Solicitation Combo- FA251726QA038.pdf

DEPARTMENT OF THE AIR FORCE

UNITED STATES SPACE FORCE

SPACE BASE DELTA 1

Semper Supra

09 September 2026

FROM: 21 CONS/PKA

135 Dover Street, Suite 2225

Peterson SFB, CO 80914

SUBJECT: REQUEST FOR QUOTE (RFQ) – TruLink Portable Transceiver

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in RFO Subpart 12, as supplemented with additional information included in this notice.

This announcement constitutes the only solicitation; quotes are being requested, and a written solicitation will not be issued.

The Solicitation number FA251726QA038 shall be used to reference any written quote provided under this Combined Synopsis/Solicitation. The purpose of this Combined Synopsis/Solicitation is for the 34th Aeromedical Evacuation Squadron to acquire Brand-name TruLink Portable

Transceiver, listed in Table 1 below, on Peterson Space Force Base (SFB), CO.

This solicitation incorporates provisions and clauses by reference. The incorporated provisions and clauses are those in effect through Revolutionary FAR (Federal Acquisition Regulation) Overhaul

(RFO), effective 07/01/2026. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov.

This Combined Synopsis/Solicitation is solicited as other than full and open with a brand name justification. The North American Industrial Classification System (NAICS) code is 334220 -

Receiver-transmitter units (i.e., transceivers) manufacturing. The size standard is 1,250 employees.

The quotes will be evaluated IAW RFO 52.212-2, found herein. Please read and comply with all requirements for submitting a quote under the solicitation instructions and the addenda to RFO

52.212-1. Failure to comply with all instructions contained within this synopsis/solicitation could result in the quote being ineligible for award. It is the quoter’s responsibility to ensure their quote meets all the requirements identified herein.

Table 1 – Contract Line Items

CLIN Line Item

Description

Unit Quantity Part Number Unit

Price

Total

CUI

CUI

http://www.acquisition.gov/

*RFO Provision 52.212-1, Instructions to Offerors-Commercial Product and Commercial

Services (April 2026) applies to these acquisitions and the following addendum applies:

The Following words stating “offer”, “offeror”, and “proposal” are replaced with

“quotation”, “vendor”, and “quote”.

Paragraph (a) first sentence revised as follows: “The NAICS code and small business size standard for this acquisition appear above.”

Paragraph (c) first sentence revised as follows: “The vendor agrees to hold the prices in its quote firm for 60 calendar days from the date specified for receipt of quotes, unless another time period is specified in an addendum to the combined synopsis/solicitation.”

The delivery location is Peterson Space Force Base. The required Completion Date for this requirement is on or before 180 calendar days after receipt of award for all CLINS in

Table 1.

The resulting award will be a Firm-Fixed Priced Purchase Order.

Any questions regarding this solicitation shall be submitted to the contracting team no later than

(NLT) 09:00 A.M. Mountain Time (MT) Friday, 11 September 2026. All questions must be submitted to both the Contract Specialist, Earl John C. Tenoso at earl_john.tenoso@spaceforce.mil and Contracting Officer, Stephen Carr, at stephen.carr.12@spaceforce.mil. Questions submitted after this deadline may not be answered.

Quotes and contract documentation shall be provided NLT 09:00 AM (MT) Tuesday, 15

September 2026 to 21 CONS/PKA. Please submit quotes to both the Contract Specialist, Earl

John C. Tenoso at earl_john.tenoso@spaceforce.mil and Contracting Officer, Stephen Carr, at stephen.carr.12@spaceforce.mil. It is the quoter’s responsibility to complete their reps and certs at SAM.gov for the quote to be evaluated for award. Submit no more than 5 pages in response to this request. After 5 pages, the Contracting Officer will not evaluate the information. One page is considered to be one side of an 8 ½ x 11 piece of paper in a minimum of 10 font, single spaced.

It is the quoter’s responsibility to complete their reps and certs at SAM.gov for the quote to be evaluated for the award

Late submissions:

(a) Vendor are responsible for submitting quotes, and any modifications or withdrawals, so as to reach the Government office designated in the request for quote

(RFQ) by the time specified in the RFQ. If no time is specified in the RFQ, the time for

Telephonics

TruLink Portable

Transceiver

EA 51 Part no: 780-

1000-001-CF0095-

M28

Total

CUI

mailto:earl_john.tenoso@spaceforce.mil mailto:stephen.carr.12@spaceforce.mil mailto:earl_john.tenoso@spaceforce.mil mailto:stephen.carr.12@spaceforce.mil receipt is 4:30 p.m., local time, for the designated Government office on the date that quotes are due.

(b) (1) Any quote, modification, or withdrawal received at the Government office designated in the RFQ after the exact time specified for receipt of quote is “late” and will not be considered unless it is received before award is made, the Contracting Officer determines that accepting the late quote would not unduly delay the acquisition; and—

(i) If it was transmitted through an electronic commerce method authorized by the

RFQ, it was received at the initial point of entry to the Government infrastructure not later than 5:00 p.m. one working day prior to the date specified for receipt of quotes; or

(ii) There is acceptable evidence to establish that it was received at the Government installation designated for receipt of quotes and was under the Government's control prior to the time set for receipt of quotes.

(2) However, a late modification of an otherwise successful quote that makes its terms more favorable to the Government, will be considered at any time it is received and may be accepted.

(c) Acceptable evidence to establish the time of receipt at the Government installation includes the time/date stamp of that installation on the quote wrapper, other documentary evidence of receipt maintained by the installation, or oral testimony or statements of

Government personnel.

(d) If an emergency or unanticipated event interrupts normal Government processes so that quotes cannot be received at the Government office designated for receipt of quotes by the exact time specified in the RFQ and urgent Government requirements preclude amendment of the RFQ, the time specified for receipt of quotes will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume.

(e) Quotes may be withdrawn by written notice received at any time before the exact time set for receipt of quotes. A quote may be withdrawn in person by a quoter or its authorized representative if, before the exact time set for receipt of quotes, the identity of the person requesting withdrawal is established and the person signs a receipt for the quote.

Note: .zip files are not an acceptable format for the Air Force/Space Force Network and will not go through our email system.

Please provide the following information with your quote:

Company Name:

Contact Name:

Address:

Telephone Number:

Unit Price:

Extended Price:

Cage Code:

Statement the quote is valid for a minimum of 60 calendar days:

Size of Business/Socio Economic Status:

*Number of Employees_____________

*Total Yearly Revenue_______________

*Information required determining size of business for the NAICS referenced above

Payment Terms: _________________________

All companies must be registered in the System for Award Management at https://www.sam.gov/portal/public/SAM/ to be considered for award. The Government will not provide contract financing for this acquisition.

The contractor’s quote/response shall consist of two (2) separate parts:

Part I - Priced Quote

Part II - Technical Documentation

2. Format and Specific Instructions.

A. PART I – PRICED QUOTE

The quoter shall submit on company letterhead a quote identifying the unit, quantity, unit price, part number, and total price for all CLINs from Table 1 or fill in Table 1 (see above).

B. PART II – TECHNICAL DOCUMENTATION

Quoters shall submit technical information, quoter will provide part number and description of item to confirm the items requested will be provided as stated in this combined synopsis/solicitation (see Attachment 3 - Trulink Portable Transceiver Spec Sheet).

RFO 52.212-2 Evaluation – Commercial Items (April 2026)

This tailored clause takes precedence over the clause incorporated by reference.

The Government will award a firm fixed priced purchase order resulting from this solicitation to the responsible quoter whose quote conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate quotes:

Part I – Priced Quote

Part II - Technical Documentation

Award will be made based on the quote that meets the technical criteria on an acceptable/unacceptable basis. If any technical criteria are determined to be unacceptable, that quote may not be evaluated further and may not be eligible for award.

Addendum to RFO 52.212-2 - Evaluation -- Commercial Items

1. Evaluation:

By submission of its quote, the quoter agrees to all solicitation requirements, including terms and conditions, representations and certifications, and technical requirements. Failure to adhere to all solicitation requirements may result in a quote being determined unacceptable and ineligible for further evaluation. The evaluation process follows:

CUI

https://www.sam.gov/portal/public/SAM/

Part I – Priced Quote Evaluation

Initially, the Government will place all quotes that meet the requirements of the solicitation in order by price, beginning with the lowest evaluated price. The price will be evaluated using either a quote identifying the unit price, total line-item price, overall price, and estimated lead time for all CLINs identified in Table 1 provided in Addendum to RFO 52.212-1.

The Government will then evaluate the quote to determine if it is reasonable and complete. If there is a conflict between the unit price and the overall price, the unit price will be used to determine the correct price. Failure to quote for any price element may cause the quoter’s quote to be rejected as unacceptable.

Quoters whose evaluated price is unreasonable (in accordance with RFO 15.404-1) may not be considered for award.

Part II – Technical Documentation Evaluation

Next, the quote will be evaluated on an Acceptable/Unacceptable basis for the Technical

Requirement. For the vendor to receive a rating of “Acceptable”, they shall submit technical information to confirm the items requested will be provided as stated in this RFQ. If the vendor does not demonstrate all necessary requirements, they will receive an “Unacceptable” rating and evaluation of that quote will stop.

The technical factors will receive one of the following ratings listed below.

Rating Description

Rating Description

Acceptable Quote meets the requirements of Part I – Price Quote and Part II – Technical

Documentation of this solicitation

Unacceptable Quote does not meet the requirements of Part I – Price Quote and Part II –

Technical Documentation of this solicitation

2. Basis of Award:

If the lowest of the evaluated priced quotes receives an “acceptable” technical rating, that quote represents the most advantageous quoter to the Government, evaluation of that quote is complete, and the evaluation process will stop, resulting in an award. If the lowest evaluated priced quote receives an “unacceptable” technical rating, evaluation of that quote will stop. In that instance, the next lowest evaluated priced quote will be evaluated using the methodology above and the process will continue (in order by price) until a quote receives an “acceptable” technical rating, or until all quotes are evaluated.

Conversations conducted to resolve minor or clerical errors will not constitute discussions and the Contracting Officer reserves the right to award a contract without the opportunity for a quote revision. The Government intends to award a contract without conversations (while keeping with

RFO Part 12). The Government, however, reserves the right to conduct conversations if deemed in its best interest.

In the case that a discrepancy exists between the addendum to RFO 52.212-1, Instructions to

Offerors –Commercial Products and Commercial Services and the addendum to RFO 52.212-2, Evaluation – Commercial Products and Commercial Services, the evaluation criteria in the addendum to RFO 52.212-2, Evaluation – Commercial Products and Commercial Services will take precedence.

List of Attachments:

Attachment 1 - AFMAN11-2AEV3

Attachment 2 - Medical Equipment Compendium

Attachment 3 - Trulink Portable Transceiver Spec Sheet

Contract Administration Data

DFARS Clauses Incorporated by Reference

Number Trtle

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports.

DFARS Clauses Incorporated by Full Text

252.232-7006 Wide Area Workflow Payment Instructions.

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) Definitions. As used in this clause-

Effective Date

Dec2018

(Jan2023)

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

FA251726QA038

Alternate/ Variation Deviation Effective

Date

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense

Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall-

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

2 to 1 Invoices

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

FA251726QA038

(Contracting Officer: Insert either "Invoice 2in1" or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2)) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Data to be entered in WAWF

F87700

Field Name in WAWF

Pay Official DoDAAC

Issue By DoDAAC

Admin DoDAAC

Inspect By DoDAAC

Ship To Code

FA2517

FA2517

F3LR30

F3LR30

Ship From Code N/A Mark For Code N/A

N/A

N/A

Service Approver (DoDAAC)

Service Acceptor (DoDAAC)

Accept at Other DoDAAC N/A LPO DoDAAC N/A

DCAA Auditor DoDAAC

Other DoDAAC(s)

N/A

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.")

(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

(Contracting Officer: Insert applicable information or "Not applicable.")

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Special Contract Requirements

5352.201-9101 FLDCOM Ombudsman

OMBUDSMAN (JUL 2023)

FA251726QA038

(a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the interested party to another official who can resolve the concern.

(b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/ or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee employer actions, contests of 0MB Circular A-76 competition performance decisions).

(c) If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman, Mr. Erik

Symanski.

AFICC/KS

Attn: Ombudsman Mr. Symanski

250 S. Peterson

Peterson SFB, CO 80914-3140

E-Mail:erik.symanski@us.af.mil

Phone: (719)554-3668

Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/SMC ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC

20330-1060, phone number (571) 256-2395, facsimile number (571 )256-2431.

(d) The ombudsman has no authority to render a decision that binds the agency.

(e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the contracting officer.

Contract Clauses

FAR Clauses Incorporated by Reference

Number

52.203-19 52.204-13 52.204-91 52.209-6

52.209-10 52.212-4 52.219-6 52.222-3 52.222-19 52.222-36 52.222-50 52.222-90 52.223-23 52.225-3 52.226-8 52.229-4 52.232-33 52.232-40 52.233-3 52.233-4 52.240-91 52.244-6

Trtle

Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements.

System for Award Management-Maintenance. (Deviation 2026-00038) Contractor Identification. (Deviation 2026-00038) Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (Deviation 2026-00038) Prohibition on Contracting With Inverted Domestic Corporations. (Deviation 2026-00038) Terms and Conditions-Commercial Products and Commercial Services. (Deviation 2026-00038) Notice of Total Small Business Set-Aside. (Deviation 2026-00038) Convict Labor. (Deviation 2026-00038) Child Labor-Cooperation with Authorities and Remedies. (Deviation 2026-00038) Equal Opportunity for Workers with Disabilities. (Deviation 2026-00038) Combating Trafficking in Persons. (Deviation 2026-00038) Addressing DEi Discrimination by Federal Contractors. (Deviation 2026-00040, Revision 1) Sustainable Products. (Deviation 2026-00038) Buy American-Free Trade Agreements-Israeli Trade Act. (Deviation 2026-00038) Encouraging Contractor Policies to Ban Text Messaging While Driving.

Federal, State, and Local Taxes (State and Local Adjustments). (Deviation 2026-00038) Payment by Electronic Funds Transfer-System for Award Management.

Providing Accelerated Payments to Small Business Subcontractors.

Protest after Award. (Deviation 2026-00038) Applicable Law for Breach of Contract Claim. (Deviation 2026-00038) Security Prohibitions and Exclusions. (Deviation 2026-00038) Subcontracts for Commercial Products and Commercial Services. (Deviation 2026-00038)

DFARS Clauses Incorporated by Reference

Number

252.203-7000 252.203-7002 252.204-7012 252.204-7018 252.223-7008 252.225-7001 252.225-7002 252.225-7056 252.225-7060 252.232-7010 252.246-7008 252.247-7023

T1tle

Requirements Relating to Compensation of Former DoD Officials.

Requirement to Inform Employees of Whistleblower Rights.

Safeguarding Covered Defense Information and Cyber Incident Reporting.

Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

Prohibition of Hexavalent Chromium.

Buy American and Balance of Payments Program.

Qualifying Country Sources as Subcontractors.

Prohibition Regarding Business Operations with the Maduro Regime.

Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region.

Levies on Contract Payments.

Sources of Electronic Parts.

Transportation of Supplies by Sea.

FAR Clauses Incorporated by Full Text

52.252-2 Clauses lncorporalad by Reference.

Clauses Incorporated By Reference (Feb 1998)

FA251726QA038

Alternate/ Variation Effective Date Deviation Effective

Date Jan 2017 Feb 2026 Feb 2026 Feb 2026

Feb 2026 Feb 2026 Feb 2026 Feb 2026 Mar2026 Feb 2026 Feb 2026 Apr2026 Feb 2026 Feb 2026 May2024 Feb 2026 Oct2018 Mar2023 Feb 2026 Feb 2026 Feb 2026 Apr2026

Alternate/ Variation Effecllve Date Deviation Effecllve

Date Sep 2011 Dec2022 May2024 Jan 2023 Jan 2023 Feb 2024 Mar2022 Jan 2023 Jun 2023 Dec2006 Jan 2023 Oct2024

{Feb 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

Acquisition.gov ____ [Insert one or more Internet addresses]

(End of clause)

DFARS Clauses Incorporated by Full Text

252.211-7003 Ham Unique Identification and Valuation. {Jan2023)

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) Definitions. As used in this clause-

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means-

FA251726QA038

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code;

enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/lnternational Electrotechnical Commission

(IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

" Enterprise "means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

" Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/

IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

" Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government"s unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

See Schedule

(ii) Items for which the Government"s unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

See Schedule

(If items are identified in the Schedule, insert "See Schedule in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number __ .

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition

Program as specified in Attachment Number __ .

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item

Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International

Standard 16022, Information technology- International symbology specification - Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that-

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (Als) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information

Technology- EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (Dis) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology

- EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEis) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data

Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format

Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall-

(A) Determine whether to-

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL

STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for

Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code-

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph

(c)(1 )(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government"s unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

FA251726QA038

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1 )(iii) of this clause or when item unique identification is provided under paragraph (c)(1 )(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.••

(4) Issuing agency code (if concatenated unique item identifier is used).••

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).••

(8) Current part number (optional and only if not the same as the original part number).••

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

•• Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods-

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) __ , Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial products or commercial services.

(End of clause)

Representations, Certification, & Other Statements

Number

52.240-90

Tille

Security Prohibitions and Exclusions Representations and Certifications. (Deviation 2026-00038)

DFARS Clauses Incorporated by Reference

Number

252.203-7005 252.225-7055 252.225-7059

TIiie

Representation Relating to Compensation of Former DoD Officials.

Representation Regarding Business Operations with the Maduro Regime.

Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region-Representation.

FAR Clauses Incorporated by Full Text

Effective Date

Feb 2026

Effective Date

Sep 2022 May2022 Jun 2023

52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal (Feb 2026) Law. (Deviation 2026-00038)

FA251726QA038

Alternate/ Variation Deviation Effective

Date

Alternate/ Variation Deviation Effective

Date

Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law (Feb 2026) (Deviation 2026-00038)

(a) The Government will not enter into a contract with any corporation that-

(1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless an agency has considered suspension or debarment of the corporation and made a determination that suspension or debarment is not necessary to protect the interests of the Government; or

(2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless an agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government.

(b) The Offeror represents that-

(1) It is [] is not [] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability; and

(2) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months.

(End of provision)

52.225-4 Buy American-Free Trade Agreements-Israeli Trade Act Certificate. (Deviation 2026-00038) (Feb2026)

Buy American-Free Trade Agreements-Israeli Trade Act Certificate (Feb 2026) (Deviation 2026-00038)

(a)

(1) The Offeror certifies that each end product, except those listed in paragraph (b) or (c)(1) of this provision, is a domestic end product and that each domestic end product listed in paragraph (c)(2) of this provision contains a critical component.

(2) The terms "Bahraini, Moroccan, Omani, Panamanian, or Peruvian end product," "commercially available off-the-shelf (COTS) item," "critical component," "domestic end product," "end product," ''foreign end product," "Free Trade Agreement country," "Free Trade Agreement country end product," "Israeli end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act."

(b) The Offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahraini, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act":

Free Trade Agreement Country End Products (Other than Bahraini, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:

Line item No. Country of origin

[List as necessary]

(c)

(1) The Offeror shall list those supplies that are foreign end products (other than those listed in paragraph (b) of this provision) as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act."

Other Foreign End Products:

Line Item No. Country of origin

[List as necessary]

(2) The Offeror shall list the line item numbers of domestic end products that contain a critical component (see FAR 25.105).

Line Item No.

[List as necessary]

(d) The Government will evaluate offers in accordance with the policies and procedures of part 25 of the Federal Acquisition Regulation.

(End of provision)

DFARS Clauses Incorporated by Full Text

252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunlcatlons Equipment or Servlces Representalion.

(May2021)

PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES-REPRESENTATION (MAY 2021)

The Offeror is not required to complete the representation in this provision if the Offeror has represented in the provision at 252.204-7016, Covered Defense

Telecommunications Equipment or Services-Representation, that it "does not provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument."

(a) Definitions. "Covered defense telecommunications equipment or services," "covered mission," "critical technology," and "substantial or essential component," as used in this provision, have the meanings given in the 252.204-7018 clause, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services, of this solicitation.

(b) Prohibition. Section 1656 of the National Defense Authorization Act for Fiscal Year 2018 (Pub. L. 115-91) prohibits agencies from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) at https://www.sam.gov for entities that are excluded when providing any equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless a waiver is granted.

(d) Representation. If in its annual representations and certifications in SAM the Offeror has represented in paragraph (c) of the provision at 252.204-7016, Covered

Defense Telecommunications Equipment or Services-Representation, that it "does" provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument, then the Offeror shall complete the following additional representation:

The Offeror represents that it [ ] will [ ] will not provide covered defense telecommunications equipment or services as a part of its offered products or services to DoD in the performance of any award resulting from this solicitation.

(e) Disclosures. If the Offeror has represented in paragraph (d) of this provision that it "will provide covered defense telecommunications equipment or services," the

Offeror shall provide the following information as part of the offer:

(1) A description of all covered defense telecommunications equipment and services offered (include brand or manufacturer; product, such as model number, original equipment manufacturer (OEM) number, manufacturer part number, or wholesaler number; and item description, as applicable).

(2) An explanation of the proposed use of covered defense telecommunications equipment and services and any factors relevant to determining if such use would be permissible under the prohibition referenced in paragraph (b) of this provision.

(3) For services, the entity providing the covered defense telecommunications services (include entity name, unique entity identifier, and Commercial and Government

Entity (CAGE) code, if known).

(4) For equipment, the entity that produced or provided the covered defense telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known).

(End of provision)

Instructions, Conditions, & Notices to Offerors or Quoters

Number

52.203-18

52.204-7 52.212-1 52.214-34 52.214-35

Trtle

Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements-Representation.

System for Award Management-Registration. (Deviation 2026-00038) Instructions to Offerors-Commercial Products and Commercial Services. (Deviation 2026-00038) Submission of Offers in the English Language.

Submission of Offers in U.S. Currency.

DFARS Clauses Incorporated by Reference

Number T1tle

252.204-7024 Notice on the Use of the Supplier Performance Risk System.

FAR Clauses Incorporated by Full Text

52.252-1 Solicitation Provisions Incorporated by Reference.

Solicitation Provisions Incorporated by Reference (Feb 1998)

FA251726QA038

Alternate/ Variation Effective Date Deviation Effective

Date Jan 2017

Feb 2026 Feb 2026 Apr 1991 Apr 1991

Alternate/ Variation Effective Date Deviation Effective

Date Mar2023

(Feb 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting

Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

Acquisition.gov __ __,_lnsert one or more Internet addresses]

Evaluation Factors for Award

FAR Clauses Incorporated by Full Text

52.212-2 Evaluation-Commercial Producls and Commercial Services. (Deviation 202&-00038)

Evaluation-Commercial Products and Commercial Services (Feb 2026) (Deviation 2026-00038)

(Feb2026)

FA251726QA038

(a) Evaluation factors. The Government will award a contract resulting from this solicitation to the responsible Offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors will be used to evaluate offers:

[Insert evaluation factors in the relative order of importance. For requests for proposals, state: Evaluation factors other than price when combined are [significantly more important than price/approximately equal to price/significantly less important] than price. For invitations for bids, list only price and price-related factors.]

Priced Quote

Technical Documentation

(b) Options (if applicable). The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The

Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. The evaluation of options does not obligate the Government to exercise the option(s).

(c) Notice of award. A written notice of award or acceptance of an offer furnished to the successful Offeror within the time for…