230131 ESS S Sudan Kitchen Reno IFC R3 FS Cut Sheet Package.pdf

5824 Argonne Blvd. ● New Orleans, LA 70124 USA● 504-329-9024 ● cam@cmcdesignllc.com

USAID – US Embassy – South Sudan

Perez, APC

Kitchen Equipment

Cut Sheets

1/23/2023

ITEM 1

Item : 2

Project: USAID - US Embassy - South Sudan

Qty/Description:

1ea Walk-In Cooler/Freezer (size and shape per drawings)

American Panel Two Compartment Walk-In, model #195383

Overall exterior dimensions to be 16'-4.5" X 15'-5" X 8'-6" high. Freezer interior dimensions to be 15'-8.5" X 7'-2.5" X 7'-10.25" high with 4" Insulated Floor. Interior floor finish to be .100 Smooth

Aluminum. Cooler interior dimensions to be 15'-8.5" X 7'-2.5" X 7'-10.25" high with 4" Insulated Floor.

Interior floor finish to be .100 Smooth Aluminum. Interior wall finish to be 26 ga. white stucco galv. steel, interior ceiling to be 26 ga. white stucco galv. steel, exposed exterior to be 20 ga. stainless steel, #3 finish, unexposed exterior to be 26 ga. stucco acrylume.

(2) 48" X 77" flush mount magnetic infitting door with cam-rise hinges, padlockable deadbolt handle (exterior doors only), door closer, brushed hardware, fully programmable Intelligent Controller (IC) featuring audio/visual temperature alarm with digital thermometer, high & low set points, energy saving door frame heater wire, vapor proof light & switch with pilot light.

Accessories to include:

(18) Roof Support Angle at Partition Wall (w/ Beauty Trim & Fiberglass Allthread)

(1) Floor Ramp, Interior (24" deep) for up to 42" door

(1) Flex. Strip Curtain, up to 36" x 77" Opening

(2) Extra Hinge

(4) LED Light Fixture, Cooler & Freezer, 48" 2-lamp (-40°F or higher operating temp.)

(1) 220/50/1 Electrical for Cooler Door Panel (Door Heater)

(1) 220/50/1 Electrical for Freezer Door Panel (for Door Heater & P.R.V.)

(4) 1/8" alum treadplate on 57.5" Door/Frame (36" high)

(235) Wall Protection (wainscot), 1/8" alum. treadplate

(66) Closure Panel, 20 ga. Stainless Steel

(2) Trim Strips, 3" x 3", 20 ga. Stainless Steel

Refrigeration to include:

See Item 3-4 and sheet FS21 for details

Item 2a

1 ea Walk-In INSTALLATION

By KEC: Includes complete assembly of box and all components (unless noted otherwise), leveling, complete installation of refrigeration systems, installation of condensate drain lines, and startup & test.

By Others: Electrical connections including hanging of all light fixtures, provision of power to condensers & coils, and all final connections(Division 26) Flooring(tile or otherwise)(Division 04 or 09) Crane lifts to roof if required(GC)

Item: 3&4

Project: USAID – US Embassy – South Sudan

1 lot Medium Temp refrigeration (+35F)

1 lot Low Temp Refrigeration (‐10F)

Refrigeration is combined into 1 rack system.

Refer to Plan Sheet FS21 for Details

Item #: Qty #:

Model #:

Project #:

www.advancetabco.com

Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.

For Orders & Customer Service:

Email: customer@advancetabco.com or Fax: 631-242-6900

For Smart Fabrication™ Quotes:

Email: smartfab@advancetabco.com or Fax: 631-586-2933

Item #: Qty #:

Model #:

Project #:

GREEN EPOXY POSTS

EGP-14

EGP-34

EGP-54

EGP-64

EGP-74

EGP-86

14”

34”

54”

64”

74”

86”

4 lbs.

8 lbs.

12 lbs.

15 lbs.

17 lbs.

20 lbs.

Post Boxed MODEL # Height Weight

GREEN EPOXY POSTS FOR CASTERS

EGPC-14

EGPC-34

EGPC-54

EGPC-64

EGPC-74

EGPC-86

14” 34” 54” 64” 74” 86”

4 lbs.

8 lbs.

12 lbs.

15 lbs.

17 lbs.

20 lbs.

20” 40” 60” 70” 80” 92”

Post Post Height Boxed MODEL # Height with Casters Weight

Posts are packed 4 to a box.

EG-1424

EG-1430

EG-1436

EG-1442

EG-1448

EG-1460

EG-1472

EG-1824

EG-1830

EG-1836

EG-1842

EG-1848

EG-1854

EG-1860

EG-1872

EG-2124

EG-2130

EG-2136

EG-2142

EG-2148

EG-2154

EG-2160

EG-2172

EG-2424

EG-2430

EG-2436

EG-2442

EG-2448

EG-2454

EG-2460

EG-2472

14” x 24” 14” x 30” 14” x 36” 14” x 42” 14” x 48” 14” x 60” 14” x 72”

18” x 24” 18” x 30” 18” x 36” 18” x 42” 18” x 48” 18” x 54” 18” x 60” 18” x 72”

21” x 24” 21” x 30” 21” x 36” 21” x 42” 21” x 48” 21” x 54” 21” x 60” 21” x 72”

24” x 24” 24” x 30” 24” x 36” 24” x 42” 24” x 48” 24” x 54” 24” x 60” 24” x 72”

35 lbs.

41 lbs.

47 lbs.

52 lbs.

58 lbs.

38 lbs.

45 lbs.

39 lbs.

45 lbs.

51 lbs.

56 lbs.

64 lbs.

35 lbs.

41 lbs.

49 lbs.

41 lbs.

48 lbs.

55 lbs.

63 lbs.

70 lbs.

41 lbs.

45 lbs.

48 lbs.

44 lbs.

51 lbs.

58 lbs.

64 lbs.

72 lbs.

41 lbs.

47 lbs.

55 lbs.

WIRE SHELVING

Shelf Boxed MODEL # Size Weight

24” to 48” length shelves are packed 4 to a box and *54”, 60” and 72” shelves are packed 2 to a box.

GREEN EPOXY COATED

WIRE SHELVING

REF-S

FEATURES:

Each shelf holds up to 800 lbs. evenly distributed weight.

NSF approved for dry storage and wet environments only.

Posts are numbered for easy assembly

CONSTRUCTION:

Unit assembles using tapered split sleeves.

For mobile units, 5” swivel Rubber or Poly casters includes set of 4 casters, (2 with brakes) and 4 donut bumpers.

set of 4 casters, (2 with brakes) and 4 donut bumpers.

MATERIAL:

Zinc plated wire with green epoxy coating. 5” Rubber Swivel Stem Caster EC-25

5” Poly Swivel Stem Caster EC-26

OPTIONAL ACCESSORIES MODEL # Qty with Optional Casters

GREEN EPOXY POSTS

WITH ADJUSTABLE FOOT

Numbered Posts

Rubber Caster

Poly Caster

ITEM 5

EC-30 S HOOKS

SECTION A-A (14”, 18" & 21" Wide)

Serpentine Wire Truss Serpentine Wire Truss

SECTION A-A (24" Wide)

5.71mmØ

Serpentine Wire Truss (All Four Sides)

Tapered Gusset (All 4 Corners)

A

A

Length

Width

TOL ± .500” ALL DIMENSIONS ARE TYPICAL

DETAILS and SPECIFICATIONS

REF-S

ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice.

© ADVANCE TABCO, SEPTEMBER 2018200 Heartland Boulevard, Edgewood, NY 11717-8380

Item : 6

6 ea Pan Rack

Existing

KEC/Owner to relocate to new location per plans

ITEM 7

LPV2 (LoPro2 Variable Speed) Series Unheated Model Lengths 25” – 144”

14716 S. BROADWAY, GARDENA, CA 90248 ● Ph: (310)532-1555 Fax: (310)532-3030 ● www.marsair.com © Copyright Mars Air Systems, LLC 2014

NOTE: MARS AIR SYSTEMS, LLC reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions, or replacements for previously purchased equipment.

MARS AIR SYSTEMS, LLC ● GARDENA, CA ● USA VM, 10/01/20

LPV2

Series: Lo Pro 2

72 1 U D OB

LENGTH OF UNIT

# OF MOTORS

U = UNHEATED

VOLTAGE CODE

COLOR

EXAMPLE

115v/1Ø (A)

208/230v/1Ø (D)

LPV225-1U*-OB 2.4 1.2

LPV236-1U*-OB 2.4 1.2

LPV242-1U*-OB 2.4 1.2

LPV248-1U*-OB 2.4 1.2

LPV260-1U*-OB 2.6 1.4

LPV272-1U*-OB 2.6 1.4

LPV284-2U*-OB 4.8 2.4

LPV296-2U*-OB 4.8 2.4

LPV2108-2U*-OB 5.0 2.6

LPV2120-2U*-OB 5.2 2.8

LPV2144-2U*-OB 5.2 2.8

Alternate voltage codes with FLA (Full Load Amp) data:

220v/1Ø/50Hz (U) - 0.9A per motor For total FLA, multiply motor FLA by # of motors.

Ampacity (MCA) = total FLA X 1.25

Electrical Data

(FLA)

* - Use corresponding letters in"Electrical Data" columns to complete the model numbers.

Unit Voltage (Voltage Code)

Unheated Data Sheet Applications: Environmental Separation (up to 8’) and Insect Control (up to 7’)

Features:

1/6 HP continuous duty motors Sleek self-contained one-piece light gauge corrosion-resistant paint lock metal design ETL-certified to conform to UL 507 (US) and CSA 22.2 (Canada) standards (Indoor/Outdoor Use) Dynamically balanced corrosion-resistant aluminum crossflow wheels Very low-profile design, 8” (H) x 8 7/8” (D) Variable speed controller Wall mounting bracket removable for easy installation 1/4" mounting holes provided for wall mounting (4) and overhead mounting (4), 2 on each end Cabinet has sufficient strength for fastening to wall on both ends without intermediate support up to 72”. (Models

84” to 144” require intermediate support in the center.)

Adjustable air directional vane with 40° sweep front to back Standard color is Obsidian Black Rust preventative electrostatic polyurethane powder coating 5-year parts warranty Freight included (FOB continental USA) Proudly Made in the USA

Mars Recommended Accessories (See Submittals for additional details):

Door Limit Switches o 99-014, Combination mechanical switch, 250v, 1HP Max Controllers o J0021, Commercial low voltage controller, 115V, 1Ø, adjustable time delay, with commercial plastic surface mounted door limit switch (field installed) o J0022, Commercial low voltage controller, 208-277V, 1Ø, adjustable time delay, with commercial plastic surface mounted door limit switch (field installed)

Brackets o B0042, Transom mounting bracket set for LPV2

Filters o J05**, ¼” aluminum pressed frame bank filters (** = Model Length)

Clean Air Sections o UVCL**-*-OB, UV Section (** = Model Length, * = Voltage Code)

Severe Duty and Finish o HSG-304SS-LP, 304 Stainless steel housing construction

Sound Levels: (measured at 10’ in an open field) (25” & 36”) - 49 dBA, (42”) - 50 dBA, (48”) - 52 dBA, (60”-96”) - 53 dBA & (108”-144”) - 54

LPV2

(Low Profile Variable 2)

Series 2

Model Number Nozzle Length (in)

Length (in)

Depth (in)

Height (in)

Motor (hp)

Weight (lbs)

Max Velocity (fpm)

Max Volume

(cfm)

LPV225-1U*-OB 25 25 9 8 1/6 20 1800 625

LPV236-1U*-OB 36 36 9 8 1/6 32 1800 900

LPV242-1U*-OB 42 42 9 8 1/6 35 1800 1050

LPV248-1U*-OB 48 48 9 8 1/6 40 1800 1200

LPV260-1U*-OB 60 60 9 8 1/6 48 1800 1500

LPV272-1U*-OB 72 72 9 8 1/6 58 1800 1800

LPV284-2U*-OB 86 86 9 8 Two 1/6 75 1800 2100 LPV296-2U*-OB 98 98 9 8 Two 1/6 83 1800 2400

LPV2108-2U*-OB 110 110 9 8 Two 1/6 92 1800 2700 LPV2120-2U*-OB 122 122 9 8 Two 1/6 102 1800 3000 LPV2144-2U*-OB 146 146 9 8 Two 1/6 122 1800 3600

Lab DataMechanical Data

* - Use corresponding letters in "Electrical Data" columns to complete the model numbers

Note: Data above is for 60 Hz, 17% reduction in the performance data with 50 Hz.

��� ��������������� �������� � ��!�!���!""�� #���� ��� $�� %� $&� '�� ()* � �+"�,� -�#� "� ���&��$��#"� "!�$ "��� �$ #�����, #��.�+� ��� !/� ���" !���"!�� �� ��� !�� 0���� �!��� �$ 1�� " �,� ��"� +"� 2� $& �$ �� �� � .$ ��� +!����� 3445 ���� 1�� " �,� 6 $& 7��" �, "!�� ��"" �! $ �� 1��� �������� ��� " ���� 2� $&8����9� '�$$�� ��� �"��� ����" +"��1!�8

:;<=>:=?>=:;@;ABCD:;E @@@D>=:;@;ABCD:;E���� FGH� I JJHGJKL

ITEM 8

(Existing item - Verify data in field)

���/0012�03����45�6�" ��/"�7�8��9.��� 6�����"���-/"����:;��:9<�=���4�� ">���?��@".���6?��"A���"B"4A4C�D"8�? E����"B"�@�"��

FGHIFJK"IL

M "NOPPQRSSPTUTUPKVWVXUSY ITEM 9

(Existing item - Verify in Field)

Project #:

EC-1424

EC-1430

EC-1436

EC-1442

EC-1448

EC-1460

EC-1472

EC-1824

EC-1830

EC-1836

EC-1842

EC-1848

EC-1854

EC-1860

EC-1872

EC-2124

EC-2130

EC-2136

EC-2142

EC-2148

EC-2154

EC-2160

EC-2172

EC-2424

EC-2430

EC-2436

EC-2442

EC-2448

EC-2454

EC-2460

EC-2472

MODEL # Shelf Size Boxed Weight

14” x 24” 14” x 30” 14” x 36” 14” x 42” 14” x 48” 14” x 60” 14” x 72”

18” x 24” 18” x 30” 18” x 36” 18” x 42” 18” x 48” 18” x 54” 18” x 60” 18” x 72”

21” x 24” 21” x 30” 21” x 36” 21” x 42” 21” x 48” 21” x 54” 21” x 60” 21” x 72”

24” x 24” 24” x 30” 24” x 36” 24” x 42” 24” x 48” 24” x 54” 24” x 60” 24” x 72”

35 lbs.

41 lbs.

47 lbs.

52 lbs.

58 lbs.

38 lbs.

45 lbs.

39 lbs.

45 lbs.

51 lbs.

56 lbs.

64 lbs.

35 lbs.

41 lbs.

49 lbs.

41 lbs.

48 lbs.

55 lbs.

63 lbs.

70 lbs.

41 lbs.

45 lbs.

48 lbs.

44 lbs.

51 lbs.

58 lbs.

64 lbs.

72 lbs.

41 lbs.

47 lbs.

55 lbs.

WIRE SHELVING

24” to 48” length shelves are packed 4 to a box and *54”, 60” and 72” shelves are packed 2 to a box.

CHROME

WIRE SHELVING

S-1

FEATURES:

Each shelf holds up to 800 lbs. evenly distributed weight.

NSF approved for dry storage and heated environments only.

Posts are numbered for easy assembly

CONSTRUCTION:

Unit assembles using tapered split sleeves.

For mobile units, 5” swivel Rubber or Poly casters includes set of 4 casters, (2 with brakes) and 4 donut bumpers.

MATERIAL:

Chrome plated.

NEW YORK GEORGIA TEXAS NEVADA

Fax: (631) 242-6900 Fax: (770) 775-5625 Fax: (972) 932-4795 Fax: (775) 972-1578www.advancetabco.com

Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.

Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933 Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.

Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933

CHROME POSTS

WITH ADJUSTABLE FOOT

Numbered Posts

5” Rubber Swivel Stem Caster EC-25 5” Poly Swivel Stem Caster EC-26

OPTIONAL ACCESSORIES MODEL # Qty

Rubber Caster

Poly Caster with Optional Casters

MODEL # Post Height Boxed Weight

CHROME POSTS

ECP-14

ECP-34

ECP-54

ECP-64

ECP-74

ECP-86

14” 34” 54” 64” 74” 86”

4 lbs.

8 lbs.

12 lbs.

15 lbs.

17 lbs.

20 lbs.

MODEL # Post Post Height Boxed Height with Casters Weight

CHROME POSTS FOR CASTERS

ECPC-14

ECPC-34

ECPC-54

ECPC-64

ECPC-74

ECPC-86

14” 34” 54” 64” 74” 86”

4 lbs.

8 lbs.

12 lbs.

15 lbs.

17 lbs.

20 lbs.

20” 40” 60” 70” 80” 92”

Posts are packed 4 to a box.

ITEM 10

EC-30 S HOOK

SECTION A-A (24" Wide)

5.71mmØ

Serpentine Wire Truss (All Four Sides)

Tapered Gusset (All 4 Corners)

A

A

Length

Width

TOL ± .500” ALL DIMENSIONS ARE TYPICAL

DETAILS and SPECIFICATIONS

S-1a

ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to

© ADVANCE TABCO, MAY 2014200 Heartland Boulevard, Edgewood, NY 11717-8380

Item No.

Specifier Identification No.

Model No.

Quantity

© 2002 Cambro Manufactur ing Company 5801 Skylab Road, Huntington Beach, California 92647-2056-U.S.A.

T e l e p h o n e (1)714 848 1555 Toll Free 800 854 7631 Customer Service Hot Line 800 833 3003

LIT FCST-0102-17

F e a t u res & Benefit s

• Conveniently and safely store heavy bulk foods, liquids, dairy products, dry goods, paper products, or clean equipment 12" (30 cm) off the floor.

• Storage height is double the required 6" (15 cm) enforced by most regional food safety and/or HACCP programs.

• Use in receiving dock area to keep clean food storage boxes safely off the ground while transferring bulk produce and other food products out of cartons and into storage boxes.

• New Speckled Gray (480) color matches perfectly with C a m s h e l v i n g™ for a clean, consistent look from the freezer to the cooler to dry storage area.

• Load capacity:

Models DRS30, DRS36, DRS300, DRS360 - 1500 lbs. (680 kg.)

Models DRS48, DRS60, DRS480, DRS600 - 3000 lbs. (1,360 kg.)

• One piece, seamless, heavy-duty polypropylene ensures long lasting durability and superior equipment performance. Single wall structure provides added strength and stability.

• Smooth surface is easy to clean and will not rust, chip, dent or corrode. Open ends and sides provide easy access for cleaning floor areas underneath.

• Available with solid ribbed tops or slotted tops.

• Slotted tops recommended for use in coolers and freezers to ensure extra cold air circulation around perishable products for optimum freshness and quality.

• One Camlink® connector is included to securely lock racks together for a more stable storage system.

• No assembly required.

• Available in 2 colors.

Solid Top Models DRS30, DRS36, DRS48, DRS60

Slotted Top Models DRS300, DRS360, DRS480, DRS600

S-Series Dunnage Racks

S-Series Solid Top Dunnage Racks

Approvals

S-Series Slotted Top Dunnage Racks

Camlink®

Securely connects S-Series Dunnage Racks together.

DRS48

DRS480

DRS300

DRS30

ITEM 11

© 2002 Cambro Manufacturing Company 5801 Skylab Road, Huntington Beach, California 92647-2056-U.S.A.

T e l e p h o n e (1)714 848 1555 Toll Free 800 854 7631 Customer Service Hot Line 800 833 3003

Printed in USA

Item No.

Specifier Identification No.

Model No.

Quantity

Specifications Dimension Tolerance: +/- 1/4" (0,64 cm)

Solid Top Models DRS30, DRS36, DRS48, DRS60

Slotted Top Models DRS300, DRS360, DRS480, DRS600

S-Series Dunnage Racks

Optional Accessories Standard Colors ❏ Dark Brown (131) ❏ Speckled Gray (480)Camlink® Connector ❏ DRLNK Black (110)

(1 included with each S-Series Dunnage Rack)

Approvals

Architect Specs The S-Series Dunnage Racks shall be Cambro Models..., manufactured by Cambro Mfg. Co., Huntington Beach, CA 92648 U.S.A. Each unit shall be constructed of one-piece, seamless, heavy-duty molded polypropylene and shall be available with solid ribbed tops or slotted tops. Unit load capacity shall range from 1500 - 3000 lbs. (680 -1,360 Kg.). The top of each unit shall be 12” (30 cm) from the floor. Units will not rust or corrode. Each unit shall come with one Camlink® connector to securely lock racks together. It shall require no assembly and shall be available in 2 colors.

Load Dimensions Case lbs./cube Code Capacity L x W x H Kg/m3

Solid Top DRS30 1500 lbs. 30" x 21" x 12" 19 (4.78)

(680 Kg.) (76 x 53 x 31 cm) 9 (0,13) DRS36 1500 lbs. 36" x 21" x 12" 21 (5.72)

(680 Kg.) (91 x 53 x 31 cm) 9,5 (0,16) DRS48 3000 lbs. 48" x 21" x 12" 28 (7.77)

(1,360 Kg.) (122 x 53 x 31 cm) 13 (0,22) DRS60 3000 lbs. 60" x 21" x 12" 35 (9.72)

(1,360 Kg.) (152 x 53 x 31 cm) 16 (0,27)

Load Dimensions Case lbs./cube Code Capacity L x W x H Kg/m3

Slotted Top DRS300 1500 lbs. 30" x 21" x 12" 19 (4.78)

(680 Kg.) (76 x 53 x 31 cm) 9 (0,13) DRS360 1500 lbs. 36" x 21" x 12" 20 (5.72)

(680 Kg.) (91 x 53 x 31 cm) 9 (0,16) DRS480 3000 lbs. 48" x 21" x 12" 26.5 (7.77)

(1,360 Kg.) (122 x 53 x 31 cm) 12 (0,22) DRS600 3000 lbs. 60" x 21" x 12" 34 (9.72)

(1,360 Kg.) (152 x 53 x 31 cm) 15,5 (0,27)

DRS30/DRS300 DRS36/DRS360 Width

DRS48/DRS480 DRS60/DRS600

Due to our commitment to continued product improvement, specifications are subject to change without notice. Rev. 6/2019 • No. 2.5

Krowne Metal Corporation • 100 Haul Rd. Wayne, NJ 07470 • Toll Free: (800) 631-0442 • Fax: (973) 872-1129 • sales@krowne.com • krowne.com

Model:

Project:

Item #:

Qty:

Date:

Approved By:

Hand Sinks w/ Pedal Valves Hand Sinks

HS-15 HS-16 HS-41

16”W Knee Valve 16”W Knee Valve with Wall Mount Soap

& Towel Dispenser

16”W Knee Valve w/ Side Splashes

OPTIONAL ACCESSORIES

23-157 Overflow Assembly H-100 Chrome Plated 1-1/2” IPS P-Trap H-101 Deck Mount Soap Dispenser H-105 Wall Mount Towel Dispenser H-110 Side Support Brackets H-111 16”W Soap & Towel Dispenser H-115 12”W Soap & Towel Dispenser H-116 Wall Mount Soap Dispenser FG-L2 15”D Factory Installed Left Side Splash FG-R2 15”D Factory Installed Right Side Splash FG-LR2 15”D Factory Installed Left & Right Side Splashes SG-L2 15”D Field Installed Left Side Splash SG-R2 15”D Field Installed Right Side Splash SG-LR2 15”D Field Installed Left & Right Side Splashes

HS-14

HS-39 HS-42

HS-40

16”W Foot Valve

Pedestal Sink

16”W Foot Valve Pedestal Sink with Deck Mount Soap Dispenser & Towel Dispenser

16”W Foot Valve Pedestal Sink with Side Splashes and Wall Mount Soap & Towel Dispenser

16”W Foot Valve Pedestal Sink w/ Side Splashes

Warning: This product can expose you to chemicals including lead and lead compounds which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

SPECIFICATIONS

Fabrication 20 gauge stainless steel

Bowl 9-3/4”W x 12-1/2”L x 6” Deep drawn bowl with stamped rim to prevent spillage

Wall Mount Bracket

Offset design for added strength

Faucet Single Hole Wall Mount Faucet (16-140L)

Drain 1-1/2” Stainless steel drain

Plumbing 1/2” IPS hot and cold water. 1-1/2” IPS drain outlet.

Install at 36” working height. 1/2” faucet supply 12” from floor. 1-1/2” drain line 23-1/4” from floor.

Lead Free

Faucet included is certified to NSF/ANSI 61 and 372 and conforms with the lead content requirements for lead free plumbing as defined by the U.S. Safe Drinking Water Act. Hand sink is certified NSF-2.

ITEM 12

Due to our commitment to continued product improvement, specifications are subject to change without notice. Rev. 6/2019 • No. 2.5

Krowne Metal Corporation • 100 Haul Rd. Wayne, NJ 07470 • Toll Free: (800) 631-0442 • Fax: (973) 872-1129 • sales@krowne.com • krowne.com

Model:

Project:

Item #:

Qty:

Date:

Approved By:

Hand Sinks w/ Pedal Valves Hand Sinks

HS-14

HS-39

HS-15 HS-16 HS-41

HS-40

HS-42

H

C

D

16" 151

4"

8"

2"

16"

4"

8"

8"

22"

4"

4"153

4"

2"

4"

H

C

D

4"

4"

8"

H

C

D

4"

4"

8"

4"153

4"

2"

4"

4"153

4"

2"

4"

H

C

D

4"

4"

8"

4"

2"

16" 107

8"

H

C

D

4"

4"

8"

4"153

4"

4"

2"

16" 107

8"

8" 77

8"

H H

C

D

C

D

16 3 16"

4"

2"

2"

4"

8"

22"

16 3 16"

4"

2"

2"

4"

8"

22"

4"

H

C

D

16" 151

4"

8"

2"

16"

4"

8"

8"

22"

4"

4"153

4"

2"

4"

H

C

D

4"

4"

8"

H

C

D

4"

4"

8"

4"153

4"

2"

4"

4"153

4"

2"

4"

H

C

D

4"

4"

8"

4"

2"

16" 107

8"

H

C

D

4"

4"

8"

4"153

4"

4"

2"

16" 107

8"

8" 77

8"

H H

C

D

C

D

16 3 16"

4"

2"

2"

4"

8"

22"

16 3 16"

4"

2"

2"

4"

8"

22"

4"

H

C

D

16" 151

4"

8"

2"

16"

4"

8"

8"

22"

4"

4"153

4"

2"

4"

H

C

D

4"

4"

8"

H

C

D

4"

4"

8"

4"153

4"

2"

4"

4"153

4"

2"

4"

H

C

D

4"

4"

8"

4"

2"

16" 107

8"

H

C

D

4"

4"

8"

4"153

4"

4"

2"

16" 107

8"

8" 77

8"

H H

C

D

C

D

16 3 16"

4"

2"

2"

4"

8"

22"

16 3 16"

4"

2"

2"

4"

8"

22"

4"

H

C

D

16" 151

4"

8"

2"

16"

4"

8"

8"

22"

4"

4"153

4"

2"

4"

H

C

D

4"

4"

8"

H

C

D

4"

4"

8"

4"153

4"

2"

4"

4"153

4"

2"

4"

H

C

D

4"

4"

8"

4"

2"

16" 107

8" H

C

D

4"

4"

8"

4"153

4"

4"

2"

16" 107

8"

8" 77

8"

H H

C

D

C

D

16 3 16"

4"

2"

2"

4"

8"

22"

16 3 16"

4"

2"

2"

4"

8"

22"

4"

H

C

D

16" 151

4"

8"

2"

16"

4"

8"

8"

22"

4"

4"153

4"

2"

4"

H

C

D

4"

4"

8"

H

C

D

4"

4"

8"

4"153

4"

2"

4"

4"153

4"

2"

4"

H

C

D

4"

4"

8"

4"

2"

16" 107

8"

H

C

D

4"

4"

8"

4"153

4"

4"

2"

16" 107

8"

8" 77

8"

H H

C

D

C

D

16 3 16"

4"

2"

2"

4"

8"

22"

16 3 16"

4"

2"

2"

4"

8"

22"

4"

Product Details for PTC23K

ITEM DESCRIPTION PACK UNIT

PTC23K 23 Gallon, Black Slender Trash Can 4 PC

Note: Weights and measurements are for reference only and are subject to change without notice. Gross weight differs from net weight and shipping weight.

Product Specs Gross Weight

(Lbs) QTY Length (Inch) Width (Inch) Height (Inch)

Item 6.7 1 19.9 11.0 29.5

Inner Case

Master Case 29.9 4 20.5 11.8 45.5

ITEM 13

Equipment Specifications

Plan View

TGN MODELS

TRUE • Refrigeration - International • www.truemfg.com • UK +44 (0) 1709 888 080 • Germany +49 (0) 7622 6883 0 • Free Phone to U.S. 0 800 894 928

1-SECTION TRUE REACH-IN SWING DOOR REFRIGERATORS / 1-SECTION TRUE REACH-IN SWING DOOR FREEZERS

Specifications subject to change without notice.

Chart dimensions are rounded up to the nearest whole millimeter

INNOVATION

MADE WITH

IN THE USA

† Depth does not include 46 mm for door handle or 13mm for rear mechanical components.

Model Model Type Refrigerant

Number of Shelves

Cabinet Dimensions (mm)

Net Volume (litres) EEC EEI

24 hr/ Energy

Consumption (kWh)

Annual Energy

Consumption (kWh)Width Depth† Height

TGN-1R-1S Vertical Chilled R290 3 Per Section 729 858 2079 435 A 24.8 0.899 328 TGN-1F-1S Vertical Frozen R290 3 Per Section 729 858 2079 435 C 35.9 3.553 1297

STANDARD FEATURES:

• True gastronorm uprights combine functionality, robustness & elegance for a professional kitchen.

• Front-breathing design for zero clearance install.

• Dual slide system with anti-tilt for wire shelves and 2/1 G/N pan storage. 3 sets standard.

• Field reversible door.

• Sleek, heavy-duty metal handles.

• Standard with Locks.

• A Energy Rating on refrigerators, C Energy Rating on Freezers. Climate Class 5.

• R290 environmentally friendly Hydrocarbon refrigerant.

• Temperature range of 0.5˚C to 3.3˚C on refrigerators and -18˚C to -21˚C on freezers.

TGN-1R-1S TGN-1F-1S

A A A A B C D

ENERGIA • EHEPΓИЯ • ENEPΓEIA

ENERGIJA • ENERGY • ENERGIE

ENERGI kWh/annum

L L 2015/1094

F G

E

C

TGN-1F-1S

— 435 5 40°C-40%

A A A A B C D

ENERGIA • EHEPΓИЯ • ENEPΓEIA

ENERGIJA • ENERGY • ENERGIE

ENERGI kWh/annum

L L 2015/1094

F G

E

A

TGN-1R-1S

435 — 5 40°C-40%

OPTIONAL FEATURES/ACCESSORIES:

UPCHARGE AND LEAD TIMES MAY APPLY

• 102 mm standard legs.

• 153 mm standard legs.

• 153 mm seismic/flanged legs.

• 64 mm castors.

• Additional shelves.

729mm 28 23/32"

1994mm 78 1/2"

64mm 2 17/32"

85mm

3 11/32"

2079mm 81 7/8"

858mm 33 25/32"

1951mm 76 13/16"

12mm 15/32"

914mm

36"

46mm

1 13/16"

1562mm 61 15/32"

690mm 27 5/32"

TGN-1R-1S

R

TGN-1R-1S

R

TGN-1R-1S

R

TFI1163_MS_2/2020

ITEM 14

230/50/1 .65A

Project

Item

Quantity

FCSI Section 11400

Approved

Date

760 Beta Drive, Unit D Mayfield Village, Ohio 44143

Tel 1.216.481.4900 Fax 1.216.481.3782 Email steam@clevelandrange.com www.clevelandrange.com

Electric Kettles

TABLE TYPE TWIN ELECTRIC KETTLES

“SPLASH PROOF SERIES”, SELF-CONTAINED, 2⁄3 STEAM JACKETED,

PER KETTLE: 3, 6 OR 12 GALLONS (11, 23 OR 45 LITERS)

Standard Features

• Manual tilting, balanced design

• Space saving design through shared, center console

• Balanced, attractive appearance

• Self-contained, easily installed - needs only an electrical hook-up

• Steam jacket filled with treated water, venting and/or refilling is not required

• Accurate, consistant solid state temperature controls - less than

±1°C variance (ideal for simmering). Operating temperature range from 145° - 260°F (63°C - 127°C) Standard Control Panel includes:

• LED indicator for heat cycle • LED indicator for low water

• Power ON/OFF Dial with 1-10 Temperature Dial Setting easyDial Control Panel (optional) includes:

• Adjustable Temperature Control (C&F) • 99 Minute Adjustable Timer Setting • 3 Cooking Models, Cook/Simmer, Cook/On, Cook Off • 6-Built In Self Diagnostics & Display Readout • Core Temperature Probe (Optional)

• IXP6 rated water resistant

• Water resistant controls, splash-proof construction

• Large pouring lip for high capacity and chunky products

• Re-inforced rolled rim design prevents damage to kettle rim, eliminates "bar rim designs"

• Welded-in heating elements, (holds vacuum better, won't leak or loose water)

• Easily cleaned: kettle and all exterior surfaces are of type 304 stainless steel with an #4 finish

• Rear mounted easy access pressure gauge and pressure relief valve to prevent tampering. Color coded easy to read pressure gauge with "green" and "vent air zone"

• 50 psi steam jacket rating for higher cooking temperatures

• 50 psi safety valve

• Solid state water level control (no sight glass gauge to break or leak)

• Splash proof element cover with a double gasket seal

• Self locking marine type tilting mechanism prevents accidental spills. Balanced design makes it easy to tilt

• Standard for TKET-6-T and TKET-12-T is 208-240 volts, 60 Hz, 3-phase, 3-wire. Models TKET-6-T and TKET-12-T are field rewirable to single phase. (Model TKET-3-T available in single phase, 2-wire only).

• Typical approvals include UL., CSA, CE, NSF and ASME

• 316 Stainless Steel Interior

Options & Accessories

• easyDial Control • Core Temperature Probe Option

• Lift Off Covers (CL)

• Common Hot and Cold (DPK) or Cold only (SPK) Water Faucet with

Swing Spout. Requires Mounting Bracket (FBKT)

• High wattages (HW) and special voltages (see back page)

• Cooking Baskets (BS) • Food Strainers (FS) • Measuring Strips (MS)

• Stainless Steel Equipment Stand with Drain Drawer and Splash

Shield (ST-42 for TKET-3-T & TKET-6-T), (ST-55-t for TKET-12-T)

• Kettle Markings (KM) • Protective Control Panel (PCE)

Short Form Specifications Shall be CLEVELAND, electric twin kettles, Table Type, self-contained, tilting, Model TKET - _____ - T; _____ gallons each, _____ KW, _____ volts, _____ Hz, 3 phase/3 wire or single phase/2 wire:

with Splash Proof Solid State Temperature (±1° C) and Safety Control System in plug-in Module including L.E.D. indicators, Large Pouring Lips, Rear mounted Pressure/Vacuum Gauges, Permanently filled Steam Jackets, 50 psi Steam Jacket Ratings and Safety Valves. Optional Lift Off Covers. 316 Stainless Steel Interior. IPX6 Water Rated.

KE004046-96

Section 5, Page 5 5637A 02 / 2021

Models

• TKET-3-T

• TKET-6-T

• TKET-12-T

ITEM 15

760 Beta Drive, Unit D Mayfield Village, Ohio 44143

Tel 1.216.481.4900 Fax 1.216.481.3782 Email steam@clevelandrange.com www.clevelandrange.com

El ec tr ic

K et tle s

Section 5, Page 6 02 / 2021

(NOT TO SCALE)

20.6 (523)

14 3/4 (375)

3 1/2 (89)12 1/2 (318)

26 1/2 (673)

3 1/4 (83)

(1321)

19 1/8 (486)

24 15/16 (633)

32 7/8 (835)

(762)

1 1/2 (38)

3 (76)

PRESSURE GAUGE,

SAFETY VALVE

AND FILLER BLOCK

1 1/2 (38)

34 1/2 (876)

29 7/8

(759) 14 1/4

(362)

21 1/8 (536)

(457)

1 1/2 (38)

8 1/2 (216)

(559)

14 3/4 (375)

14 1/8 (360)

3/4 (19)12 1/2 (318)

PRESSURE GAUGE,

SAFETY VALVE

AND FILLER BLOCK

14 3/4 (375)

5 5/8 (143)

26 1/2 (673)

3 1/4 (83)

23 3/4 (603)

29 3/4 (756)

16 1/2 (419)

(610)

44 1/4 (1124)

17.6 (447)

1 3/4 (44)12 1/2 (318)

PRESSURE GAUGE,

SAFETY VALVE

AND FILLER BLOCK

1 1/2 (38)

TKET-6-T

FRONT

VIEW

FRONT

VIEW

FRONT

VIEW

TOP

VIEW

TOP

VIEW

TOP

VIEW

SIDE

VIEW

SIDE

VIEW

SIDE

VIEW

TKET-12-T

30" (762)

(610)

(457)

12 27/32 (326)

4 3/8 (111)

6 15/32 (164)

4 27/32 (123)

1 15/16 (49)

5/16-18 THREADED

BUSHINGS

5/16-18 THREADED

BUSHINGS

5/16-18 THREADED

BUSHINGS

1 1/2 (38)

7 9/32 (185)

7 3/8 (187)

(254)

6 3/8 (162)

1 11/32 (34)

12 13/16 (325mm)

12 1/2 (318)

12 1/2 (318)

12 1/2 (318)

TKET-12-T

TKET-6-T

TKET-3-T

BASE MOUNTING DIAGRAMS

(VIEW FROM BOTTOM OF BASE)

BASE MOUNTING DIAGRAMS

(VIEW FROM BOTTOM OF BASE)

BASE MOUNTING DIAGRAMS

(VIEW FROM BOTTOM OF BASE)

CAPACITY (PER KETTLE):

(in 4 oz. servings,other sizes may be calculated) 3 gallons / 11 liters / 96 servings

CAPACITY (PER KETTLE):

(in 4 oz. servings,other sizes may be calculated) 6 gallons / 23 liters / 192 servings

CAPACITY (PER KETTLE):

(in 4 oz. servings,other sizes may be calculated) 12 gallons / 45 liters / 352 servings

NOTE: DIMENSIONS SHOWN IN INCHES / MM

NOTE: DIMENSIONS SHOWN IN INCHES / MM

NOTE: DIMENSIONS SHOWN IN INCHES / MM

STANDARD WATTAGE (per kettle) 208V 240V 415V 480V

AMPS AMPS AMPS AMPS AMPS AMPS AMPS AMPS

GALS. LITERS KW 1PH 3PH KW 1PH 3PH KW 1PH 3PH KW 1 PH 3PH

3 11 8.2 39.3 NA 10.9 45.4 NA NA NA NA NA NA NA

6 23 12.3 59.0 34.1 16.3 68.1 39.3 15.0 36.1 20.9 16.3 34.0 19.6 12 45 19.6 94.4 54.5 26.1 108.9 62.9 24.0 57.8 33.4 26.1 54.4 31.4

HIGH WATTAGE (per kettle)

208V 240V 415V 480V

AMPS AMPS AMPS AMPS AMPS AMPS AMPS AMPS

GALS. LITERS KW 1PH 3PH KW 1PH 3PH KW 1PH 3PH KW 1 PH

6 23 19.6 NA 54.5 26.1 NA 62.9 24.0 57.8 33.4 26.1 54.4 31.4

12 45 24.5 NA 68.1 32.7 NA 78.6 30.0 72.3 41.7 32.7 68.1 39.3

Consult factory for other voltages.

NOTES:

Cleveland Range reserves right of design improvement or modification, as warranted.

Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.

Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are U.L/NSF#4 and CSA (AGA, CGA).

Shipping Weights & Dimensions Model - TKET-3-T Weight - 135 lbs TKET-6-T Weight - 220 lbs

Width - 28” Depth - 54” Height - 39”

TKET-12-T Weight - 304 lbs Width - 28” Depth - 54” Height - 39”

380- 50hz

Quantity

FCSI Section 11400

Approved

Date

18301 St. Clair Street

Cleveland, OH 44110

Tel 1.216.481.4900

Fax 1.216.481.3782

Email steam@clevelandrange.com www.clevelandrange.com

1.216.481.4900

F 1.216.481.3782

E steam@clevelandrange.com

E steam@clevelandrange.com KE004046-125

M odular Bases & Equipm ent Stands

Section 4, Page 29

08 / 2017

55” OPEN TYPE STANDS

Standard Features

• All Stainless Steel construction with 1 1/4" square tubing

• Adjustable Feet (rear feet are flanged for Floor Bolting)

• Removable combination Drain Drawer (with Splash Shield) and Pan Support

• Ideal for mounting table type kettles, mixer kettles and skillets (models KET-3-T, KET-6-T, KET-12-T, KDT-3-T*, KDT-6-T*, KDT-

12-T*, KDT-20-T*, SET-15, SET-10).

• ST-55-T for TKET-12-T only

* Requires Direct Steam Adaptor Top accessory

Options & Accessories

• Direct Steam Adaptor Top (AK)

Short Form Specifications Shall be CLEVELAND, Open Type Equipment Stand with removable Drain Drawer, Splash Shield and Adaptor Top (optional), Model ST-

55. All Stainless Steel construction with 11⁄4" square tubing. Furnished with Level Adjustable Feet (rear feet are flanged for Floor Bolting).

TWO REMOVABLE DRAIN DRAWERS

WITH SPLASH SHIELDS,

ALL STAINLESS STEEL

Models

• ST-55 • ST-55-T

ITEM 15.1

18301 St. Clair Street

Cleveland, OH 44110

Tel 1.216.481.4900

Fax 1.216.481.3782

Email steam@clevelandrange.com www.clevelandrange.com

KE004046-125

M od ul ar B as es E qu ip m en t S ta nd s

Section 4, Page 30

08 / 2017

(NOT TO SCALE)

54 3/4"

22 5/8" 25 1/8"

26 7/8" 191/2"

17 5/8"

7 5/8"

20 3/4"

25 1/8"

2 5/8"

5 1/4"

2 5/8"

26 7/8"

21 3/8" (Drawer Fully Closed)

40 1/4" (Drawer Fully Extended)

DRAIN

PAN

1 1/4" NPT DRAIN

PAN NIPPLE

REAR VIEW / DRAIN PAN DETAIL

39 3/16" 39 11/16"

45 1/16" 35 11/16"

49 13/16"

42 15/16"

53 5/8"

46 1/8"

51 3/4" 37 13/16"

52 3/16" 38 5/16"

48" 41 1/4"

53 3/4"

44 15/16"

46 3/16"

37 5/8"

REAR CLEARANCE - 2" MIN REAR CLEARANCE - 4 1/2" MIN REAR CLEARANCE - 2 1/2" MIN

RIGHT SIDE CLEARANCE - 6" MIN

REAR CLEARANCE - 2 1/2" MIN

RIGHT SIDE CLEARANCE - 6" MIN

REAR CLEARANCE - 0" REAR CLEARANCE - 0" REAR CLEARANCE - 0" REAR CLEARANCE - 2" MIN

REAR CLEARANCE - 0"

KDT-3-T

DIRECT STEAM

ADAPTOR TOP

REQUIRED (AK)

KGT-6-T

KET-3-T

KDT-6-T

DIRECT STEAM

ADAPTOR TOP

REQUIRED (AK)

KGT-12-T

KDT-12-T

DIRECT STEAM

ADAPTOR TOP

REQUIRED (AK)

KDT-20-T

DIRECT STEAM

ADAPTOR TOP

REQUIRED (AK)

SET-10 SET-15

(1 only)

46 3/16"

37 5/8"

45 7/8" 40 3/8"

REAR CLEARANCE - 0" REAR CLEARANCE - 0"

KET-3-T KET-6-T

MOUNTING OPTIONS (SELECT TWO SINGLE UNITS OR ONE TWIN UNIT PER STAND)

NOTES:

Cleveland Range reserves right of design improvement or modification, as warranted.

Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.

Installations of Back Flow Preventers, Vacuum Breakers and other specific code requirements are the responsibility of the Owner and Installer.

Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are U.L., NSF, CGA, CSA, ETL and others.

Quantity

FCSI Section 11400

Approved

Date

18301 St. Clair Street

Cleveland, OH 44110

Tel 1.216.481.4900

Fax 1.216.481.3782

Email steam@clevelandrange.com www.clevelandrange.com

E steam@clevelandrange.comKE004046-126

M odular Bases & Equipm ent Stands

Section 4, Page 31

08 / 2017

Standard Features

• Designed for higher volume pouring

• Dual function:

• Splash Guard - for safer and cleaner pouring

• Pan Shelf - when pans are placed on it they are closer to the pouring lip of kettle or skillet for easier and cleaner pouring

• Heavy gauge stainless steel construction for rugged durability

• Easily removable for cleaning

* Only available for ST-28 stands built on or after September 1, 2004.

For ST stands built prior to September 1, 2004, a complete drawer assembly with retractable splash guard/pan shelf is available (DDSG-28, DDSG-42). For stand model ST-55 order two DDSG-28's.

Models

• SG-28 • SG-42

(For stand model ST-55 order two SG-28's.)

Short Form Specifications Shall be CLEVELAND, Retractable Splash Guard/Pan Shelf, all stainless steel assembly.

RETRACTABLE SPLASH GUARD /

PAN SHELF*,

FOR ST STAND DRAIN DRAWERS

"Splash Shield"

"Pan Shelf"

ITEM 15.2

18301 St. Clair Street

Cleveland, OH 44110

Tel 1.216.481.4900

Fax 1.216.481.3782

Email steam@clevelandrange.com www.clevelandrange.com

KE004046-126

M od ul ar B as es E qu ip m en t S ta nd s

Section 4, Page 32

08 / 2017

(NOT TO SCALE)

AS SPLASH SHIELD

AS PAN SHELF

ST-28

ST-28

ST-42

ST-55

ST-42

ST-55

12.00" 305mm

17.63" 448mm

4.50" 115mm

14.75" 375mm

14.75" 375mm

23.00" 585mm

16.50" 419mm

14.75" 375mm

23.00" 585mm

NOTES:

Cleveland Range reserves right of design improvement or modification, as warranted.

Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.

Installations of Back Flow Preventers, Vacuum Breakers and other specific code requirements are the responsibility of the Owner and Installer.

Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are U.L., NSF, CGA, CSA, ETL and others.

Item 16

1ea Work Table-1 Sink

Custom Fabricated per Plans-Sheet FS5 and Division 114000 Specifications

STANDARD FEATURES

SPECIFICATIONS

APPROVED BY:

CERTIFICATIONS:

Krowne Metal Corporation 100 Haul Rd. Wayne, NJ 07470 • Toll Free: (800) 631-0442 • Fax: (973) 872-1129 sales@krowne.com • www.krowne.com • www.facebook.com/KrowneMetal • www.twitter.com/KrowneMetal

Rev. 05/2012 No. 14-8XX

Printed in the USA

MODEL: ___________________ PROJECT: _______________________ ITEM #: ______________ QTY: __________

■ 1/4 turn high performance ceramic cartridge valve with built-in back flow preventers

■ Heavy-Duty flanges with eccentric fittings for quick installations

■ Heavy-Duty spout with double O-Ring construction and welded shoulder for durability

■ High precision machining and polished nickel chromium finish

■ Color-coded handles

■ Optional wrist blade handles available

■ Mounting kit included (1/2” NPT x 1 1/2” male nipples with locknuts)

■ Full replacement parts available

■ 1 Year Warranty

■ Low Lead Compliance

“L” Models meet California AB-1953 and Vermont S152 standards (Faucet models already listed with the “L” suffix (i.e. 12-806L) are only available in Low Lead Compliant model)

■ 8” on center wall mount with 1/2” NPT male inlets

■ Rough in: Two 7/8” round holes on 8” centers

■ Temperature Range: 40°F to 180°F

■ Flow rate: 2 GPM max

■ Shipping weight: 5 1/2 lbs.

■ Quantity per case: 6

Due to our commitment to continued product improvement, specifications are subject to change without notice.

ROYAL SERIES PLUMBING

8” CENTER WALL MOUNT FAUCETS

PRODUCT IMAGE

14-812 SHOWN

ALSO AVAILABLE IN LOW LEAD BY

ADDING “L” TO MODEL NUMBER

ITEM 17

MODELS

DRAWING

APPROVED BY:

CERTIFICATIONS:

Krowne Metal Corporation 100 Haul Rd. Wayne, NJ 07470 • Toll Free: (800) 631-0442 • Fax: (973) 872-1129 sales@krowne.com • www.krowne.com • www.facebook.com/KrowneMetal • www.twitter.com/KrowneMetal

Rev. 05/2012 No. 14-8XX

Printed in the USA

MODEL: ___________________ PROJECT: _______________________ ITEM #: ______________ QTY: __________

Due to our commitment to continued product improvement, specifications are subject to change without notice.

ROYAL SERIES PLUMBING

8” CENTER WALL MOUNT FAUCETS

STANDARD SPOUTS

Model Numbers Ⓐ Ⓑ Ⓒ 14-806 14-808 14-810 14-812 14-814 14-816 12-818L*

6” 8”

10” 12” 14” 16” 18”

2 3/8” 2 3/8” 2 5/8” 3 1/8” 3 1/2” 4 1/2” 5 1/2”

4 7/8” 4 7/8” 5 1/4” 5 5/8”

6” 7” 8”

NOTE: Add “L” to end of Model Number for Low Lead Model

*Double Jointed Spout

GOOSENECK SPOUTS

Model Numbers Ⓓ Ⓔ Ⓕ 14-801L 14-802L

6” 8 1/2”

6” 7 1/2”

10” 12 7/8”

21-311 Wrist Handle Kit

APPROVED BY:

CERTIFICATIONS:

Krowne Metal Corporation 100 Haul Rd. Wayne, NJ 07470 • Toll Free: (800) 631-0442 • Fax: (973) 872-1129 sales@krowne.com • www.krowne.com • www.facebook.com/KrowneMetal • www.twitter.com/KrowneMetal

Rev. 08/2012 No. 22-201,4

Printed in the USA

MODEL: ___________________ PROJECT: _______________________ ITEM #: ______________ QTY: __________

■ 1-1/4” overflow outlet, cap included

■ 22-201 comes with 1 1/2” drain outlet adapter

■ 22-204 drain outet: 2” NPS Male Outer Threads, 1-1/2” Female

Inner Threads. No adapter required

■ Stainless steel strainer, flange & handle

■ Overflow outlet accepts Overflow Head (22-500) and Overflow

Elbow (22-501)

Due to our commitment to continued product improvement, specifications are subject to change without notice.

ROYAL SERIES PLUMBING

TWIST WASTE DRAIN with 1 1/4” OVERFLOW OUTLET

22-204 SHOWN

THIS PRODUCT DOES NOT REQUIRE

LOW LEAD COMPLIANCE

SPECIFICATIONS

Model Numbers Sink Opening Drain Outlet Quantity per Case

22-201

22-204

3”

3 1/2”

2” NPS Male Outer Threads, 1-1/2” Adapter Included

2” NPS Male Outer Threads, 1-1/2” Female Inner Threads

ITEM 18

CERTIFICATIONS:

Krowne Metal Corporation 100 Haul Rd. Wayne, NJ 07470 • Toll Free: (800) 631-0442 • Fax: (973) 872-1129 sales@krowne.com • www.krowne.com • www.facebook.com/KrowneMetal • www.twitter.com/KrowneMetal

Rev. 08/2012 No. 22-201,4

Printed in the USA

MODEL: ___________________ PROJECT: _______________________ ITEM #: ______________ QTY: __________

Due to our commitment to continued product improvement, specifications are subject to change without notice.

ROYAL SERIES PLUMBING

TWIST WASTE DRAIN with 1 1/4” OVERFLOW OUTLET

225 49th Ave. Dr. SW Cedar Rapids, IA 52404 U.S.A. | 800-233-2366 | 319-368-8120 | Fax: 319-368-8198 | www.acpsolutions.com

Item #:

Project #:

A

IA

File #:

Specification #:

Medium Volume Menumaster Commercial Microwave Model RCS511TS

Power Output l 1100 watts of power l Five power levels for consistent, delicious results for frozen, refrigerated and fresh foods - from the freezer to table in minutes.

Easy to Use l Up to 100 programmable menu items simplifies cooking and ensures consistent results.

l Four stage cooking option for easy one-touch cooking.

l Multiple quantity pad calculates the proper cooking times for multiple portions.

l User friendly touch controls are easy to use.

l Time entry option for added flexibility.

l Digital display with countdown timer for simple operation and “at-a-glance” monitoring.

l Braille touch pads.

l See-through door and lighted interior for monitoring without opening the door.

l 34 Liter (1.2 cubic ft.) capacity accommodates a 356 mm (14”) platter, prepackaged foods and single servings.

l Stackable to save valuable counter space.

Easy to Maintain l Stainless steel exterior and interior for easy cleaning and a professional look.

l Non-removable air filter protects oven components.

l Constructed to withstand the foodservice environment.

l Backed by the ACP, Inc. 24/7 ComServ Support Center.

Medium Volume This category of microwave is ideal for...

Applications:

- Pizza restaurants

- Casual dining

- Clubs

- Deli

Defrost:

- Defrosts most frozen food products

All ACP, Inc. commercial ovens are supported by our Culinary Center.

Do not hesitate to contact us for any questions regarding food preparation, menu development and cooking times:

testkitchen@acpsolutions.com

Model RCS511TS shown

© 2017 ACP, Inc.

Cedar Rapids, Iowa 52404

ITEM 19

(Existing item-Verify data in field)

22” (559)

13-7/8” (352)

21” (533)

17-1/4” (438)

19” (483)

4” (102)1”

(25)

32-3/4” (832)

1-1/2” (38)

A

IA

F ile

Sp ec ifi ca tio n

225 49th Ave. Dr. SW Cedar Rapids, IA 52404 U.S.A. | 800-233-2366 | 319-368-8120 | Fax: 319-368-8198 | www.acpsolutions.com

Menumaster Commercial Microwave Model RCS511TS | Medium Volume

Specifications Model RCS511TS UPC Code 728028020762 Configuration Countertop Control System Touch Programmable Control 10 pads Settings Programmable 100 Max. Cooking Time 60:00 Power Levels 5 Defrost Yes Time Entry Option Yes Microwave Distribution Rotating antenna, top Magnetron(s) 1 Display VFD Stackable Yes Stage Cooking Yes, 4 Interior Light Yes Door Handle Grab & Go Signal End of cycle, adjustable Air Filter Non-removable with cleaning reminder Multiple Portion Setting Yes, X2 Exterior Dimensions H 352 (13 7/8”) W 559 (22”) D*483 (19”) Cavity Dimensions H 216 (8 1/2”) W 368 (14 1/2”) D 381 (15”) Door Depth 832 (32 3/4”), 90o+ door open Usable Cavity Space 34 Liters (1.2 cubic ft.)

Exterior Finish Stainless steel Interior Finish Stainless steel Power Consumption 1600 W Power Output** 1100 W** Microwave Power Source 230V 50 Hz, 16 A single phase

Plug Configuration / Cord CEE 7/7 “Shuko” 1.5 m (5 ft.)

Frequency 2450 MHz Product Weight 19 kg. (41 lb.)

Ship weight (approx.) 21 kg (47 lb.)

Shipping Carton Size H 422 (16 5/8”) W 640 (25 3/16”) D 502 (19 3/4”) UPS Shippable Yes

Specifications Commercial microwave 10 touch pad control panel shall be programmable with the ability to program up to 100 menu items with two multiple portions. Touch pad shall include Braille for ADA compliance. Cooking timer shall be 60 minute, countdown style with a time entry option and an adjustable end of cycle audible signal. There shall be 5 power levels, in-cluding defrost and 4 cooking stages. Microwave output shall be 1100 watts distributed by one magnetron with a rotating top antenna to provide superior even heating throughout the cavity. Durable door shall have a tempered glass window and a grab and go handle with a 90o+ opening for easy access.

An interior light shall facilitate monitoring without opening the door. The large 34 Liter (1.2 cubic ft.) cavity shall accom-modate a 356 mm (14”) platter. Interior ceramic shelf shall be sealed and recessed on oven bottom to reduce plate-to-shelf edge impact. Oven shall have a stainless steel interior and ex-terior and be stackable to save counter and shelf space. Front air filter shall be permanently affixed to the front off the oven and have a clean filter reminder.

Safety and Sanitation This ACP, Inc. product meets and exceeds safety and sanita-tion standards set for commercial microwave ovens by ETL EU and CE

Warranty Warranty Certificate for this product can be found by locating it on the ACP, Inc. website at:

www.acpsolutions.com/warranty

Service All products are backed by our 24/7 ComServ Support Center.

Measurements are in millimeters

* Includes handle ** IEC 60705 Tested

© 2017ACP, Inc.

Cedar Rapids, Iowa 52404

Part No. 20154747 Updated 7/7/2017 Original Instructions

Installation Clearances - Top: 51 (2”), Sides: 25 (1”), Back: None

Project: Quantity: Item No: FCSI Section: Approval: Date:

Specification CombiMaster® Plus CMP 61 E (6 x 12 x 20 inch/6 x 13 x 18 inch)

Thu Apr 26 16:06:39 CEST 2018

Approval/Labels

Capacity

• Six (6) Half-size sheet pans (13"x18") or Six (6) Steam table pans

(12"x20"x2.5") GN1/1

• Removable, swivelling hinging rack

• Vertical distance between rails 2 5/8" (68 mm) Standard Features

• Electrically heated table device for cooking of meat, poultry, fish, side dishes, vegetables, egg dishes, desserts, bakery products and for automatic rethermalization

• Combi-steamer according to DIN 18866, DIN 10535 for selective use of steam and hot air, separately, sequentially, or combined

• 2-Year parts and labor warranty

• 5-Year steam generator warranty

• No-charge 4-hour RATIONAL certified chef assistance program

• Probe for core temperature measurement

• ClimaPlus® – humidity measurement, 5 stage setting and regulation

• Combi-steamer mode °F/(°C): steam: 85 to 265/(30 to 130), hot air: 85 to

575/(30 to 300), combination: 85 to 575/(30 to 300)

• Individual programming of at least 100 cooking programs with up to 6 steps transferable via USB

• High-performance fresh steam generator, pressureless

• 5 programmable fan speeds

• Integral, maintenance-free grease extraction system with no additional grease filter

• Single water connection as shipped, can be split connection for treated and untreated water

• Turbo fan cool down function

• Dynamic air mixing

• Automatic adaptation to the installation location (elevation)

• Unit door with rear-ventilated double-glass panel and hinged inner panel

• Height adjustable feet +- 3/8" (10 mm)

• 304 (DIN 1.4301) stainless steel material inside and out

• Seamless interior and with rounded corners

• Temperature units can be set in °F/(°C)

• Digital temperature display

• Digital timer, 0-24 hours with permanent setting

• USB Interface

• Demand-related energy supply

• UL listed as Commercial Cooking Appliance with Integral Systems for

Limiting the Emission of Grease-laden Air Operation

• Mode selector for cooking modes, separate controls for temperature, core temperature and time settings

• LED illuminated display, visible from a distance

• Clear control panel Safety features

• Detergent and rinse tabs (solid detergents) for optimum working safety

• VDE approved for unsupervised operation

• HACCP data output and software update via integral USB port

• Safety temperature limiter for steam generator and hot-air heating

• Maximum rack height 5 ¼ ft./1.60 m when original stand is used

• Integral fan impeller brake

• Door handle with right/left and slam function

• Splash an hose-proof to IPX5 Cleaning & care

• 3 automatic cleaning programs

• Service Diagnostic system (SDS) with automatic service notices displayed

• Menu-guided user descaling program

• Hand shower with automatic retracting system Ventilation approvals

• This appliance conforms to the EPA 202 test in accordance to the

ANSI/NFPA 96 "Ventilation Control and Fire Protection of Commercial Cooking Operations" Refer to UL Listing KNLZ.E148536 (America) or KNLZ7.E148536 (Canada).

ITEM 20

CombiMaster® Plus CMP 61 E (6 x 12 x 20 inch/6 x 13 x 18 inch)

Thu Apr 26 16:06:39 CEST 2018

RATIONAL USA Inc.

1701 Golf Road, Suite C-120, Commercium Rolling Meadows, IL 60008 Toll Free: 888-320-7274, Fax.: 847-755-9583

Visit us on the internet: www.rationalusa.com We reserve the right to make technical improvements

Combi-Steamer mode

Steam between 85-265 °F (30-130 °C)

Hot-air from 85-575 °F (30-300 °C)

Combination of steam and hot-air 85-575 °F (30-300° C)

ClimaPlus

Climate management - humidity measurement, 5-stage setting and regulation

Technical Specification Dimensions Width Depth Height Exterior 33 3/8'' (847 mm) 30 1/2'' (776 mm) 30 3/4'' (782 mm) Incl. Vent/Handle - 33'' (838 mm) 32 3/4'' (832 mm) Shipping 37 3/8'' (950 mm) 36 1/4'' (920 mm) 39 3/8'' (1,000 mm)

Weight Max Per Shelf 33 lbs Max Load Size 66 lbs Net 232 lbs Shipping 265 lbs

Size Electric. 60 hz Breaker Cable connection Running Amps 61 208V 1 PH 60A #4 53.4 amps 61 240V 1 PH 70A #4 61.5 amps 61 208V 3 PH 35A #8 30.8 amps 61 240V 3 PH 40A #8 35.5 amps 61 480V 3 PH 25A #14 15.8 amps 61 440V 3 PH 20A #14 14.6 amps

Not supplied with cable connection. Use copper wire only. 3Ph 4-wire system (3 wire w/ ground)-dedicated 3 pole circuit breaker required. 1 Ph L1, L2, G-dedicated 2 pole circuit breaker required. 208 v is field retrofittable to 240v, 480v is field retrofittable to 440v. Special voltages available upon request. Do not use fuses.

Thermal load and airflow requirements Latent 595 W Sensible 758 W Unit free standing 13314 ft²/h One side against a wall 8405 ft²/h Noise values 65 dBA

Connected load electric Hot air connection: 10.6 kW Steam connection: 9 kW Connected load electric: 11.1 kW

Water Requirements Connection 3/4'' Supply Minimum 1/2” ID Drinking Quality Cold Pressure 21-87 psi (1.5-6 bar) Average Water Consumption

0.8 gal/h

Min/Max Flow Rate 3 gpm/5.27 gpm Water Drain 2” OD (50 mm) hub

Connect only to 2" (XS = 1 5/8") high-temperature resistant pipe. Water discharge temperature can be field adjusted to meet section 701.7 of the Inter-national Plumbing Code. Contact RATIONAL for back flow recommendation.

Water Quality Untreated water can be 0 to 24.5 gr/gal (0 to 420ppm) hardness. We do not recommend treated water hardness < 5 gr/gal (86ppm) because the water could be corrosive. Sodium ion exchangers are not recommended; H+ Ion exchange systems are recommended. Water that does not meet the following minimum standards will require the proper conditioning.

Contaminant Water Requirements If > than recommended Sand/Particles < 15 µm Particle filter Chlorine (Cl2) < 0.12 gr/gal (0.2 ppm) Active carbon filter Chloride (Cl-) < 4.68 gr/gal (80 ppm) RO or deionization

Clearance Requirements To facilitate servicing, we recommend leaving a 18"-20" (450-500 mm) gap on the left-hand side of the unit. If there is not 18"-20" (450-500 mm) left side clearance available, provisions for moving the unit or appliance to the left for service access must be made. These include, but are not limited to, having quick connections (water, gas, etc.) and lengthened electrical connections with flexible cords. If there are no external heat sources acting on the unit, there should be a minimum gap of 2” (50 mm) to the left, right, and back of unit.