 2017)

Alternate I of 52.224-3.(ii) (JAN 2017)

(48)

52.225-1, Buy American-Supplies (41 U.S.C. chapter 83).(i) (OCT 2022)

Alternate I of 52.225-1.(ii) (OCT 2022)

(49)

52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, (i) (NOV 2023)

19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

Alternate I [Reserved].(ii)

Alternate II of 52.225-3.(iii) (JAN 2025)

Alternate III of 52.225-3.(iv) (FEB 2024)

Alternate IV (Oct 2022) of 52.225-3.(v)

52.225-5, Trade Agreements (19 U.S.C. 2501, ., 19 U.S.C. 3301 note).(50) (NOV 2023) et seq

52.225-13, Restrictions on Certain Foreign Purchases (E.O.'s, proclamations, and statutes administered by the Office of Foreign (51) (FEB 2021) Assets Control of the Department of the Treasury).

52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the (52) National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).(53)

52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (42 U.S.C. 5150).(54) (NOV 2007)

52.226-8, Encouraging Contractor Policies to Ban Text Messaging While Driving (E.O. 13513).(55) (MAY 2024)

52.229-12, Tax on Certain Foreign Procurements .(56) (FEB 2021)

52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (41 U.S.C. 4505, 10 U.S.C. (57) (NOV 2021) 3805).

52.232-30, Installment Payments for Commercial Products and Commercial Services (41 U.S.C. 4505, 10 U.S.C. 3805).(58) (NOV 2021)

52.232-33, Payment by Electronic Funds Transfer-System for Award Management (31 U.S.C. 3332).(59) (OCT2018)

52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31 U.S.C. 3332).(60)

52.232-36, Payment by Third Party (31 U.S.C. 3332).(61) (MAY 2014)

52.239-1, Privacy or Security Safeguards (5 U.S.C. 552a).(62) (AUG 1996)

52.240-1, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign (63) Entities (Sections 1821-1826, Pub. L. 118-31, 41 U.S.C. 3901 note prec.).(NOV 2024)

52.242-5, Payments to Small Business Subcontractors (15 U.S.C. 637(d)(13)).(64) (JAN 2017)

(65)

52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (46 U.S.C. 55305 and 10 U.S.C. 2631).(i) (NOV 2021)

Alternate I of 52.247-64.(ii) (APR 2003)

Alternate II of 52.247-64.(iii) (NOV 2021)

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[ ]Contracting Officer check as appropriate.

52.222-41, Service Contract Labor Standards (41 U.S.C. chapter67).(1) (AUG 2018)

52.222-42, Statement of Equivalent Rates for Federal Hires (29 U.S.C. 206 and 41 U.S.C. chapter 67).(2) (MAY 2014)

52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (3) (AUG (29 U.S.C. 206 and 41 U.S.C. chapter 67).2018)

52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May 2014) ( 29U.S.C.206 and 41 U.S.(4) C. chapter 67).

52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of (5) Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (6) (MAY 2014) (41 U.S.C. chapter 67).

52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 .(7) (JAN 2022)

52.222-62, Paid Sick Leave Under Executive Order 13706 (E.O. 13706).(8) (JAN 2022)

52.226-6, Promoting Excess Food Donation…