REQUEST FOR QUOTATION

(THIS IS NOT AN ORDER)

THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

15. DATE OF QUOTATION

16. SIGNER

a. NAME (Type or print)

c. TITLE (Type or print)

b. TELEPHONE

AREA CODE

NUMBER

STANDARD FORM 18 (REV. 6/1995)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not usable

8. TO:

b. COMPANYa. NAME

c. STREET ADDRESS

d. CITY e. STATE f. ZIP CODE

9. DESTINATION

a. NAME OF CONSIGNEE

b. STREET ADDRESS

d. STATE e. ZIP CODE

7. DELIVERY

FOB DESTINATION

OTHER

(See Schedule)

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5a ON OR BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5a. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or service. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotation must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State and local taxes)

ITEM NUMBER

(a)

SUPPLIES/SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e)

AMOUNT

(f)

12. DISCOUNT FOR PROMPT PAYMENT

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%) d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

b. STREET ADDRESS

c. COUNTY

d. CITY e. STATE f. ZIP CODE

14. SIGNATURE OF PERSON AUTHORIZED TO

SIGN QUOTATION

PAGE OF PAGES

1. REQUEST NUMBER 2. DATE ISSUED 3. REQUISITION/PURCHASE REQUEST NUMBER 4. CERT. FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

RATING

5a. ISSUED BY 6. DELIVER BY (Date)

NAME TELEPHONE NUMBER

AREA CODE NUMBER

c. CITY

5b. FOR INFORMATION CALL (NO COLLECT CALLS)

MS 973

Box 25046 Denver Federal Center

USGS OAG DENVER ACQUISITION BRANCH

PO BOX 25046

204 DENVER FEDERAL CENTER

DENVER CO 80225-0046

0044039415140G0226Q0045

Lisa Williams

236-9327 USGS Mineral & Environmental Res.

80225

06/11/2026

06/22/2026 1430 MD

Multiple

Denver

CO

Oxford Instruments Ultim Infinity 170 or equal for The United States Geological

Survey (USGS), Geology, Geophysics, and

Geochemistry Science Center in Denver, CO, supporting the Energy and Minerals

Mission Area.

1. This is a Solicitation issued as a

Request for Quotations (RFQ). Submit written quotations on RFQ Number

140G0226Q0045. This solicitation will utilize FAR Overhaul Part 12, Acquisition of Commercial Products and

Commercial Services, using streamlined evaluation and award procedures.

Continued...

1 44

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGES

NAME OF OFFEROR OR CONTRACTOR

SUPPLIES/SERVICES

(B)

UNIT

(D)

UNIT PRICE

(E)

AMOUNT

(F)

OPTIONAL FORM 336 (4-86)

Sponsored by GSA FAR (48 CFR) 53.110

ITEM NO.

(A)

QUANTITY

(C)

NSN 7540-01-152-8067

140G0226Q0045

2. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC)

2026-01 and the FAR Overhaul deviations.

3. The solicitation is NOT a Small Business

Set-Aside. The North American Industry

Classification System (NAICS) code is 334516

(Analytical Laboratory Instrument

Manufacturing) and the size standard is 1,000 employees.

4. In accordance with FAR Provision 52.204-7

System for Award Management. (NOV 2024)

(Deviation MAR 2026), Vendors shall have an active Federal Government contracts registration in the System for Award Management

(SAM) when submitting an offer or quotation in response to this solicitation and at the time of award. To register in SAM, go to https://www.sam.gov. Allow for processing time when registering in SAM. If the Offeror is not registered in SAM, it should register immediately after receiving this solicitation.

5. Please download attached Solicitation

140G0226Q0045 for all Clauses and Provisions provided in this announcement.

00010 1 EAOxford Instruments Ultim Infinity 170 or equal for The United States Geological Survey (USGS), Geology, Geophysics, and Geochemistry Science

Center in Denver, CO, supporting the Energy and

Minerals Mission Area in accordance with the attached Terms and Conditions contained herein.

THE GOVERNMENT'S TERMS AND CONDITIONS SHALL

PREVAIL OVER ANY OTHER TERMS AND CONDITIONS

AND/OR AGREEMENT (IF ANY).

Anticipated Award Type: Firm-fixed-price

Delivery: 180 Days After Receipt of Order

00020 Installation Services for Oxford Instruments

Ultim Infinity 170 or equal in accordance with

Continued...

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGES

NAME OF OFFEROR OR CONTRACTOR

SUPPLIES/SERVICES

(B)

UNIT

(D)

UNIT PRICE

(E)

AMOUNT

(F)

OPTIONAL FORM 336 (4-86)

Sponsored by GSA FAR (48 CFR) 53.110

ITEM NO.

(A)

QUANTITY

(C)

NSN 7540-01-152-8067

140G0226Q0045 the attached Terms and Conditions contained herein.

THE GOVERNMENT'S TERMS AND CONDITIONS SHALL

PREVAIL OVER ANY OTHER TERMS AND CONDITIONS

AND/OR AGREEMENT (IF ANY).

The Period of Performance is estimated and will commence on the date of award.

Anticipated Award Type: Firm-fixed-price

Period of Performance: 08/03/2026 to

04/30/2027

RFQ 140G0226Q0045

Table of Contents

Brand Name or Equal Products DOI ELECTRONIC INVOICING Electronic Invoicing and Payment Requirements - Invoice Processing Platform (IPP) (February 2021) FISMA Information Technology Security Requirements Summary ICT Accessibility Requirements Statement per the Revised Section 508 of the Rehabilitation Act INTERNET PROTOCOL INTERNET PROTOCOL version 6 (June 2012) GS0199 Prevention of Malicious Code (JUN 2018) GS0231 Technical Liaison – Technical Clarification (DEC 2024) GS0919 Legal Holidays (JUN 2021) GS1131 Unilateral Deobligation of Unexpended Funds (MAY 2013) GS1376 Software Licensing Agreements JUL 2001 52.212-4 Contract Terms and Conditions - Commercial Products and Commercial Services. (NOV 2023) (Deviation

MAR 2026)

52.222-90 Addressing DEI Discrimination by Federal Contractors (Deviation April 2026) 52.240-91 Security Prohibitions and Exclusions (Deviation MAR 2026) 52.252-2 Clauses Incorporated by Reference. (FEB 1998)

52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (NOV 2020)

GS2101 Inquiries (NOV 2020) GS2115 Independent Review of Protests to the Agency (MAY 2024) 52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law. (FEB 2016) (Deviation MAY 2026) 52.212-1 Instructions to Offerors—Commercial Products and Commercial Services (SEPT 2023) (Deviation MAR 2026) 52.216-1 Type of Contract. (APR 1984) 52.219-1 Small Business Program Representations. (FEB 2024) (Deviation JAN 2026) 52.225-2 Buy American Certificate. (OCT 2022) 52.233-2 Service of Protest Department of the Interior (SEPT 2006) (Deviation)

52.240.90 Security Prohibitions and Exclusions Representations and Certifications (RFO DEVIATION MAR 2026).

Evaluation of Equal Products Basis for Award Quotation Submission Instructions to Vendors Questions – Cutoff Electronic Submission of Quotations – Required 52.252-1 Solicitation Provisions Incorporated by Reference. (FEB 1998) 52.252-5 Authorized Deviations in Provisions (Nov 2020)

Clauses:

Brand Name or Equal Products

A. Introduction:

The United States Geological Survey (USGS), Geology, Geophysics, and Geochemistry Science Center in Denver, CO, supporting the Energy and Minerals Mission Area, requires a new Energy Dispersive Spectrometer (EDS). The required instrument is Oxford Instruments Ultim Infinity 170 or equal.

B. Background:

The Denver Microbeam Laboratory in the Geology, Geophysics, and Geochemistry Science Center houses multiple microanalytical instruments used to study critical minerals and energy resources and to support geologic mapping.

The energy dispersive spectrometer (EDS) enables in situ chemical analysis at the micrometer scale. The imaging and analytical capability provided by the EDS allows the laboratory to determine the deportment of critical minerals in emerging resources, study fluid chemistry changes associated with ore deposit formation, and assess the paragenesis and relationships of accessory minerals used in geochronology. This laboratory work is an essential first step that informs subsequent downstream scientific analyses.

C. Brand Name Manufacturer:

Oxford Instruments America, Inc.

https://www.oxinst.com/

D. Salient Characteristics for an Energy Dispersive Detector (Brand Name or Equal):

The following salient characteristics define the minimum essential requirements. Any offered “equal” product must meet or exceed these requirements to be considered technically acceptable.

1. Physical Characteristics:

a. Sensor size must be greater than or equal to 150 mm².

b. Must attach to the existing FEI 450 Quanta FESEM rear EDS port using a vendor-supplied flange.

c. Must include a motorized detector capable of digital control through software, allowing full insertion and retraction of the detector.

d. Detector must have a thin window capable of enabling beryllium (Be) detection.

e. Detector must include an integrated Peltier cooling system.

2. Functional Characteristics:

a. Detector must be capable of detecting elements from Be through U.

b. Detector must be compatible with Oxford E1 and X4 control boxes and integrate seamlessly with existing Oxford Unity and C-Nano detector hardware.

c. Detector and its operational software must support automated workflows for collection of large-area datasets and incorporate data captured simultaneously from existing Unity and C-Nano detectors.

d. Software must store full EDS data cubes for individual fields and stitched large-area maps, and permit post-acquisition extraction of user-defined regions.

e. Software must provide a rigorous quantification routine allowing both user-supplied standards and factory-provided standard sets.

f. Software must provide phase analysis capability.

g. Detector hardware and software must include pulse pile-up suppression and correction.

3. Performance Characteristics:

a. The detector must be individually factory-characterized such that the displayed output matches the calculated spectrum with no peak shifts or missing data.

b. Detector resolution at C Kα must be less than or equal to 50 eV at 50,000 counts per second (cps) throughput.

c. Detector resolution at Mn Kα must be less than or equal to 130 eV at 200,000 cps throughput.

d. Detector resolution must not drift more than 2 eV across a throughput range of 1,000 to 100,000 cps.

e. Detector must be capable of achieving 1,000,000 cps in the total spectrum with no observable detector artifacts, including pulse pile-up peaks.

E. Requirements – Warranty, Shipping, Delivery, and Installation:

E.1 Warranty

A minimum one‑year standard manufacturer’s warranty covering all hardware and software is required.

Documentation describing the manufacturer’s warranty shall be provided. The warranty period shall begin at the time of final acceptance of the instrument, after onsite demonstration that all specifications in this document are met.

E.2 Shipping:

The instrument and all components shall be shipped FOB Destination. All shipping costs shall be included.

E.3 Delivery Address:

The instrument and all associated components shall be delivered FOB Destination within one hundred eighty (180) days after receipt of award to the following address:

USGS

Building 20, Lab G1520A Denver Federal Center Denver, CO

E.4 Installation:

Installation, calibration, and testing of all equipment shall be performed by a factory-trained and certified engineer, including onsite verification of all factory-determined analytical specifications. A copy of the factory test results shall be provided for comparison with the onsite verification.

Installation, calibration, and testing must be completed within ninety (90) days of delivery. Installation will occur at the following location:

USGS

Building 20, Lab G1515 Denver Federal Center Denver, CO

(End of Brand Name or Salient Characteristics/Requirements)

DOI ELECTRONIC INVOICING Electronic Invoicing and Payment Requirements - Invoice Processing Platform (IPP) (February 2021)

Payment requests must be submitted electronically through the U. S. Department of the Treasury's Invoice Processing Platform System (IPP).

"Payment request" means any request for contract financing payment or invoice payment by the Contractor. To constitute a proper invoice, the payment request must comply with the requirements identified in the applicable Prompt Payment clause included in the contract, or the clause 52.212-4 Contract Terms and Conditions - Commercial Items included in commercial item contracts. The IPP website address is: https://www.ipp.gov.

Under this contract, the following documents are required to be submitted as an attachment to the IPP invoice: A copy of the Contractor’s internally generated invoice.

The Contractor must use the IPP website to register access and use IPP for submitting requests for payment. The Contractor Government Business Point of Contact (as listed in SAM) will receive enrollment instructions via email from the Federal Reserve Bank of St. Louis (FRBSTL) within 3 - 5 business days of the contract award date.

Contractor assistance with enrollment can be obtained by contacting the IPP Production Helpdesk via email IPPCustomerSupport@fiscal.treasury.gov or phone (866) 973-3131.

If the Contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the Contractor must submit a waiver request in writing to the Contracting Officer with its proposal or quotation.

FISMA Information Technology Security Requirements Summary

COTS

Hardware or Software

Development or Maintenance of Custom Applications

Outsourced IT Services or On-site Support

Requirements herein are incorporated as part the Statement of Work/ Performance Work Statement:

1 N/A ☐ ☐ Background Investigations. The Contractor shall perform in accordance with clause “Security Requirements: Facility Access and Information Technology.”

2 N/A ☐ ☐

Non-disclosure Agreement. Prior to receiving access to USGS computers, contractor employees shall be required to sign nondisclosure or other system security agreements, depending on the systems to be used and level of access granted.

Applies whenever any contractor employee has unsupervised access to a USGS system (even if only basic network, internet or email or will develop custom applications) such as:

• User Access to USGS IT Systems known to contain sensitive or proprietary data

• IT Support services (greater than user access)

• Development or Maintenance of Custom Applications

• On-site contractor support and management of IT system

• Off-site contractor Oversight and Management of IT System

COTS

Hardware or Software

Development or Maintenance of Custom Applications

Outsourced IT Services or On-site Support

Requirements herein are incorporated as part the Statement of Work/ Performance Work Statement:

Contractor will have access to Privacy Act System of Records – Work under this contract will involve design, development or operation of (access to) system(s) of records containing personal information protected by the Privacy Act (5 U.S.C.

Section 552a).

• IT Security Services Privacy Act System: [Identify covered system(s) to which the contractor may have access] Click or tap here to enter text.

Work to be performed: [Summarize nature of the contractor's use of such records, such as]

• User-level access to system containing protected records

• Operation or maintenance of Privacy Act System of records or computers hosting such system

• Design or modification of a Privacy Act system of records]

The contractor is not required or permitted to respond to requests for Privacy Act data or to make decisions about releases of data under the Act. Contractor shall ensure its employees are instructed to safeguard against improper use or release of such data and advise them that violation of the Act may involve criminal penalties. The contractor will comply with FAR clause 52.224-2, Privacy Act, incorporated herein by reference and with DOI Privacy Act regulations at 43 CFR 2, Subpart D

3 N/A ☐ ☐ Training. The Contractor shall perform in accordance with clause “Security Requirements:

Facility Access and Information Technology” - Contractor employees must successfully complete DOI’s end- user computer security awareness training prior to being granted access to DOI data or being issued a user account. Training must be renewed annually. Additionally, the contract employees must sign a Statement of Responsibility (SOR) that states they have read the appropriate Rules of Behavior and other applicable Information security policies.

4 N/A ☐ ☐ Personnel Changes. The Contractor shall perform in accordance with clause “Security Requirements: Facility Access and Information Technology” - The contractor must notify the COR immediately when an employee working on a DOI system is reassigned or leaves the contractor’s employ.

COTS

Hardware or Software

Development or Maintenance of Custom Applications

Outsourced IT Services or On-site Support

Requirements herein are incorporated as part the Statement of Work/ Performance Work Statement:

Applies whenever any contractor employee has unsupervised access to a USGS system (even if only basic network, internet or email or will develop custom applications) such as:

• User Access to USGS IT Systems known to contain sensitive or proprietary data

• IT Support services (greater than user access)

• Development or Maintenance of Custom Applications *

• On-site contractor support and management of IT system

• Off-site contractor Oversight and Management of IT System

• IT Security Services * *May not be applicable for off-site performance.

5 N/A ☐ ☐ Contractor Location. The Contractor shall perform in accordance with clause “Security Requirements: Facility Access and Information Technology.”

Applies whenever any contractor employee has unsupervised access to a USGS system (even if only basic network, internet or email or will develop custom applications) such as:

• User Access to USGS IT Systems known to contain sensitive or proprietary data

• IT Support services (greater than user access)

• Development or Maintenance of Custom Applications

• On-site contractor support and management of IT system

• Off-site contractor Oversight and Management of IT System

• IT Security Services

No portion of the services to be performed hereunder may be performed outside the United States without the express written permission of the Contracting Officer.

If services are proposed to be performed abroad, the Contractor shall provide an acceptable security plan that addresses mitigation of problems related to communication, control, and protecting the confidentiality, integrity, and availability of IT systems and information.

COTS

Hardware or Software

Development or Maintenance of Custom Applications

Outsourced IT Services or On-site Support

Requirements herein are incorporated as part the Statement of Work/ Performance Work Statement:

A Security Plan Template is available upon request from the Contracting Officer.

6 N/A ☐ N/A Applicable Standards. The Contractor shall perform in accordance with clause “Security Requirements: Facility Access and Information Technology” - Contractor must follow the DOI System Development Life Cycle (SDLC), NIST SP 800-64 and the DOI SDLC Security Integration Guide.

7 N/A ☐ ☐ Asset Valuation-Security Categorization:

The Contractor shall perform in accordance with clause “Security Requirements: Facility Access and Information Technology.”

☐User Access to USGS IT Systems - The Government is responsible for security categorization on USGS systems to which the Contractor may have access under this contract.

☐IT Support Services greater than User- Level Services Choose One:

☐The Government is responsible for security categorization on USGS systems to which the Contractor may have access under this contract.

☐The Government has defined the [insert name of system to be developed, operated or maintained by the contractor] to be a [Major Application], [Minor Application] or [General support system] as defined in OMB Circular A- 130, Appendix III and NIST SP800-53.

The following risk and sensitivity levels have been assigned based on the FIPS 199 and the NIST SP 800-60.

Mission impact: Click or tap here to enter text.

Data sensitivity:Click or tap here to enter text.

Risk Level:Click or tap here to enter text.

Bureau/departmental/national criticality: Click or tap here to enter https://insight.usgs.gov/aei/offices/oa/oag/AOP/guidefordevelopingsecurityplans.pdf

COTS

Hardware or Software

Development or Maintenance of Custom Applications

Outsourced IT Services or On-site Support

Requirements herein are incorporated as part the Statement of Work/ Performance Work Statement:

text.

☐Off-Site Oversight and Management of IT System- The Contractor shall use the FIPS 199 and the NIST SP 800- 60 to determine information types and security categorization based on mission impact, data sensitivity, risk level, and bureau / departmental / national criticality for Contractor-owned and operated systems used to provide services under this contract. Solicitations must include either the complete publication or a reference to public facilities, such as a website or office, where it may be accessed.

☐IT Security Services - Applies only if the purpose of the contract includes obtaining asset valuation services. The Contractor shall use the FIPS 199 and the NIST SP 800- 60 to determine information types and security categorization based on mission impact, data sensitivity, risk level, and bureau / departmental / national criticality for Contractor-owned and operated systems used to provide services under this contract. Solicitations must include either the complete publication or a reference to public facilities, such as a website or office, where it may be accessed.

8 ☒ ☐ The Government shall be granted unlimited rights in software or data produced hereunder as described in FAR clause 52.227-17, Rights in Data— Special Works, incorporated by reference herein.

Select either COTS or custom software language as applicable. If both apply, identify software/data deliverables governed by each clause.

Property Rights.

1. For Federal Supply Schedule orders or orders under an existing contract, rights to software acquired hereunder are set forth in the basic contract.

2. For open market contracts, the Government's rights in software delivered hereunder shall be as described in software developer's commercial software license agreement or the clause FAR 52.227-19, Commercial Computer Software- Restricted Rights, whichever is greater.

COTS

Hardware or Software

Development or Maintenance of Custom Applications

Outsourced IT Services or On-site Support

Requirements herein are incorporated as part the Statement of Work/ Performance Work Statement:

9 N/A ☐ ☐ Independent Verification and Validation (IV&V). The Government is responsible for independent software verification and validation prior to being moved into production.

On-Site Contractor Support and Management of IT System Choose One:

☐Software will be independently verified and validated by the Government or another selected contractor prior to being moved into production.

☐Contractor will ensure that independent verification and validation is performed on software deployed on contractor managed systems containing USGS data, in accordance with DOI SDLC Security Integration Guide

☐Off-Site Contractor Operation and Management of IT System Contractor will ensure that independent verification and validation is performed on software deployed on contractor managed systems containing USGS data, in accordance with DOI SDLC Security Integration Guide

☐IT Security Service - Applies only if the purpose of the contract includes obtaining IV&V services.

10 N/A ☐ Applies if the purpose of the contract includes obtaining C&A services.

☐ Certification & Accreditation.

☐User Access to USGS IT Systems or IT Supports Services (Greater than User Access) Certification and Accreditation on USGS systems to which the Contractor may have access under this contract will be conducted by the Government or another of its contractors.

COTS

Hardware or Software

Development or Maintenance of Custom Applications

Outsourced IT Services or On-site Support

Requirements herein are incorporated as part the Statement of Work/ Performance Work Statement:

☐Development or Maintenance of Custom Applications The contractor will perform Certification and Accreditation (C&A) services on the application developed or maintained hereunder prior to going into production. The application must be re-accredited every three years or whenever there is a major change that affects security. C&A documents will be provided to the COR in both hard copy and electronic forms. The contractor must follow NIST SP 800-37, 800-18, 800-30, 800-60, 800-53A, Federal Information Processing Standard (FIPS) 199 and 200, the associated DOI guides/templates, the DOI Security Test & Evaluation (ST&E) Guide, and the DOI Privacy Impact Assessment. NIST documents are available on the internet at http://csrc.nist.gov/publications/nistpubs/ FIPS documents are available on the internet at http://csrc.nist.gov/publications/nistpubs/. The contractor may request copies of DOI documents by contacting the Contracting Officer. The government reserves the right to conduct the ST&E using either Government personnel or an independent contractor. The contractor will take immediate and timely action to correct or mitigate any weaknesses discovered as necessary to bring the application or system into compliance with the above requirement.

☐On-Site Contractor Support and Management of IT System or Off-Site Contractor Operation and Management of IT System The Contractor must maintain systems that are compliant with NIST SP 800-18, 800-30, 800-37, 800-53A, 800-60, Federal Information Processing Standard (FIPS) 199 and 200, the associated DOI guides/templates, the DOI Security Test & Evaluation (ST&E) Guide, and the DOI Privacy Impact Assessment. As required by the above, Major Applications and General Support Systems shall be certified and accredited (C&A) prior to going into production and re-accredited every three years or whenever there is a major change that affects security. C&A documents will be provided to the COR in both hard copy and electronic forms. NIST documents are available on the internet at http://csrc.nist.gov/publications/nistpubs/. The contractor may request copies of DOI documents http://csrc.nist.gov/publications/nistpubs/ http://csrc.nist.gov/publications/nistpubs/ http://csrc.nist.gov/publications/nistpubs/

COTS

Hardware or Software

Development or Maintenance of Custom Applications

Outsourced IT Services or On-site Support

Requirements herein are incorporated as part the Statement of Work/ Performance Work Statement:

by contacting the Contracting Officer. The government will reserve the right to conduct the ST&E, using either Government personnel or an independent contractor. The contractor will take immediate and timely action to correct or mitigate any weaknesses discovered as necessary to bring the application or system into compliance with the above requirement.

11 N/A for COTS HW & SW, User Access to USGS IT Systems (other than IT services), IT Support Services (User Level or greater access)

N/A ☐ Internet Logon Banner. The Contractor shall perform in accordance with clause “Security Requirements: Facility Access and Information Technology.”

☐Develop or Maintenance of Custom Applications or Onsite Contractor Support and Management of IT System or Off-site Contractor Oversight and Management of IT System – Web based applications developed or maintained under this contract must contain a USGS approved logon Banner:

https://portal.doi.net/CIO/ITPMgmt/Documents/IT Standards/IT Security/DOI Security Control Standards (based on NIST SP 800-53 Revision 3)/Access Control v1.4.pdf

12 N/A ☐ ☐ Incident Reporting. The Contractor shall perform in accordance with contract clause “Security Requirements: Facility Access and Information Technology” - The contractor must report computer security incidents affecting DOI data or systems in accordance with the DOI Computer Incident Response Guide.

13 ☒ ☐ ☐ Quality Control. All software or hardware purchased must be free of malicious code such as viruses, Trojan horse programs, worms, spyware, etc. Validation of this must be written into the contract.

14 N/A N/A ☐ Self-Assessment. The Contractor shall perform in accordance with contract clause “Security Requirements: Facility Access and Information Technology” - The contractor must conduct an annual self-assessment in accordance with annual DOI guidance on all information systems in production.

15 N/A ☐ ☐ Vulnerability Analysis. Vulnerability Analysis on USGS systems to which the https://portal.doi.net/CIO/ITPMgmt/Documents/IT%20Standards/IT%20Security/DOI%20Security%20Control%20Standards%20(based%20on%20NIST%20SP%20800-53%20Revision%203)/Access%20Control%20v1.4.pdf https://portal.doi.net/CIO/ITPMgmt/Documents/IT%20Standards/IT%20Security/DOI%20Security%20Control%20Standards%20(based%20on%20NIST%20SP%20800-53%20Revision%203)/Access%20Control%20v1.4.pdf https://portal.doi.net/CIO/ITPMgmt/Documents/IT%20Standards/IT%20Security/DOI%20Security%20Control%20Standards%20(based%20on%20NIST%20SP%20800-53%20Revision%203)/Access%20Control%20v1.4.pdf https://portal.doi.net/CIO/ITPMgmt/Documents/IT%20Standards/IT%20Security/DOI%20Security%20Control%20Standards%20(based%20on%20NIST%20SP%20800-53%20Revision%203)/Access%20Control%20v1.4.pdf https://portal.doi.net/CIO/ITPMgmt/Documents/IT%20Standards/IT%20Security/DOI%20Security%20Control%20Standards%20(based%20on%20NIST%20SP%20800-53%20Revision%203)/Access%20Control%20v1.4.pdf

COTS

Hardware or Software

Development or Maintenance of Custom Applications

Outsourced IT Services or On-site Support

Requirements herein are incorporated as part the Statement of Work/ Performance Work Statement:

Contractor may have access under this contract will be conducted by the Government or another of its contractors.

16 N/A ☐ ☐ Logon Banner. Contractor employees who access DOI information systems must acknowledge a government-approved legal warning banner prior to logging on to the system. This includes contractor owned information systems hosting DOI data.

17 N/A ☐ ☐ Security Controls.

The Contractor shall perform in accordance with contract clause “Security Requirements:

Facility Access and Information Technology”

– The Contractor shall ensure compliance with the security control requirements of the current version of NIST SP 800-53, Rev.1, which are applicable to the security categorization of the data or system. FIPS 199 and the NIST SP 800-60 will be used to determine information types and security categorizations.

18 N/A N/A ☐ Contingency Plan.

The Contractor shall perform in accordance with contract clause “Security Requirements:

Facility Access and Information Technology.”

For IT Support Services: The Contractor shall submit a contingency plan in accordance with NIST SP 800-34 and DOI IT Systems Contingency Plan Guide.

ICT Accessibility Requirements Statement per the Revised Section 508 of the Rehabilitation Act

Section 508 of the Rehabilitation Act, as amended by the Workforce Investment Act of 1998 (P.L. 105-220) requires that when Federal agencies develop, procure, maintain, or use information and communication technology (ICT), it shall be accessible to people with disabilities. Federal employees and members of the public who have disabilities must have access to, and use of, information and data that is comparable to people without disabilities.

E206 Hardware

E206.1 General. Where components of ICT are hardware and transmit information or have a user interface, such components shall conform to the requirements in Chapter 4.

E207 Software

E207.1 General. Where components of ICT are software and transmit information or have a user interface, such components shall conform to E207 and the requirements in Chapter 5

Exception from E207.1 General: Software that is assistive technology and that supports the accessibility services of the platform shall not be required to conform to the requirements in Chapter 5.

E302 Functional Performance Criteria

302.1 Without Vision. Where a visual mode of operation is provided, ICT shall provide at least one mode of operation that does not require user vision.

302.2 With Limited Vision. Where a visual mode of operation is provided, ICT shall provide at least one mode of operation that enables users to make use of limited vision.

302.3 Without Perception of Color. Where a visual mode of operation is provided, ICT shall provide at least one visual mode of operation that does not require user perception of color.

302.4 Without Hearing. Where an audible mode of operation is provided, ICT shall provide at least one mode of operation that does not require user hearing.

302.5 With Limited Hearing. Where an audible mode of operation is provided, ICT shall provide at least one mode of operation that enables users to make use of limited hearing.

302.6 Without Speech. Where speech is used for input, control, or operation, ICT shall provide at least one mode of operation that does not require user speech.

302.7 With Limited Manipulation. Where a manual mode of operation is provided, ICT shall provide at least one mode of operation that does not require fine motor control or simultaneous manual operations.

302.8 With Limited Reach and Strength. Where a manual mode of operation is provided, ICT shall provide at least one mode of operation that is operable with limited reach and limited strength.

302.9 With Limited Language, Cognitive, and Learning Abilities. ICT shall provide features making its use by individuals with limited cognitive, language, and learning abilities simpler and easier.

INTERNET PROTOCOL INTERNET PROTOCOL version 6 (June 2012)

1. Any system hardware, software, firmware and/or networked component (voice, video or data) developed, procured, or acquired in support and/or performance of this contract shall be capable of transmitting, receiving, processing, forwarding and storing digital information across system boundaries utilizing system packets that are formatted in accordance with commercial standards of Internet Protocol (IP) version 6 (IPv6) as set forth in the USGv6 Profile (NIST Special Publication 500-267) and corresponding declarations of conformance defined in the USGv6 Test Program. In addition, this system shall maintain interoperability with IPv4 systems and provide at least the same level of performance and reliability capabilities of IPv4 products.

2. Specifically, any new IP product or system developed, acquired, or produced must:

a. Interoperate with both IPv6 and IPv4 systems and products, and

b. Have available contractor/vendor IPv6 technical support for development and implementation and fielded product management.

3. As IPv6 evolves, the Contractor commits to upgrading or providing an appropriate migration path for each item developed, delivered or utilized at no additional cost to 'the Government. The Contractor shall retrofit all non-IPv6 capable equipment, as defined above, that is fielded under this contract with IPv6 capable equipment, at no additional cost to the Government.

4. The contractor shall provide technical support for both IPv4 and IPv6.

5. Any system or software must be able to operate on networks supporting IPv4, IPv6 or one that supports both.

6. Any product whose non-compliance is discovered and made known to the Contractor within one year after acceptance shall be upgraded, modified or replaced to bring it into compliance at no additional cost to the Government.

GS0199 Prevention of Malicious Code (JUN 2018)

(a) Definitions

Malicious code is a computer code developed for the purpose of causing some form of intentional damage to computer systems or networks. Malicious code may be a complete program or code imbedded in software programs that appear to provide useful functions. The term includes computer viruses and other destructive programs, such as "Trojan Horses" and network "worms."

(b) The contractor must have in place an anti-virus procedure to ensure that media supplied is uncontaminated by malicious code.

(c) The contractor is required to scan all delivered software to insure it is free of malicious code prior to its installation or operation on USGS-owned computers or contractor-owned computers connected to USGS computer systems or networks. Contractors using diagnostics software disks or connecting to a non-USGS computer while performing repairs or upgrades to a USGS computer will scan the serviced computer's drive(s) to insure they are free of malicious code upon completion of the service call, or prior to return of serviced equipment, if servicing is performed off-site.

GS0231 Technical Liaison – Technical Clarification (DEC 2024)

a) The performance required herein shall be subject to the technical clarification of the Technical Liaison (TL) as identified below. As used herein, "technical clarification" is defined as communication to help the contractor fully understand the requirements.

(b) The Technical Liaison is not delegated any Contracting Officer’s Representative responsibilities.

(c) The Technical Liaison may not modify the requirements in any way. All modifications must be authorized by the Contracting Officer.

(d) The contractor shall immediately notify the Contracting Officer, in writing, if they believe the Technical Liaison is directing work outside the requirements of this contract. The contractor may not be reimbursed for any work outside the requirements of this contract.

(e) The Technical Liaison assigned for this contract is: (The Technical Liaison will be added at the time of award) Telelphone: [xxx] Email: [xxx] U.S. Geological Survey Address and Mail Stop: [xxx]

(f) Only the Contracting Officer may designate a new Technical Liaison.

GS0919 Legal Holidays (JUN 2021)

The following legal holidays are observed by this Government agency:

New Year's Day January 01 Martin Luther King's Birthday 3rd Monday in January Presidents Day 3rd Monday in February Memorial Day Last Monday in May Juneteenth National Independence Day June 19 Independence Day July 04 Labor Day 1st Monday in September Columbus Day 2nd Monday in October Veterans Day November 11 Thanksgiving Day 4th Thursday in November Christmas Day December 25

When a holiday falls on Saturday or Sunday, it is observed on the adjacent Friday or Monday, respectively.

In addition to the holidays listed above, the contractor agrees to observe leave days or closures designated by Federal Statute, Executive Order, or Presidential Proclamation.

GS1131 Unilateral Deobligation of Unexpended Funds (MAY 2013)

The contractor shall submit all invoices under the award no later than 90 calendar days after the period of performance has expired, unless a request for extension has been submitted to the Contracting Officer. After 120 days has passed since the expiration of the performance period, the government reserves the right to issue a unilateral modification deobligating any unexpended funds, and to initiate closeout procedures.

GS1376 Software Licensing Agreements JUL 2001

The only individual authorized to sign software licensing agreements on behalf of the Government is the contracting officer. Any commercial software licenses signed by the Government are subordinate to the terms of the contract.

This is in accordance with FAR Clause 52.232-39 - Unenforceability of Unauthorized Obligations which is incorporated by reference herein.

52.212-4 Contract Terms and Conditions - Commercial Products and Commercial Services. (NOV 2023) (Deviation MAR 2026)

(a) Definitions. The clause at Federal Acquisition Regulation (FAR) 52.202-1, Definitions, is incorporated by reference.

(b) Inspection/Acceptance. The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. If repair/replacement or reperformance will not correct the defects or is not possible, the Government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its post acceptance rights—

(1) Within a reasonable time after the defect was discovered or should have been discovered; and

(2) Before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

(c) Assignment. The Contractor or its assignee may assign its rights to receive payment due as a result of performance of this contract to a bank, trust company, or other financing institution, including any Federal lending agency in accordance with the Assignment of Claims Act (31 U.S.C. 3727). However, when a third party makes payment (e.g., use of the Governmentwide commercial purchase card), the Contractor may not assign its rights to receive payment under this contract.

(d) Changes. Changes in the terms and conditions of this contract may be made only by written agreement of the parties.

(e) Disputes. This contract is subject to 41 U.S.C. chapter 71, Contract Disputes. Failure of the parties to this contract to reach agreement on any request for equitable adjustment, claim, appeal, or action arising under or relating to this contract shall be a dispute to be resolved in accordance with the clause FAR 52.233-1, Disputes, which is incorporated in this contract by reference. The Contractor shall proceed diligently with performance of this contract, pending final resolution of any dispute arising under the contract.

(f) Excusable delays. The Contractor shall be liable for default unless nonperformance is caused by an occurrence beyond the reasonable control of the Contractor and without its fault or negligence. Examples of occurrences include acts of God or the public enemy, acts of the Government in either its sovereign or contractual capacity, fires, floods, epidemics, quarantine restrictions, strikes, unusually severe weather, and delays of common carriers. When an excusable delay occurs, the Contractor shall—

(1) Notify the Contracting Officer in writing as soon as possible;

(2) Remedy the delay as quickly as possible; and

(3) Notify the Contracting Officer when the occurrence is over.

(g) Invoice. The Government will handle invoices according to the Prompt Payment Act (31 U.S.C. 3903) and 5 CFR part 1315. The Contractor shall submit invoices to the address designated in the contract to receive invoices.

An invoice must include the information required by 5 CFR part 1315.9(b).

(h) Patent indemnity. The Contractor shall indemnify the Government and its officers, employees, and agents against liability, including costs, for actual or alleged direct or contributory infringement of, or inducement to infringe, any United States or foreign patent, trademark, or copyright, arising out of the performance of this contract, provided the Contractor is reasonably notified of such claims and proceedings.

(i) Payment—

(1) Items accepted. Payment shall be made for items accepted by the Government that have been delivered to the delivery destinations set forth in this contract.

(2) Prompt payment. The Government will make payment in accordance with the Prompt Payment Act (31 U.S.C.

3903) and prompt payment regulations at 5 CFR part 1315.

(3) Discount. In connection with any discount offered for early payment, time shall be computed from the date of the invoice. For the purpose of computing the discount earned, payment shall be considered to have been made on the date that appears on the payment check or the specified payment date if an electronic funds transfer payment is made.

(4) Overpayments. If the Contractor becomes aware of a duplicate contract financing or invoice payment or that the Government has otherwise overpaid on a contract financing or invoice payment, the Contractor shall—

(i) Remit the overpayment amount to the payment office cited in the contract along with a description of the overpayment including the—

(A) Circumstances of the overpayment (e.g., duplicate payment, erroneous payment, liquidation errors, date(s) of overpayment);

(B) Affected contract number and delivery order number, if applicable;

(C) Affected line item or subline item, if applicable;

(D) Contractor point of contact; and

(ii) Provide a copy of the remittance and supporting documentation to the Contracting Officer.

(5) Interest.(i) All amounts that become payable by the Contractor to the Government under this contract shall bear simple interest from the date due until paid unless paid within 30 days of becoming due. The interest rate shall be the interest rate established by the Secretary of the Treasury as provided in 41 U.S.C. 7109, which is applicable to the period in which the amount becomes due, as provided in (i)(6)(v) of this clause, and then at the rate applicable for each six-month period as fixed by the Secretary until the amount is paid.

(ii) The Government may issue a demand for payment to the Contractor upon finding a debt is due under the contract.

(iii) Final decisions. The Contracting Officer will issue a final decision as required by FAR part 33 if–

(A) The Contracting Officer and the Contractor are unable to reach agreement on the existence or amount of a debt within 30 days;

(B) The Contractor fails to liquidate a debt previously demanded by the Contracting Officer within the timeline specified in the demand for payment unless the amounts were not repaid because the Contractor has requested an installment payment agreement; or

(C) The Contractor requests a deferment of collection on a debt previously demanded by the Contracting Officer (see FAR part 32).

(iv) If a demand for payment was previously issued for the debt, the demand for payment included in the final decision shall identify the same due date as the original demand for payment.

(v) Amounts shall be due at the earliest of the following dates:

(A) The date fixed under this contract.

(B) The date of the first written demand for payment, including any demand for payment resulting from a termination for cause.

(vi) The interest charge shall be computed for the actual number of calendar days involved beginning on the due date and ending on-

(A) The date on which the designated office receives payment from the Contractor;

(B) The date of issuance of a Government check to the Contractor from which an amount otherwise payable has been withheld as a credit against the contract debt; or

(C) The date on which an amount withheld and applied to the contract debt would otherwise have become payable to the Contractor.

(vii) The interest charge made under this clause may be reduced under the procedures for interest credits prescribed in FAR part 32 in effect on the date of this contract.

(j) Risk of loss. Unless the contract specifically provides otherwise, risk of loss or damage to the supplies provided under this contract shall remain with the Contractor until, and shall pass to the Government upon—

(1) Delivery of the supplies to a carrier, if transportation is f.o.b. origin; or

(2) Delivery of the supplies to the Government at the destination specified in the contract, if transportation is f.o.b.

destination.

(k) Taxes. The contract price includes all applicable Federal, State, and local taxes and duties.

(l) Termination for the Government’s convenience. The Government reserves the right to terminate this contract, or any part hereof, for its sole convenience. In the event of such termination, the Contractor shall immediately stop all work and shall immediately cause any and all of its suppliers and subcontractors to cease work. Subject to the terms of this contract, the Contractor shall be paid a percentage of the contract price reflecting the percentage of the work performed prior to the notice of termination, plus reasonable charges the Contractor can demonstrate to the satisfaction of the Government using its standard record keeping system, have resulted from the termination. The Contractor shall not be required to comply with the cost accounting standards or contract cost principles for this purpose. This paragraph does not give the Government any right to audit the Contractor’s records. The Contractor shall not be paid for any work performed or costs incurred which reasonably could have been avoided.

(m) Termination for cause. The Government may terminate this contract, or any part hereof, for cause in the event of any default by the Contractor, or if the Contractor fails to comply with any contract terms and conditions, or fails to provide the Government, upon request, with adequate assurances of future performance. The Government will send a cure notice to the Contractor, unless the reason for the termination is late delivery. In the event of termination for cause, the Government shall not be liable to the Contractor for any amount for supplies or services not accepted, and the Contractor shall be liable to the Government for any and all rights and remedies provided by law. If it is determined that the Government improperly terminated this contract for default, such termination shall be deemed a termination for convenience.

(n) Title. Unless specified elsewhere in this contract, title to items furnished under this contract shall pass to the Government upon acceptance, regardless of when or where the Government takes physical possession.

(o) Warranty. The Contractor warrants and implies that the items delivered under this contract are merchantable and fit for use for the particular purpose described in this contract.

(p) Limitation of liability. Except as otherwise provided by an express warranty, the Contractor will not be liable to the Government for consequential damages resulting from any defect or deficiencies in accepted items.

(q) Compliance with laws unique to Government contracts.