SOL 72066824Q00045 - KITCHEN EQUIPMENT EXO signed.pdf

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

1. REQUISITION NUMBER PAGE 1 OF

2. CONTRACT NO. 3. AWARD/EFFECTIVE

DATE

4. ORDER NUMBER 5. SOLICITATION NUMBER 6. SOLICITATION ISSUE

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME b. TELEPHONE NUMBER (No collect calls)

8. OFFER DUE DATE/

9. ISSUED BY

13b. RATING

14. METHOD OF SOLICITATION

CODE

15. DELIVER TO 16. ADMINISTERED BY CODE

18a. PAYMENT WILL BE MADE BY CODE17a. CONTRACTOR/

OFFEROR

CODE

FACILITY

CODE

CODE

TELEPHONE NO.

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED

RFQ IFB RFP

SEE ADDENDUM

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Govt. Use Only)

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED

29. AWARD OF CONTRACT: REF. OFFER

DATED . . YOUR OFFER ON SOLICITATION

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR

30b. NAME AND TITLE OF SIGNER (Type or print) 30c. DATE SIGNED

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

31b. NAME OF CONTRACTING OFFICER (Type or print) 31c. DATE SIGNED

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA - FAR (48 CFR) 53.212

10. THIS ACQUISITION IS UNRESTRICTED OR

NAICS:

SIZE STANDARD:

13a. THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700)

SET ASIDE: % FOR:

11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

12. DISCOUNT TERMS

ARE ARE NOT ATTACHED

ARE ARE NOT ATTACHED

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

8 (A)

EDWOSB

WOMEN-OWNED SMALL BUSINESS

(WOSB) ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

HUBZONE SMALL

BUSINESS

SMALL BUSINESS

REQ-668-24-000105 16

72066824Q00045

See page 3 See page 3 720668

Kololo street, 2nd block next to European Union US Embassy Juba, South Sudan USAID/SOUTH SUDAN/EXO

Procurement to suppy Kitchen Equipment for US Embassy Juba, South Sudan

SAMUEL CARTER

DATE

06/13/2024

LOCAL TIME

07/05/2024

2300 CAT

720668

USAID/South Sudan 4420 Juba Place Washington DC 20521-4420 00000

Issue Date: June 13th, 2024

Deadline for Questions: June 20th, 2024, COB 5p.m. (CAT) Juba Time

Closing Date and Time: July 5th, 2024, at 11p.m. (CAT) South Sudan Time. Late submissions WILL NOT be considered.

REQUEST FOR QUOTATION NO.:72066824Q00045 – KITCHEN EQUIPMENT

Dear Offerors,

(i) This posting serves as a Combined Synopsis/Solicitation for Commercial Items prepared in accordance with the Federal Acquisition Regulation (FAR) 12.6, Streamlined Procedures for Evaluation and Solicitation for Commercial Items, as supplemented with additional information included in this notice.

(ii) This announcement constitutes the only solicitation.

(iii) This is a Request for Quotations only. Issuance of this RFQ does not in any way obligate

USAID to make an award or pay for costs incurred by potential offerors in the preparation and submission of an offer. Further, the Government reserves the right to reject any or all quotations received, and to negotiate separately with an offeror, if such action is considered to be in the best interest of the Government.

(iv) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2021-06 (06/10/2021). It is the responsibility of the Offeror to be familiar with the applicable clauses and provisions.

(v) USAID/South Sudan – General Services Office (GSO) is seeking quotations from reputable firms to supply Kitchen equipment as per the attached details on continuation pages below.

(vi) The associated North American Industrial Classification Code (NAICS) for this procurement is 423490 - Other Professional Equipment and Supplies Merchant Wholesalers 150

(vii) The US Mission in South Sudan is exempt from all Government taxes.

(viii) The Government will award a Purchase Order resulting from this solicitation to the responsible offeror based on the Lowest Price Technically Acceptable (LPTA) process.

(ix) Quotations in response to this RFQ must be priced on a fixed-price, all-inclusive basis, including delivery and all other costs. Pricing must be presented in United States Dollars (USD).

Offers must remain valid for not less than thirty (30) calendar days after the offer deadline.

Offerors are requested to provide quotations on their official quotation format or letterhead.

(x) Payment: Based on the prompt payment act, payment will be processed, and wire transferred to the vendor account within 30 days after receipt, acceptance, certification of goods/services and submission of invoice plus a copy of the purchase order electronically to email address: jubapayable@usaid.gov. NO ADVANCE PAYMENT.

(xi) The successful offeror must comply with the following applicable commercial item terms and conditions, which are incorporated herein by reference:

• The provision at FAR 52.212-1, Instructions to Offerors -Commercial Items.

• The provision at FAR 552.212-2, Evaluation.

• FAR Clause 52.212-4, Contract Terms and Conditions—Commercial Products and Commercial Services applies, as well as FAR Clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders—Commercial Products and Commercial Services, Paragraph (a), and the following clauses in Paragraph (b): 52.203-6; 52.204-10; 52.209-6; 52.209-9; 52.209-9; 52.222-3;

52.222-21; 52.222-26; 52.222-35; 52.222-36; 52.222-40; 52.222-50; 52.223-18;

52.225-13; 52.232-33.

• FAR 52.204-26 Covered Telecommunications Equipment or Services- Representation

The full text of the referenced FAR Clause may be accessed electronically at https://www.acquistion.gov/far/.

(xii) Submission method: Electronically - email your offer or questions to jolando@usaid.gov, npoggo@usaid.gov with copy to jubaprocurements@usaid.gov

IMPORTANT NOTE: All vendors dealing with the United States Government MUST be registered in the SAM (System for Award Management) Database https://www.sam.gov prior to contract award pursuant to FAR provision 52.204-7. Therefore, prospective offerors are encouraged to register prior to the submission of quotations/proposals. Only vendors who have fully complied with this requirement are eligible for award.

Regards, USAID/South Sudan/Procurement Office mailto:jubapayable@usaid.gov https://www.acquistion.gov/far/ mailto:jolando@usaid.gov

KITCHEN EQUIPMENT

S/N Description Qty U/Cost Total Cost

1 Trash Receptacle-32gal, Dolly, Lid 1 EA

Walk-In Cooler/Freezer Combo (Custom Model 195383 American Panel Two Compartment Walk-In, model #195383. 230-V/50Hz/1-ph Overall exterior dimensions to be 16'-4.5" X 15'-5" X 8'-6" high. Freezer interior dimensions to be 15'-8.5" X 7'-2.5" X 7'-10.25" high with 4" Insulated Floor. Interior floor finish to be .100 Smooth Aluminum. Cooler interior dimensions to be 15'-8.5" X 7'-2.5" X 7'-10.25" high with 4" Insulated Floor. Interior floor finish to be .100 Smooth Aluminum. Interior wall finish to be 26 ga.

white stucco galv. steel, interior ceiling to be 26 ga. white stucco galv. steel, exposed exterior to be 20 ga. stainless steel, #3 finish, unexposed exterior to be 26 ga. stucco acrylume. (2) 34" X 77" flush mount magnetic infitting door with cam-rise hinges, padlockable deadbolt handle (exterior doors only), closer, brushed hardware, fully programmable Intelligent Controller (IC) featuring audio/visual temperature alarm with digital thermometer, high & low set points, energy saving (more) - similar or superior

7 LO

Refrigeration-Medium Temp, 230-V/50Hz/1-ph - Dimension: L 63 1/4" X W 43 1/4" X H 35" Walk-In Cooler Refrigeration System – Combined with item 4 in a Rack System

1 EA

Refrigeration-Low Temp. 230-V/50Hz/1-ph - Dimension: L 63 1/4" X W 43 1/4" X H 35" Walk-In Freezer Refrigeration System – Combined with item 3 in a Rack System

Storage Shelving (Walk-In Cold Storage) (Advance Tabco Model EG-2436-X Dimensions: 1(h) x 36(w) x 24(d) Special Value Wire Shelving, 36"W x 24"D, heavy duty, green epoxy coated, NSF 12 ea Model EG-2442-X Special Value Wire Shelving, 42"W x 24"D, heavy duty, green epoxy coated, NSF 44 ea Model EG-2448-X Special Value Wire Shelving, 48"W x 24"D, heavy duty, green epoxy coated, NSF 32 ea Model EGP-74-X Special Value Wire Shelving Post, 74"H, numbered, heavy duty, green epoxy coated, adjustable feet, NSF 52 pk Model EC-30-X Special Value Wire Shelving S Hooks, for add-shelving (package of 2) -model similar or superior

1 LO

Pan Rack

"STAININLESS STEEL UPRIGHT RACK FABRICATED

STAINLESS STEEL UPRIGHT RACK FABRICATED MADE OF STAINLESS STEEL AISI - 304 GRADE DIM :

1500 X 500 X 1800 MM

CAPACITY: 4 TIER SHELVES TYPE: PLAIN SHELVES" - similar or superior

6 EA

Air Curtain-42" (Mars Air Systems Model LPN242-1UU-OB LoPro Series 2 Air Curtain, for 42" wide door, unheated, galvanized steel cabinet, obsidian black powder coat finish, (1) 1/6 HP motor, 220v/50/1-ph, ETL 1 ea 5 year warranty, standard 1 ea Mechanical switches 1 ea Model 99-014 Door Limit Switch, indoor, plunger/roller type, remote mounted,1 HPmax,250v,20.0a,NEMA 2) - similar or superior

Platform Scale

"PLATFORM SCALE (AP101), MODEL: AP101 (D15APY1-150W)

PLATFORM SCALE (APlOl) MODEL: AP101 (DlSAPY0l-lS0W)

BRAND: ATCO

CAPACITY: 150 KG

ACCURACY: lOGM

PLATFORM SIZE: 450 X 600MM

PLATFORM: SS (STAINLESS STEEL)

INDICATOR: LED (LIGHT EMITTING DIODE)

NET WEIGHT: 19.5 KG

GROSS WEIGHT: 21.5

BOX DIMENSION : (L=90CM, W=51CM,H=19CM) ADVANCED MICROCONTROLLER BASED DESIGN

BRIGHT RED LED DISPLAY

INBUILT RECHARGEABLE LONG LASTING BATTERY BACKUP AUDIO-VISUAL OVERLOAD

INDICATION

PARTS COUNTING FACILITY

MULTIPLE WEIGHING UNITS IN KG AND POUNDS

100% TARE FACILITY

HIGH QUALITY LOAD CELL TO GIVE FAST ACCURATE AND LINEAR WEIGHMENTS.

RUGGED STAINLESS STEEL PLATFORM " - similar or superior

Work Table "WORK TABLE WITH BACKSPLASH UNDER SHELF ZZJYGZ-120WSWork Table With Backsplash Under Shelf Zzjygz-120ws Brush Finish Thickness 1 mm-Material Stainless Steel 304Make: ESCOFFIER, Model Number Zzjygz-120ws " - similar or superior

3 EA

Storage Shelving (Dry Storage) (Advance Tabco Model EC-2436-X Dimensions: 1(h) x 36(w) x 24(d) Special Value Wire Shelving, 36"W x 24"D, heavy duty, chrome plated finish, NSF.

5 ea Model EC-2448-X Special Value Wire Shelving, 48"W x 24"D, heavy duty, chrome plated finish, NSF 15 ea Model EC-2460-X Special Value Wire Shelving, 60"W x 24"D, heavy duty, chrome plated finish, NSF 12 ea Model ECP-74-X Special Value Wire Shelving Post, 74"H, numbered, heavy duty, chrome plated, adjustable feet, NSF 20 pk Model EC-30-X Special Value Wire Shelving S Hooks, for add-shelving (package of 2) -similar or superior

Dunnage Rack-21"x60" Cambro Model DRS600480 Dimensions: 12(h) x 60(w) x 21(d) S-Series Dunnage Rack, slotted top, 3000 lb. load capacity, 21"D x 60"W x 12"H, polypropylene, one-piece, seamless double wall construction, includes (1) Camlink®, 4" square legs, speckled gray, NSF. - similar or superior

2 EA

Hand Sink-Knee Pedal Hands Free Faucet (Krowne Model HS-16 Dimensions: 33.5(h) x 16.19(w) x 15.25(d) Hand Sink, wall mount, 16-3/16"W x 15-1/4"D x 33-1/2"H O.A., 8"H backsplash, 12-1/2" wide x 9-3/4" front-to-back x 5-5/8" deep bowl, splash mount gooseneck spout with knee pedal valves (low lead compliant), stainless steel skirt on front & sides, soap & towel dispenser, includes mounting bracket, stainless steel construction, NSF - similar or superior

5 EA

Trash Receptacle-Tall Slim (Winco Model PTC-23K Slender Trash Can, 23 gallon, 20-1/8”L x 10-7/8”W x 29-7/8”H, HDPE, black (lid not included) -

12 EA

Refrigerator-1 Section (True Mfg. - General Foodservice Model TGN-1R-1S Dimensions: 78.38(h) x 27(w) x 29.5(d) Refrigerator, reach-in, one-section, (1) solid door, (3) PVC coated adjustable wire shelves, interior lighting, stainless steel door, stainless steel front, aluminum sides, clear coated aluminum interior with stainless steel floor, 64mm castors, R290 Hydrocarbon refrigerant, 230v/50/1-ph, .65 amps, CE, Made in USA, ENERGY STAR®.

2 ea Self-contained refrigeration standard 2 ea Door hinged right standard - similar or superior

Kettle-Double, Tilting, 12 gal with Stand (Cleveland Range Model TKET12T Tilting Kettle, electric, twin unit, countertop, 12 gallon (45L each) capacity each, 2/3 steam jacket design, self-contained, lever style-tilting, anti-drip pour spout, IPX6 water protection controls, selflocking marine style safety latch, reinforced rolled rim, center support console, stainless steel construction with 316 series stainless steel liner, 50 PSI.

1 ea 1-year parts & labor warranty, standard 1 ea Performance start-up included at customer request after equipment is installed (Free Water Quality Check included) (contact Cleveland Sales Representative for details) 1 ea Standard wattage 1 ea (VOK1) 400-V/50Hz/3-ph, for export, 24kw/33.4a 1 ea Model CL12 Lift-Off Cover, 12 gallon, per each kettle 1 ea Model DPK9 Double Pantry Faucet, with swing spout & mounting bracket for tilting kettles 1 ea Model ST55T Equipment Stand, open base with sliding drain drawer & splash screen, 55" x 20", (more) - similar or superior

Work Table-SS, 1 Sink, Overshelf-Pot Shelf Custom Model WORK TABLE Custom Fabricated Work Table with 1 Sink Bowl · Dimensions of 6'L x 30" wide.

· 14ga/304 Stainless Steel Top.

· With 2” x 10” back splash.

· With marine edge front, left, and right end.

· With (1) integral sink bowl-20"l x 20"w x 12"D fully welded/fabricated.

· Provide support bracket for 1 twist waste drain(Item 18-by Owner).

· Sink bowl to be centered on table. - similar or superior

17 Faucet-Splash Mount, 1O" Spout 4 EA

Waste Drain-Twist (Krowne Model 22-204 Krowne Twist Waste with 1-1/4" Overflow Outlet with Cap, 3-1/2" sink opening, 2" NPS male threaded with 1-1/2" female threaded drain outlet (no adapter required), 4-1/2" flange, stainless steel strainer, flange & handle) - similar or superior

8 EA

COMMERCIAL MICROWAVE OVEN

MENU MASTER MODEL: RCS - 511 TS

CAPACITY: 34 LTR DIM: 558 X 482 X 349 MM

4 COOKING STAGES DIGITAL DISPLAY WITH COUNT DOWN TIMERSTAINLESS STEEL INTERIOR &

EXTERIOR

UPTO 100 PROGRAMMABLE MENU ITEMS

ORIGIN IN CHINA UNDER STRICT SUPERVISION OF ACP - U.S.A 230-V/50Hz/1-ph / 1100 W " -

4 EA

COMBI OVEN

("COMBI MASTER PLUS OVEN-ELECTRIC RATIONAL, MADE IN GERMANY. MODEL: CMP-061

COMBI MASTER PLUS OVEN - ELECTRIC RATIONALMADE IN GERMANY MODEL: CMP - 061

ECAPACITY: 6 X 1/1 GN OR 12 X 1/2 GN DIM : 847 X 771 X 782 MM MANUAL CLEANING

PROGRAM HAND SHOWER WITH AUTOMATIC RETRACTING SYSTEMUSB INTERFACECORE

TEMPERATURE PROBE WITH 1- POINT MEASUREMENTSO PROGRAMS WITH UP TO 6 STEPS CAN

BE SELECTED AS REQUIREDCOOL-DOWN FOR FAST AND RELIABLE COOLING OF THE COOKING

CABINET, 415-V/50Hz/3-ph NAC / 11 KW " - similar or superior

Washdown Faucet/Hose Reel Krowne Model 24-503 Dimensions: 40(h) x 6(w) x 14.5(d) Krowne Royal Series Pre-Rinse Hose Reel Assembly, 26"W x 40"H O.A., 8" center raised deck mount faucet (low lead compliant), open stainless steel with wall plate for easy mounting. - similar or superior

Work Table-SS, Overshelf Custom Model WORK TABLE Custom Fabricated Work Table · Dimensions of 8'L x 30" wide.

· 14ga/304 Stainless Steel with 2" x 10"H backsplash.

· Backsplash to be fully enclosed back and ends with16ga/304 Stainless Steel

· Base to be built with 16ga/304 Stainless Steel 4'L undershelf-right with 16ga/304 Stainless Steel legs and with stainless steel bullet feet and gussets.

· Left 4' under table to be open base with pipe frame.

· Provide 16ga/304 stainless steel cantilever mounted single overshelf , 15"w x 8'L where shown. · Fully welded construction required, except that welded leg/base undershelf structure and overshelf structure are to be removable from top to facilitate installation at project site. · Table to be constructed to NSF standards and labeled as such. - similar or superior

INGREDIENT BIN

Cambro Model IBS20148 Dimensions: 28(h) x 13(w) x 29.5(d) Ingredient Bin, mobile, 21-gallon capacity, molded polyethylene with sliding cover, S-hook on front (scoop NOT included), (4) 3" heavy duty casters (2 front swivel, 2 fixed), with bin securely attached to base plate, white with clear cover, NSF. - similar or superior

6 EA

Work Table-SS, Overshelf.

Custom Model WORK TABLE Custom Fabricated Work Table · Dimensions of 8'L x 30" wide.

· 14ga/304 Stainless Steel with 2" x 10"H backsplash.

· Backsplash to be fully enclosed back and ends with16ga/304 Stainless Steel.

· Base to be built with 16ga/304 Stainless Steel 8'L undershelf with 16ga/304 Stainless Steel legs and with stainless steel bullet feet and gussets.

· Provide 16ga/304 stainless steel cantilever mounted single overshelf , 15"w x 8'L where shown. · Fully welded construction required, except that welded leg/base undershelf structure and overshelf structure are to be removable from top to facilitate installation at project site. · Table to be constructed to NSF standards and labeled as such. similar or superior

POTATO PEELER

("KTC POTATO FEELER, DIM: 475x540x785MM, CAPACITY:15 KG KTC POTATO PEELER :

- Heavy duty Potato Peeler. High efficiency, each loaded potato peeling takes only 1 '""2minutes. Fine and elegant appearance, easy use

- Dimension: 475x540x785MM

- Capacity: 15 KG

- Power Supply: 220v /50hz /l-ph

- Power Rating: 0.75KW Make: KTC-CH, Model#: PP15" - similar or superior

Work Table-SS, Over shelfCustom Model WORK TABLECustom Fabricated Work Table· Dimensions of 5'L x 24" wide.· 14ga/304 Stainless Steel with 2"W X 10"H Back and Left End Splash.Base to be built with 16ga/304 Stainless Steel 5'L undershelf with 16ga/304 Stainless Steel legsand with stainless steel bullet feet and gussets.· Provide 16ga/304 stainless steel cantilever mounted single overshelf , 15"w x 5'L whereshown. · Fully welded construction required, except that welded leg/base undershelf structureand overshelf structure are to be removable from top to facilitate installation at project site. ·Table to be constructed to NSF standards and labeled as such. - similar or superior

2 Comp Sink, Pot Rack-Shelf Custom Model 2 COMPARTMENT SINK Custom Fabricated 2 Compartment Sink with Pot Shelf Rack Dimensions of 7-0”L x 24” wide.

· 14ga/304 Stainless Steel Top.

· With 7'L X 2”W x 10”H rear splash.

· Front, right, and left to have 3” tall (turned up) edges with 1-1/2” rolled lip.

· With (2) integral sink bowls-18"L x 18"W x 12"D fully welded/fabricated.

· Provide support brackets for 2 twist waste drains(Item 18-by Owner).

· With approx 24" drainboard left and right.

· Base to be built with ((2-24" long-16ga/304 Stainless Steel undershelf (only under drainboards)

· With 16ga/304 Stainless Steel legs and with stainless steel bullet feet and gussets.

· Punch (1) set holes in backsplash as shown, 8" OC to accommodate faucet (Item 17-by Owner).

· Provide 16ga/304 stainless steel cantilever splash mounted shelf-with pot hanger bar with SS pot hooks, 7'L where shown

· Fully welded construction required, except that welded leg/base undershelf structure (more) -

3 Comp Sink, Pot Rack Custom Model 3 COMPARTMENT SINK Custom Fabricated 3 Compartment Sink with Pot Rack Dimensions of 11'-0”L x 26” wide.

· 14ga/304 Stainless Steel Top.

· With 9'L X 2”W x 10”H rear splash (RIGHT)

· Front, right, left and 2'L rear left to have 3” tall (turned up) edges with 1-1/2” rolled lip.

· With (3) integral sink bowls-20"L x 20"W x 14"D fully welded/fabricated.

· Provide support brackets for 3 twist waste drains(Item 18-by Owner).

· With approx 36" drainboard left and right.

· Base to be built with ((2-36" long-16ga/304 Stainless Steel undershelf (only under drainboards).

· With 16ga/304 Stainless Steel legs and with stainless steel bullet feet and gussets. - similar or superior

Storage Shelving (Warewash) Advance Tabco Model EG-2460-X Dimensions: 1(h) x 60(w) x 24(d) Special Value Wire Shelving, 60"W x 24"D, heavy duty, green epoxy coated, NSF 16 ea Model EGPC-74-X Special Value Wire Shelving Post, 74"H, numbered, heavy duty, green epoxy coated, for use with casters, NSF 2 st Model EC-26-X Special Value Wire Shelving Stem Casters, (4) 5" swivel poly, (2) with brakes, include donut bumpers (for wire shelving only) - similar or superior

Clean Dishtable-Overshelf Custom Model CLEAN DISHTABLE Custom Fabricated Straight Clean Dishtable and Overshelf.

· Right to Left flow direction

· Dimensions of 6'-0”L x 30" wide and tapered to fit dishwasher as shown.

· 14ga/304 Stainless Steel Top.

· With 2” x 10” rear splash at wall.

· Front and left end of table to have 3” tall (turned up) edges with 1-1/2” rolled lip.

· Base to include 16ga/304 Stainless Steel undershelf, with 16ga/304 Stainless Steel legs and with stainless steel bullet feet and gussets.

· Provide 16ga/304 stainless steel cantilever splash mounted overshelf, 15"W x 60"L where shown

· Fully welded construction required, except that welded leg/base structure and overshelf structure are to be removable from top to facilitate installation at project site.

· Provide “Z” clips constructed of 16ga/304 stainless steel to anchor rear splash to walls · Table to fit warewasher: Portabianco PBW1000 Guillotine Type · Table to be constructed to NSF standards (more) - similar or superior

Hood System-Condensate (Warewash)Captive-Aire Model HOOD 31Condensate Hood, 415- V/50Hz/3-ph4'-0"L x 4'-0" x 2'-0"H Type II Stainless Steel Hood Canopy-Exhaust OnlyExhaust FanExhaust RiserField WrapperFace Mount SwitchS/S BacksplashExport Crating - similar or

Warewasher PORTABIANCO HOOD TYPE DISH WASHER,230-V/50Hz/1-ph - DIM: 2718 X 793 X 1929MM - Similar or superior

Pre-Rinse Faucet

PRE-RINSE FAUCET ASSEMBLY

Krowne Model 17-108WL Dimensions: 35(h) Krowne Royal Series pre-rinse Assembly, wall mount, 8" centers, spring action flexible gooseneck, 35"H stainless steel hose with 15" overhang & 1.2 GPM spray head, built in check valves, includes wall bracket & mounting kit, chrome plated brass base, low lead compliant, includes internal check valves to prevent backflow & cross contamination, NSF (interchangeable with most brands) (ships pre-assembled) - Similar or superior

Soiled Dishtable-Pre-Rinse Sink, Rack Shelf Custom Model SOILED DISHTABLE Custom Fabricated Soiled Dishtable-L Shaped with Landing Deck, Rack Shelf & Pre-Rinse Sink · Dimensions of 5'-7"L x 30"W x 4'L x 38” W.

· 14ga/304 Stainless Steel Top.

· With 2” x 10” rear splash

· Right to Left Operation

· Front edge to include dish landing deck and remaining edges to have 3” tall (turned up) edges with 1-1/2” rolled lip.

· With (1) integral pre-rinse sink bowl-20"l x 20"w x 6”D fully welded/fabricated.

· With removeable scrap basket & rack guides.

· With fabricator provided rubber scrap block incorporated into table.

· Left end to be fabricated with mitered rear corner and turn-down to attach to warewasher

· Base to be open and built with 16ga/304 Stainless Steel pipe legs with stainless steel bullet feet and gussets.

· Punch (1) set holes in backsplash as shown, 8" OC to accommodate pre-rinse faucet (Item 33-by Owner). - Similar or superior

Heat Lamp "WARMING LAMP, ROLLER GRILL MADE IN FRANCE, MODEL:RH 1, DIM: 630x410x565MM WARMING LAMP ROLLER GRILL MADE IN FRANCE MODEL: RH lDIM : 630 X 410 X 565 MM INFRARED QUARTZ LAMP (1050° C) 220 - 240 VOLT/ 50 - 60 HZ/ 1 PH/ 0.6 KW WITH 1 EACH OF HEATER WITH TEMPERED QUARTZ TUBE COVERING (AS SPARE) " - similar or superior

Multi Contact Grill "KRAMPOUZ MULTI CONTACT GRILL (EASY CLEAN SYSTEM), DIM: 240x370x360MM, MAKE:

KRAMPOUZ-FRANCE, MODEL:

GECID3AO KRAMPOUZ MULTI CONTACT GRILL (EASY CLEAN SYSTEM):

The ""Easy Clean system"" concept offers perfect hygiene. Heating Element Pack. technology for perfect heat distribution. Thermostatic. control from 50°C to 300°C for precision cooking. Heat Insulation of the elements for a consistent distribution of heat.

- Dimension: 240x370x360 mm

- Power Rating: 220v-240 v /50-60HZ

- Power Rating: 300 W Make: KRAMPOUZ-FRANCE, Model#: GECID3AO" - Similar or superior

Waffle Iron

"WAFFLE IRON - DOUBLE ROLLER GRILL, MADE IN FRANCE. MODEL: GED 75; DIM:

550x440x230MM

WAFFLE IRON - DOUBLE

ROLLER GRILL MADE IN FRANCE

MODEL: GED 75DIM: 550 X 440 X 230 MM

MADE OF STAINLESS STEEL AISI - 304

TABLE TOP, HEAVY DUTY

COOKING SURFACE: 100 X 170 X 22 MM

THE HIGHLY CONDUCTIVE CAST IRON PLATES SPREAD HEAT EVENLY AND GIVE GOLDEN, CRISPY

WAFFLESMOULD FEATURING

3 X 5 SQUARES (20 X 25 MM)

220 - 240 V / 50 HZ / 1 PH / 3.2 KW " - Similar or superior

Soup Kettle"SOUP KETTLE FORCAR MADE IN ITALY, CAPACITY: 10 LTR, DIM: 350MM DIA & 360

MM HEIGHTSOUP KETTLE FORCAR MADE IN ITALYCAPACITY: 10 LTRDIM: 350 MM DIA & 360

MM HEIGHT HEAVY DUTY & TABLE TOPTEMPERATURE CONTROLLED HIGH THERMOSTATBLACK

FINISHCONTAINER & LID IN STAINLESS STEEL 220 - 240 V / 50 HZ/ 1 PH/ 600 W " - Similar or

Salamander Oven

"TABLETOP ELECTRIC SALAMANDERS WITH MOBILE TOP, IDEAL FOR GRILLING, ROASTING OR

KEEP FOOD WARM BEFORE SERVING, DIM: 600x450x500MM Table top electric salamanders with mobile top, ideal for grilling, roasting or keep food warm before serving Stainless steel construction, satin polished. Mobile top with adjustable height. Tubular heating element, easy to cleaning. Energy regulator for temperature: range: SO+ 300 •c. Possibility to work in continuous cycle. Heating area: 600 x 350

mm. Two independent zones. Grid and drip tray. OPTION: Wall support element.

Dimension: 600x450x500mm Cooking area: 600x350 - GN 1/1 Power rating: 4KW Power Supply: 230V/50HZ/1PH Make: FAGOR-SPAIN, Model#: SE-60-0 " - Similar or superior

1 LO

40 Refrigerator-Undercounter - W 1870mm x D 700mm X H 850mm/920mm 1 EA

41 Chef Counter-Module 1 - L 6ft 7 3/4" X W 4ft 3" X H 3ft 1 EA

42 Heat Strip-4'-0" 2 EA

Conveyor Toaster "HATCO CONVEYOR TYPE TOASTER, 230-V/50Hz/1-ph - DIM: 387x368x416MM, MAKE: KHATCO-

USA, MODEL #: HATCTM10H

HATCO CONVEYOR TYPE TOASTER:

- 4 position toast selector Electronic infinite controls to regulate top & bottom controls. Power save mode. Capacity 180-800 slices per hour. Insulation and an interior fan provide cool surface temperatures. Efficient design allows front or rear discharge. Toasts bread or buns.

- Dimension: 387x368x416 mm Make: HATCO-USA, Model#: HATCTMlOH" - Similar or superior

44 Chef Counter-Module 2 - L 4 ft 6 5/16" X W 4ft 3" X 3ft 1

Sandwich Prep Refrigerator-12 pan True Mfg. - General Foodservice Model TSSU-48-12-HC~SPEC3 Dimensions: 36.75(h) x 48.38(w) x 30.13(d) SPEC SERIES® Sandwich/Salad Unit, (12) 1/6 size (4"D) poly pans, SPEC Package 3 includes:

stainless steel insulated cover, 11-3/4"D cutting board, (2) full doors with locks, (4) gray PVC coated adjustable wire shelves, digital temperature control and display, stainless steel front, sides & back, stainless steel interior liner & stainless steel floor with coved corners, 5" castors, R290 Hydrocarbon refrigerant, 1/3 HP, 230-V/50Hz/1-ph, 5.8 amps, NEMA 5-15P, cULus, UL EPH Classified Made in USA 1 ea Self-contained refrigeration standard - similar or superior

1 EA

46 Chef Counter-Module 3 1 EA

47 Heat Strip-3'-6" 1 EA

48 Faucet - Gooseneck Spout Krowne Model 15-401L Krowne Royal Series Faucet, deck mount, 4" centers, 6" gooseneck spout, 1/4 turn ceramic cartridge valve, low lead compliant, NSF, includes internal check valves to prevent backflow & cross contamination - Similar or superior

Deep Fryer

ELECTRIC DEEP FAT FRYER

FAGOR, MADE IN SPAIN MODEL: F - E9221, 380-415 V/50Hz/3-ph

CAPACITY: 21 + 21 LTR DIM: 800 X 930 X 850 MM

MADE OF STAINLESS STEEL AISI - 304 GRADE DOUBLE WELL WITH TWOBASKETS IN EACH WELL

BASKET SIZE : 132 X 338 X 132 MM

THERMOSTAT TEMP CONTROL 602 CTO 2002 CSAFETY THERMOSTAT & DRAINAGE TRAPWITH

CLOSED CABINET" - Similar or superior

Griddle

"ELECTRIC TABLE TOP GRIDDLE FAGOR MADE IN SPAIN,MODEL: FTE7-10(L-R), DIM:

700x775x290MM

ELECTRIC TABLE TOP GRIDDLE

FAGOR MADE IN SPAIN

MODEL: FTE7-10 (L+R)DIM: 700 X 775 X 290 MM MADE OF STAINLESS STEEL AISI - 304½

SMOOTH +½ RIBBED CAST IRON HOT-PLATE SHIELDED ELEMENTS IN STAINLESS STEEL

THERMOSTAT CONTROL OF THE HOT- PLATE TEMPERATURE 1202 C- 3102 CFAT COLLECTOR

UNDER THE GRILL 400-V/50Hz/3-ph/ 9 KW " - Similar or superior

Equipment Stand.Advance Tabco Model ES-305 Dimensions: 25(h) x 60(w) x 30(d)Equipment Stand, 60"W x 30"D x 25"H (overall), 24" working height, 14-gauge 304 stainlesssteel top with 1"H up-turn on sides & rear, 18 gauge adjustable stainless steel undershelf,stainless steel legs with adjustable stainless steel bullet feet, NSF1 ea Model TA-59 Modify 30" deep equipment stand to 36" deep (per table)5 ft Model TA-94 16-gauge 304 stainless steel undershelf upgrade (per linear foot) - Similar or superior

Range-6 burners, Oven

"ELECTRIC 6 HOT PLATE WITH OVEN, LOTUS MADE IN ITALY, MODEL: CF6-712ETV, DIM:

1200x700x900MM

ELECTRIC 6 HOT PLATE WITH OVEN

LOTUS MADE IN ITALY MODEL: CF6 - 712 ETV

DIM: 1200 X 700 X 900 MM

MADE OF STAINLESS STEEL AISI -304

CAPACITY: 6 HOT PLATES CAST IRON HOT- PLATES WITH SHIELDED ELEMENTS6 NOS OF (6 X 2.6 KW) ROUND TYPE HOT PLATESEQUIPPED WITH A TRADITIONAL ELECTRIC OVEN & A RIGHT SIDE NEUTRAL CLOSED CABINET 400 V / 50 HZ/ 3 PH/ 20.6 KW " - Similar or superior

Hood System (Main Cookline)

Captive-Aire Model HOOD 53 Hood System - Cookline 15'-0"L x 5'-0"W x 2'-0"H Type I Stainless Steel Hood Canopy - Exhaust with Makeup Air Plenum Utility Cabinet Exhaust and Supply Fans Exhaust Riser Supply Riser SS Grease Filters LED Lights Field Wrapper Electrical Package Face Mount Switch S/S Backsplash Export Crating - Similar or superior

Storage Shelving (Kitchen Supplies)

Advance Tabco Model EC-1848 Dimensions: 1(h) x 48(w) x 18(d) Special Value Wire Shelving, 48"W x 18"D, heavy duty, chrome plated finish, NSF 10 ea Model EC-1860 Special Value Wire Shelving, 60"W x 18"D, heavy duty, chrome plated finish, NSF 8 ea Model ECP-74 Special Value Wire Shelving Post, 74"H, numbered, heavy duty, chrome plated, adjustable feet, NSF 10 pk Model EC-30 Special Value Wire Shelving S Hooks, for add-shelving (package of 2) - Similar or superior

Mixer-Planetary, 20qt Hobart Model HL200-2STD 200-240/50/60/1; Bench type mixer; with bowl, beater, & whip; US/EXP configuration - Legacy Planetary Mixer, Bench, 20 quart, (3) fixed speeds plus stir speed, gear-driven transmission, 15-minute SmartTimer™, #12 taper hub, manual bowl lift, stainless steel bowl, aluminum "B" beater, stainless steel "D" wire whip, stainless steel bowl guard, 1/2 hp - Similar or superior

1 EA

56 Mixer Stand with Attachment Tree 1 EA

57 Baker's Table-Overshelf 1 EA

Work Table-SS, 1 Sink

Custom Model WORK TABLE Custom Fabricated Work Table with 1 Sink Bowl · Dimensions of 3'-8'L x 30" wide.

· 14ga/304 Stainless Steel Top.

· With 2” x 10” back splash.

· With marine edge front, left, and right end.

· With (1) integral sink bowls-20"l x 16"w x 12"D fully welded/fabricated.

· Provide support bracket for 1 twist waste drains(Item 18-by KEC).

· Sink bowl to be on right of table where shown.

· Base to be built with 16ga/304 Stainless Steel undershelf with 16ga/304 Stainless Steel legs and with stainless steel bullet feet and gussets.

· Punch (1) set holes in deck as shown, 8" OC to accommodate faucet (Item 48-by KEC). · Provide 16ga/304 stainless steel cantilever splash mounted overshelf , 15"w x 3'-8"L where shown.

· Fully welded construction required, except that welded leg/base undershelf structure and overshelf structure are to be removable from top to facilitate installation at project site. · Provide "Z” clips constructed of (more) - Similar or superior

Storage Shelving (Bakery Supplies),Tabco Model EC-2430 Dimensions: 1(h) x 30(w) x 24(d)Special Value Wire Shelving, 30"W x 24"D, heavy duty, chrome plated finish, NSF4 ea Model ECPC-74 Special Value Wire Shelving Post, 74"H, numbered, heavy duty,chrome plated, for use with casters, NSF1 st Model EC-26 Special Value Wire Shelving Stem Casters, (4) 5" swivel poly, (2) withbrakes, include donut bumpers (for wire shelving only) - similar or superior

Gelato Machine "COUNTERTOP MACHINE (NEMOX GELATO 5K SC. DIM: 465x480x395MM, BRAND: NEMOX, MODEL: GELATO PRO 5K

NEMOX GELATO SK SC:

The Gelato Pro SK SC is the countertop machine for restaurants world-wide. Functional, powerful, fast and convenient, it provides the highest quality in gelato/ice cream and sorbet preparation. Continuous operating capability allows rapid production of several different flavours.

- Preparation time 12-15 minutes

- Dims: 465x480x395 mm Brand: NEMOX, Model: GELATO PRO SK" - Similar or superior

Holding/Proofing Cabinet-Undercounter Metro Model C593X-SFC-U Dimensions: 32.25(h) x 30(w) x 36.38(d) C5™ 9 Series Controlled Humidity Heated Holding & Proofing Cabinet, mobile, undercounter, clear double panel tempered glass door, universal wire slides, capacity (5) 18" x 26" or (10) 12" x 20" x 2-1/2" pans, 3" OC (adjustable on 1-1/2" increments), stainless steel, 3" casters, polymer bumper & drip trough combination, NSF 1 ea Export voltage 220-240V, 7.6-8.3A, 50 hz, 1681-2000W - Similar or superior

Work Table-Overshelf Custom Model WORK TABLE Custom Fabricated Work Table · Dimensions of 5'L x 36" wide.

· 14ga/304 Stainless Steel Flat Top.

· Base to be built with 36"L open pipe base LEFT and 24"L-16ga/304 Stainless Steel undershelf RIGHT with 16ga/304 Stainless Steel legs and with stainless steel bullet feet and gussets.

· Provide cutout and reinforced top structure right for 2 burner range(Item 63 by owner)...Range to be shipped to fabricator for mounting into table by fabricator.

· Provide bracket for range control panel(Item 63 by owner)...Control panel to be shipped to fabricator for mounting into table by fabricator.

· Provide 16ga/304 stainless steel cantilever mounted single overshelf , with 20"w x 24"L portion LEFT then 15"w x 36'L portion RIGHT where shown.

· Fully welded construction required, except that welded leg/base undershelf structure and overshelf structure are to be removable from top to facilitate installation at project site. · Table to be (more) - Similar or superior

Hotplate-2 Burner, Wells Model H-706EU Dimensions: 4.5(h) x 14.75(w) x 23.5(d) Hotplate, built-in, electric, 14-3/4" W, two burners, 9" Ø solid cast iron elements, with (2) infinite heat controls, front mounted, recessed control panel, stainless steel drip tray, Wellslok, 3000/4000w, RU, NSF 1 ea 1 year parts and labor warranty, standard 1 ea Export Voltage: 220-240V, 50hz, 1 ph, 4kw, 16.7A 1 ea One year warranty on cast iron grates, burners & burner shields, standard - Similar or

Convection Oven Vulcan Model VC4EC Dimensions: 54.75(h) x 40(w) x 42.25(d) Convection Oven, electric, single-deck, standard depth, computer controls, 99-hour timer, (5) nickel plated racks, 23-3/4"H legs with foot, stainless steel front, top & sides, stainless steel door with window, 1/2 HP, 12.5kW, NSF, cUL, UL, ENERGY STAR® 1 ea 1 year limited parts & labor warranty, standard 1 ea 220/380v, 50hz, 3-ph, 4 wire, 33 amps 1 ea Simultaneous doors 1 ea Model DRAFT-DIVERT Down draft flue diverter 1 ea Model OPNSTND-LEGS Stainless steel leg stand with stainless steel shelf & adjustable rack supports on 8" stainless steel legs - Similar or superior

Freezer-1 Section True Mfg. - General Foodservice Model TGN-1F-1S Dimensions: 78.38(h) x 27(w) x 29.5(d) Freezer, reach-in, one-section, (1) solid door, (3) PVC coated adjustable wire shelves, interior lighting, stainless steel door, stainless steel front, aluminum sides, clear coated aluminum interior with stainless steel floor, 64mm castors, R290 Hydrocarbon refrigerant, 230v/50/1-ph, .65 amps, CE, Made in USA, ENERGY STAR® 1 ea Self-contained refrigeration standard 1 ea Door hinged right standard - Similar or superior

Utility Cart-SSLakeside Manufacturing Model 422 Dimensions: 32(h) x 31(w) x 19(d)Utility Cart, 3-tier, open base, 500 lbs capacity, 18" x 27" shelf size, 11-1/2" shelf clearance,sound deadening panels, (1) push handle with bumpers, (2) bumpers on front legs, galvanizedsteel dolly frame, stainless steel construction, 4" swivel casters, Made in USA2 ea Casters, 4" swivel, standard - Similar or superior

Storage Shelving (Dry Storage) Advance Tabco Model EC-2448 Dimensions: 1(h) x 48(w) x 24(d) Special Value Wire Shelving, 48"W x 24"D, heavy duty, chrome plated finish, NSF 15 ea Model EC-2460 Special Value Wire Shelving, 60"W x 24"D, heavy duty, chrome plated finish, NSF 12 ea Model ECP-74 Special Value Wire Shelving Post, 74"H, numbered, heavy duty, chrome plated, adjustable feet, NSF 20 pk Model EC-30 Special Value Wire Shelving S Hooks, for add-shelving (package of 2) - Similar or superior

Floor Trough Advance Tabco Model FTG-1230 Dimensions: 4(h) x 30(w) x 12(d) Floor Trough, 30"W x 12"D x 4" deep, 14 gauge 304 stainless steel, includes stainless steel subway grating constructed from 3/16" x 1" bars, removable stainless steel strainer basket, 4" O.D. waste pipe 3"L, pitched towards waste, NSF - Similar or superior

Ice Machine (Head, Bin) Manitowoc Model IDT0750A Dimensions: 21.5(h) x 30(w) x 24(d) Indigo NXT™ Series Ice Maker, cube-style, air-cooled, self-contained condenser, 30"W x 24"D x 21-1/2"H, production capacity up to 680 lb./24 hours at 70°/50° (540 lb. AHRI certified at 90°/70°), easyTouch display with 13 different language options, date/time stamp display, automatic reminder/alert icon, one touch asset information, automatic detection of accessories, continuous operating status, programmable production options (time, weight, day or night), one touch cleaning with displayed instructions, Alpha-San anti-microbial protection, acoustical ice sensing probe, self-diagnostic technology, DuraTech™ exterior, dice size cubes, R410A refrigerant, NSF, cULus, CE, ENERGY STAR® 1 ea Model WARRANTY-ICE-SC 3 year parts & labor (Machine), 5 year parts & labor (Evaporator), 5 year parts & 3 years labor (Compressor), standard 1 ea (-251) 230v/50/1-ph, CE 1 ea Note: An additional charge is (more) - Similar or superior

Water Filter (Ice) Everpure Model EV929321 Dimensions: 25.11(h) x 14.25(w) x 6.13(d) Cold/Insurice Manifold, single, 20" prefilter head, for fountain, ice, coffee and tea machines, built-in water pressure gauge, includes mounting box bracket & screws, EC110 or EC210 prefilter cartridge 1 ea Model EV969231 Everpure® 4FC-S Replacement Cartridge, 15,000 gallon capacity, 2.5 gpm flow rate, 0.5 micron rating, scale inhibitor, reduces cysts, chlorine taste & odor, NSF - Similar or superior

Service/Mop Faucet Krowne Model 16-127-W Krowne Royal Series Service Faucet, splash-mounted, 8" centers, 6-1/2" long heavy cast spout with bail hook & hose thread, wrist blade handles, bracket can mount above or below, vacuum breaker, rough chrome finish, low lead compliant, NSF, Includes internal check valves to prevent backflow & cross contamination & spout support wall bracket 1 ea 3 year warranty, standard - Similar or superior

Mop Sink Advance Tabco Model 4-OP-18 Dimensions: 35(h) x 24(w) x 24.5(d) Service Sink, 1-compartment, 24"W x 24-1/2"D x 35"H O.A. 24"W x 21"D front-to-back x 8" deep sink bowl, fabricated sink bowl, 8"H backsplash, 18/304 stainless steel construction, 8" O.C.

faucet holes, includes: 3-1/2" basket drain, 18/430 stainless steel legs with stainless steel adjustable bullet feet - Similar or superior

Utility Shelf-Mop Storage

Advance Tabco Model K-245-X Dimensions: 7.5(h) x 24(w) x 8(d) Special Value Utility Shelf, wall-mounted, 24"W x 8"D, 1-1/2" upturn on rear & sides, (2) mop holders, (3) rag hooks, stainless steel, NSF - Similar or superior

Storage Shelving (Chemical/Janitorial) Advance Tabco Model EG-2436 Dimensions: 1(h) x 36(w) x 24(d) Special Value Wire Shelving, 36"W x 24"D, heavy duty, green epoxy coated, NSF 4 ea Model EGPC-74 Special Value Wire Shelving Post, 74"H, numbered, heavy duty, green epoxy coated, for use with casters, NSF 1 st Model EC-26 Special Value Wire Shelving Stem Casters, (4) 5" swivel poly, (2) with brakes, include donut bumpers (for wire shelving only) - Similar or superior

Hood System-Exhaust Only (BBQ/Pizza)Captive-Aire Model HOOD 75Hood System - BBQ12'-6"L x 5'-0" x 2'-0"H Type II Stainless Steel Hood Canopy (Exhaust Only) - Similar or superiorUtility CabinetExhaust FanExhaust RiserSS Grease FiltersLED LightsField WrapperElectrical PackageFace Mount SwitchS/S BacksplashExport Crating - Similar or superior

BBQ Grill/Smoker Custom Model 2496TRIPLEDOORLIMO BBQ

GRILL/SMOKER GATOR PIT OF TEXAS

To include:

foot brakes adjustable tuning plates brass ball valve - Similar or superior

Pizza Oven "ELECTRIC PIZZA OVEN OEM, MADE IN ITALY, MODEL:DOMITOR-DB8.30 M. CAPACITY: DOUBLE CHAMBER (4x2=8 PIZZA AT A TIME)

ELECTRIC PIZZA OVEN

OEM MADE IN ITALYMODEL: DOMITOR - DB8.30 M CAPACITY: DOUBLE CHAMBER (4 X 2 = 8

PIZZA AT A TIME)INSIDE DIM : 630 X 630 X 150 MM OUTSIDE DIM :950 X 950 X 730 MM PIZZA

SIZE : 300 MM DIA

MADE OF STAINLESS STEEL TEMPERATURE ADJUSTMENT THROUGH ELECTROMECHANICAL

THERMOSTATS,INDEPENDENT FOR CEILING AND BEDPLATE.BAKING CHAMBER IN ALUMINATED

PLATE. TEMPERATURE DISPLAY THROUGH ANALOGICAL PYROMETERSAFETY THERMOSTAT

WITH MANUAL RESETTING. WITHOUT STAND

230-400 V / 50-60 HZ/ 3-PH/ 7.1 KW" - Similar or superior

Storage Shelving (Pizza)

Advance Tabco Model EG-2424 Dimensions: 1(h) x 24(w) x 24(d) Special Value Wire Shelving, 24"W x 24"D, heavy duty, green epoxy coated, NSF 4 ea Model EGPC-74 Special Value Wire Shelving Post, 74"H, numbered, heavy duty, green epoxy coated, for use with casters, NSF 1 st Model EC-26 Special Value Wire Shelving Stem Casters, (4) 5" swivel poly, (2) with brakes, include donut bumpers (for wire shelving only) - similar or superior

1 EA

79 Refrigerator/Freezer (Residential) 230-V/50Hz/1-ph - Dimensions: W 690 X 635D X 2020mm High

1 EA

80 Freezer-Upright (Residential), 230-V/50Hz/1-ph - Dimensions: W 690 X 635D X 2020mm High 1 EA

81 Pizza Prep-Refrigerated, 230-V/50Hz/1-ph - Dimension: 1800mm X 700mm X 1050 mm high 1 EA

Worktop-Refrigerated, Overshelf True Mfg. - General Foodservice Model TUC-44-HC~SPEC3 Dimensions: 29.75(h) x 44.5(w) x 32.25(d) SPEC SERIES® Deep Undercounter Refrigerator, 33 - 38°F, side mounted self-contained refrigeration, SPEC Package 3 includes: 16-ga. stainless steel top, (1) heavy-duty stainless steel door, steel handle, door lock standard, (2) PVC coated adjustable wire shelves, electronic temperature control with digital temperature display, stainless steel sides & back, stainless steel interior, 5" castors, R290 Hydrocarbon refrigerant, 1/10 HP, 230v/50/1-ph, .8 amps, Made in

USA

1 ea Self-contained refrigeration standard 1 ea Model 915048 Single Overshelf, 44-5/8"W x 16"D x 20-1/32"H, for TPP/TUC/TWT-44, stainless steel 1 ea 5" Castors, standard - Similar or superior

Air Curtain-36" Mars Air Systems Model LPN236-1UU-OB LoPro Series 2 Air Curtain, for 36" wide door, unheated, galvanized steel cabinet, obsidian black powder coat finish, (1) 1/6 HP motor, 220v/50/1-ph, ETL 4 ea 5 year warranty, standard 4 ea Mechanical switches 4 ea Model 99-014 Door Limit Switch, indoor, plunger/roller type, remote mounted, 1 HP max, 250v, 20.0 amps, NEMA 2 - Similar or superior

4 EA

Air Curtain-25"Mars Air Systems Model LPN225-1UU-OBLoPro Series 2 Air Curtain, for 25" wide door, unheated, galvanized steel cabinet, obsidian blackpowder coat finish, (1) 1/6 HP motor, 220v/50/1-ph, ETL1 ea 5 year warranty, standard1 ea 1 year warranty for all parts (except filters), standard1 ea Magnetic switches1 ea Model MCPS-1UU Motor Control Panel, for unheated units, remote mounted, (1)1/6 HP motor maximum, 220v/50/1-ph1 ea Model 99-018 Magnetic Reed Switch, commercial plastic, surface mounted, 24v,NEMA 11 ea Model MCP-24V Transformer, panel mounted, 24v controller - Similar or superior

Hand Sink-Drop-In Advance Tabco Model DI-1-10-1X Dimensions: 10(h) x 13(w) x 19(d) Drop-In Sink, 1-compartment, 10" wide x 14" front-to-back x 10" deep bowl, 20 gauge 304 stainless steel, with deck mounted gooseneck faucet, basket drain, NSF 1 ea Model K-52OMIT To Delete Faucet - Similar or superior

Pastry Case-Dual Temp (Cold & Dry)

True Mfg. – Specialty Retail Display Model TDM-DZ-59-GE/GE-S-S Dimensions: 49.13(h) x 59.25(w) x 39(d) Display Merchandiser, dual zone (dry/refrigerated), 59-1/4"W, self-contained refrigeration, with lift up curved glass front, glass sides, (2) rear sliding glass doors, (3) tiered levels of adjustable chrome plated wire shelves (6 shelves total), LED interior lighting, stainless-steel exterior, stainless-steel interior, R290 Hydrocarbon refrigerant, 1/4 HP, 230-V/50Hz/1-ph, 10.0 amps, NEMA 5-15P, CE, cULus, UL EPH Classified, Made in USA 1 ea Self-contained refrigeration standard - Similar or superior

Air Curtain-72" Mars Air Systems Model LPN272-1UU-OB LoPro Series 2 Air Curtain, for 72" wide door, unheated, galvanized steel cabinet, obsidian black powder coat finish, (1) 1/6 HP motor, 220v/50/1-ph, ETL 1 ea 5 year warranty, standard 1 ea Mechanical switches 2 ea Model 99-014 Door Limit Switch, indoor, plunger/roller type, remote mounted, 1 HP max, 250v, 20.0 amps, NEMA 2 - Similar or superior

BLAST CHILLER/FREEZER EVERLASTING - PRO EXTRA

"GN 1/1 / EN 60x40; Gas: R452A; Chilling +90°C / +3°C: 20 kg; Freezing +90°C / -18°C: 14 kg;

Dimensions: L 780 x P 803 x H 967 mm; GN 1/1 tray or baking pan capacity 5 (pitch 70 mm.) 6 (pitch 52,5 mm.) 9 (pitch 35 mm.)", 220-240Volts/50Hz - similar or superior

TURBOCHEF DOUBLE BATCH AIR IMPINGEMENT OVEN (HIGH SPEED), 220-240Volts/50Hz Oven Height 23.2 in | 589 mm X Oven Width 27.7 in | 704 mm X Oven Depth 31.7 in | 805 mm.

https://turbochef.com/product/double-batch/ - similar or superior

Upright refrigerator, stainless steel door and body, lockable with digital temperature controller, capacity: 455lt., 220-240Volts/50Hz. Dimensions W690x635Dx2020mm High

Upright Freezer Stainless Steel Single Door 455lt Upright Freezer, stainless steel door and body, lockable with digital temperature controller, capacity: 455lt, 220-240Volts/50Hz. Dimensions W690x635Dx2020mm High

Structure in AISI 304 stainless steel 18/10 Manual tilting. Rounded corners and shaped front spout to facilitate unloading and cleaning operations. Balanced stainless steel lid and strong stainless steel AISI 304 hinges. Water filling tap located on the front of the unit. Armoured heating elements in stainless steel on the external bottom of the tank; thermostatic control (75-300 °C).

Dimensions 800x700x850 mm; Weight 115 kg; 9kW 400V

Mobile Food Warming/Holding Cabinet Power: 2.63kW POWER RATING 230V-50Hz DIMENSION: 691 x 874 x 1797mm; CAPACITY 22 Trays; WEIGHT 222kg