Solicitation 36C26223Q1117.pdf

PAGE 1 OF 1. REQUISITION NO.

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NO. 5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

a. NAME b. TELEPHONE NO. (No Collect Calls) 8. OFFER DUE DATE/LOCAL

TIME

9. ISSUED BY CODE 10. THIS ACQUISITION IS UNRESTRICTED OR SET ASIDE: % FOR:

SMALL BUSINESS

HUBZONE SMALL

BUSINESS

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

WOMEN-OWNED SMALL BUSINESS

(WOSB) ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

8(A)

NAICS:

SIZE STANDARD:

11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

12. DISCOUNT TERMS

13a. THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700)

13b. RATING

14. METHOD OF SOLICITATION

RFQ IFB RFP

15. DELIVER TO CODE 16. ADMINISTERED BY CODE

17a. CONTRACTOR/OFFEROR CODE FACILITY CODE 18a. PAYMENT WILL BE MADE BY CODE

TELEPHONE NO. UEI: EFT:

PHONE: FAX:

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK BELOW IS CHECKED

SEE ADDENDUM

19. 20. 21. 22. 23. 24.

ITEM NO. SCHEDULE OF SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Govt. Use Only)

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA ARE ARE NOT ATTACHED.

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN _______________ 29. AWARD OF CONTRACT: REF. ___________________________________ OFFER COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DATED ________________________________. YOUR OFFER ON SOLICITATION DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY (BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED SET FORTH HEREIN IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30b. NAME AND TITLE OF SIGNER (TYPE OR PRINT) 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (TYPE OR PRINT) 31c. DATE SIGNED

AUTHORIZED FOR LOCAL REPRODUCTION (REV. NOV 2021)

PREVIOUS EDITION IS NOT USABLE Prescribed by GSA - FAR (48 CFR) 53.212

7. FOR SOLICITATION

INFORMATION CALL:

STANDARD FORM 1449

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

PR 600-23-2-386-0142

36C26223Q1117 05-22-2023

Barbosa, Mayra 858-626-8768 06-05-2023

11:00 AM PDT

36C262 Department of Veterans Affairs Network Contracting Office 22 4811 Airport Plaza Drive Suite 600 Long Beach CA 90815

X 100

X

337214

1000 Employees

N/A

X

36C600

Department of Veterans Affairs

VA LONG BEACH HEALTHCARE SYSTEM

575 N Batavia St.

Orange CA 92868

36C262

Department of Veterans Affairs Network Contracting Office 22 4811 Airport Plaza Drive Suite 600 Long Beach CA 90815

Department of Veterans Affairs Financial Services Center

See CONTINUATION Page

PLEASE ENSURE THE FOLLOWING INFORMATION IS REFERENCED

ITEM SCHEDULE, SALIENT CHARACTERISTICS, AND ALL CLAUSES

Vendors shall show clear, compelling and convincing evidence that all “equal to items" meet all required salient characteristics IAW FAR 52.211-6 - Brand Name or Equal.

PERIOD OF PERFORMANCE: 14 WEEKS AFTER RECEIPT OF ORDER

QUOTE MUST BE SUBMITTED TO MAYRA.BARBOSA@VA.GOV

THIS IS A FIRM FIXED PRICE REQUIREMENT.

See CONTINUATION Page

X X

X 1

MAYRA BARBOSA

CONTRACTING OFFICER

36C26223Q1117

Table of Contents

SECTION A

A.1 SF 1449 SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL PRODUCTS

AND COMMERCIAL SERVICES

SECTION B - CONTINUATION OF SF 1449 BLOCKS

B.1 CONTRACT ADMINISTRATION DATA

B.2 PRICE/COST SCHEDULE

ITEM INFORMATION

B.3 STATEMENT OF WORK

B.4 DELIVERY SCHEDULE

SECTION C - CONTRACT CLAUSES

C.1 52.212-4 CONTRACT TERMS AND CONDITIONS—COMMERCIAL PRODUCTS

AND COMMERCIAL SERVICES (DEC 2022)

C.2 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT

STATUTES OR EXECUTIVE ORDERS—COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES (MAR 2023)

C.3 52.217-6 OPTION FOR INCREASED QUANTITY (MAR 1989)

C.4 VAAR 852.219-73 VA NOTICE OF TOTAL SET-ASIDE FOR VERIFIED SERVICE-

DISABLED VETERAN-OWNED SMALL BUSINESSES (NOV 2022)

C.5 VAAR 852.219-76 VA NOTICE OF LIMITATIONS ON SUBCONTRACTING--

CERTIFICATE OF COMPLIANCE FOR SUPPLIES AND PRODUCTS (NOV 2022)

C.6 VAAR 852.232-72 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS (NOV

2018)

C.7 VAAR 852.242-71 ADMINISTRATIVE CONTRACTING OFFICER (OCT 2020)

C.8 VAAR 852.247-72 MARKING DELIVERABLES (OCT 2018)

C.9 VAAR 852.247-71 DELIVERY LOCATION (OCT 2018)

C.10 VAAR 852.247-73 PACKING FOR DOMESTIC SHIPMENT (OCT 2018)

C.11 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

SECTION D - CONTRACT DOCUMENTS, EXHIBITS, OR ATTACHMENTS

SECTION E - SOLICITATION PROVISIONS

E.1 52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS

AND VIDEO SURVEILLANCE SERVICES OR EQUIPMENT (NOV 2021)

E.2 52.212-1 INSTRUCTIONS TO OFFERORS—COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES (MAR 2023)

E.3 ADDENDUM to FAR 52.212-1 INSTRUCTIONS TO OFFERORS—COMMERCIAL

PRODUCTS AND COMMERCIAL SERVICES

E.4 52.212-2 EVALUATION—COMMERCIAL PRODUCTS AND COMMERCIAL

SERVICES (NOV 2021)

E.5 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS—

COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (DEC 2022)

E.6 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB

1998)

SECTION B - CONTINUATION OF SF 1449 BLOCKS

B.1 CONTRACT ADMINISTRATION DATA

1. Contract Administration: All contract administration matters will be handled by the following individuals:

a. CONTRACTOR:

b. GOVERNMENT: Contracting Officer 36C262

Department of Veterans Affairs

Network Contracting Office 22

4811 Airport Plaza Drive

Suite 600

Long Beach CA 90815

2. CONTRACTOR REMITTANCE ADDRESS: All payments by the Government to the contractor will be made in accordance with:

[X] 52.232-33, Payment by Electronic Funds Transfer—System For Award Management, or

[X] 52.232-36, Payment by Third Party

3. INVOICES: Invoices shall be submitted in arrears:

a. Quarterly []

b. Semi-Annually []

c. Other []

4. GOVERNMENT INVOICE ADDRESS: All Invoices from the contractor shall be submitted electronically in accordance with VAAR Clause 852.232-72 Electronic Submission of Payment Requests.

ACKNOWLEDGMENT OF AMENDMENTS: The offeror acknowledges receipt of amendments to the Solicitation numbered and dated as follows:

AMENDMENT NO DATE

B.2 PRICE/COST SCHEDULE

ITEM INFORMATION

ITEM

NUMBER

DESCRIPTION OF

SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

2.00 EA __________________ __________________

F0205BH-C1 - Seating Lounge JSN #: F0205BH-C1 Manufacturer:

Spec Furniture Model: Tailor HD Single seater / 9101MHD Description: Upholstered back, seat, arms, and sides; roto-molded foot Dimensions: 23"W x 30"D x 33"H Finishes: Maharam: Beryl, Goddess 466508-013 or Equal To

VENDOR MUST PROVIDE THE FOLLOWING:

BRAND NAME:

MODEL NUMBER:

2.00 EA __________________ __________________

F0205BH-C2 - Seating Lounge JSN #: F0205BH-C2 Manufacturer:

Spec Furniture Model: Tailor Heavy Duty / 9101MHD Description:

Heavy Duty, Tailor Lounge Freestanding, Medium Back, Single with Arms, Bolt down to Floor Description: 29.5"W x 30"D x 33"H Finishes: Carnegie - Savile, 6458-51 or Equal To

VENDOR MUST PROVIDE THE FOLLOWING:

1.00 EA __________________ __________________

F0205BH-C3 - Seating Lounge JSN #: F0205BH-C3 Manufacturer:

Spec Furniture Model: Tailor Heavy Duty / 9101MHD Description:

Heavy Duty, Tailor Lounge Freestanding, Medium Back, Single with Arms, Bolt down to Floor Description: 29.5"W x 30"D x 33"H Finishes: Maharam - Rill, Scatter 466370-001 or Equal To

VENDOR MUST PROVIDE THE FOLLOWING:

26.00 EA __________________ __________________

F0225BH-A - Dining Chair w/arms JSN #: F0225BH-A Manufacturer:

Spec Furniture Model: Hardi Dining w/ Arms - Club 8708 Description:

Polyethylene material, textured hand grips Dimensions: 24"W x 24"D x 33"H Finishes: Color: 7015 or Equal To

VENDOR MUST PROVIDE THE FOLLOWING:

34.00 EA __________________ __________________

F0225BH-B - Club Dining Chair JSN #: F0225BH-B Manufacturer:

Spec Furniture Model: Hardi - Club 8701 Description: Dining chair Dimensions: 20"W x 24"D x 33"H Finishes: Color: 7006 or Equal To

VENDOR MUST PROVIDE THE FOLLOWING:

4.00 EA __________________ __________________

F0250BH-B1 - Club Chair JSN #: F0250BH-B1 Manufacturer: Spec

Furniture Model: Hardi Club BH 8809 Description: Polyethylene exterior, subtle textured hand grips Dimensions: 27"W x 27"D x 29.5"H Finishes: Color 5014 or Equal To

VENDOR MUST PROVIDE THE FOLLOWING:

4.00 EA __________________ __________________

F0250BH-B2 - Club Chair JSN #: F0250BH-B2 Manufacturer: Spec

Furniture Model: Hardi Club BH 8809 Description: Polyethylene exterior, subtle textured hand grips Dimensions: 27"W x 27"D x 29.5"H Finishes: Color - 7044 or Equal To

VENDOR MUST PROVIDE THE FOLLOWING:

1.00 EA __________________ __________________

F0206BH-B - Bariatric Seating Lounge w/arms JSN #: F0206BH-B

Manufacturer: Spec Furniture Model: Tailor Heavy Duty / 9101GHD Description: Heavy Duty, Tailor Lounge Freestanding, Bariatric, Single Seat with Arms, Bolt down to Floor Description: 36.5"W x 30"D x 33"H Finishes: Maharam - Rill, Scatter 466370-001 or Equal To

VENDOR MUST PROVIDE THE FOLLOWING:

GRAND TOTAL __________________

B.3 STATEMENT OF WORK

STATEMENT OF WORK

1. Background

The Long Beach VA Healthcare System has a requirement for new furniture. The brand name is Spec Furniture or Equal To. The mental health furniture is specific as it accommodates the patient population which will occupy the space once activated.

2. Scope

This requirement includes healthcare furniture for a behavioral healthcare ward, and project management.

Behavioral healthcare furnishings needed include furnishing for (5) common patient rooms where patients gather with staff.

The contractor shall provide all labor, materials, equipment, transportation, and supervision necessary to satisfy the needs of each ordering activity.

3. Period of Performance

Furniture delivery to offsite, but local to VALB, warehouse will be required 14 weeks after receipt of order

4. Place of Performance Delivery Address: 575 N Batavia St. Orange, CA 92868

5. Delivery

5.1. Vendor must coordinate delivery with VA POC. Delivery and receipt of the proposed items is anticipated to be directed to the location identified above.

5.2. Delivery shall be freight on board (FOB) – Destination.

5.3. The delivery of items identified in this document shall take place during normal business hours which are defined as: 0800 to 1500 (i.e.: 8:00am to 3:00pm Pacific Standard Time), Monday through Friday, and excluding Federal Holidays.

5.4. Delivery trucks will not be permitted to remain at the loading dock. Trucks shall be unloaded, moved from the dock, and then brought back to the dock if required to haul out any waste, tools, or excess materials.

5.5. Labeling of delivered items shall include the VA facilities contract number and VA purchase order number for identification and reference upon receipt of product.

5.6. Verification of product delivery and receipt will be completed by Government’s Activation Contractor and provided to VA Logistics. VA Logistics will provide the vendor with the receiving report upon completion.

6. Warehouse Instructions

6.1 The vendor requires the use of the Government’s activation contractor’s warehouse to meet the requirements of this contract.

6.2 The vendor must have this completed insurance certificate presented to the activation contractor prior to delivery and offloading of the item(s). See section 4 for delivery address.

6.3 The vendor must communicate through the VA POC any required coordination requirements.

7. Delivery Clean Up and Disposal

7.1. Vendor must dispose their own trash as there are no dumpsters available for vendor use.

7.2. Removal of waste and/or excess material shall be conducted through the loading dock area. Delivery trucks and/or other vendor vehicles will not be permitted to remain at the loading dock. Vehicles will need to be brought back to the dock if required to remove any waste, tools, or excess materials.

8. Salient Characteristics

8.1. Lounge Chair (9101MHD TAILOR HD-Single Seat-Medium back w\arms, RAL 7037

Roto-molded feet, c/w extra weight or equal to)

8.1.1. Behavioral Health Patient Lounge Chair (qty. 2)

8.1.2. Must have side panel that extends to the floor to have an ergonomic shape that provides lumbar support without the need to purchase extra cushions.

8.1.3. Must be made from fully welded steel frame, 14-guage minimum, which gives the furniture superior durability.

8.1.4. Must ship assembled and ready for placement on site to avoid extra work on the installation team.

8.1.5. Must be assembled without gaps, protrusions, or sharp edges to mitigate self-harm of patient population, including ligature risks.

8.1.6. All accessible fasteners must be tamper-resistant.

8.1.7. Must be waterproof

8.1.8. Dimensions must be at minimum 29” Width x 30” Depth x 33” Height; and maximum 30” Width x 31” Depth x 34” Height

8.1.9. Must have a Weight: 110 lbs. minimum and 120 lbs. maximum.

8.1.10. Fabric coverings must use secured zippers and pulls, staples are not acceptable

8.1.11. Must be tested to minimum of 500lbs

8.1.12. The chair must provide steel support stretchers to add rigidity to the undercarriage that connects and hold arms, legs, and chairbacks. It makes the lower area of the chair visually balanced

8.1.13. Must have high-resiliency molded foam for longer life

8.1.14. Must have a Seat construction, minimum 0.75” to maximum 1’ thick plywood to provide adequate support for variation in patient population weights

8.1.15. Must meet 16 CFR Part 1640 fire safety standards

8.1.16. Arms and back must securely fasten to the frame using bolted or welded connections.

8.1.17. Finish: (to be used as a guidance for design concept) Seat: fabric, Maharam

Beryl, Goddess 466508-013, or equal; Back: fabric, Maharam Beryl, Goddess 466508-013 or equal; Arm Panels: fabric, Maharam Beryl, Goddess 466508-013.

Exposed Framing: Standard Spectone Finish Dove Grey Wilsonart D92-60 Edge match RAL 7035 or equal, covered with Roto-molded inserts under the seat to eliminate ligature pass through and prevent potential patient self-harm (see below photo), or equal

This picture is to provide guidance only to vendors

8.2 Lounge Chair (9101MHD TAILOR HD-Single Seat-Medium back w\arms, RAL 7037 Roto-molded feet, c/w extra weight or equal to)

8.2.1 Behavioral Health Patient Lounge Chair (qty. 2)

8.2.2 Must have side panel that extends to the floor to have an ergonomic shape that provide lumbar support without the need to purchase extra cushions.

8.2.3 Must be fully welded frame, which gives the furniture superior durability

8.2.4 Must ship assembled and ready for placement on site to avoid extra work on the installation team

8.2.5 Must be assembled without gaps, protrusions, or sharp edges to mitigate self-harm of patient population, including ligature risks

8.2.6 All accessible fasteners must be tamper-resistant.

8.2.7 Must be waterproof

8.2.8 Dimensions must be at minimum 29” Width x 30” Depth x 33” Height; and maximum 30” Width x 31” Depth x 34” Height

8.2.9 Must have a Weight: 110 lbs. minimum; 120 lbs. maximum

8.2.10 Fabric coverings must use secured zippers and pulls; staples are not acceptable

8.2.11 Must be tested to minimum of 500lbs

8.2.12 Must provide steel support stretchers to add rigidity to the undercarriage and make the lower area of the chair visually balanced

8.2.13 Must have high-resiliency molded foam for longer life

8.2.14 Must have a seat construction, minimum 0.75” to maximum 1’’ thick plywood to provide adequate support for variation in patient population weights

8.2.15 Must meet 16 CFR Part 1640 fire safety standards

8.2.16 Arms must be bolt to the seat and the frame

8.2.17 Finish: (to be used as a guidance for design concept) Seat: fabric, Maharam-Rill, Scatter 466370-001 or equal; Back: fabric, Maharam- Rill, Scatter 466370-001 or equal; Arm Panels: fabric, Maharam Rill, Scatter 466370-001;

Exposed Framing: Standard Spectone Finish Dove Grey Wilsonart D92-60 Edge match RAL 7035 or equal, covered with Roto-molded inserts under the seat to eliminate ligature pass through and prevent potential patient self-harm (see below photo), or equal

8.3 Lounge Chair (9101MHD TAILOR HD-Single Seat-Medium back w\arms, RAL 7037 Roto-molded feet, c/w extra weight or equal to)

8.3.1 Behavioral Health Patient Lounge Chair (qty. 2)

8.3.2 Must have side panel that extends to the floor to have an ergonomic shape that provide lumbar support without the need to purchase extra cushions

8.3.3 Must be fully welded frame, which gives the furniture superior durability

8.3.4 Must ship assembled and ready for placement on site to avoid extra work on the installation team

8.3.5 Must be assembled without gaps, protrusions, or sharp edges to mitigate self-harm of patient population, including ligature risks

8.3.6 All accessible fasteners must be tamper-resistant.

8.3.7 Must be waterproof

8.3.8 Dimensions must be at minimum 29” Width x 30” Depth x 33” Height; and maximum 30” Width x 31” Depth x 34” Height

8.3.9 Must have a Weight: 110 lbs. minimum; 120 lbs. maximum.

8.3.10 Fabric coverings must use secured zippers and pulls; staples are not acceptable

8.3.11 Must be tested to minimum of 500lbs

8.3.12 Must provide steel support stretchers to add rigidity to the undercarriage and make the lower area of the chair visually balanced

8.3.13 Must have a high-resiliency molded foam for longer life

8.3.14 Must have a seat construction, minimum of 0.75” thick plywood to provide adequate support for variation in patient population weights

8.3.15 Must meet 16 CFR Part 1640 fire safety standards

8.3.16 Arms must be bolt to the seat and the frame

8.3.17 Finish: (to be used as a guidance for design concept) Seat: fabric, Carnegie-

Saville, 6458-51 or equal; Back: fabric, Carnegie-Saville, 6458-51 or equal; Arm Panels: fabric, Carnegie-Saville, 6458-51; Exposed Framing: Standard Spectone Finish Dove Grey Wilsonart D92-60 Edge match RAL 7035 or equal, covered with Roto-molded inserts under the seat to eliminate ligature pass through and prevent potential patient self-harm (see below photo), or equal

8.4 Dining Chair (CLUB 8708 Hardi Dining with Arms or equal to)

8.4.1 Behavioral health, patient dining chair (qty. 26)

8.4.2 Must have one-piece rotationally molded highly durable Polyethylene to reduce fading with lightly textured surface for a comfortable sit

8.4.3 Must be Bleach cleanable

8.4.4 Must have rounded edges to mitigate patient self-harm.

8.4.5 All accessible fasteners must be tamper-resistant.

8.4.6 Must be CAL 133 compliant is a standard for a hospital – it has a component that is flame retardant

8.4.7 Must not ship with weight added (ballasts)

8.4.8 Dimensions must have a minimum 24” Width x 24” Depth x 33” Height; and maximum 26” Width x 25” Depth x 34’ Height

8.4.9 The chair must weight minimum 27 lbs. and maximum 29 lbs.

8.4.10 Must have a max of 3” opening at the bottom of the unit to fill in with sand to stabilize the chair

8.4.11 Product must be tested to 500 lbs. Heavy duty-seating durability

8.4.12 Finish: (to be used as a guidance for design concept) RAL 7015 or equal to

(color chart available in 6 different variations) the specific code is selected as it is the color that will best match with the remainder of procured furniture

8.5 Dining Chair (HARDI CLUB 8701 Dining Chair Armless or equal to)

8.5.1 Behavioral Health Patient Dining Chair (qty. 34)

8.5.2 Must have one-piece rotationally molded highly durable to reduce fading

Polyethylene with lightly textured surface for a comfortable sit

8.5.3 Must have Contraband resistant

8.5.4 Must have tamper resistant for anti-ligature purpose

8.5.5 Must be Bleach cleanable

8.5.6 Rounded edges to mitigate patient self-injury

8.5.7 Must be CAL 133 compliant is a standard for a hospital – it has a component that is flame retardant

8.5.8 Must not have protruding legs or hardware for anti-ligature purposes

8.5.9 Must not be ship with weight added

8.5.10 Dimensions must have a minimum of 22” Width x 24” Depth x 33” Height; and maximum 24” Width x 25” Depth x 34” Height

8.5.11 Must have a maximum of 3” opening at the bottom of the units to fill in with sand to stabilize the chair

8.5.12 Product must be tested to 500 lbs. Heavy duty - seating durability

8.5.13 Finish: (to be used as a guidance for design concept) RAL 7006 or equal to

8.6 Club Chair (HARDI CLUB 8809 Roto Molded Design or equal to)

8.6.1 Behavioral Health Patient Chair for Activity Rooms (qty. 4)

8.6.2 Must have rounded edges to mitigate patient self-harm

8.6.3 Must be contraband resistant

8.6.4 Must be bleach cleanable

8.6.5 Must be tamper resistant for anti-ligature purpose

8.6.6 Must be CAL 133 compliant is a standard for a hospital – it has a component that is flame retardant

8.6.7 Must not have protruding legs or hardware

8.6.8 Must not ship with weight added (ballasts)

8.6.9 Dimensions must have a minimum 27” Width x 27” Depth x 29.5” Height; and maximum 28” Width x 28” Depth x 30.5” Height

8.6.10 Must have a maximum of 3” opening at the bottom of the units to fill in with sand to stabilize the chair

8.6.11 Product tested to 500 lbs. maximum. Heavy duty - seating durability

8.6.12 Finish: (to be used as a guidance for design concept) RAL 5014 or equal to

8.7 Club Chair (HARDI CLUB 8809 Roto Molded Design or equal to)

8.7.1 Behavioral Health Patient Chair for Activity Rooms (qty. 4)

8.7.2 Must have rounded edges to mitigate patient self-harm

8.7.3 Must be contraband resistant

8.7.4 Must be bleach cleanable

8.7.5 Must be tamper resistant for anti-ligature purpose

8.7.6 Must be heavy duty

8.7.7 Must be CAL 133 compliant is a standard for a hospital – it has a component that is flame retardant

8.7.8 Must not have protruding legs or hardware

8.7.9 Must not ship with weight added (ballasts)

8.7.10 Dimensions must have a minimum 27” Width x 27” Depth x 29.5” Height; and maximum 28” Width 28” Depth x 30.5’’ Height

8.7.11 Must have a maximum of 3” opening at the bottom of the unit to fill in with sand to stabilize the chair

8.7.12 Must be tested to maximum of 500 lbs. Heavy duty - seating durability

8.7.13 Finish: (to be used as a guidance for design concept) RAL 7044 or equal to

(color chart available in 6 different variations) we pick the one specific code because we agree as a team that color will be a good match with the rest of the furniture

8.8 Lounge Chair (9101 GHD Tailor Heavy Duty Bariatric with arms RAL 7037 Roto-molded feet or equal to)

8.8.1 Behavioral Health Patient Lounge Chair (qty. 1)

8.8.2 The side panel must extend to the floor to have an ergonomic shape that provide lumbar support without the need to purchase extra cushions

8.8.3 Must be Fully welded frame, 14-gauge minimum, which gives the furniture superior durability

8.8.4 Must ship assembled without gaps, protrusions, or sharp edges to mitigate self-harm of patient population, including ligature risks

8.8.5 All accessible fasteners must be tamper- resistant

8.8.6 Must be waterproof

8.8.7 Dimensions must have a minimum 36” Width x 30” Depth x 33” Height; and maximum 38’’ Width x 32” Depth x 34” Height

8.8.8 Fabric coverings must use secured zippers and pulls, staples are not acceptable

8.8.9 Must be tested to minimum of 500 lbs.

8.8.10 Must provide steel support stretchers to add rigidity to the undercarriage and make the lower area of the chair visually balance

8.8.11 Must have high-resiliency molded foam for longer life

8.8.12 Seat construction, minimum 0.75” to maximum 1’’ thick plywood to provide adequate support for variation in patient population weights

8.8.13 Must meet 16 CFR Part 1640 fire safety standards

8.8.14 Arms must bolt to the seat and the frame

8.3.15 Finish: (to be used as guidance for design concept) Seat: fabric, Maharam – Rill, Scatter 466370-001 or equal; Back: fabric, Maharam – Rill, Scatter 466370-001 or equal; Arm Panels: fabric, Maharam – Rill, Scatter 466370-001; Exposed Framing:

Standard Spectone Finish Dove Grey Wilsonart D92-60 Edge match RAL 7035 or equal, covered with Roto-molded inserts under the seat to eliminate ligature pass through and prevent potential patient self-harm (see below photo), or equal

8.9 Warranty

8.9.1 Vendor must provide a minimum of 7 years of warranty for supplies

8.9.2 Vendor must have Lifetime structural warranty against defects in design, construction, and materials. Finishes and upholstery must be warranted for a minimum of 2 years.

8.10 OTHER REQUIRED TECHNICAL DOCUMENTATION

8.10.1 Product literature/cutsheets

8.10.2 Warranty statement/Literature

9 Vendor’s Responsibilities

9.1. Vendor shall provide all finished surfaces free of scratches, marks, dents, or blemishes, and withstand staining, and be resistant to flaking, cracking, or loss or adhesion.

9.2. Vendor shall provide furnishings with smooth finishes with no hazardous projections, sharp corners, or detail, which can be hazardous and cause personal injury or damage to clothing.

9.3. Vendor shall identify damaged product at time of delivery and will be noted by VA

POC. New/replacement items will be the responsibility of the contractor.

9.4. The product must not be placed into production without clearance from the VA interior Design POC.

9.5. The contractor shall track manufacturing schedule and notify VA Interior Design

POC with updates of estimated completion date by email.

B.4 DELIVERY SCHEDULE

ITEM NUMBER QUANTITY

DELIVERY

DATE

2.00

2.00

1.00

26.00

34.00

4.00

4.00

1.00

SECTION C - CONTRACT CLAUSES

C.1 52.212-4 CONTRACT TERMS AND CONDITIONS—COMMERCIAL

PRODUCTS AND COMMERCIAL SERVICES (DEC 2022)

(a) Inspection/Acceptance. The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. If repair/replacement or reperformance will not correct the defects or is not possible, the Government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its post-acceptance rights—

(1) Within a reasonable time after the defect was discovered or should have been discovered;

and

(2) Before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

(b) Assignment. The Contractor or its assignee may assign its rights to receive payment due as a result of performance of this contract to a bank, trust company, or other financing institution, including any Federal lending agency in accordance with the Assignment of Claims Act (31 U.S.C. 3727). However, when a third party makes payment (e.g., use of the Governmentwide commercial purchase card), the Contractor may not assign its rights to receive payment under this contract.

(c) Changes. Changes in the terms and conditions of this contract may be made only by written agreement of the parties.

(d) Disputes. This contract is subject to 41 U.S.C. chapter 71, Contract Disputes. Failure of the parties to this contract to reach agreement on any request for equitable adjustment, claim, appeal or action arising under or relating to this contract shall be a dispute to be resolved in accordance with the clause at Federal Acquisition Regulation (FAR) 52.233-1, Disputes, which is incorporated herein by reference. The Contractor shall proceed diligently with performance of this contract, pending final resolution of any dispute arising under the contract.

(e) Definitions. The clause at FAR 52.202-1, Definitions, is incorporated herein by reference.

(f) Excusable delays. The Contractor shall be liable for default unless nonperformance is caused by an occurrence beyond the reasonable control of the Contractor and without its fault or negligence such as, acts of God or the public enemy, acts of the Government in either its sovereign or contractual capacity, fires, floods, epidemics, quarantine restrictions, strikes, unusually severe weather, and delays of common carriers. The Contractor shall notify the Contracting Officer in writing as soon as it is reasonably possible after the commencement of any excusable delay, setting forth the full particulars in connection therewith, shall remedy such occurrence with all reasonable dispatch, and shall promptly give written notice to the Contracting Officer of the cessation of such occurrence.

(g) Invoice.

(1) The Contractor shall submit an original invoice and three copies (or electronic invoice, if authorized) to the address designated in the contract to receive invoices. An invoice must include—

(i) Name and address of the Contractor;

(ii) Invoice date and number;

(iii) Contract number, line item number and, if applicable, the order number;

(iv) Description, quantity, unit of measure, unit price and extended price of the items delivered;

(v) Shipping number and date of shipment, including the bill of lading number and weight of shipment if shipped on Government bill of lading;

(vi) Terms of any discount for prompt payment offered;

(vii) Name and address of official to whom payment is to be sent;

(viii) Name, title, and phone number of person to notify in event of defective invoice; and

(ix) Taxpayer Identification Number (TIN). The Contractor shall include its TIN on the invoice only if required elsewhere in this contract.

(x) Electronic funds transfer (EFT) banking information.

(A) The Contractor shall include EFT banking information on the invoice only if required elsewhere in this contract.

(B) If EFT banking information is not required to be on the invoice, in order for the invoice to be a proper invoice, the Contractor shall have submitted correct EFT banking information in accordance with the applicable solicitation provision, contract clause (e.g., 52.232-33, Payment by Electronic Funds Transfer—System for Award Management, or 52.232-34, Payment by Electronic Funds Transfer—Other Than System for Award Management), or applicable agency procedures.

(C) EFT banking information is not required if the Government waived the requirement to pay by EFT.

(2) Invoices will be handled in accordance with the Prompt Payment Act (31 U.S.C. 3903) and Office of Management and Budget (OMB) prompt payment regulations at 5 CFR part 1315.

(h) Patent indemnity. The Contractor shall indemnify the Government and its officers, employees and agents against liability, including costs, for actual or alleged direct or contributory infringement of, or inducement to infringe, any United States or foreign patent, trademark or copyright, arising out of the performance of this contract, provided the Contractor is reasonably notified of such claims and proceedings.

(i) Payment.—

(1) Items accepted. Payment shall be made for items accepted by the Government that have been delivered to the delivery destinations set forth in this contract.

(2) Prompt payment. The Government will make payment in accordance with the Prompt Payment Act (31 U.S.C. 3903) and prompt payment regulations at 5 CFR part 1315.

(3) Electronic Funds Transfer (EFT). If the Government makes payment by EFT, see 52.212- 5(b) for the appropriate EFT clause.

(4) Discount. In connection with any discount offered for early payment, time shall be computed from the date of the invoice. For the purpose of computing the discount earned, payment shall be considered to have been made on the date which appears on the payment check or the specified payment date if an electronic funds transfer payment is made.

(5) Overpayments. If the Contractor becomes aware of a duplicate contract financing or invoice payment or that the Government has otherwise overpaid on a contract financing or invoice payment, the Contractor shall—

(i) Remit the overpayment amount to the payment office cited in the contract along with a description of the overpayment including the—

(A) Circumstances of the overpayment (e.g., duplicate payment, erroneous payment, liquidation errors, date(s) of overpayment);

(B) Affected contract number and delivery order number, if applicable;

(C) Affected line item or subline item, if applicable; and

(D) Contractor point of contact.

(ii) Provide a copy of the remittance and supporting documentation to the Contracting Officer.

(6) Interest.

(i) All amounts that become payable by the Contractor to the Government under this contract shall bear simple interest from the date due until paid unless paid within 30 days of becoming due. The interest rate shall be the interest rate established by the Secretary of the Treasury as provided in 41 U.S.C. 7109, which is applicable to the period in which the amount becomes due, as provided in (i)(6)(v) of this clause, and then at the rate applicable for each six-month period as fixed by the Secretary until the amount is paid.

(ii) The Government may issue a demand for payment to the Contractor upon finding a debt is due under the contract.

(iii) Final decisions. The Contracting Officer will issue a final decision as required by 33.211 if—

(A) The Contracting Officer and the Contractor are unable to reach agreement on the existence or amount of a debt within 30 days;

(B) The Contractor fails to liquidate a debt previously demanded by the Contracting Officer within the timeline specified in the demand for payment unless the amounts were not repaid because the Contractor has requested an installment payment agreement; or

(C) The Contractor requests a deferment of collection on a debt previously demanded by the Contracting Officer (see 32.607-2).

(iv) If a demand for payment was previously issued for the debt, the demand for payment included in the final decision shall identify the same due date as the original demand for payment.

(v) Amounts shall be due at the earliest of the following dates:

(A) The date fixed under this contract.

(B) The date of the first written demand for payment, including any demand for payment resulting from a default termination.

(vi) The interest charge shall be computed for the actual number of calendar days involved beginning on the due date and ending on—

(A) The date on which the designated office receives payment from the Contractor;

(B) The date of issuance of a Government check to the Contractor from which an amount otherwise payable has been withheld as a credit against the contract debt; or

(C) The date on which an amount withheld and applied to the contract debt would otherwise have become payable to the Contractor.

(vii) The interest charge made under this clause may be reduced under the procedures prescribed in FAR 32.608-2 in effect on the date of this contract.

(j) Risk of loss. Unless the contract specifically provides otherwise, risk of loss or damage to the supplies provided under this contract shall remain with the Contractor until, and shall pass to the Government upon:

(1) Delivery of the supplies to a carrier, if transportation is f.o.b. origin; or

(2) Delivery of the supplies to the Government at the destination specified in the contract, if transportation is f.o.b. destination.

(k) Taxes. The contract price includes all applicable Federal, State, and local taxes and duties.

(l) Termination for the Government's convenience. The Government reserves the right to terminate this contract, or any part hereof, for its sole convenience. In the event of such termination, the Contractor shall immediately stop all work hereunder and shall immediately cause any and all of its suppliers and subcontractors to cease work. Subject to the terms of this contract, the Contractor shall be paid a percentage of the contract price reflecting the percentage of the work performed prior to the notice of termination, plus reasonable charges the Contractor can demonstrate to the satisfaction of the Government using its standard record keeping system, have resulted from the termination. The Contractor shall not be required to comply with the cost accounting standards or contract cost principles for this purpose. This paragraph does not give the Government any right to audit the Contractor's records. The Contractor shall not be paid for any work performed or costs incurred which reasonably could have been avoided.

(m) Termination for cause. The Government may terminate this contract, or any part hereof, for cause in the event of any default by the Contractor, or if the Contractor fails to comply with any contract terms and conditions, or fails to provide the Government, upon request, with adequate assurances of future performance. In the event of termination for cause, the Government shall not be liable to the Contractor for any amount for supplies or services not accepted, and the Contractor shall be liable to the Government for any and all rights and remedies provided by law. If it is determined that the Government improperly terminated this contract for default, such termination shall be deemed a termination for convenience.

(n) Title. Unless specified elsewhere in this contract, title to items furnished under this contract shall pass to the Government upon acceptance, regardless of when or where the Government takes physical possession.

(o) Warranty. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract.

(p) Limitation of liability. Except as otherwise provided by an express warranty, the Contractor will not be liable to the Government for consequential damages resulting from any defect or deficiencies in accepted items.

(q) Other compliances. The Contractor shall comply with all applicable Federal, State and local laws, executive orders, rules and regulations applicable to its performance under this contract.

(r) Compliance with laws unique to Government contracts. The Contractor agrees to comply with 31 U.S.C. 1352 relating to limitations on the use of appropriated funds to influence certain Federal contracts; 18 U.S.C. 431 relating to officials not to benefit; 40 U.S.C. chapter 37, Contract Work Hours and Safety Standards; 41 U.S.C. chapter 87, Kickbacks; 41 U.S.C. 4712 and 10 U.S.C. 4701 relating to whistleblower protections; 49 U.S.C. 40118, Fly American; and 41 U.S.C. chapter 21 relating to procurement integrity.

(s) Order of precedence. Any inconsistencies in this solicitation or contract shall be resolved by giving precedence in the following order:

(1) The schedule of supplies/services.

(2) The Assignments, Disputes, Payments, Invoice, Other Compliances, Compliance with Laws Unique to Government Contracts, and Unauthorized Obligations paragraphs of this clause;

(3) The clause at 52.212-5.

(4) Addenda to this solicitation or contract, including any license agreements for computer software.

(5) Solicitation provisions if this is a solicitation.

(6) Other paragraphs of this clause.

(7) The Standard Form 1449.

(8) Other documents, exhibits, and attachments

(9) The specification.

(t) [Reserved]

(u) Unauthorized Obligations.

(1) Except as stated in paragraph (u)(2) of this clause, when any supply or service acquired under this contract is subject to any End User License Agreement (EULA), Terms of Service (TOS), or similar legal instrument or agreement, that includes any clause requiring the Government to indemnify the Contractor or any person or entity for damages, costs, fees, or any other loss or liability that would create an Anti-Deficiency Act violation (31 U.S.C. 1341), the following shall govern:

(i) Any such clause is unenforceable against the Government.

(ii) Neither the Government nor any Government authorized end user shall be deemed to have agreed to such clause by virtue of it appearing in the EULA, TOS, or similar legal instrument or agreement. If the EULA, TOS, or similar legal instrument or agreement is invoked through an “I agree” click box or other comparable mechanism (e.g., “click-wrap” or “browse-wrap” agreements), execution does not bind the Government or any Government authorized end user to such clause.

(iii) Any such clause is deemed to be stricken from the EULA, TOS, or similar legal instrument or agreement.

(2) Paragraph (u)(1) of this clause does not apply to indemnification by the Government that is expressly authorized by statute and specifically authorized under applicable agency regulations and procedures.

(v) Incorporation by reference. The Contractor’s representations and certifications, including those completed electronically via the System for Award Management (SAM), are incorporated by reference into the contract.

(End of Clause)

ADDENDUM to FAR 52.212-4 CONTRACT TERMS AND CONDITIONS—COMMERCIAL

PRODUCTS AND COMMERCIAL SERVICES

Clauses that are incorporated by reference (by Citation Number, Title, and Date), have the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available.

The following clauses are incorporated into 52.212-4 as an addendum to this contract:

(End of Addendum to 52.212-4)

C.2 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO

IMPLEMENT STATUTES OR EXECUTIVE ORDERS—COMMERCIAL

PRODUCTS AND COMMERCIAL SERVICES (MAR 2023)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204–23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (NOV 2021) (Section 1634 of Pub. L.

115–91).

(3) 52.204–25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (NOV 2021) (Section 889(a)(1)(A) of Pub. L. 115–232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (NOV 2015).

(5) 52.232–40, Providing Accelerated Payments to Small Business Subcontractors (MAR 2023) (31 U.S.C. 3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

(7) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[] (1) 52.203–6, Restrictions on Subcontractor Sales to the Government (JUN 2020), with Alternate I (NOV 2021) (41 U.S.C. 4704 and 10 U.S.C. 4655).

[] (2) 52.203–13, Contractor Code of Business Ethics and Conduct (NOV 2021) (41 U.S.C.

3509).

[] (3) 52.203–15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (JUN 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

[X] (4) 52.204–10, Reporting Executive Compensation and First-Tier Subcontract Awards (JUN 2020) (Pub. L. 109–282) (31 U.S.C. 6101 note).

[] (5) [Reserved]

[] (6) 52.204–14, Service Contract Reporting Requirements (OCT 2016) (Pub. L. 111–117, section 743 of Div. C).

[] (7) 52.204–15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (OCT 2016) (Pub. L. 111–117, section 743 of Div. C).

[X] (8) 52.209–6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (NOV 2021) (31 U.S.C. 6101 note).

[] (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41 U.S.C. 2313).

[] (10) [Reserved]

[] (11) 52.219–3, Notice of HUBZone Set-Aside or Sole-Source Award (OCT 2022) (15 U.S.C. 657a).

[] (12) 52.219–4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

[] (13) [Reserved]

[] (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

[] (ii) Alternate I (MAR 2020) of 52.219-6.

[] (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

[] (ii) Alternate I (MAR 2020) of 52.219-7.

[] (16) 52.219-8, Utilization of Small Business Concerns (OCT 2022) (15 U.S.C. 637(d)(2) and (3)).

[] (17)(i) 52.219–9, Small Business Subcontracting Plan (OCT 2022) (15 U.S.C. 637(d)(4)).

[] (ii) Alternate I (NOV 2016) of 52.219-9.

[] (iii) Alternate II (NOV 2016) of 52.219-9.

[] (iv) Alternate III (JUN 2020) of 52.219–9.

[] (v) Alternate IV (SEP 2021) of 52.219–9.

[] (18)(i) 52.219-13, Notice of Set-Aside of Orders (MAR 2020) (15 U.S.C. 644(r)).

[] (ii) Alternate I (MAR 2020) of 52.219-13.

[] (19) 52.219–14, Limitations on Subcontracting (OCT 2022) (15 U.S.C. 657s).

[] (20) 52.219-16, Liquidated Damages—Subcontracting Plan (SEP 2021) (15 U.S.C.

637(d)(4)(F)(i)).

[X] (21) 52.219–27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (OCT 2022) (15 U.S.C. 657f).

[X] (22) (i) 52.219–28, Post-Award Small Business Program Rerepresentation (MAR 2023) (15 U.S.C. 632(a)(2)).

[] (ii) Alternate I (MAR 2020) of 52.219–28.

[] (23) 52.219–29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (OCT 2022) (15 U.S.C. 637(m)).

[] (24) 52.219–30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (OCT 2022) (15 U.S.C. 637(m)).

[] (25) 52.219-32, Orders Issued Directly Under Small Business Reserves (MAR 2020) (15 U.S.C. 644(r)).

[X] (26) l(26) 52.219–33, Nonmanufacturer Rule (SEP 2021) (15 U.S.C. 657s).

[] (27) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

[X] (28) 52.222–19, Child Labor—Cooperation with Authorities and Remedies (DEC 2022) (E.O. 13126).

[X] (29) 52.222-21, Prohibition of Segregated Facilities (APR 2015).

[X] (30)(i) 52.222–26, Equal Opportunity (SEP 2016) (E.O. 11246).

[] (ii) Alternate I (FEB 1999) of 52.222-26.

[] (31)(i) 52.222–35, Equal Opportunity for Veterans (JUN 2020) (38 U.S.C. 4212).

[] (ii) Alternate I (JULY 2014) of 52.222-35.

[X] (32)(i) 52.222–36, Equal Opportunity for Workers with Disabilities (JUN 2020) (29 U.S.C.

793).

[] (ii) Alternate I (JULY 2014) of 52.222-36.

[] (33) 52.222–37, Employment Reports on Veterans (JUN 2020) (38 U.S.C. 4212).

[] (34) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act

(DEC 2010) (E.O. 13496).

[X] (35)(i) 52.222-50, Combating Trafficking in Persons (NOV 2021) (22 U.S.C. chapter 78 and E.O. 13627).

[] (ii) Alternate I (MAR 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

[] (36) 52.222-54, Employment Eligibility Verification (MAY 2022). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

[] (37)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA- Designated Items (May 2008) (42 U.S.C.6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

[] (ii) Alternate I (MAY 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

[] (38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (JUN 2016) (E.O. 13693).

[] (39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (JUN 2016) (E.O. 13693).

[] (40)(i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (JUN 2014) (E.O.s 13423 and 13514).

[] (ii) Alternate I (OCT 2015) of 52.223-13.

[] (41)(i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (JUN 2014) (E.O.s 13423 and 13514).

[] (ii) Alternate I (JUN 2014) of 52.223-14.

[] (42) 52.223-15, Energy Efficiency in Energy-Consuming Products (MAY 2020) (42 U.S.C.

8259b).

[] (43)(i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (OCT 2015) (E.O.s 13423 and 13514).

[] (ii) Alternate I (JUN 2014) of 52.223-16.

[X] (44) 52.223–18, Encouraging Contractor Policies to Ban Text Messaging While Driving

(JUN 2020) (E.O. 13513).

[] (45) 52.223-20, Aerosols (JUN 2016) (E.O. 13693).

[] (46) 52.223-21, Foams (JUN 2016) (E.O. 13693).

[] (47)(i) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

[] (ii) Alternate I (JAN 2017) of 52.224-3.

[X] (48)(i) 52.225-1, Buy American—Supplies (OCT 2022) (41 U.S.C. chapter 83).

[] (ii) Alternate I (OCT 2022) of 52.225–1.

[] (49)(i) 52.225-3, Buy American—Free Trade Agreements—Israeli Trade Act (DEC 2022) (19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108- 302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

[] (ii) Alternate I [Reserved].

[] (iii) Alternate II (DEC 2022) of 52.225-3.

[] (iv) Alternate III (JAN 2021) of 52.225-3.

[] (v) Alternate IV (OCT 2022) of 52.225-3.

[] (50) 52.225–5, Trade Agreements (DEC 2022) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

[X] (51) 52.225-13, Restrictions on Certain Foreign Purchases (FEB 2021) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

[] (52) 52.225–26, Contractors Performing Private Security Functions Outside the United States (OCT 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

[] (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C.

5150).

[] (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency…