REQUEST FOR QUOTATION

(THIS IS NOT AN ORDER)

THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

15. DATE OF QUOTATION

16. SIGNER

a. NAME (Type or print)

c. TITLE (Type or print)

b. TELEPHONE

AREA CODE

NUMBER

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not usable

8. TO:

b. COMPANYa. NAME

c. STREET ADDRESS

d. CITY e. STATE f. ZIP CODE

9. DESTINATION

a. NAME OF CONSIGNEE

b. STREET ADDRESS

c. CITY

d. STATE e. ZIP CODE

7. DELIVERY

FOB DESTINATION

OTHER

(See Schedule)

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5a ON OR BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5a. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or service. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotation must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State and local taxes)

ITEM NO.

(a)

SUPPLIES/ SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e)

AMOUNT

(f)

12. DISCOUNT FOR PROMPT PAYMENT

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%) d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

b. STREET ADDRESS

c. COUNTY

d. CITY e. STATE f. ZIP CODE

14. SIGNATURE OF PERSON AUTHORIZED TO

SIGN QUOTATION

PAGE OF PAGES

1. REQUEST NO. 2. DATE ISSUED 3. REQUISITION/PURCHASE REQUEST NO. 4. CERT. FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

RATING

5a. ISSUED BY 6. DELIVER BY (Date)

5b. FOR INFORMATION CALL (NO COLLECT CALLS)

NAME TELEPHONE NUMBER

AREA CODE NUMBER

Section A - Solicitation/Contract Form

Drone & Autonomous Systems Training

N0016426Q0146

Section B - Supplies or Services & Prices or Costs

Additional Information/Notes

Interested Vendors must have an active CMMC Level 1 (self) certification at time of award.

Technical Evaluation Criteria located on page 37-38

Allowed Per Order Maximum: 350,000.00 Dollars, U.S.

Government Minimum/Maximum to Order Maximum: 500,000.00 Dollars, U.S.

Item Supplies/Service Quantity Unit Unit Price Amount

Autonomous Drone and Systems Training IAW SOW.

All training will be conducted in person at Government provided facilities.

Anticipate 3 to 5 trainings per FY. Each training will be awarded as an exercise option with specific course details of the training and class size to be completed at time of award.

Period of Performance: Date of award through 09/30/2030

Pricing Arrangement: Firm Fixed Price

Lot

Option Line Item

0001AA

Autonomous Drone and Systems Training IAW SOW.

All training will be conducted in person at Government provided facilities.

Term of use: This option can be exercised one time during the Period of Performance: date of award through 09/30 /2026. Specific course and class size to be detailed at time of exercise option.

1 Lot

Option Line Item

0001AB

Autonomous Drone and Systems Training IAW SOW.

All training will be conducted in person at Government provided facilities.

Term of use: This option can be exercised one time during the Period of Performance: date of award through 09/30 /2026. Specific course and class size to be detailed at time of exercise option.

1 Lot

Option Line Item

0001AC

Autonomous Drone and Systems Training IAW SOW.

All training will be conducted in person at Government provided facilities.

1 Lot

Term of use: This option can be exercised one time during the Period of Performance: 10/1/2026 through 09/30/2027.

Specific course and class size to be detailed at time of exercise option.

Option Line Item

0001AD

Autonomous Drone and Systems Training IAW SOW.

All training will be conducted in person at Government provided facilities.

Term of use: This option can be exercised one time during the Period of Performance: 10/01/2026 through 09/30/2027.

Specific course and class size to be detailed at time of exercise option.

1 Lot

Option Line Item

0001AE

Autonomous Drone and Systems Training IAW SOW.

All training will be conducted in person at Government provided facilities.

Term of use: This option can be exercised one time during the Period of Performance: 10/1/2026 through 09/30/2027.

Specific course and class size to be detailed at time of exercise option.

1 Lot

Option Line Item

0001AF

Autonomous Drone and Systems Training IAW SOW.

All training will be conducted in person at Government provided facilities.

Term of use: This option can be exercised one time during the Period of Performance: 10/1/2026 through 09/30/2027.

Specific course and class size to be detailed at time of exercise option.

1 Lot

Option Line Item

0001AG

Autonomous Drone and Systems Training IAW SOW.

All training will be conducted in person at Government provided facilities.

Term of use: This option can be exercised one time during the Period of Performance: 10/1/2026 through 09/30/2027.

Specific course and class size to be detailed at time of exercise option.

1 Lot

Option Line Item

0001AH

Autonomous Drone and Systems Training IAW SOW.

All training will be conducted in person at Government provided facilities.

Term of use: This option can be exercised one time during the Period of Performance: 10/1/2027 through 09/30/2028.

Specific course and class size to be detailed at time of exercise option.

1 Lot

Option Line Item

0001AJ

Autonomous Drone and Systems Training IAW SOW.

All training will be conducted in person at Government provided facilities.

1 Lot the Period of Performance: 10/1/2027 through 09/30/2028.

Specific course and class size to be detailed at time of exercise option.

Option Line Item

0001AK

Autonomous Drone and Systems Training IAW SOW.

All training will be conducted in person at Government provided facilities.

Term of use: This option can be exercised one time during the Period of Performance: 10/1/2027 through 09/30/2028.

Specific course and class size to be detailed at time of exercise option.

1 Lot

Option Line Item

0001AL

Autonomous Drone and Systems Training IAW SOW.

All training will be conducted in person at Government provided facilities.

Term of use: This option can be exercised one time during the Period of Performance: 10/1/2027 through 09/30/2028.

Specific course and class size to be detailed at time of exercise option.

1 Lot

Option Line Item

0001AM

Autonomous Drone and Systems Training IAW SOW.

All training will be conducted in person at Government provided facilities.

Term of use: This option can be exercised one time during the Period of Performance: 10/1/2027 through 09/30/2028.

Specific course and class size to be detailed at time of exercise option.

1 Lot

Option Line Item

0001AN

Autonomous Drone and Systems Training IAW SOW.

All training will be conducted in person at Government provided facilities.

Term of use: This option can be exercised one time during the Period of Performance: 10/1/2028 through 09/30/2029.

Specific course and class size to be detailed at time of exercise option.

1 Lot

Option Line Item

0001AP

Autonomous Drone and Systems Training IAW SOW.

All training will be conducted in person at Government provided facilities.

Term of use: This option can be exercised one time during the Period of Performance: 10/1/2028 through 09/30/2029.

Specific course and class size to be detailed at time of exercise option.

1 Lot

Option Line Item

0001AQ

Autonomous Drone and Systems Training IAW SOW.

All training will be conducted in person at Government provided facilities.

1 Lot the Period of Performance: 10/1/2028 through 09/30/2029.

Specific course and class size to be detailed at time of exercise option.

Option Line Item

0001AR

Autonomous Drone and Systems Training IAW SOW.

All training will be conducted in person at Government provided facilities.

Term of use: This option can be exercised one time during the Period of Performance: 10/1/2028 through 09/30/2029.

Specific course and class size to be detailed at time of exercise option.

1 Lot

Option Line Item

0001AS

Autonomous Drone and Systems Training IAW SOW.

All training will be conducted in person at Government provided facilities.

Term of use: This option can be exercised one time during the Period of Performance: 10/1/2028 through 09/30/2029.

Specific course and class size to be detailed at time of exercise option.

1 Lot

Option Line Item

0001AT

Autonomous Drone and Systems Training IAW SOW.

All training will be conducted in person at Government provided facilities.

Term of use: This option can be exercised one time during the Period of Performance: 10/1/2029 through 09/30/2030.

Specific course and class size to be detailed at time of exercise option.

1 Lot

Option Line Item

0001AU

Autonomous Drone and Systems Training IAW SOW.

All training will be conducted in person at Government provided facilities.

Term of use: This option can be exercised one time during the Period of Performance: 10/1/2029 through 09/30/2030.

Specific course and class size to be detailed at time of exercise option.

1 Lot

Option Line Item

0001AV

Autonomous Drone and Systems Training IAW SOW.

All training will be conducted in person at Government provided facilities.

Term of use: This option can be exercised one time during the Period of Performance: 10/1/2029 through 09/30/2030.

Specific course and class size to be detailed at time of exercise option.

1 Lot

Option Line Item

0001AW

Autonomous Drone and Systems Training IAW SOW.

All training will be conducted in person at Government provided facilities.

1 Lot the Period of Performance: 10/1/2029 through 09/30/2030.

Specific course and class size to be detailed at time of exercise option.

Option Line Item

0001AX

Autonomous Drone and Systems Training IAW SOW.

All training will be conducted in person at Government provided facilities.

Term of use: This option can be exercised one time during the Period of Performance: 10/1/2029 through 09/30/2030.

Specific course and class size to be detailed at time of exercise option.

1 Lot

Section C - Description/Specifications/Statement of Work

Requirements

CR-101-0017

Section D - Packaging and Marking

Section E - Inspection and Acceptance

Section F - Deliveries or Performance

Overall Contract Delivery Period

Period of Performance From 15 Jun 2026 to 30 Sep 2026

The ordering period above may include unexercised options

Contractor Destination

Line Item Delivery Schedule Quantity Address and POC

Option Line Item

0001AA

Delivery Period From 15 Jun 2026 to 30 Sep 2026

1 Lot Service Performance Site DoDAAC: N00164 CountryCode: USA

NSWC CRANE

WARFARE CENTER, 300 HIGHWAY 361

CRANE, IN 47522-5001

UNITED STATES

Heather Strange, Workforce Development Email: heather.e.strange3.civ@us.navy.mil Telephone: 812-227-9737

Option Line Item

0001AB

Delivery Period From 15 Jun 2026 to 30 Sep 2026

1 Lot Service Performance Site DoDAAC: N00164 CountryCode: USA

NSWC CRANE

WARFARE CENTER, 300 HIGHWAY 361

CRANE, IN 47522-5001

UNITED STATES

Heather Strange, Workforce Development Email: heather.e.strange3.civ@us.navy.mil Telephone: 812-227-9737

Option Line Item

0001AC

Delivery Period From 01 Oct 2026 to 30 Sep 2027

1 Lot Service Performance Site DoDAAC: N00164 CountryCode: USA

NSWC CRANE

WARFARE CENTER, 300 HIGHWAY 361

CRANE, IN 47522-5001

UNITED STATES

Heather Strange, Workforce Development Email: heather.e.strange3.civ@us.navy.mil Telephone: 812-227-9737

Delivery Period From 01 Oct 2026 to 30 Sep 2027

1 Lot Service Performance Site DoDAAC: N00164 CountryCode: USA

NSWC CRANE

Option Line Item

0001AD

WARFARE CENTER, 300 HIGHWAY 361

CRANE, IN 47522-5001

UNITED STATES

Heather Strange, Workforce Development Email: heather.e.strange3.civ@us.navy.mil Telephone: 812-227-9737

Option Line Item

0001AE

Delivery Period From 01 Oct 2026 to 30 Sep 2027

1 Lot Service Performance Site DoDAAC: N00164 CountryCode: USA

NSWC CRANE

WARFARE CENTER, 300 HIGHWAY 361

CRANE, IN 47522-5001

UNITED STATES

Heather Strange, Workforce Development Email: heather.e.strange3.civ@us.navy.mil Telephone: 812-227-9737

Option Line Item

0001AF

Delivery Period From 01 Oct 2026 to 30 Sep 2027

1 Lot Service Performance Site DoDAAC: N00164 CountryCode: USA

NSWC CRANE

WARFARE CENTER, 300 HIGHWAY 361

CRANE, IN 47522-5001

UNITED STATES

Heather Strange, Workforce Development Email: heather.e.strange3.civ@us.navy.mil Telephone: 812-227-9737

Option Line Item

0001AG

Delivery Period From 01 Oct 2026 to 30 Sep 2027

1 Lot Service Performance Site DoDAAC: N00164 CountryCode: USA

NSWC CRANE

WARFARE CENTER, 300 HIGHWAY 361

CRANE, IN 47522-5001

UNITED STATES

Heather Strange, Workforce Development Email: heather.e.strange3.civ@us.navy.mil Telephone: 812-227-9737

Option Line Item

0001AH

Delivery Period From 01 Oct 2027 to 30 Sep 2028

1 Lot Service Performance Site DoDAAC: N00164 CountryCode: USA

NSWC CRANE

WARFARE CENTER, 300 HIGHWAY 361

CRANE, IN 47522-5001

UNITED STATES

Heather Strange, Workforce Development Email: heather.e.strange3.civ@us.navy.mil Telephone: 812-227-9737

Delivery Period From 01 Oct 2027 to 30 Sep 2028

1 Lot Service Performance Site DoDAAC: N00164 CountryCode: USA

NSWC CRANE

WARFARE CENTER, 300 HIGHWAY 361

CRANE, IN 47522-5001

0001AJ

UNITED STATES

Heather Strange, Workforce Development Email: heather.e.strange3.civ@us.navy.mil Telephone: 812-227-9737

Option Line Item

0001AK

Delivery Period From 01 Oct 2027 to 30 Sep 2028

1 Lot Service Performance Site DoDAAC: N00164 CountryCode: USA

NSWC CRANE

WARFARE CENTER, 300 HIGHWAY 361

CRANE, IN 47522-5001

UNITED STATES

Heather Strange, Workforce Development Email: heather.e.strange3.civ@us.navy.mil Telephone: 812-227-9737

Option Line Item

0001AL

Delivery Period From 01 Oct 2027 to 30 Sep 2028

1 Lot Service Performance Site DoDAAC: N00164 CountryCode: USA

NSWC CRANE

WARFARE CENTER, 300 HIGHWAY 361

CRANE, IN 47522-5001

UNITED STATES

Heather Strange, Workforce Development Email: heather.e.strange3.civ@us.navy.mil Telephone: 812-227-9737

Option Line Item

0001AM

Delivery Period From 01 Oct 2027 to 30 Sep 2028

1 Lot Service Performance Site DoDAAC: N00164 CountryCode: USA

NSWC CRANE

WARFARE CENTER, 300 HIGHWAY 361

CRANE, IN 47522-5001

UNITED STATES

Heather Strange, Workforce Development Email: heather.e.strange3.civ@us.navy.mil Telephone: 812-227-9737

Option Line Item

0001AN

Delivery Period From 01 Oct 2028 to 30 Sep 2029

1 Lot Service Performance Site DoDAAC: N00164 CountryCode: USA

NSWC CRANE

WARFARE CENTER, 300 HIGHWAY 361

CRANE, IN 47522-5001

UNITED STATES

Heather Strange, Workforce Development Email: heather.e.strange3.civ@us.navy.mil Telephone: 812-227-9737

Option Line Item

0001AP

Delivery Period From 01 Oct 2028 to 30 Sep 2029

1 Lot Service Performance Site DoDAAC: N00164 CountryCode: USA

NSWC CRANE

WARFARE CENTER, 300 HIGHWAY 361

CRANE, IN 47522-5001

UNITED STATES

Heather Strange, Workforce Development Email: heather.e.strange3.civ@us.navy.mil Telephone: 812-227-9737

Option Line Item

0001AQ

Delivery Period From 01 Oct 2028 to 30 Sep 2029

1 Lot Service Performance Site DoDAAC: N00164 CountryCode: USA

NSWC CRANE

WARFARE CENTER, 300 HIGHWAY 361

CRANE, IN 47522-5001

UNITED STATES

Heather Strange, Workforce Development Email: heather.e.strange3.civ@us.navy.mil Telephone: 812-227-9737

Option Line Item

0001AR

Delivery Period From 01 Oct 2028 to 30 Sep 2029

1 Lot Service Performance Site DoDAAC: N00164 CountryCode: USA

NSWC CRANE

WARFARE CENTER, 300 HIGHWAY 361

CRANE, IN 47522-5001

UNITED STATES

Heather Strange, Workforce Development Email: heather.e.strange3.civ@us.navy.mil Telephone: 812-227-9737

Option Line Item

0001AS

Delivery Period From 01 Oct 2028 to 30 Sep 2029

1 Lot Service Performance Site DoDAAC: N00164 CountryCode: USA

NSWC CRANE

WARFARE CENTER, 300 HIGHWAY 361

CRANE, IN 47522-5001

UNITED STATES

Heather Strange, Workforce Development Email: heather.e.strange3.civ@us.navy.mil Telephone: 812-227-9737

Option Line Item

0001AT

Delivery Period From 01 Oct 2029 to 30 Sep 2030

1 Lot Service Performance Site DoDAAC: N00164 CountryCode: USA

NSWC CRANE

WARFARE CENTER, 300 HIGHWAY 361

CRANE, IN 47522-5001

UNITED STATES

Heather Strange, Workforce Development Email: heather.e.strange3.civ@us.navy.mil Telephone: 812-227-9737

Option Line Item

0001AU

Delivery Period From 01 Oct 2029 to 30 Sep 2030

1 Lot Service Performance Site DoDAAC: N00164 CountryCode: USA

NSWC CRANE

WARFARE CENTER, 300 HIGHWAY 361

CRANE, IN 47522-5001

UNITED STATES

Heather Strange, Workforce Development Email: heather.e.strange3.civ@us.navy.mil

Telephone: 812-227-9737

0001AV

Delivery Period From 01 Oct 2029 to 30 Sep 2030

1 Lot Service Performance Site DoDAAC: N00164 CountryCode: USA

NSWC CRANE

WARFARE CENTER, 300 HIGHWAY 361

CRANE, IN 47522-5001

UNITED STATES

Heather Strange, Workforce Development Email: heather.e.strange3.civ@us.navy.mil Telephone: 812-227-9737

Option Line Item

0001AW

Delivery Period From 01 Oct 2029 to 30 Sep 2030

1 Lot Service Performance Site DoDAAC: N00164 CountryCode: USA

NSWC CRANE

WARFARE CENTER, 300 HIGHWAY 361

CRANE, IN 47522-5001

UNITED STATES

Heather Strange, Workforce Development Email: heather.e.strange3.civ@us.navy.mil Telephone: 812-227-9737

Option Line Item

0001AX

Delivery Period From 01 Oct 2029 to 30 Sep 2030

1 Lot Service Performance Site DoDAAC: N00164 CountryCode: USA

NSWC CRANE

WARFARE CENTER, 300 HIGHWAY 361

CRANE, IN 47522-5001

UNITED STATES

Heather Strange, Workforce Development Email: heather.e.strange3.civ@us.navy.mil Telephone: 812-227-9737

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.242-15 Stop-Work Order. Aug 1989 52.247-34 F.o.b. Destination. Jan 1991

Section G - Contract Administration Data

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018

DFARS Clauses Incorporated by Full Text

252.232-7006 Wide Area WorkFlow Payment Instructions. (Jan 2023)

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) As used in this clause- Definitions.

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as Electronic invoicing.

authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) To access WAWF, the Contractor shall- WAWF access.

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice WAWF training.

Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) Document submissions may be via web entry, Electronic Data Interchange, or File Transfer WAWF methods of document submission.

Protocol.

(f) The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF payment instructions.

WAWF for this contract or task or delivery order:

(1) The Contractor shall submit payment requests using the following document type(s): Document type.

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

____Invoice 2-in-1

(Contracting Officer: Insert either "Invoice 2in1" or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF Document routing.

when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC N68732

Issue By DoDAAC N00164

Admin DoDAAC N00164

Inspect By DoDAAC N00164

Ship To Code ____

Ship From Code ____

Mark For Code ____

Service Approver (DoDAAC) ____

Service Acceptor (DoDAAC) N00164

Accept at Other DoDAAC ____

LPO DoDAAC N00164

DCAA Auditor DoDAAC ____

Other DoDAAC(s) ____

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.")

(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in Payment request.

accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F. Receiving report.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

Send additional notifications to: heather.e.strange3.civ@us.navy.mil

For invoicing questions: usn.crane.nswc-cd-crane-in.mbx.cranacquisitnwawf@us.navy.mil

(Contracting Officer: Insert applicable information or "Not applicable.")

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Additional Regulation or Supplemental Clauses Incorporated by Full Text

G-232-H005 SUPPLEMENTAL INSTRUCTIONS REGARDING INVOICING (NAVSEA) (JAN

2019)

(Jan 2019)

(a) For other than firm fixed priced contract line item numbers (CLINs), the Contractor agrees to segregate costs incurred under this contract/task order (TO), as applicable, at the lowest level of performance, either at the sub line item number (SLIN) or CLIN level, rather than at the total contract/TO level, and to submit invoices reflecting costs incurred at that level. Supporting documentation in Wide Area Workflow (WAWF) for invoices shall include summaries of work charged during the period covered as well as overall cumulative summaries by individual labor categories, rates, and hours (both straight time and overtime) invoiced; as well as, a cost break down of other direct costs (ODCs), materials, and travel, by technical instruction (TI), SLIN, or CLIN level. For other than firm fixed price subcontracts, subcontractors are also required to provide labor categories, rates, and hours (both straight time and overtime) invoiced; as well as, a cost breakdown of ODCs, materials, and travel invoiced. Supporting documentation may be encrypted before submission to the prime contractor for WAWF invoice submittal. Subcontractors may email encryption code information directly to the Contracting Officer and Contracting Officer Representative (COR). Shouldthe subcontractor lack encryption capability, the subcontractor may also email detailed supporting cost information directly to the Contracting Officer and COR; or other method as agreed to by the Contracting Officer.

(b) Contractors submitting payment requests and receiving reports to WAWF using either Electronic Data Interchange (EDI) or Secure File Transfer Protocol (SFTP) shall separately send an email notification to the COR and Contracting Officer on the same date they submit the invoice in WAWF. No payments shall be due if the contractor does not provide the COR and Contracting Officer email notification as required herein.

N0016426Q0146 mailto:usn.crane.nswc-cd-crane-in.mbx.cranacquisitnwawf@us.navy.mil

(End of Text)

G-232-H002 H002 PAYMENT INSTRUCTIONS (NAVSEA) (FEB 2024) (Feb 2024)

Payment office allocation methods can be found in the table at DFARS PGI 204.7108(b)(2) (https://www.acq.osd.mil/dpap /dars/pgi/pgi_htm/current/PGI204_71.htm#payment_instructions).

(End of text)

G-242-H001 GOVERNMENT CONTRACTADMINISTRATION POINTS-OF-CONTACT AND

RESPONSIBILITIES (NAVSEA) (OCT 2023)

(Oct 2023)

(a) The Government reserves the right to administratively substitute any of the points of contact listed below at any time.

(b) The contracting officer is the only person authorized to change this contract or orders issued thereunder. The Contractor shall not comply with any order, direction or request of Government personnel - that would constitute a change - unless it is issued in writing and signed by the Contracting Officer or is pursuant to specific authority otherwise included as part of this contract. If, in the opinion of the contractor, an effort outside the existing scope of this contract is requested, the contractor shall promptly comply with the Notification of Changes clause of this contract.

(c) The points of contact are as follows:

(i) The Procuring Contracting Officer (PCO) is:

Name: Kelly Kapanzhi E-mail: kelly.l.kapanzhi.civ@us.navy.mil

(ii) The Contract Specialist is:

Name: Emily Wichman E-mail: emily.j.wichman.civ@us.navy.mil

(f) The Technical Point of Contact (TPOC) is the contracting officer's representative for technical matters when a COR is not appointed. The TPOC is responsible for technical issues of contract administration, such as providing all items of Government Furnished Information (GFI), Government Furnished Material (GFM) and Government Furnished Equipment (GFE) if specified in the contract as well as the inspection and acceptance of all contract deliverables.

The Technical Point of Contact (TPOC) is:

Name: [ * ] Address: [ *Street ] [ *City, State, Zip ] Phone: (Area Code) xxx- [xxxx] E-mail: [ * ]

(j) The Contractor's point of contact for performance under this contract is:

Name: [ * ] Address:

[ *Street ] [ *City, State, Zip ] Phone: (Area Code) xxx- [xxxx] E-mail: [ * ]

[ * ] To be completed at contract award

(End of Text)

G-242-H002 HOURS OF OPERATION AND HOLIDAY SCHEDULE (NAVSEA) (JUL 2021) (Jul 2021)

(a) The policy of this activity is to schedule periods of reduced operations or shutdown during holiday periods. Deliveries will not be accepted on Saturdays, Sundays or Holidays except as specifically requested by the [insert activity name]. All goods or services attempted to be delivered on a Saturday, Sunday or Holiday without specific instructions from the Contracting Officer or his duly appointed representative will be returned to the contractor at the contractor's expense with no cost or liability to the U.

S. Government.

(b) The federal Government observes public Holidays that have been established under 5 U.S.C. 6103. The actual date of observance for each of the holidays, for a specific calendar year, may be obtained from the OPM website at OPM.GOV or by using the following direct link: https://www.opm.gov/policy-data-oversight/pay-leave/federal-holidays/.

(c) Delayed Opening, Early Dismissal and Closure of Government Facilities. When a Government facility has a delayed opening, is closed or Federal employees are dismissed early (due to severe weather, security threat, security exercise, or a facility related problem) that prevents personnel from working, onsite contractor personnel regularly assigned to work at that facility shall follow the same reporting and/or departure directions given to Government personnel. The contractor shall not direct charge to the contract for such time off, but shall follow parent company policies regarding taking leave (administrative or other). Non-essential contractor personnel, who are not required to remain at or report to the facility, shall follow their parent company policy regarding whether they should go/stay home or report to another company facility. Subsequent to an early dismissal, delayed opening, or during periods of inclement weather, onsite contractors should monitor the OPM website as well as radio and television announcements before departing for work to determine if the facility is closed or operating on a delayed arrival basis.

(d) When Federal employees are excused from work due to a holiday or a special event (that is unrelated to severe weather, a security threat, or a facility related problem), on site contractors shall continue working established work hours or take leave in accordance with parent company policy. Those contractor employees who take leave shall not direct charge the non-working hours to the contract. Contractors are responsible for predetermining and disclosing their charging practices for early dismissal, delayed openings, or closings in accordance with the FAR, applicable cost accounting standards, and the company's established policy and procedures. Contractors shall follow their disclosed charging practices during the contract period of performance, and shall not follow any verbal directions to the contrary. The Contracting Officer will make the determination of cost allowability for time lost due to facility closure in accordance with FAR, applicable Cost Accounting Standards, and the Contractor's established accounting policy and procedures.

(e) If you intend to visit the Contracts Office, it is advised that you call for an appointment at least 24 hours in advance.

(f) The hours of operation are as follows:

AREA FROM TO

NSWC Crane 0600 1600

(g) All deliveries to the Receiving Officer, SEE DELIVERY SCHEDULE ,shall be made Monday through Friday from to 0600 , local time. Deliveries will not be accepted after . 1600 1600 No deliveries will be accepted on federal government holidays.

(End of Text)

G-242-W001 CONTRACT ADMINISTRATION FUNCTIONS (NAVSEA) (OCT 2018) (Oct 2018)

(a) In accordance with FAR 42.302(a) all functions listed are delegated to the ACO except the following items to be retained by the PCO:

NO EXCEPTIONS

(b) In accordance with FAR 42.302(b), the following additional functions are delegated to the ACO:

NO EXCEPTIONS

(End of Text)

N0016426Q0146 https://www.opm.gov/policy-data-oversight/pay-leave/federal-holidays/ https://www.opm.gov/policy-data-oversight/pay-leave/federal-holidays

Section H - Special Contract Requirements

Section I - Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.203-3 Gratuities. Apr 1984 52.203-5 Covenant Against Contingent Fees. May 2014 52.203-6 Restrictions on Subcontractor Sales to the Government. Jun 2020 52.203-7 Anti-Kickback Procedures. Jun 2020 52.203-8 Cancellation, Rescission, and Recovery of Funds for Illegal or Improper Activity. May 2014 52.203-10 Price or Fee Adjustment for Illegal or Improper Activity. May 2014 52.203-12 Limitation on Payments to Influence Certain Federal Transactions. Jun 2020

52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards. (Deviation 2026- O0038)

Feb 2026

52.204-13 System for Award Management-Maintenance. (Deviation 2026-O0038) Feb 2026 52.204-18 Commercial and Government Entity Code Maintenance. Aug 2020 52.204-19 Incorporation by Reference of Representations and Certifications. Dec 2014

52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (Deviation 2026-O0038)

Feb 2026

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations. (Deviation 2026- O0038)

Feb 2026

52.211-5 Material Requirements. (Deviation 2026-O0038) Feb 2026 52.211-15 Defense Priority and Allocation Requirements. Apr 2008 52.215-8 Order of Precedence-Uniform Contract Format. (Deviation 2026-O0038) Feb 2026 52.219-6 Notice of Total Small Business Set-Aside. (Deviation 2026-O0038) Feb 2026 52.222-3 Convict Labor. (Deviation 2026-O0038) Feb 2026 52.222-19 Child Labor-Cooperation with Authorities and Remedies. (Deviation 2026-O0038) Mar 2026 52.222-35 Equal Opportunity for Veterans. (Deviation 2026-O0038) Feb 2026 52.222-36 Equal Opportunity for Workers with Disabilities. (Deviation 2026-O0038) Feb 2026 52.222-37 Employment Reports on Veterans. (Deviation 2026-O0038) Feb 2026

52.222-40 Notification of Employee Rights Under the National Labor Relations Act. (Deviation 2026-O0038)

Feb 2026

52.222-41 Service Contract Labor Standards. (Deviation) Feb 2026

52.222-43 Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts). (Deviation)

Feb 2026

52.222-50 Combating Trafficking in Persons. (Deviation 2026-O0038) Feb 2026 52.222-54 Employment Eligibility Verification. (Deviation 2026-O0038) Feb 2026 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving. May 2024 52.227-1 Authorization and Consent. Jun 2020 52.227-2 Notice and Assistance Regarding Patent and Copyright Infringement. Jun 2020 52.228-7 Insurance-Liability to Third Persons. Mar 1996 52.229-3 Federal, State, and Local Taxes. Feb 2013 52.232-1 Payments. Apr 1984 52.232-11 Extras. Apr 1984 52.232-23 Assignment of Claims. May 2014 52.232-25 Prompt Payment. Jan 2017 52.232-33 Payment by Electronic Funds Transfer-System for Award Management. Oct 2018 52.232-39 Unenforceability of Unauthorized Obligations. Jun 2013 52.232-40 Providing Accelerated Payments to Small Business Subcontractors. Mar 2023 52.233-1 Disputes. (Deviation 2026-O0038) Feb 2026 52.233-3 Protest after Award. (Deviation 2026-O0038) Feb 2026 52.233-4 Applicable Law for Breach of Contract Claim. (Deviation 2026-O0038) Feb 2026 52.237-2 Protection of Government Buildings, Equipment, and Vegetation. Apr 1984 52.243-1 Changes-Fixed-Price. (Deviation 2026-O0038) (Alternate I) Feb 2026 Alternate I Feb 2026

52.244-6 Subcontracts for Commercial Products and Commercial Services. (Deviation 2026- O0038)

Apr 2026

52.249-8 Default (Fixed-Price Supply and Service). Apr 1984

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011 252.203-7001 Prohibition on Persons Convicted of Fraud or Other Defense-Contract-Related Felonies. Jan 2023 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Dec 2022

252.204-7000 Disclosure of Information. Oct 2016 252.204-7003 Control of Government Personnel Work Product. Apr 1992

252.204-7009 Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information.

Jan 2023

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting. May 2024 252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support. Jan 2023

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

Jan 2023

252.204-7022 Expediting Contract Closeout. May 2021

252.209-7004 Subcontracting with Firms that are Owned or Controlled by the Government of a Country that is a State Sponsor of Terrorism.

May 2019

252.223-7006 Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials. Sep 2014 252.223-7008 Prohibition of Hexavalent Chromium. Jan 2023

252.225-7004 Report of Intended Performance Outside the United States and Canada -Submission after Award.

Jul 2024

252.225-7012 Preference for Certain Domestic Commodities. Apr 2022 252.225-7048 Export-Controlled Items. Jun 2013 252.225-7052 Restriction on the Acquisition of Certain Magnets, Tantalum, and Tungsten. May 2024 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime. Jan 2023 252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region. Jun 2023

252.225-7061 Restriction on the Acquisition of Personal Protective Equipment and Certain Other Items from Non-Allied Foreign Nations.

Jan 2023

252.232-7010 Levies on Contract Payments. Dec 2006 252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personnel. Jan 2023 252.243-7001 Pricing of Contract Modifications. Dec 1991 252.246-7007 Contractor Counterfeit Electronic Part Detection and Avoidance System. Jan 2023 252.246-7008 Sources of Electronic Parts. Jan 2023 252.247-7023 Transportation of Supplies by Sea. Oct 2024

FAR Clauses Incorporated by Full Text

52.217-8 Option to Extend Services. (Nov 1999)

Option to Extend Services (Nov 1999)

The Government may require continued performance of any services within the limits and at the rates specified in the contract. These rates may be adjusted only as a result of revisions to prevailing labor rates provided by the Secretary of Labor. The option provision may be exercised more than once, but the total extension of performance hereunder shall not exceed 6 months. The Contracting Officer may exercise the option by written notice to the Contractor within ._10 days

(End of clause)

52.217-9 Option to Extend the Term of the Contract. (Mar 2000)

Option to Extend the Term of the Contract (Mar 2000)

(a) The Government may extend the term of this contract by written notice to the Contractor within ; provided that the Government gives the _30 Contractor a preliminary written notice of its intent to extend at least days before the contract expires. The preliminary notice does not commit __60__ the Government to an extension.

(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.

(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed (years)._5_

CLIN

Option

Quantity

Term of Use

0001AA

1 1 This option can be exercised one time during the Period of Performance: date of award through 09/30 /2026. Specific course and class size to be detailed at time of exercise option.

CLIN

0001AB

2 1 This option can be exercised one time during the Period of Performance: date of award through 09/30 /2026. Specific course and class size to be detailed at time of exercise option.

CLIN

0001AC

3 1 This option can be exercised one time during the Period of Performance: 10/1/2026 through 09/30 /2027. Specific course and class size to be detailed at time of exercise option.

0001AD

4 1 This option can be exercised one time during the Period of Performance: 10/1/2026 through 09/30 /2027. Specific course and class size to be detailed at time of exercise option.

CLIN

0001AE

5 1 This option can be exercised one time during the Period of Performance: 10/1/2026 through 09/30 /2027. Specific course and class size to be detailed at time of exercise option.

CLIN

0001AF

6 1 This option can be exercised one time during the Period of Performance: 10/1/2026 through 09/30 /2027. Specific course and class size to be detailed at time of exercise option.

CLIN

0001AG

7 1 This option can be exercised one time during the Period of Performance: 10/1/2026 through 09/30 /2027. Specific course and class size to be detailed at time of exercise option.

0001AH

8 1 This option can be exercised one time during the Period of Performance: 10/1/2027 through 09/30 /2028. Specific course and class size to be detailed at time of exercise option.

CLIN

0001AJ

9 1 This option can be exercised one time during the Period of Performance: 10/1/2027 through 09/30 /2028. Specific course and class size to be detailed at time of exercise option.

CLIN

0001AK

10 1 This option can be exercised one time during the Period of Performance: 10/1/2027 through 09/30 /2028. Specific course and class size to be detailed at time of exercise option.

CLIN

0001AL

11 1 This option can be exercised one time during the Period of Performance: 10/1/2027 through 09/30 /2028. Specific course and class size to be detailed at time of exercise option.

CLIN

0001AM

12 1 This option can be exercised one time during the Period of Performance: 10/1/2027 through 09/30 /2028. Specific course and class size to be detailed at time of exercise option.

CLIN

0001AN

13 1 This option can be exercised one time during the Period of Performance: 10/1/2028 through 09/30 /2029. Specific course and class size to be detailed at time of exercise option.

CLIN

0001AP

14 1 This option can be exercised one time during the Period of Performance: 10/1/2028 through 09/30 /2029. Specific course and class size to be detailed at time of exercise option.

CLIN

0001AQ

15 1 This option can be exercised one time during the Period of Performance: 10/1/2028 through 09/30 /2029. Specific course and class size to be detailed at time of exercise option.

CLIN

0001AR

16 1 This option can be exercised one time during the Period of Performance: 10/1/2028 through 09/30 /2029. Specific course and class size to be detailed at time of exercise option.

CLIN

0001AS

17 1 This option can be exercised one time during the Period of Performance: 10/1/2028 through 09/30 /2029. Specific course and class size to be detailed at time of exercise option.

CLIN

0001AT

18 1 This option can be exercised one time during the Period of Performance: 10/1/2029 through 09/30 /2030. Specific course and class size to be detailed at time of exercise option.

CLIN

0001AU

19 1 This option can be exercised one time during the Period of Performance: 10/1/2029 through 09/30 /2030. Specific course and class size to be detailed at time of exercise option.

CLIN

0001AV

20 1 This option can be exercised one time during the Period of Performance: 10/1/2029 through 09/30 /2030. Specific course and class size to be detailed at time of exercise option.

CLIN

0001AW

21 1 This option can be exercised one time during the Period of Performance: 10/1/2029 through 09/30 /2030. Specific course and class size to be detailed at time of exercise option.

0001AX

22 1 This option can be exercised one time during the Period of Performance: 10/1/2029 through 09/30 /2030. Specific course and class size to be detailed at time of exercise option.

(End of clause)

52.219-28 Postaward Small Business Program Rerepresentation. (Deviation) (Feb 2026)

POSTAWARD SMALL BUSINESS PROGRAM REREPRESENTATION (FEB 2026) (DEVIATION)

(a) . As used in this clause-Definitions

Long-term contract means a contract of more than five years in duration, including options. However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority.

Small business concern-

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (c) of this clause.

(2) , as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, Affiliates or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

(b) If the Contractor represented that it was a small business concern, a small disadvantaged business concern, or a joint venture that was any of the small business concerns identified in 19.000(a)(3) prior to award of this contract, the Contractor shall rerepresent its size and socioeconomic status according to paragraph (e) of this clause or, if applicable, paragraph (g) of this clause, upon occurrence of any of the following:

(1) Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause, if the novation agreement was executed prior to inclusion of this clause in the contract.

(2) Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract.

(3) For long-term contracts-

(i) Within 60 to 120 days prior to the end of the fifth year of the contract; and

(ii) Within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter.

(c) The Contractor shall rerepresent its size status in accordance with the size standard in effect at the time of this rerepresentation that corresponds to the North American Industry Classification System (NAICS) code(s) assigned to this contract. The small business size standard corresponding to this NAICS code(s) can be found at https://www.sba.gov/document/support--table-size-standards.

(d) The small business size standard for a Contractor providing an end item that it does not manufacture, process, or produce itself, for a contract other than a construction or service contract, is 500 employees, or 150 employees for information technology value-added resellers under NAICS code 541519, if the acquisition-

(1) Was set aside for small business and has a value above the simplified acquisition threshold;

(2) Used the HUBZone price evaluation preference regardless of dollar value, unless the Contractor waived the price evaluation preference; or

(3) Was an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.

(e) Except as provided in paragraph (g) of this clause, the Contractor shall make the representation(s) required by paragraph (b) of this clause by validating or updating all its representations in the Representations and Certifications section of the System for Award Management (SAM) and its other data in SAM, as necessary, to ensure that they reflect the Contractor's current status. The Contractor shall notify the contracting officer in writing within the timeframes specified in paragraph (b) of this clause, that the data have been validated or updated, and provide the date of the validation or update.

(f) If the Contractor represented that it was other than a small business concern prior to award of this contract, the Contractor may, but is not required to, take the actions required by paragraphs (e) or (g) of this clause.

(g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:

(1) The Contractor represents that it is, is not a small business concern under NAICS Code assigned to contract number.____ ____

(2) [ .] The Contractor represents Complete only if the Contractor represented itself as a small business concern in paragraph (g)(1) of this clause that it is, is not, a small disadvantaged business concern as defined in .13 CFR 124.1001

(3) . The Contractor represents that it is, is not a Women-owned small business (WOSB) joint venture eligible under the WOSB Program joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [ The Contractor shall enter the name and unique entity ____ identifier of each party to the joint venture: __.]

(4) . The Contractor represents that it is, is not a joint Economically disadvantaged women-owned small business (EDWOSB) joint venture venture that complies with the requirements of 13 CFR 127.506(a) through (c). [ The Contractor shall enter the name and unique entity identifier ____ of each party to the joint venture: __ .]

(5) . The Contractor represents that it Service-disabled veteran-owned small business (SDVOSB) joint venture eligible under the SDVOSB Program is, is not an SDVOSB joint venture eligible under the SDVOSB Program that complies with the requirements of 13 CFR 128.402. [ The ____ Contractor shall enter the name and unique entity identifier of each party to the joint venture: __.]

(6) [ ] The HUBZone joint venture eligible under the HUBZone Program. Complete only if the offeror is a HUBZone small business concern.

offeror represents, as part of its offer, that It is, is not a HUBZone joint venture that complies with the requirements of 13 CFR 126.616(a) through (c). [ The Contractor shall enter the name and unique entity identifier of each party to the joint venture: .] Each HUBZone small business ____ concern participating in the HUBZone joint venture must be certified as a HUBZone concern. [ Contractor to sign and date and insert authorized ____ signer's name and title.]

(End of clause)

52.252-2 Clauses Incorporated by Reference. (Feb 1998)

CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

____ [Insert one or more Internet addresses]____ ____

(End of clause)

52.252-6 Authorized Deviations in Clauses.