REQUEST FOR QUOTATION

(THIS IS NOT AN ORDER)

THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

15. DATE OF QUOTATION

16. SIGNER

a. NAME (Type or print)

c. TITLE (Type or print)

b. TELEPHONE

AREA CODE

NUMBER

STANDARD FORM 18 (REV. 6/1995)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not usable

8. TO:

b. COMPANYa. NAME

c. STREET ADDRESS

d. CITY e. STATE f. ZIP CODE

9. DESTINATION

a. NAME OF CONSIGNEE

b. STREET ADDRESS

d. STATE e. ZIP CODE

7. DELIVERY

FOB DESTINATION

OTHER

(See Schedule)

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5a ON OR BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5a. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or service. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotation must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State and local taxes)

ITEM NUMBER

(a)

SUPPLIES/SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e)

AMOUNT

(f)

12. DISCOUNT FOR PROMPT PAYMENT

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%) d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

b. STREET ADDRESS

c. COUNTY

d. CITY e. STATE f. ZIP CODE

14. SIGNATURE OF PERSON AUTHORIZED TO

SIGN QUOTATION

PAGE OF PAGES

1. REQUEST NUMBER 2. DATE ISSUED 3. REQUISITION/PURCHASE REQUEST NUMBER 4. CERT. FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

RATING

5a. ISSUED BY 6. DELIVER BY (Date)

NAME TELEPHONE NUMBER

AREA CODE NUMBER

c. CITY

5b. FOR INFORMATION CALL (NO COLLECT CALLS)

6006 Schroeder Road

USGS OAG DENVER ACQUISITION BRANCH

PO BOX 25046

204 DENVER FEDERAL CENTER

DENVER CO 80225-0046

0044040075140G0226Q0106

Lisa Williams

236-9327 USGS National Wildlife Health Cente

53711

09/02/2026

09/11/2026 1430 MD

30 Days After Receipt of Order

Madison

WI

Histology Sorting and Filing System

1. This is a Solicitation issued as a

Request for Quotations (RFQ). Submit written quotations on RFQ Number

140G0226Q0106. This solicitation will utilize FAR Overhaul Part 12, Acquisition of Commercial Products and

Commercial Services, using streamlined evaluation and award procedures.

2. The solicitation document and incorporated provisions and clauses are those in effect through Federal

Acquisition Circular (FAC) 2026-01 and the FAR Overhaul deviations.

Continued...

1 44

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGES

NAME OF OFFEROR OR CONTRACTOR

SUPPLIES/SERVICES

(B)

UNIT

(D)

UNIT PRICE

(E)

AMOUNT

(F)

OPTIONAL FORM 336 (4-86)

Sponsored by GSA FAR (48 CFR) 53.110

ITEM NO.

(A)

QUANTITY

(C)

NSN 7540-01-152-8067

140G0226Q0106

3. The solicitation is NOT a Small Business

Set-Aside. The North American Industry

Classification System (NAICS) code is 334516

(Analytical Laboratory Instrument

Manufacturing) and the size standard is 1,000 employees.

4. In accordance with FAR Provision 52.204-7

System for Award Management. (NOV 2024)

(Deviation MAR 2026), Vendors shall have an active Federal Government contracts registration in the System for Award Management

(SAM) when submitting an offer or quotation in response to this solicitation and at the time of award. To register in SAM, go to https://www.sam.gov. Allow for processing time when registering in SAM. If the Offeror is not registered in SAM, it should register immediately after receiving this solicitation.

5. Please download attached Solicitation

140G0226Q0106 for all Clauses and Provisions and Attachments provided in this announcement.

00010 1 EAOne (1) Histology Sorting and Filing System for the the United States Geological Survey (USGS), National Wildlife Health Center (NWHC), Madison, WI in accordance with the attached product specifications/requirements and Terms and Conditions contained herein.

Anticipated Award Type: Firm-fixed-price

Delivery: 30 Days After Receipt of Order

RFQ 140G0226Q0106

Table of Contents

Product Specifications/Requirements DOI ELECTRONIC INVOICING Electronic Invoicing and Payment Requirements - Invoice Processing Platform (IPP) (February 2021) FISMA Information Technology Security Requirements Summary ICT Accessibility Requirements Statement per the Revised Section 508 of the Rehabilitation Act INTERNET PROTOCOL INTERNET PROTOCOL version 6 (June 2012) GS0199 Prevention of Malicious Code (JUN 2018) GS0231 Technical Liaison – Technical Clarification (DEC 2024) GS0919 Legal Holidays (JUN 2021) GS1131 Unilateral Deobligation of Unexpended Funds (MAY 2013) GS1376 Software Licensing Agreements JUL 2001 52.212-4 Contract Terms and Conditions - Commercial Products and Commercial Services. (NOV 2023) (Deviation MAR 2026) 52.222-90 Addressing DEI Discrimination by Federal Contractors (Deviation April 2026) 52.240-91 Security Prohibitions and Exclusions (Deviation MAR 2026) 52.252-2 Clauses Incorporated by Reference. (FEB 1998)

52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (NOV 2020)

GS2101 Inquiries (NOV 2020) GS2115 Independent Review of Protests to the Agency (MAY 2024) 52.212-1 Instructions to Offerors—Commercial Products and Commercial Services (SEPT 2023) (Deviation MAR 2026) 52.216-1 Type of Contract. (APR 1984) 52.219-1 Small Business Program Representations. (FEB 2024) (Deviation JAN 2026) 52.225-2 Buy American Certificate. (OCT 2022)

52.240.90 Security Prohibitions and Exclusions Representations and Certifications (RFO DEVIATION MAR 2026) Basis for Award Quotation Submission Instructions to Vendors Questions – Cutoff Electronic Submission of Quotations – Required 52.252-1 Solicitation Provisions Incorporated by Reference. (FEB 1998) 52.252-5 Authorized Deviations in Provisions (Nov 2020)

Clauses:

Product Specifications/Requirements

A. Introduction:

The United States Geological Survey (USGS), National Wildlife Health Center (NWHC), Madison, WI has a requirement to purchase a new Histology Sorting and Filing System.

B. Background:

The National Wildlife Health Center (NWHC) is a science center of the U.S. Geological Survey (USGS) with specialized laboratories dedicated to wildlife disease detection, control, and prevention. Our mission is to advance wildlife health science for the benefit of animals, humans, and the environment. For our wildlife disease and mortality investigations, we routinely collect tissues for histopathology. The final products generated from that work are glass pathology slides, and paraffin embedded blocks containing fixed tissue. Our slide and block archives currently require a significant amount of staff time for filing and organization, and we do not have a working inventory of these archives. We have roughly 170,000 slides and 185,000 blocks in our archive. We do have a system for knowing what slides and blocks are created but not one for tracking what has been filed or removed from the archive. This system would allow us to automatically file and track what slides and blocks enter our archive, with the ability to sort between cases and projects, digitally capturing all the data on each item. This equipment will reduce staff time by automating what is currently a manual process while improving the tracking and itemization of our histology archive.

C. Product Specifications for a Histology Sorting and Filing System: Provide an automated system to accurately sort, index and retrieve histology slide and block location, ensuring sample traceability meeting the following specifications:

1. Required Capabilities

1.1 Sorting Functions:

a. Accept incoming histology slides in batches; automated sorting and inventorying of standard glass pathology slides (all stain types – standard size 25.4 mm × 76.2 mm with a thickness of 1.0–1.2 mm).

b. Automatically sort based on configurable metadata: case number, accession number, stain type, date, or lab-defined categories.

c. Minimum processing rate of 200 slides/hour and 500 blocks/hour.

d. Support both manual and barcode-driven sorting.

1.2 Filing & Storage:

a. Track every item’s storage location through software (database or LIMS integration).

1.3 Tracking & Identification:

a. Mandatory support for 1D and 2D barcode formats.

b. Automatic logging of handling events, custody transfers, and file movements.

c. Unique identifier preservation throughout the entire workflow.

1.4 Retrieval:

a. Enable rapid search and location retrieval by multiple criteria (case number, date, stain, storage location).

2. System Software Features

a. User-friendly interface with role-based permissions.

b. Audit logs that meet federal and scientific data management standards.

c. Integration options for LIMS or other lab databases (API preferred).

d. Error handling for misreads, duplicate IDs, or invalid metadata.

e. Daily automatic data backup.

3. Physical & Environmental Requirements

a. Compact footprint suitable for histology laboratory bench placement.

b. Operation within controlled lab ranges:

o Temperature: 15–30°C o Humidity: 10–60% non-condensing

c. Materials resistant to biological staining chemicals (xylene, formalin vapors, etc.).

d. System must be easy to clean and maintain.

4. Safety & Compliance

a. Must comply with OSHA laboratory standards.

b. Electrical components compliant with UL or equivalent safety certifications.

c. If robotic handling is present, include safeguards against pinch points, misfeeds, and collisions.

5. Performance Metrics

a. Sorting accuracy: ≥ 99.5%

b. Barcode read accuracy: ≥ 99.8%

c. System uptime/reliability: ≥ 98%

d. Lost/misfiled slide rate: < 0.1%

D. Requirements:

D.1 Maintenance and Support

a. Vendor must provide user training for two people, operator manuals, and preventative maintenance for a minimum of one year.

b. Service agreement for repairs:

o Onsite response ≤ 72 hours o Remote support available during lab operating hours

D.2 Deliverables

a. System hardware

b. Software package and licenses

c. Integration documentation

d. Training sessions for two USGS lab staff

e. Warranty and maintenance schedule

f. On-Site Installation

(End of Minimum Product Specifications/Requirements)

DOI ELECTRONIC INVOICING Electronic Invoicing and Payment Requirements - Invoice Processing Platform (IPP) (February 2021)

Payment requests must be submitted electronically through the U. S. Department of the Treasury's Invoice Processing Platform System (IPP).

"Payment request" means any request for contract financing payment or invoice payment by the Contractor. To constitute a proper invoice, the payment request must comply with the requirements identified in the applicable Prompt Payment clause included in the contract, or the clause 52.212-4 Contract Terms and Conditions - Commercial Items included in commercial item contracts. The IPP website address is: https://www.ipp.gov.

Under this contract, the following documents are required to be submitted as an attachment to the IPP invoice: A copy of the Contractor’s internally generated invoice.

The Contractor must use the IPP website to register access and use IPP for submitting requests for payment. The Contractor Government Business Point of Contact (as listed in SAM) will receive enrollment instructions via email from the Federal Reserve Bank of St. Louis (FRBSTL) within 3 - 5 business days of the contract award date.

Contractor assistance with enrollment can be obtained by contacting the IPP Production Helpdesk via email IPPCustomerSupport@fiscal.treasury.gov or phone (866) 973-3131.

If the Contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the Contractor must submit a waiver request in writing to the Contracting Officer with its proposal or quotation.

FISMA Information Technology Security Requirements Summary

COTS

Hardware or Software

Development or Maintenance of Custom Applications

Outsourced IT Services or On-site Support

Requirements herein are incorporated as part the Statement of Work/ Performance Work Statement:

1 N/A ☐ ☐ Background Investigations. The Contractor shall perform in accordance with clause “Security Requirements: Facility Access and Information Technology.”

2 N/A ☐ ☐

Non-disclosure Agreement. Prior to receiving access to USGS computers, contractor employees shall be required to sign nondisclosure or other system security agreements, depending on the systems to be used and level of access granted.

Applies whenever any contractor employee has unsupervised access to a USGS system (even if only basic network, internet or email or will develop custom applications) such as:

• User Access to USGS IT Systems known to contain sensitive or proprietary data

• IT Support services (greater than user access)

• Development or Maintenance of Custom Applications

• On-site contractor support and management of IT system

• Off-site contractor Oversight and Management of IT System

COTS

Hardware or Software

Development or Maintenance of Custom Applications

Outsourced IT Services or On-site Support

Requirements herein are incorporated as part the Statement of Work/ Performance Work Statement:

Contractor will have access to Privacy Act System of Records – Work under this contract will involve design, development or operation of (access to) system(s) of records containing personal information protected by the Privacy Act (5 U.S.C.

Section 552a).

• IT Security Services Privacy Act System: [Identify covered system(s) to which the contractor may have access] Click or tap here to enter text.

Work to be performed: [Summarize nature of the contractor's use of such records, such as]

• User-level access to system containing protected records

• Operation or maintenance of Privacy Act System of records or computers hosting such system

• Design or modification of a Privacy Act system of records]

The contractor is not required or permitted to respond to requests for Privacy Act data or to make decisions about releases of data under the Act. Contractor shall ensure its employees are instructed to safeguard against improper use or release of such data and advise them that violation of the Act may involve criminal penalties. The contractor will comply with FAR clause 52.224-2, Privacy Act, incorporated herein by reference and with DOI Privacy Act regulations at 43 CFR 2, Subpart D

3 N/A ☐ ☐ Training. The Contractor shall perform in accordance with clause “Security Requirements:

Facility Access and Information Technology” - Contractor employees must successfully complete DOI’s end- user computer security awareness training prior to being granted access to DOI data or being issued a user account. Training must be renewed annually. Additionally, the contract employees must sign a Statement of Responsibility (SOR) that states they have read the appropriate Rules of Behavior and other applicable Information security policies.

4 N/A ☐ ☐ Personnel Changes. The Contractor shall perform in accordance with clause “Security Requirements: Facility Access and Information Technology” - The contractor must notify the COR immediately when an employee working on a DOI system is reassigned or leaves the contractor’s employ.

COTS

Hardware or Software

Development or Maintenance of Custom Applications

Outsourced IT Services or On-site Support

Requirements herein are incorporated as part the Statement of Work/ Performance Work Statement:

Applies whenever any contractor employee has unsupervised access to a USGS system (even if only basic network, internet or email or will develop custom applications) such as:

• User Access to USGS IT Systems known to contain sensitive or proprietary data

• IT Support services (greater than user access)

• Development or Maintenance of Custom Applications *

• On-site contractor support and management of IT system

• Off-site contractor Oversight and Management of IT System

• IT Security Services * *May not be applicable for off-site performance.

5 N/A ☐ ☐ Contractor Location. The Contractor shall perform in accordance with clause “Security Requirements: Facility Access and Information Technology.”

Applies whenever any contractor employee has unsupervised access to a USGS system (even if only basic network, internet or email or will develop custom applications) such as:

• User Access to USGS IT Systems known to contain sensitive or proprietary data

• IT Support services (greater than user access)

• Development or Maintenance of Custom Applications

• On-site contractor support and management of IT system

• Off-site contractor Oversight and Management of IT System

• IT Security Services

No portion of the services to be performed hereunder may be performed outside the United States without the express written permission of the Contracting Officer.

If services are proposed to be performed abroad, the Contractor shall provide an acceptable security plan that addresses mitigation of problems related to communication, control, and protecting the confidentiality, integrity, and availability of IT systems and information.

COTS

Hardware or Software

Development or Maintenance of Custom Applications

Outsourced IT Services or On-site Support

Requirements herein are incorporated as part the Statement of Work/ Performance Work Statement:

A Security Plan Template is available upon request from the Contracting Officer.

6 N/A ☐ N/A Applicable Standards. The Contractor shall perform in accordance with clause “Security Requirements: Facility Access and Information Technology” - Contractor must follow the DOI System Development Life Cycle (SDLC), NIST SP 800-64 and the DOI SDLC Security Integration Guide.

7 N/A ☐ ☐ Asset Valuation-Security Categorization:

The Contractor shall perform in accordance with clause “Security Requirements: Facility Access and Information Technology.”

☐User Access to USGS IT Systems - The Government is responsible for security categorization on USGS systems to which the Contractor may have access under this contract.

☐IT Support Services greater than User- Level Services Choose One:

☐The Government is responsible for security categorization on USGS systems to which the Contractor may have access under this contract.

☐The Government has defined the [insert name of system to be developed, operated or maintained by the contractor] to be a [Major Application], [Minor Application] or [General support system] as defined in OMB Circular A- 130, Appendix III and NIST SP800-53.

The following risk and sensitivity levels have been assigned based on the FIPS 199 and the NIST SP 800-60.

Mission impact: Click or tap here to enter text.

Data sensitivity:Click or tap here to enter text.

Risk Level:Click or tap here to enter text.

Bureau/departmental/national criticality: Click or tap here to enter https://insight.usgs.gov/aei/offices/oa/oag/AOP/guidefordevelopingsecurityplans.pdf

COTS

Hardware or Software

Development or Maintenance of Custom Applications

Outsourced IT Services or On-site Support

Requirements herein are incorporated as part the Statement of Work/ Performance Work Statement:

text.

☐Off-Site Oversight and Management of IT System- The Contractor shall use the FIPS 199 and the NIST SP 800- 60 to determine information types and security categorization based on mission impact, data sensitivity, risk level, and bureau / departmental / national criticality for Contractor-owned and operated systems used to provide services under this contract. Solicitations must include either the complete publication or a reference to public facilities, such as a website or office, where it may be accessed.

☐IT Security Services - Applies only if the purpose of the contract includes obtaining asset valuation services. The Contractor shall use the FIPS 199 and the NIST SP 800- 60 to determine information types and security categorization based on mission impact, data sensitivity, risk level, and bureau / departmental / national criticality for Contractor-owned and operated systems used to provide services under this contract. Solicitations must include either the complete publication or a reference to public facilities, such as a website or office, where it may be accessed.

8 ☒ ☐ The Government shall be granted unlimited rights in software or data produced hereunder as described in FAR clause 52.227-17, Rights in Data— Special Works, incorporated by reference herein.

Select either COTS or custom software language as applicable. If both apply, identify software/data deliverables governed by each clause.

Property Rights.

1. For Federal Supply Schedule orders or orders under an existing contract, rights to software acquired hereunder are set forth in the basic contract.

2. For open market contracts, the Government's rights in software delivered hereunder shall be as described in software developer's commercial software license agreement or the clause FAR 52.227-19, Commercial Computer Software- Restricted Rights, whichever is greater.

COTS

Hardware or Software

Development or Maintenance of Custom Applications

Outsourced IT Services or On-site Support

Requirements herein are incorporated as part the Statement of Work/ Performance Work Statement:

9 N/A ☐ ☐ Independent Verification and Validation (IV&V). The Government is responsible for independent software verification and validation prior to being moved into production.

On-Site Contractor Support and Management of IT System Choose One:

☐Software will be independently verified and validated by the Government or another selected contractor prior to being moved into production.

☐Contractor will ensure that independent verification and validation is performed on software deployed on contractor managed systems containing USGS data, in accordance with DOI SDLC Security Integration Guide

☐Off-Site Contractor Operation and Management of IT System Contractor will ensure that independent verification and validation is performed on software deployed on contractor managed systems containing USGS data, in accordance with DOI SDLC Security Integration Guide

☐IT Security Service - Applies only if the purpose of the contract includes obtaining IV&V services.

10 N/A ☐ Applies if the purpose of the contract includes obtaining C&A services.

☐ Certification & Accreditation.

☐User Access to USGS IT Systems or IT Supports Services (Greater than User Access) Certification and Accreditation on USGS systems to which the Contractor may have access under this contract will be conducted by the Government or another of its contractors.

COTS

Hardware or Software

Development or Maintenance of Custom Applications

Outsourced IT Services or On-site Support

Requirements herein are incorporated as part the Statement of Work/ Performance Work Statement:

☐Development or Maintenance of Custom Applications The contractor will perform Certification and Accreditation (C&A) services on the application developed or maintained hereunder prior to going into production. The application must be re-accredited every three years or whenever there is a major change that affects security. C&A documents will be provided to the COR in both hard copy and electronic forms. The contractor must follow NIST SP 800-37, 800-18, 800-30, 800-60, 800-53A, Federal Information Processing Standard (FIPS) 199 and 200, the associated DOI guides/templates, the DOI Security Test & Evaluation (ST&E) Guide, and the DOI Privacy Impact Assessment. NIST documents are available on the internet at http://csrc.nist.gov/publications/nistpubs/ FIPS documents are available on the internet at http://csrc.nist.gov/publications/nistpubs/. The contractor may request copies of DOI documents by contacting the Contracting Officer. The government reserves the right to conduct the ST&E using either Government personnel or an independent contractor. The contractor will take immediate and timely action to correct or mitigate any weaknesses discovered as necessary to bring the application or system into compliance with the above requirement.

☐On-Site Contractor Support and Management of IT System or Off-Site Contractor Operation and Management of IT System The Contractor must maintain systems that are compliant with NIST SP 800-18, 800-30, 800-37, 800-53A, 800-60, Federal Information Processing Standard (FIPS) 199 and 200, the associated DOI guides/templates, the DOI Security Test & Evaluation (ST&E) Guide, and the DOI Privacy Impact Assessment. As required by the above, Major Applications and General Support Systems shall be certified and accredited (C&A) prior to going into production and re-accredited every three years or whenever there is a major change that affects security. C&A documents will be provided to the COR in both hard copy and electronic forms. NIST documents are available on the internet at http://csrc.nist.gov/publications/nistpubs/. The contractor may request copies of DOI documents http://csrc.nist.gov/publications/nistpubs/ http://csrc.nist.gov/publications/nistpubs/ http://csrc.nist.gov/publications/nistpubs/

COTS

Hardware or Software

Development or Maintenance of Custom Applications

Outsourced IT Services or On-site Support

Requirements herein are incorporated as part the Statement of Work/ Performance Work Statement:

by contacting the Contracting Officer. The government will reserve the right to conduct the ST&E, using either Government personnel or an independent contractor. The contractor will take immediate and timely action to correct or mitigate any weaknesses discovered as necessary to bring the application or system into compliance with the above requirement.

11 N/A for COTS HW & SW, User Access to USGS IT Systems (other than IT services), IT Support Services (User Level or greater access)

N/A ☐ Internet Logon Banner. The Contractor shall perform in accordance with clause “Security Requirements: Facility Access and Information Technology.”

☐Develop or Maintenance of Custom Applications or Onsite Contractor Support and Management of IT System or Off-site Contractor Oversight and Management of IT System – Web based applications developed or maintained under this contract must contain a USGS approved logon Banner:

https://portal.doi.net/CIO/ITPMgmt/Documents/IT Standards/IT Security/DOI Security Control Standards (based on NIST SP 800-53 Revision 3)/Access Control v1.4.pdf

12 N/A ☐ ☐ Incident Reporting. The Contractor shall perform in accordance with contract clause “Security Requirements: Facility Access and Information Technology” - The contractor must report computer security incidents affecting DOI data or systems in accordance with the DOI Computer Incident Response Guide.

13 ☒ ☐ ☐ Quality Control. All software or hardware purchased must be free of malicious code such as viruses, Trojan horse programs, worms, spyware, etc. Validation of this must be written into the contract.

14 N/A N/A ☐ Self-Assessment. The Contractor shall perform in accordance with contract clause “Security Requirements: Facility Access and Information Technology” - The contractor must conduct an annual self-assessment in accordance with annual DOI guidance on all information systems in production.

15 N/A ☐ ☐ Vulnerability Analysis. Vulnerability Analysis on USGS systems to which the https://portal.doi.net/CIO/ITPMgmt/Documents/IT%20Standards/IT%20Security/DOI%20Security%20Control%20Standards%20(based%20on%20NIST%20SP%20800-53%20Revision%203)/Access%20Control%20v1.4.pdf https://portal.doi.net/CIO/ITPMgmt/Documents/IT%20Standards/IT%20Security/DOI%20Security%20Control%20Standards%20(based%20on%20NIST%20SP%20800-53%20Revision%203)/Access%20Control%20v1.4.pdf https://portal.doi.net/CIO/ITPMgmt/Documents/IT%20Standards/IT%20Security/DOI%20Security%20Control%20Standards%20(based%20on%20NIST%20SP%20800-53%20Revision%203)/Access%20Control%20v1.4.pdf https://portal.doi.net/CIO/ITPMgmt/Documents/IT%20Standards/IT%20Security/DOI%20Security%20Control%20Standards%20(based%20on%20NIST%20SP%20800-53%20Revision%203)/Access%20Control%20v1.4.pdf https://portal.doi.net/CIO/ITPMgmt/Documents/IT%20Standards/IT%20Security/DOI%20Security%20Control%20Standards%20(based%20on%20NIST%20SP%20800-53%20Revision%203)/Access%20Control%20v1.4.pdf

COTS

Hardware or Software

Development or Maintenance of Custom Applications

Outsourced IT Services or On-site Support

Requirements herein are incorporated as part the Statement of Work/ Performance Work Statement:

Contractor may have access under this contract will be conducted by the Government or another of its contractors.

16 N/A ☐ ☐ Logon Banner. Contractor employees who access DOI information systems must acknowledge a government-approved legal warning banner prior to logging on to the system. This includes contractor owned information systems hosting DOI data.

17 N/A ☐ ☐ Security Controls.

The Contractor shall perform in accordance with contract clause “Security Requirements:

Facility Access and Information Technology”

– The Contractor shall ensure compliance with the security control requirements of the current version of NIST SP 800-53, Rev.1, which are applicable to the security categorization of the data or system. FIPS 199 and the NIST SP 800-60 will be used to determine information types and security categorizations.

18 N/A N/A ☐ Contingency Plan.

The Contractor shall perform in accordance with contract clause “Security Requirements:

Facility Access and Information Technology.”

For IT Support Services: The Contractor shall submit a contingency plan in accordance with NIST SP 800-34 and DOI IT Systems Contingency Plan Guide.

ICT Accessibility Requirements Statement per the Revised Section 508 of the Rehabilitation Act

Histology Storing Filing System

E201 Application

E201.1 Scope. ICT that is procured, developed, maintained, or used by agencies shall conform to the Revised 508 Standards.

E205 Electronic Content

E205.1 General. Electronic content shall comply with E205.

E205.2 Public Facing. Electronic content that is public facing shall conform to the accessibility requirements specified in E205.4.

E205.3 Agency Official Communication. Electronic content that is not public facing shall conform to the accessibility requirements specified in E205.4 when such content constitutes official business and is communicated by an agency through one or more of the following:

● A. An emergency notification;

● B. An initial or final decision adjudicating an administrative claim or proceeding;

● C. An internal or external program or policy announcement;

● D. A notice of benefits, program eligibility, employment opportunity, or personnel action;

● E. A formal acknowledgement of receipt;

● F. A survey questionnaire;

● G. A template or form;

● H. Educational or training materials; or

● I. Intranet content designed as a Web page.

E205.4 Accessibility Standard (WCAG 2.0). Electronic content shall conform to Level A and Level AA Success Criteria and Conformance Requirements in WCAG 2.0 (Incorporated by reference, see 702.10.1).

E205.4.1 Word Substitution when Applying WCAG to Non-Web Documents. For non-Web documents, wherever the term "Web page" or "page" appears in WCAG 2.0 Level A and AA Success Criteria and Conformance Requirements, the term "document" shall be substituted for the terms "Web page" and "page". In addition, in Success Criterion in 1.4.2, the phrase "in a document" shall be substituted for the phrase "on a Web page".

E206 Hardware

E206.1 General. Where components of ICT are hardware and transmit information or have a user interface, such components shall conform to the requirements in Chapter 4.

E207 Software

E207.1 General. Where components of ICT are software and transmit information or have a user interface, such components shall conform to E207 and the requirements in Chapter 5

Exception from E207.1 General: Software that is assistive technology and that supports the accessibility services of the platform shall not be required to conform to the requirements in Chapter 5.

E207.2 WCAG Conformance. User interface components, as well as the content of platforms and applications, shall conform to Level A and Level AA Success Criteria and Conformance Requirements in WCAG 2.0 (incorporated by reference, see 702.10.1).

Exceptions from E207.2 WCAG Conformance:

● Software that is assistive technology and that supports the accessibility services of the platform shall not be required to conform to E207.2.

● Non-web software shall not be required to conform to the following four Success Criteria in WCAG 2.0:

2.4.1 Bypass Blocks; 2.4.5 Multiple Ways; 3.2.3 Consistent Navigation; and 3.2.4 Consistent Identification.

● Non-Web software shall not be required to conform to Conformance Requirement 3 Complete Processes in WCAG 2.0.

E207.3 Complete Process for Non-Web Software Where non-Web software requires multiple steps to accomplish an activity, all software related to the activity to be accomplished shall conform to WCAG 2.0 as specified in E207.2.

E208 Support Documentation and Services

E208.1 General. Where an agency provides support documentation or services for ICT, such documentation and services shall conform to the requirements in Chapter 6.

E301 General

E301.1 Scope. The requirements of Chapter 3 shall apply to ICT where required by 508 Chapter 2 (Scoping Requirements), 255 Chapter 2 (Scoping Requirements), and where otherwise referenced in any other chapter of the Revised 508 Standards or Revised 255 Guidelines.

E302 Functional Performance Criteria

302.1 Without Vision. Where a visual mode of operation is provided, ICT shall provide at least one mode of operation that does not require user vision.

302.2 With Limited Vision. Where a visual mode of operation is provided, ICT shall provide at least one mode of operation that enables users to make use of limited vision.

302.3 Without Perception of Color. Where a visual mode of operation is provided, ICT shall provide at least one visual mode of operation that does not require user perception of color.

302.4 Without Hearing. Where an audible mode of operation is provided, ICT shall provide at least one mode of operation that does not require user hearing.

302.5 With Limited Hearing. Where an audible mode of operation is provided, ICT shall provide at least one mode of operation that enables users to make use of limited hearing.

302.6 Without Speech. Where speech is used for input, control, or operation, ICT shall provide at least one mode of operation that does not require user speech.

302.7 With Limited Manipulation. Where a manual mode of operation is provided, ICT shall provide at least one mode of operation that does not require fine motor control or simultaneous manual operations.

302.8 With Limited Reach and Strength. Where a manual mode of operation is provided, ICT shall provide at least one mode of operation that is operable with limited reach and limited strength.

302.9 With Limited Language, Cognitive, and Learning Abilities. ICT shall provide features making its use by individuals with limited cognitive, language, and learning abilities simpler and easier.

502 Interoperability with Assistive Technology

502.4 Platform Accessibility Features. Platforms and platform software shall conform to the requirements in ANSI/HFES 200.2, Human Factors Engineering of Software User Interfaces — Part 2: Accessibility (2008) (incorporated by reference, see 702.4.1) listed below:

● A. Section 9.3.3 Enable sequential entry of multiple (chorded) keystrokes;

● B. Section 9.3.4 Provide adjustment of delay before key acceptance;

● C. Section 9.3.5 Provide adjustment of same-key double-strike acceptance;

● D. Section 10.6.7 Allow users to choose visual alternative for audio output;

● E. Section 10.6.8 Synchronize audio equivalents for visual events;

● F. Section 10.6.9 Provide speech output services; and

● G. Section 10.7.1 Display any captions provided.

503 Applications

503.1 General. Applications shall conform to 503.

503.2 User Preferences. Applications shall permit user preferences from platform settings for color, contrast, font type, font size, and focus cursor.

Exception from E503.2 User Preferences: Applications that are designed to be isolated from their underlying platform software, including Web applications, shall not be required to conform to 503.2.

503.3 Alternative User Interfaces. Where an application provides an alternative user interface that functions as assistive technology, the application shall use platform and other industry standard accessibility services.

503.4 User Controls for Captions and Audio Description Where ICT displays video with synchronized audio, ICT shall provide user controls for closed captions and audio descriptions conforming to 503.4.

503.4.1 Caption Controls Where user controls are provided for volume adjustment, ICT shall provide user controls for the selection of captions at the same menu level as the user controls for volume or program selection.

503.4.2 Audio Description Controls. Where user controls are provided for program selection, ICT shall provide user controls for the selection of audio descriptions at the same menu level as the user controls for volume or program selection.

504 Authoring Tools

504.2 Content Creation or Editing Authoring tools shall provide a mode of operation to create or edit content that conforms to Level A and Level AA Success Criteria and Conformance Requirements in WCAG 2.0 (incorporated by reference, see 702.10.1) for all supported features and, as applicable, to file formats supported by the authoring tool. Authoring tools shall permit authors the option of overriding information required for accessibility.

504.2.1 Preservation of Information Provided for Accessibility in Format Conversion. Authoring tools shall, when converting content from one format to another or saving content in multiple formats, preserve the information required for accessibility to the extent that the information is supported by the destination format.

504.2.2 PDF Export. Authoring tools capable of exporting PDF files that conform to ISO 32000-1:2008 (PDF 1.7) shall also be capable of exporting PDF files that conform to ANSI/AIIM/ISO 14289-1:2016 (PDF/UA-1) (incorporated by reference, see 702.3.1).

504.3 Prompts. Authoring tools shall provide a mode of operation that prompts authors to create content that conforms to Level A and Level AA Success Criteria and Conformance Requirements in WCAG 2.0 (incorporated by reference, see 702.10.1) for supported features and, as applicable, to file formats supported by the authoring tool.

504.4 Templates. Where templates are provided, templates allowing content creation that conforms to Level A and Level AA Success Criteria and Conformance Requirements in WCAG 2.0 (incorporated by reference, see 702.10.1) shall be provided for a range of template uses for supported features and, as applicable, to file formats supported by the authoring tool.

INTERNET PROTOCOL INTERNET PROTOCOL version 6 (June 2012)

1. Any system hardware, software, firmware and/or networked component (voice, video or data) developed, procured, or acquired in support and/or performance of this contract shall be capable of transmitting, receiving, processing, forwarding and storing digital information across system boundaries utilizing system packets that are formatted in accordance with commercial standards of Internet Protocol (IP) version 6 (IPv6) as set forth in the USGv6 Profile (NIST Special Publication 500-267) and corresponding declarations of conformance defined in the USGv6 Test Program. In addition, this system shall maintain interoperability with IPv4 systems and provide at least the same level of performance and reliability capabilities of IPv4 products.

2. Specifically, any new IP product or system developed, acquired, or produced must:

a. Interoperate with both IPv6 and IPv4 systems and products, and

b. Have available contractor/vendor IPv6 technical support for development and implementation and fielded product management.

3. As IPv6 evolves, the Contractor commits to upgrading or providing an appropriate migration path for each item developed, delivered or utilized at no additional cost to 'the Government. The Contractor shall retrofit all non-IPv6 capable equipment, as defined above, that is fielded under this contract with IPv6 capable equipment, at no additional cost to the Government.

4. The contractor shall provide technical support for both IPv4 and IPv6.

5. Any system or software must be able to operate on networks supporting IPv4, IPv6 or one that supports both.

6. Any product whose non-compliance is discovered and made known to the Contractor within one year after acceptance shall be upgraded, modified or replaced to bring it into compliance at no additional cost to the Government.

GS0199 Prevention of Malicious Code (JUN 2018)

(a) Definitions

Malicious code is a computer code developed for the purpose of causing some form of intentional damage to computer systems or networks. Malicious code may be a complete program or code imbedded in software programs that appear to provide useful functions. The term includes computer viruses and other destructive programs, such as "Trojan Horses" and network "worms."

(b) The contractor must have in place an anti-virus procedure to ensure that media supplied is uncontaminated by malicious code.

(c) The contractor is required to scan all delivered software to insure it is free of malicious code prior to its installation or operation on USGS-owned computers or contractor-owned computers connected to USGS computer systems or networks. Contractors using diagnostics software disks or connecting to a non-USGS computer while performing repairs or upgrades to a USGS computer will scan the serviced computer's drive(s) to insure they are free of malicious code upon completion of the service call, or prior to return of serviced equipment, if servicing is performed off-site.

GS0231 Technical Liaison – Technical Clarification (DEC 2024)

a) The performance required herein shall be subject to the technical clarification of the Technical Liaison (TL) as identified below. As used herein, "technical clarification" is defined as communication to help the contractor fully understand the requirements.

(b) The Technical Liaison is not delegated any Contracting Officer’s Representative responsibilities.

(c) The Technical Liaison may not modify the requirements in any way. All modifications must be authorized by the Contracting Officer.

(d) The contractor shall immediately notify the Contracting Officer, in writing, if they believe the Technical Liaison is directing work outside the requirements of this contract. The contractor may not be reimbursed for any work outside the requirements of this contract.

(e) The Technical Liaison assigned for this contract is: (The Technical Liaison will be added at the time of award) Telelphone: [xxx] Email: [xxx] U.S. Geological Survey Address and Mail Stop: [xxx]

(f) Only the Contracting Officer may designate a new Technical Liaison.

GS0919 Legal Holidays (JUN 2021)

The following legal holidays are observed by this Government agency:

New Year's Day January 01 Martin Luther King's Birthday 3rd Monday in January Presidents Day 3rd Monday in February Memorial Day Last Monday in May Juneteenth National Independence Day June 19 Independence Day July 04 Labor Day 1st Monday in September Columbus Day 2nd Monday in October Veterans Day November 11 Thanksgiving Day 4th Thursday in November Christmas Day December 25

When a holiday falls on Saturday or Sunday, it is observed on the adjacent Friday or Monday, respectively.

In addition to the holidays listed above, the contractor agrees to observe leave days or closures designated by Federal Statute, Executive Order, or Presidential Proclamation.

GS1131 Unilateral Deobligation of Unexpended Funds (MAY 2013)

The contractor shall submit all invoices under the award no later than 90 calendar days after the period of performance has expired, unless a request for extension has been submitted to the Contracting Officer. After 120 days has passed since the expiration of the performance period, the government reserves the right to issue a unilateral modification deobligating any unexpended funds, and to initiate closeout procedures.

GS1376 Software Licensing Agreements JUL 2001

The only individual authorized to sign software licensing agreements on behalf of the Government is the contracting officer. Any commercial software licenses signed by the Government are subordinate to the terms of the contract. This is in accordance with FAR Clause 52.232-39 - Unenforceability of Unauthorized Obligations which is incorporated by reference herein.

52.212-4 Contract Terms and Conditions - Commercial Products and Commercial Services. (NOV 2023) (Deviation MAR 2026)

(a) Definitions. The clause at Federal Acquisition Regulation (FAR) 52.202-1, Definitions, is incorporated by reference.

(b) Inspection/Acceptance. The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. If repair/replacement or reperformance will not correct the defects or is not possible, the Government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its post acceptance rights—

(1) Within a reasonable time after the defect was discovered or should have been discovered; and

(2) Before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

(c) Assignment. The Contractor or its assignee may assign its rights to receive payment due as a result of performance of this contract to a bank, trust company, or other financing institution, including any Federal lending agency in accordance with the Assignment of Claims Act (31 U.S.C. 3727). However, when a third party makes payment (e.g., use of the Governmentwide commercial purchase card), the Contractor may not assign its rights to receive payment under this contract.

(d) Changes. Changes in the terms and conditions of this contract may be made only by written agreement of the parties.

(e) Disputes. This contract is subject to 41 U.S.C. chapter 71, Contract Disputes. Failure of the parties to this contract to reach agreement on any request for equitable adjustment, claim, appeal, or action arising under or relating to this contract shall be a dispute to be resolved in accordance with the clause FAR 52.233-1, Disputes, which is incorporated in this contract by reference. The Contractor shall proceed diligently with performance of this contract, pending final resolution of any dispute arising under the contract.

(f) Excusable delays. The Contractor shall be liable for default unless nonperformance is caused by an occurrence beyond the reasonable control of the Contractor and without its fault or negligence. Examples of occurrences include acts of God or the public enemy, acts of the Government in either its sovereign or contractual capacity, fires, floods, epidemics, quarantine restrictions, strikes, unusually severe weather, and delays of common carriers.

When an excusable delay occurs, the Contractor shall—

(1) Notify the Contracting Officer in writing as soon as possible;

(2) Remedy the delay as quickly as possible; and

(3) Notify the Contracting Officer when the occurrence is over.

(g) Invoice. The Government will handle invoices according to the Prompt Payment Act (31 U.S.C. 3903) and 5 CFR part 1315. The Contractor shall submit invoices to the address designated in the contract to receive invoices.

An invoice must include the information required by 5 CFR part 1315.9(b).

(h) Patent indemnity. The Contractor shall indemnify the Government and its officers, employees, and agents against liability, including costs, for actual or alleged direct or contributory infringement of, or inducement to infringe, any United States or foreign patent, trademark, or copyright, arising out of the performance of this contract, provided the Contractor is reasonably notified of such claims and proceedings.

(i) Payment—

(1) Items accepted. Payment shall be made for items accepted by the Government that have been delivered to the delivery destinations set forth in this contract.

(2) Prompt payment. The Government will make payment in accordance with the Prompt Payment Act (31 U.S.C.

3903) and prompt payment regulations at 5 CFR part 1315.

(3) Discount. In connection with any discount offered for early payment, time shall be computed from the date of the invoice. For the purpose of computing the discount earned, payment shall be considered to have been made on the date that appears on the payment check or the specified payment date if an electronic funds transfer payment is made.

(4) Overpayments. If the Contractor becomes aware of a duplicate contract financing or invoice payment or that the Government has otherwise overpaid on a contract financing or invoice payment, the Contractor shall—

(i) Remit the overpayment amount to the payment office cited in the contract along with a description of the overpayment including the—

(A) Circumstances of the overpayment (e.g., duplicate payment, erroneous payment, liquidation errors, date(s) of overpayment);

(B) Affected contract number and delivery order number, if applicable;

(C) Affected line item or subline item, if applicable;

(D) Contractor point of contact; and

(ii) Provide a copy of the remittance and supporting documentation to the Contracting Officer.

(5) Interest.(i) All amounts that become payable by the Contractor to the Government under this contract shall bear simple interest from the date due until paid unless paid within 30 days of becoming due. The interest rate shall be the interest rate established by the Secretary of the Treasury as provided in 41 U.S.C. 7109, which is applicable to the period in which the amount becomes due, as provided in (i)(6)(v) of this clause, and then at the rate applicable for each six-month period as fixed by the Secretary until the amount is paid.

(ii) The Government may issue a demand for payment to the Contractor upon…