Solicitation - FA301624Q0091.pdf

502 CONS/JBKAE FA301624Q0091

JBSA Lackland, TX 78236 IAAFA Furniture

IAAFA Furniture

(The quote shall be effective 90 days after submission)

Request for Quote:

FA301624Q0091

This is a combined synopsis/solicitation for a commodity prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a separate Request for Proposal (RFP) will not be issued. The solicitation number is FA301624Q0011 and is issued as a Request for Quote (RFQ). This combined synopsis/solicitation incorporates provisions and clauses are those in effect through Federal Acquisition Circular 2024-05 and DFARS change notice 05/22/2024. This purchase is being solicited as 100% Small Business set-aside.

This NAICS code is 337121 and the size standard is 1000 employees. This requirement is for IAAFA Furniture stated below.

IAAFA Furniture

NAICS 337121

(Quotes shall be effective for 90 days)

Please respond to this RFQ by emailing your response to: A1C De’Shawn Smith (Primary Contact) at deshawn.smith.4@us.af.mil and TSgt James Salazar (secondary contact) at james.salazar.2@us.af.mil no later than 10:00AM CST, 19 Jul 2024 - Friday (or sooner if possible) in order to be considered timely.

Any and all questions will be due by 10:00 AM CST 11 Jul 2024 - Thursday. Any quote, modification, revision, or withdrawal of a quote received after the exact time specified in this solicitation shall be determined as late and will not be considered unless received before award is made, the Contracting Officer determines that accepting the late quote would not unduly delay the acquisition, and it was the only quote received. The contractor must submit a specification sheet and picture with their quote.

**Only the three lowest quotes deemed technically acceptable will be considered for evaluation for award**

(Please provide a quote for the line items listed below. Failure to quote on all CLINs will render the quote unacceptable and ineligible for award consideration in the absence of discussions.)

Please provide the information below:

Payment Terms: Delivery Date:

Company Name: Required Cage Code Number:

POC: Telephone #

E-Mail Address: Tax ID#

Warranty Information:

Do you have the ability to invoice electronically (invoicing through WAWF)?

mailto:deshawn.smith.4@us.af.mil mailto:james.salazar.2@us.af.mil mailto:lance.watters.1@us.af.mil

502 CONS/JBKAE FA301624Q0091

JBSA Lackland, TX 78236 IAAFA Furniture

Special Notes and Instructions:

1. This is a notice that this order is a 100% Small Business Set-aside. Only quotes submitted by 100% Small Business Set-aside’s holding NAICS Code 337121 and the size standard of 1000 employees will be accepted by the Government.

2. Basis for Award. 502 CONS/JBKAE will issue a purchase order to the vendor who is determined to offer the best value to the Government. Failure to acknowledge Amendments will result in your quote not being considered for award. Contract type shall be Firm Fixed Price (FFP).

3. Best Value Determination. The Offeror who is deemed responsible and responsive with the Lowest Priced, Technically Acceptable (LPTA) quote will be determined to represent the best value. Technical acceptability will be determined by an evaluation of the quoted requirements that meet the technical criteria that is contained in the solicited item description. Quotes initially will be ranked from lowest to highest based on total cost. The Government will then evaluate the three lowest priced quotes for Technical Acceptability. However, the Government reserves the right to evaluate additional quotes for technical acceptability if deemed to be in the best interest of the Government. If additional quotes are evaluated for technical acceptability, they will be evaluated in the order of total cost. Award will be made to the responsible vendor whose quote is the lowest evaluated price among technically acceptable quotes.

4. Interchanges. The government intends to award a purchase order without interchanges with respective vendors/quoters. The government, however, reserves the right to conduct interchanges if deemed in its best interest. Under appropriate circumstances, interchanges can be an effective method to improve the Government's evaluation of Offerors' quoted approaches and may reduce acquisition cycle time.

Interchanges may be written, email, phone call, etc., or any method which would accurately capture the contemporaneous sharing of information between the Government and the Offerors. Interchanges may also be oral conversations between the Government and the Offerors.

5. Mandatory Registrations. To be eligible for award, registration with the System for Award Management (SAM) must be current (legacy for On-line Registration and Certifications Application (ORCA) and Central Contractor Registration (CCR) registrations). To register or update former CCR and Reps & Certs that are not current go to https://www.sam.gov/portal/public/SAM/ and provide mandatory information.

6. Brand Name Or Equal. Details of this requirement must be met IAW attachment 1 – IAAFA Partner Nation Furniture Salient Characteristics, Dated 29 May 2024.

7. Notice to Offeror(s)/Suppliers(s). Funds are not presently available for this effort. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs.

8. Delivery/Assembly. All delivery will be performed IAW the Salient Characteristics. See Attachment 1 – IAAFA Partner Nation Furniture Salient Characteristics, Dated 29 May 2024.

9. Site Visit: There will be no site visit for this requirement.

Supplies or Services & Prices or Costs

Additional Information/Notes

Item Supplies/Service Quantity Unit Unit Price Amount

FURNITURE

Series Identifier: Furniture Product Service Code: 7105 Pricing Arrangement: Firm Fixed Price

1 Lot

DELIVERY

Series Identifier: Furniture Product Service Code: 7105 Pricing Arrangement: Firm Fixed Price

1 Lot

Description/Specifications/Statement of Work

Requirements

FY24 F64IF 4L3901 FM9 HQ PARTNER NATION INSTRUCTOR FURNITURE

Packaging and Marking

Inspection and Acceptance

Please deliver to;

IAAFA Warehouse

410 N Frank Luke Dr

San Antonio, TX 78226

The POC for the delivery driver will be TSgt Barajas. She can be reached at (210) 671-0565 and email: karina.barajas@us.af.mil.

Resource Advisor: Anita Conder, anita.conder@us.af.mil, (210) 473-4514

Overall Contract Inspection/Acceptance Locations

Inspection and Acceptance Location

Both Destination Instructions: The POC for the delivery driver will be TSgt Barajas. She can be reached at (210)-671-0565 and email: karina.

barajas@us.af.mil

Resource Advisor: Anita Conder, anita.conder@us.af.mil, (210) 473-4514.

DoDAAC: F2MT1F CountryCode: USA

IAAFA TOI

AF BPN NO MILSBILLS PROCESSES, 2431 CARSWELL AVE RM 103

LACKLAND A F B, TX 78236-5546

UNITED STATES

Karina Barajas Email: karina.barajas@us.af.mil Telephone: 210-671-0565

Inspection and Acceptance Location

Both Destination Instructions: The POC for the delivery driver will be TSgt Barajas. She can be reached at (210)-671-0565 and email: karina.

barajas@us.af.mil

Resource Advisor: Anita Conder, anita.conder@us.af.mil, (210) 473-4514.

DoDAAC: F2MT1F CountryCode: USA

IAAFA TOI

AF BPN NO MILSBILLS PROCESSES, 2431 CARSWELL AVE RM 103

LACKLAND A F B, TX 78236-5546

UNITED STATES

Karina Barajas Email: karina.barajas@us.af.mil Telephone: 210-671-0565

Deliveries or Performance

Please deliver to;

IAAFA Warehouse

410 N Frank Luke Dr

San Antonio, TX 78226

The POC for the delivery driver will be TSgt Barajas. She can be reached at (210) 671-0565 and email: karina.barajas@us.af.mil.

Resource Advisor: Anita Conder, anita.conder@us.af.mil, (210) 473-4514

Delivery Requested By Delivery Date 30 Sep 2024

Contractor Destination

Line Item Delivery Schedule Quantity Address and POC Special Handling/Notes

Delivery Requested By Delivery Date 30 Sep 2024

1 Lot Ship To DoDAAC: F2MT1F CountryCode: USA

IAAFA TOI

AF BPN NO MILSBILLS PROCESSES, 2431

CARSWELL AVE RM 103

LACKLAND A F B, TX 78236-5546

UNITED STATES

Tsgt Karina Barajas Email: karina.barajas@us.af.mil Telephone: 210-671-0565

FoB Details Contractor Destination

Delivery Requested By Delivery Date 30 Sep 2024

1 Lot Ship To DoDAAC: F2MT1F CountryCode: USA

IAAFA TOI

AF BPN NO MILSBILLS PROCESSES, 2431

CARSWELL AVE RM 103

LACKLAND A F B, TX 78236-5546

UNITED STATES

Tsgt Karina Barajas Email: karina.barajas@us.af.mil Telephone: 210-671-0565

FoB Details Contractor Destination

Contract Administration Data

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018

DFARS Clauses Incorporated by Full Text

252.232-7006 Wide Area WorkFlow Payment Instructions. (Jan 2023)

As prescribed in 232.7004(b), use the following clause:

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) As used in this clause- Definitions.

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as Electronic invoicing.

authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) To access WAWF, the Contractor shall- WAWF access.

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice WAWF training.

Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) Document submissions may be via web entry, Electronic Data Interchange, or File Transfer WAWF methods of document submission.

Protocol.

(f) The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF payment instructions.

WAWF for this contract or task or delivery order:

(1) The Contractor shall submit payment requests using the following document type(s): Document type.

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

COMBO

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

GOVERNMENT/GOVERNMENT

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF Document routing.

when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC F87700

Issue By DoDAAC FA3016

Admin DoDAAC FA3016

Inspect By DoDAAC F2MT1F

Ship To Code F2MT1F

Ship From Code N/A

Mark For Code N/A

Service Approver (DoDAAC) F2MTRD

Service Acceptor (DoDAAC) F2MTRD

Accept at Other DoDAAC N/A

LPO DoDAAC N/A

DCAA Auditor DoDAAC N/A

Other DoDAAC(s) N/A

(4) The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in Payment request.

accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F. Receiving report.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

anita.conder@us.af.mil

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Special Contract Requirements

Contract Clauses

ADDENDUMTO 52.212-2

ADDENDUMTO 52.212-2 Evaluation - Commercial Items (NOV 2021)

The following have been deleted:

(b) Options has been deleted in its entirety

(b)(iii) Past Performance has been deleted in its entirety

The following have been added or changed

FAR52.212-2 EVALUATION - COMMERICIAL ITEMS ADDENDUM

Addendum to 52.212-2(a): Paragraph (a) is tailored as follows:

(a) Basis for Award. The Government intends to award one Firm Fixed Price contract for this acquisition. Award will be made to technically acceptable Offerors who are deemed responsible in accordance with FAR 9.104 and whose quote conforms to the solicitation requirements. The solicitation requirements include all stated terms, conditions, and all other information required by this quote. Unless specifically identified in your quote, by submission of its quote, the Offeror accedes to all solicitation requirements, including terms and conditions, and technical requirements, in addition to those identified as evaluation factors. Failure to meet a requirement may result in a quote being determined ineligible for award. This contract will be awarded as Firm Fixed Price (FFP). It is the Government's intent to evaluate quotes and award without interchanges with Offerors. Therefore, the Offeror's initial quotes should contain the Offeror's best terms from a price, and technical standpoint. However, the Government reserves the right to conduct interchanges if the Contracting Officer (CO) later determines them to be necessary.

1.0 Evaluation Process. The evaluation factor and process to be used is listed below.

1.1 Evaluation Factors. In evaluating quotes, the Government will select the quote that is most advantageous to the Government.

To arrive at a decision, only the three lowest quotes will be assessed in accordance with the following evaluation factors for the award:

Technical Acceptability Price

1.1.1 Technical Evaluation. Only the three lowest quotes will be evaluated for Technical Acceptability.

(A) Acceptability Ratings. The evaluation factors listed below will be used to evaluate each quote and will

(i) Acceptable - The quote clearly meets the minimum requirements of the quote as listed in the attached Attachment 1 - IAAFA Partner Nation Instructor Furniture Salient Characteristics - Dated 29 May 2024

(ii) Unacceptable - The quote does not clearly meet the minimum requirements of this quote and its attachments.

1.1.2 Price Evaluation. Evaluations will be completed by multiplying the Offeror's unit price by the estimated quantity. An offeror's proposed TEP will be determined by multiplying the estimated quantities identified in the Schedule of Supplies by the quoted unit price for each Line Item Number (CLIN). The Government may require submission of information other than cost or pricing data to the extent necessary to evaluate price reasonableness.

1.1.2.2 Evaluation of Factors. Offerors are advised that their initial submission should be their best effort. Only technically acceptable quotes, either initially or as a result of interchanges, are eligible for award. If award is made without interchanges, quote revisions will not be permitted. The Government will evaluate the quotes selected above for technical acceptability on an

Acceptable/Unacceptable basis. For the technical quote to be rated as "Acceptable", the technical factor must be rated acceptable. If the technical factor is rated "Unacceptable" the overall quote will be rated as "Unacceptable".

(A) Interchanges. Under appropriate circumstances, interchanges can be an effective method to improve the Government's evaluation of Offerors' quoted approaches and may reduce acquisition cycle time. Interchanges may be written, email, phone call, etc., or any method which would accurately capture the contemporaneous sharing of information between the Government and the Offerors. Interchanges may also be oral conversations between the Government and the Offerors.

(B) Factor# 1 - Submit product descriptions for each item being quoted. The offeror shall submit product specifications that match, Attachment 1 - IAAFA Partner Nation Instructor Furniture Salient Characteristics - Dated 29 May 2024 . The standard has been met when: The offeror provides products that fully conform to the product description requirements specified in Attachment 1.

1.2 Technical Evaluation. If the Government receives three (3) or fewer proposals all proposals will be evaluated for Technical

Acceptability. If the Government receives more than three (3) proposal the Government will only select the three (3) lowest priced proposals and then evaluate them for Technical Acceptability. The Government reserves the right to evaluate additional proposals for technical acceptability if in the Government's best interest. if additional proposals are evaluated for technical acceptability they will be selected in the order of total evaluated price.

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.202-1 Definitions. Jun 2020 52.204-13 System for Award Management Maintenance. Oct 2018 52.204-18 Commercial and Government Entity Code Maintenance. Aug 2020 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations. Nov 2015 52.212-4 Contract Terms and Conditions-Commercial Products and Commercial Services. Nov 2023 52.223-5 Pollution Prevention and Right-to-Know Information. May 2011 52.223-6 Drug-Free Workplace. May 2001 52.229-3 Federal, State, and Local Taxes. Feb 2013 52.232-17 Interest. May 2014 52.232-18 Availability of Funds. Apr 1984 52.232-23 Assignment of Claims. May 2014 52.232-39 Unenforceability of Unauthorized Obligations. Jun 2013 52.233-1 Disputes. May 2014 52.237-2 Protection of Government Buildings, Equipment, and Vegetation. Apr 1984 52.237-3 Continuity of Services. Jan 1991 52.243-1 Changes-Fixed-Price. Aug 1987

52.243-4 Changes. Jun 2007 52.246-23 Limitation of Liability. Feb 1997 52.249-1 Termination for Convenience of the Government (Fixed-Price) (Short Form). Apr 1984 52.249-8 Default (Fixed-Price Supply and Service). Apr 1984 52.253-1 Computer Generated Forms. Jan 1991

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011 252.203-7001 Prohibition on Persons Convicted of Fraud or Other Defense-Contract-Related Felonies. Jan 2023 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Dec 2022 252.204-7004 Antiterrorism Awareness Training for Contractors. Jan 2023 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting. Jan 2023 252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support. Jan 2023

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

Jan 2023

252.209-7004 Subcontracting with Firms that are Owned or Controlled by the Government of a Country that is a State Sponsor of Terrorism.

May 2019

252.219-7011 Notification to Delay Performance. Jun 1998 252.223-7004 Drug-Free Work Force. Sep 1988 252.223-7008 Prohibition of Hexavalent Chromium. Jan 2023 252.225-7001 Buy American and Balance of Payments Program. Feb 2024 252.225-7002 Qualifying Country Sources as Subcontractors. Mar 2022 252.225-7012 Preference for Certain Domestic Commodities. Apr 2022 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime. Jan 2023 252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region. Jun 2023 252.232-7010 Levies on Contract Payments. Dec 2006 252.243-7001 Pricing of Contract Modifications. Dec 1991 252.243-7002 Requests for Equitable Adjustment. Dec 2022 252.244-7000 Subcontracts for Commercial Products or Commercial Services. Nov 2023 252.246-7008 Sources of Electronic Parts. Jan 2023 252.247-7023 Transportation of Supplies by Sea. Jan 2023

FAR Clauses Incorporated by Full Text

52.204-1 Approval of Contract. (Dec 1989)

As prescribed in , insert the following clause:4.103

Approval of Contract (Dec 1989)

This contract is subject to the written approval of and shall not be binding until so approved.TSgt James Salazar

(End of clause)

52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive Orders- Commercial Products and Commercial Services.

(Feb 2024)

As prescribed in , insert the following clause:12.301(b)(4)

Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Products and Commercial Services (Feb 2024)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (section 743 of Division E, Title VII, (Jan 2017) of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec (Section 1634 of Pub. L. 115-91).2023)

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Section 889(Nov 2021) (a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations .(Nov 2015)

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (31 U.S.C. 3903 and 10 U.S.C. 3801).(Mar 2023)

(6) 52.233-3, Protest After Award (31 U.S.C. 3553).(Aug 1996)

(7) 52.233-4, Applicable Law for Breach of Contract Claim (Public Laws 108-77 and 108-78 ( 19 U.S.C. 3805 note)).(Oct 2004)

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

52.203-6, Restrictions on Subcontractor Sales to the Government with (41 U.S.C. 4704 and 10 U.S.C. 4655).(1) (Jun 2020), Alternate I (Nov 2021)

52.203-13, Contractor Code of Business Ethics and Conduct (41 U.S.C. 3509)).(2) (Nov 2021)

52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Section 1553 of Pub. L. 111-5). (3) (Jun 2010) (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

52.203-17, Contractor Employee Whistleblower Rights (41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, the (4) (Nov 2023) Coast Guard, or applicable elements of the intelligence community-see FAR 3.900(a).

52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Pub. L. 109-282) ( 31 U.S.C. 6101 note).(5) (Jun 2020)

[Reserved].(6)

52.204-14, Service Contract Reporting Requirements (Pub. L. 111-117, section 743 of Div. C).(7) (Oct 2016)

52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Pub. L. 111-117, section 743 of Div. C).(8) (Oct 2016)

52.204-27, Prohibition on a ByteDance Covered Application (Section 102 of Division R of Pub. L. 117-328).(9) (Jun 2023)

52.204-28, Federal Acquisition Supply Chain Security Act Orders-Federal Supply Schedules, Governmentwide Acquisition Contracts, and Multi-(10) Agency Contracts. (Pub. L. 115-390, title II).(Dec 2023)

(11)

(i) 52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition. (Pub. L. 115-390, title II).(Dec 2023)

Alternate I of 52.204-30.(ii) (Dec 2023)

52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (12) (Nov (31 U.S.C. 6101 note).2021)

52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (41 U.S.C. 2313).(13) (Oct 2018)

[Reserved].(14)

52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award ( ) (15 U.S.C. 657a).(15) Oct 2022

52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns ( ) (if the offeror elects to waive the preference, (16) Oct 2022 it shall so indicate in its offer) (15 U.S.C. 657a).

[Reserved](17)

(18)

(i) 52.219-6, Notice of Total Small Business Set-Aside (15 U.S.C. 644).(Nov 2020)

Alternate I of 52.219-6.(ii) (Mar 2020)

(19)

(i) 52.219-7, Notice of Partial Small Business Set-Aside (15 U.S.C. 644).(Nov 2020)

Alternate I of 52.219-7.(ii) (Mar 2020)

52.219-8, Utilization of Small Business Concerns ( ) (15 U.S.C. 637(d)(2) and (3)).(20) Feb 2024

(21)

(i) 52.219-9, Small Business Subcontracting Plan ( ) (15 U.S.C. 637(d)(4)).Sep 2023

Alternate I of 52.219-9.(ii) (Nov 2016)

Alternate II of 52.219-9.(iii) (Nov 2016)

Alternate III of 52.219-9.(iv) (Jun 2020)

Alternate IV ( ) of 52.219-9.(v) Sep 2023

(22)

(i) 52.219-13, Notice of Set-Aside of Orders (15 U.S.C. 644(r)).(Mar 2020)

Alternate I of 52.219-13.(ii) (Mar 2020)

52.219-14, Limitations on Subcontracting ( ) (15 U.S.C. 637s).(23) Oct 2022

52.219-16, Liquidated Damages-Subcontracting Plan (15 U.S.C. 637(d)(4)(F)(i)).(24) (Sep 2021)

52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran-Owned Small Business (SDVOSB) Concerns Eligible (25) Under the SDVOSB Program ( ) (15 U.S.C. 657f).Feb 2024

(26)

(i) 52.219-28, Post Award Small Business Program Rerepresentation ( ) (15 U.S.C. 632(a)(2)).Feb 2024

Alternate I of 52.219-28.(ii) (Mar 2020)

52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns ( ) (27) Oct 2022 (15 U.S.C. 637(m)).

52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned (28) Small Business Program ( ) (15 U.S.C. 637(m)).Oct 2022

52.219-32, Orders Issued Directly Under Small Business Reserves (15 U.S.C. 644(r)).(29) (Mar 2020)

52.219-33, Nonmanufacturer Rule (15U.S.C. 637(a)(17)).(30) (Sep 2021)

52.222-3, Convict Labor (E.O.11755).(31) (Jun 2003)

52.222-19, Child Labor-Cooperation with Authorities and Remedies .(32) (Feb 2024)

52.222-21, Prohibition of Segregated Facilities .(33) (Apr 2015)

(34)

(i) 52.222-26, Equal Opportunity (E.O.11246).(Sep 2016)

Alternate I of 52.222-26.(ii) (Feb 1999)

(35)

(i) 52.222-35, Equal Opportunity for Veterans (38 U.S.C. 4212).(Jun 2020)

Alternate I of 52.222-35.(ii) (Jul 2014)

(36)

(i) 52.222-36, Equal Opportunity for Workers with Disabilities (29 U.S.C. 793).(Jun 2020)

Alternate I of 52.222-36.(ii) (Jul 2014)

52.222-37, Employment Reports on Veterans ( ) (38 U.S.C. 4212).(37) Jun 2020

52.222-40, Notification of Employee Rights Under the National Labor Relations Act (E.O. 13496).(38) (Dec 2010)

(39)

(i) 52.222-50, Combating Trafficking in Persons (22 U.S.C. chapter 78 and E.O. 13627).(Nov 2021)

Alternate I of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).(ii) (Mar 2015)

52.222-54, Employment Eligibility Verification (Executive Order 12989). (Not applicable to the acquisition of commercially (40) (May 2022) available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

(41)

(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

Alternate I of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)(ii) (May 2008)

52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Jun 2016) (E.O. 13693).(42)

52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (E.O. 13693).(43) (Jun 2016)

(44)

(i) 52.223-13, Acquisition of EPEAT(r)-Registered Imaging Equipment (E.O.s 13423 and 13514).(Jun 2014)

Alternate I of 52.223-13.(ii) (Oct 2015)

(45)

(i) 52.223-14, Acquisition of EPEAT(r)-Registered Televisions (E.O.s 13423 and 13514). (Jun 2014)

Alternate I (Jun2014) of 52.223-14.(ii)

52.223-15, Energy Efficiency in Energy-Consuming Products (42 U.S.C. 8259b).(46) (May 2020)

(47)

(i) 52.223-16, Acquisition of EPEAT(r)-Registered Personal Computer Products (E.O.s 13423 and 13514).(Oct 2015)

Alternate I of 52.223-16.(ii) (Jun 2014)

52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (E.O. 13513).(48) (Jun 2020)

52.223-20, Aerosols (E.O. 13693).(49) (Jun 2016)

52.223-21, Foams (Jun2016) (E.O. 13693).(50)

(51)

(i) 52.224-3 Privacy Training (5 U.S.C. 552 a).(Jan 2017)

Alternate I of 52.224-3.(ii) (Jan 2017)

(52)

(i) 52.225-1, Buy American-Supplies (41 U.S.C. chapter 83).(Oct 2022)

Alternate I of 52.225-1.(ii) (Oct 2022)

(53)

(i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, (NOV 2023) 19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

Alternate I [Reserved].(ii)

Alternate II of 52.225-3.(iii) ( 2022)Dec

Alternate III of 52.225-3.(iv) (Feb 2024)

Alternate IV (Oct 2022) of 52.225-3.(v)

52.225-5, Trade Agreements (19 U.S.C. 2501, ., 19 U.S.C. 3301 note).(54) (NOV 2023) et seq

52.225-13, Restrictions on Certain Foreign Purchases (E.O.'s, proclamations, and statutes administered by the Office of Foreign (55) (Feb 2021) Assets Control of the Department of the Treasury).

52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National (56) Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).(57)

52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov2007) (42 U.S.C. 5150).(58)

52.229-12, Tax on Certain Foreign Procurements .(59) (Feb 2021)

52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (41 U.S.C. 4505, 10 U.S.C. 3805).(60) (Nov 2021)

52.232-30, Installment Payments for Commercial Products and Commercial Services (41 U.S.C. 4505, 10 U.S.C. 3805).(61) (Nov 2021)

52.232-33, Payment by Electronic Funds Transfer-System for Award Management (31 U.S.C. 3332).(62) (Oct2018)

52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31 U.S.C. 3332).(63)

52.232-36, Payment by Third Party (31 U.S.C. 3332).(64) (May 2014)

52.239-1, Privacy or Security Safeguards (5 U.S.C. 552a).(65) (Aug 1996)

52.242-5, Payments to Small Business Subcontractors (15 U.S.C. 637(d)(13)).(66) (Jan 2017)

(67)

(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (46 U.S.C. 55305 and 10 U.S.C. 2631).(Nov 2021)

Alternate I of 52.247-64.(ii) (Apr 2003)

Alternate II of 52.247-64.(iii) (Nov 2021)

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

52.222-41, Service Contract Labor Standards (41 U.S.C. chapter67).(1) (Aug 2018)

52.222-42, Statement of Equivalent Rates for Federal Hires (29 U.S.C. 206 and 41 U.S.C. chapter 67).(2) (May 2014)

52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (3) (Aug 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May 2014) ( 29U.S.C.206 and 41 U.S.(4) C. chapter 67).

52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain (5) Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (6) (May 2014) (41 U.S.C. chapter 67).

52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 .(7) (Jan 2022)

52.222-62, Paid Sick Leave Under Executive Order 13706 (E.O. 13706).(8) (Jan 2022)

52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42 U.S.C. 1792).(9)

(d) . The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded Comptroller General Examination of Record using other than sealed bid, is in excess of the simplified acquisition threshold, as defined in FAR 2.101, on the date of award of this contract, and does not contain the clause at 52.215-2, Audit and Records-Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e)

(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1), in a subcontract for commercial products or commercial services. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (41 U.S.C. 3509).(Nov 2021)

(ii) 52.203-17, Contractor Employee Whistleblower Rights (41 U.S.C. 4712).(Nov 2023)

(iii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iv) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec (Section 1634 of Pub. L. 115-91).2023)

(v) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Section 889(Nov 2021) (a)(1)(A) of Pub. L. 115-232).

(vi) 52.204-27, Prohibition on a ByteDance Covered Application (Section 102 of Division R of Pub. L. 117-328).(Jun 2023)

(vii)

(A) 52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition. (Pub. L. 115-390, title II).(Dec 2023)

(B) Alternate I of 52.204-30.(Dec 2023)

(viii) 52.219-8, Utilization of Small Business Concerns ( ) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting Feb 2024 opportunities. If the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.702(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(ix) 52.222-21, Prohibition of Segregated Facilities .(Apr 2015)

(x) 52.222-26, Equal Opportunity (E.O.11246).(Sep 2015)

(xi) 52.222-35, Equal Opportunity for Veterans (38 U.S.C. 4212).(Jun 2020)

(xii) 52.222-36, Equal Opportunity for Workers with Disabilities (29 U.S.C. 793).(Jun 2020)

(xiii) 52.222-37, Employment Reports on Veterans (38 U.S.C. 4212).(Jun 2020)

(xiv) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (E.O. 13496). Flow down required in (Dec 2010) accordance with paragraph (f) of FAR clause 52.222-40.

(xv) 52.222-41, Service Contract Labor Standards (41 U.S.C. chapter 67).(Aug 2018)

(xvi)

(A) 52.222-50, Combating Trafficking in Persons (22 U.S.C. chapter 78 and E.O 13627).(Nov 2021)

(B) Alternate I of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).(Mar 2015)

(xvii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

(xviii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).

(xix) 52.222-54, Employment Eligibility Verification (E.O. 12989).(May 2022)

(xx) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 .(Jan 2022)

(xxi) 52.222-62, Paid Sick Leave Under Executive Order 13706 (E.O. 13706).(Jan 2022)

(xxii)

(A) 52.224-3, Privacy Training (Jan 2017) (5 U.S.C. 552a).

(B) Alternate I of 52.224-3.(Jan 2017)

(xxiii) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Section 862, as amended, of the National (Oct 2016) Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

(xxiv) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (42 U.S.C. 1792). Flow down required in accordance with (Jun 2020) paragraph (e) of FAR clause 52.226-6.

(xxv) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) (31 U.S.C. 3903 and 10 U.S.C. 3801). Flow down required in accordance with paragraph (c) of 52.232-40.

(xxvi) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (46 U.S.C. 55305 and 10 U.S.C. 2631). Flow down (Nov 2021) required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial products and commercial services a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

52.232-1 Payments. (Apr 1984)

As prescribed in 32.111(a)(1), insert the following clause, appropriately modified with respect to payment due date in accordance with agency regulations, in solicitations and contracts when a fixed-price supply contract, a fixed-price service contract, or a contract for nonregulated communication services is contemplated:

Payments (Apr 1984)

The Government shall pay the Contractor, upon the submission of proper invoices or vouchers, the prices stipulated in this contract for supplies delivered and accepted or services rendered and accepted, less any deductions provided in this contract. Unless otherwise specified in this contract, payment shall be made on partial deliveries accepted by the Government if-

(a) The amount due on the deliveries warrants it; or

(b) The Contractor requests it and the amount due on the deliveries is at least $1,000 or 50 percent of the total contract price.

(End of clause)

52.252-2 Clauses Incorporated by Reference. (Feb 1998)

As prescribed in , insert the following clause:52.107(b)

Clauses Incorporated By Reference (Feb 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

www.acquisition.gov

(End of clause)

52.252-6 Authorized Deviations in Clauses. (Nov 2020)

As prescribed in 52.107(f), insert the following clause in solicitations and contracts that include any FAR or supplemental clause with an authorized deviation. Whenever any FAR or supplemental clause is used with an authorized deviation, the contracting officer shall identify it by the same number, title, and date assigned to the clause when it is used without deviation, include regulation name for any supplemental clause, except that the contracting officer shall insert "(DEVIATION)" after the date of the clause.

Authorized Deviations in Clauses (Nov 2020)

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.

(b) The use in this solicitation or contract of any Federal Acquisition Regulation[insert regulation name] (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

(End of clause)

DFARS Clauses Incorporated by Full Text

252.211-7003 Item Unique Identification and Valuation. (Jan 2023)

As prescribed in 211.274-5(a), use the following clause:

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) Definitions. As used in this clause-

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO) /International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD.

All DoD recognized unique identification equivalents are listed at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

" Enterprise " means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

" Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

" Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(If items are identified in the Schedule, insert "See Schedule in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ____.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense…