Soaps RFR Amended.docx

MASSACHUSETTS DEPARTMENT OF TRANSPORTATION (MassDOT )

HIGHWAY OPERATIONS

10 PARK PLAZA

BOSTON, MA 02116

REQUEST FOR RESPONSE (RFR)

DOCUMENT TITLE: INDUSTRIAL SOAPS AND CLEANERS

COMMBUYS Bid#: BD-15-1030-0H100-0H099-00000004466 Document # / Project Info #: 88418 Release Date: 06/08/15Amended 6/15/15

This Procurement is accordance with the World Trade Organization Procurement Agreement

Please Note: This is a single document associated with a complete Bid (also referred to as Solicitation) that can be found on www.COMMBUYS.com. All Bidders are responsible for reviewing and adhering to all information, forms and requirements for the entire Bid, which are all incorporated into the Bid. Bidders may also contact the COMMBUYS Helpdesk at COMMBUYS@state.ma.us or the COMMBUYS Helpline at 1-888-MA-STATE. The Helpline is staffed from 8:00 AM to 5:00 PM Monday through Friday Eastern Standard or Daylight time, as applicable, except on federal, state and Suffolk county holidays.

Document Sensitivity Level: High during development; Low once published. Template v 8.1

Table of Contents Page i Document Sensitivity Level: High during development; Low once published.

RFR Introduction and General Description Procurement Scope and Description The Massachusetts Department of Transportation (MassDOT) is soliciting bidders for the acquisition of industrial soaps and cleaners. Specifically is seeking the following items:

· Liquid Cleaning Compound: ChemStation product 6801 or equal

· Pressure Cleaner Washer: ChemStation product 5028 or equal

· Tunnel Wash Soap: ChemStation product 2452 or equal Applicable Procurement Law This Bid is issued under MGL c. 7, § 22; c. 30, § 51, § 52; 801 CMR 21.00 Number of awards The target maximum number of Contractors is one (1). This is a target number; MassDOT may award more or fewer Statewide Contracts if it is in the best interest of MassDOT to do so.

Adding Contractors after initial Statewide Contract award If, over the life of the Contract, MassDOT determines that additional Contractors should be added, these may first be drawn from qualified companies which responded to this Solicitation but were not awarded contracts. If necessary to meet the requirements of MassDOT, this Solicitation may be reopened to obtain additional bids.

Eligible Entities Any contracts resulting from this RFR may be used by MassDOT only.

Acquisition Method(s) The acquisition method(s) to acquire services from this Solicitation are Outright Purchase.

Estimated Value of the Contract The estimated value of purchase(s) resulting from this Bid is $200,000 for the initial contract duration. MassDOT makes no guarantee that any commodities or services will be purchased from any Contract resulting from this Bid. Any estimates or past procurement volumes referenced in this Bid are included only for the convenience of Bidders, and are not to be relied upon as any indication of future purchase levels. The estimated value for this Bid was based on spending on previous, similar contracts.

Contract Duration

Initial Duration

N/A

The length of the contract, specifically when the contract begins, is dependent upon receiving properly executed award paperwork from the bidder. If award paperwork is received late, the full contract length may be less than indicated above. The contract end date shall remain the same for all contractors. No agreements for services may be executed after the Contract has expired.

estimated Procurement Calendar

Times are Eastern Standard/Daylight Savings (US), as displayed on the COMMBUYS system clock displayed to Bidders after logging in. If there is a conflict between the dates in this Procurement Calendar and dates in the Bid’s Header, the dates in the Bid’s Header on COMMBUYS shall prevail. Bidders are responsible for checking the Bid record, including Bid Q&A, on COMMBUYS for Procurement Calendar updates.

Written questions via the Bid Q&A on COMMBUYS The “Bid Q&A” provides the opportunity for Bidders to ask written questions and receive written answers from MassDOT regarding this Bid. All Bidders’ questions must be submitted through the Bid Q&A found on COMMBUYS (see below for instructions). Questions may be asked only prior to the Deadline for Submission of Questions stated in the Estimated Procurement Calendar. The issuing department reserves the right not to respond to questions submitted after this date. It is the Bidder’s responsibility to verify receipt of questions.

Please note that any questions submitted to MassDOT using any other medium (including those that are sent by mail, fax, email or voicemail, etc.) will not be answered. To reduce the number of redundant or duplicate questions, Bidders are asked to review all questions previously submitted to determine whether the Bidder’s question has already been posted.

Bidders are responsible for entering content suitable for public viewing, since all of the questions are accessible to the public. Bidders must not include any information that could be considered personal, security sensitive, inflammatory, incorrect, collusory, or otherwise objectionable, including information about the Bidder’s company or other companies. MassDOT reserves the right to edit or delete any submitted questions that raise any of these issues or that are not in the best interest of MassDOT or this Bid.

All answers are final when posted. Any subsequent revisions to previously provided answers will be dated.

It is the responsibility of the prospective Bidder and awarded Contractor to maintain an active registration in COMMBUYS and to keep current the email address of the Bidder’s contact person and prospective contract manager, if awarded a contract, and to monitor that email inbox for communications from the Purchasing Department, including requests for clarification. The Purchasing Department and MassDOT assume no responsibility if a prospective Bidder’s/awarded Contractor’s designated email address is not current, or if technical problems, including those with the prospective Bidder’s/awarded Contractor’s computer, network or internet service provider (ISP) cause email communications sent to/from the prospective Bidder/Awarded contractor and the Purchasing Department to be lost or rejected by any means including email or spam filtering.

Locating Bid Q&A Log into COMMBUYS, locate the Bid, acknowledge receipt of the Bid, and scroll down to the bottom of the Bid Header page. The “Bid Q&A” button allows Bidders access to the Bid Q&A page.

Amendment Deadline MassDOT reserves the right to make amendments to the Bid after initial publication. It is each Bidder’s responsibility to check COMMBUYS for any amendments, addenda or modifications to this Bid, and any Bid Q&A records related to this Bid. MassDOT accepts no responsibility and will provide no accommodation to Bidders who submit a Bid based on out-of-date posted information or on information received from a source other than COMMBUYS.

Specifications Additional required terms appear in the Appendices to this RFR.

Overview The industrial soap and cleaners shall be furnished in liquid form. The compound shall consist of water soluble synthetic detergents, builders, inhibitors, buffering agents, surfactant, solvents, perfumes, and other items for the intended purpose. It shall not contain any items which will be harmful to tunnels walls and vehicles. The compound shall cause no loss of gloss to painted surfaces or shall not cause pitting or darkening of aluminum or stainless steel or cause cracking or permanent softening of natural or synthetic rubber. The compound shall not craze polycarbonates or acrylics. It shall also be biodegradable and contain no abrasives. The industrial soap and cleaners shall not emit any offensive odor or harmful or irritating vapors when used. The flashpoint for the Liquid Cleaning Compound, Pressure Cleaner Washer, and the Tunnel Wash Soap shall not be less than 140 degrees Fahrenheit in the liquid’s concentrated form.

Soaps Liquid Cleaning Compound: ChemStation product 6801 or equal

· Environmentally safe and shall not contain caustics, phosphates, or carcinogen ingredients listed by OSHA, NTB, or IARC. Must be in compliance with the Massachusetts Water Resources Authority – Sewer Use Discharge Permits.

· Concentrated high dilution use for film removal on all vehicles.

· Shall remove dirt, road film and exhaust deposits without brushing.

· Must be compatible for use in all high pressure washers, steam cleaners, and automatic/manual brush systems.

· Must work in hot or cold water.

Pressure Cleaner Washer: ChemStation product 5028 or equal

· Shall not contain caustics, phosphates, or carcinogen ingredients listed by OSHA, NTB, or IARC. Must be in compliance with the Massachusetts Water Resources Authority – Sewer Use Discharge Permits

· Must be compatible for use in all high pressure washers.

Tunnel Wash Soap: ChemStation product 2452 or equal

· Shall not contain caustics, phosphates, or carcinogen ingredients listed by OSHA, NTB, or IARC. Must be in compliance with the Massachusetts Water Resources Authority – Sewer Use Discharge Permits

· Capable of removing heavy build-up of various soils commonly found in areas exposed to heavy auto and truck exhaust fumes.

Holding Tank Specifications Polypropylene Chemical Resistant 165-220 gallons (8 UNITS)

Polypropylene Chemical Resistant 1,500 gallons (2 UNITS)

Polypropylene Chemical Resistant 3,000 gallons (1 UNIT)

Miscellaneous – Transport Tank - Approximately 500 gallons Heavy duty steel reinforced tank. Must be stable for fork lifting and transporting.

Dimensions: Open Miscellaneous – Transport Tank - Approximately 1,200 gallons Heavy duty steel reinforced tank. Must be stable for fork lifting and transporting Dimensions: Open Brand name or equal Unless otherwise specified in this Bid, any reference to a particular trademark, trade name, patent, design, type, specification, producer or supplier is not intended to restrict this Bid to any manufacturer or proprietor or to constitute an endorsement of any commodity or service, and the department may consider clearly identified offers of substantially equivalent commodities and services submitted in response to such reference.

Reporting Contract Management MassDOT Contract Manager All Contract questions must be directed to the MassDOT Contract Manager. Any requests made by the Contract Manager shall be responded to within 24 hours. Contractor shall meet with Contract Manager as requested and as needed.

Contractor Contract Manger Contractor shall have a single point of contact (Contractor Contract Manager) and give advance notice to the MassDOT Contract Manager if there is a replacement.

Bidder Qualifications See Bid Response Form and follow additional instructions under section 5.

Evaluation criteria Bidder scores will be used to rank Bidders and will determine which Bidders will proceed to subsequent stages of the evaluation and/or enter into negotiations with MassDOT to receive a Contract award. Selection of the contractors for this contract will be based on the overall responsiveness of the bidder's response to this RFR. Review of the bids will focus on "best value" for the MassDOT. All mandatory requirements must be met. MassDOT reserves the right to interview bidders and perform site visits as part of the evaluation process as deemed necessary.

Evaluation Components Please note that price will carry a significant weight in the evaluation process. The following components will be evaluated:

Bid Response Form (SDP – 10% minimum) Best and Final Offer (BAFO) MassDOT reserves the right to request a Best and Final Offer (BAFO) regarding price negotiations. Additionally, MassDOT reserves the right to negotiate further price discounts at any time during the contract, specifically upon increased volume usage by MassDOT and other users that may warrant price discounts.

Instructions for Execution of Forms The purpose of this appendix is to provide guidance to Bidders on MassDOT Standard forms to be submitted (in addition to the other forms and documents required) and how they must be executed and submitted. Please note that these instructions are meant to supplement the Instructions found on each of these forms. It is advisable to print this document first so that it may be referenced when filling out these forms.

Prohibition Regarding Contract Terms Bidders must not, as part of their bid Responses, propose additional contractual terms, or supplemental or clarifying language pertaining to contractual terms, even if the proposed additions/clarifications are not in conflict with the MassDOT Terms and Conditions, the MassDOT Standard Contract Form, or other documents comprising this RFR. MassDOT does not want and will not read, consider or evaluate a line by line response to this RFR.

To Be Submitted with Bid Bid Response Form The Bid Response Form is one document located under the specifications tab. Follow instructions, complete, scan and upload as requested.

RFR Submission Checklist / First Page of Bid Response Form Strategic Sourcing Services Teams seek to reduce the number of Bidder disqualifications based on incomplete submissions. Therefore, Bidders must complete and submit the RFR Submission Checklist and all documents referenced in the Checklist. By submitting the RFR Submission Checklist with a response, Bidders agree to all specifications on COMMBUYS for this Solicitation, including the RFR and all the documents within all the tabs, including the Specifications tab.

Pages 1 Bid Response Form Scan of Insurance Scanned Copies of 3 References and reference information and/or requirements The bidder must provide three (3) commercial or governmental client references. A reference letter shall be submitted on client’s letterhead signed by client and submitted by the bidder. The reference letter shall include the name, address, telephone number, months and years of service and a brief narrative including volume of sales for each customer indicated as a reference. References should include information on overall customer service. References must be for clients or customers to whom goods and services were provided within three (3) years prior to the RFR due date. References should include largest customers and largest state government customers if available. If a bidder has done business with the Commonwealth their past performance will also be considered in this section, whether offered as a reference or not. It is required that the client references demonstrate the bidder’s ability to perform a project of similar size, nature and complexity as that described in this RFR. MassDOT reserves the right to contact references and confirm information provided and to investigate the bidder's ability to perform the services required in this RFR. If a bidder receives an unfavorable reference recommendation it may result in a bidder being disqualified from this RFR.

Prompt Payment Discount Form Complete as directed below; include with online submission. Ink signature is not required. Pursuant to the Prompt Payment Discount terms set forth in the RFR Required Specifications for Statewide Contracts and on the Prompt Payment Discount Form itself, all Bidders must execute this form. After entering the “Bidder Name” and “Date of Offer for Prompt/Early Payment Discount”, the Bidder must identify the prompt payment discount(s) terms by indicating the “Percentage Discount off of the Proposed Pricing” and the “Turn-around-time for Payments.” In the event of a hardship that prevents the Bidder from offering a prompt payment discount, the Bidder must document this fact and provide supporting information. If awarded a contract, the final negotiated Prompt Pay Discounts should be reflected on the Commonwealth Standard Contract Form.

Supplier Diversity Program (SDP) Plan Form #1 – SDP Plan Commitment Massachusetts Executive Order 524 established the Supplier Diversity Program within the Supplier Diversity Office of the Operational Services Division in order to promote the award of State Contracts in a manner that develops and strengthens Minority and/or Women Business Enterprises (M/WBEs). More recently, Executive Order No. 546 established the Service-Disabled Veteran Owned Business Enterprise Program (“SDVOBE Program”), which is designed to promote access and equity of opportunity to Commonwealth business opportunities to SDVOBE qualifying businesses. As a result, M/WBEs and SDVOBEs are strongly encouraged to submit bid Responses to this RFR, either as prime vendors, joint venture partners or subcontractors. All Bidders, regardless of their certification status, are required to submit a completed SDP Plan Form #1 – SDP Plan Commitment as part of their Response for evaluation. It is required that Supplier Diversity Program participation accounts for no less than 10% of the total points in the evaluation.

MassDOT requires Bidders to make a significant commitment to partner with certified Minority-, Women-, and Service-Disabled Veteran-Owned Businesses in order to be awarded a Contract. Bidders must identify a commitment in the form of a specific percentage of sales made under the resulting contract that will be spent with a Certified Partner(s), using SDP Plan Form #1 – SDP Plan Commitment. This percentage commitment will extend for the life of any resulting contract. Please note that no Bidder will be awarded a Contract unless and until they submit a completed SDP Plan Form #1.

After contract execution, if any, Contractors must submit a completed SDP Plan Form #2 – Declaration of SDP Partners, which can be found under the specifications tab of the solicitation, identifying a Certified Partner(s) no later than 30 days after contract execution. Contractors may defer identification of their SDP Partner(s) by checking the box in Part II, thereby acknowledging their SDP Plan commitment. Failure to submit a completed SDP Plan Form #2 by the deadline may result in penalties including contract suspension, termination, and/or award to the next apparent successful bidder.

An SDO-certified (formerly SOMWBA-certified) Bidder may not list itself or an affiliate as being a Supplier Diversity Partner to its own company.

Once an SDP Plan is submitted, negotiated and approved, MassDOT will then monitor the Contractor’s performance.

There are resources available to assist Prime Bidders in finding potential Minority Business Enterprises (MBE) and Women Business Enterprises (WBE) partners can be found at:

Resources available to assist Prime Bidders in finding potential Service-Disabled Veteran-Owned Business Enterprise (SDVOBE) partners can be found on the SDO webpage.

The Supplier Diversity Program offers training on the SDP Plan requirements as well as a SDP Webinar.

Complete as directed; include with online submission. Ink signature is not required. The specific Supplier Diversity Program (SDP) requirements for this procurement can be found earlier in this document.

Executive Order 515, Establishing an Environmental Purchasing Policy Products and services purchased by state agencies must be in compliance with Executive Order 515, issued October 27, 2009. Under this Executive Order, Executive Departments are required to reduce their impact on the environment and enhance public health by procuring environmentally preferable products and services (EPPs) whenever such products and services perform to satisfactory standards and represent best value, consistent with 801 CMR 21.00. In line with this directive, all contracts, whether departmental or statewide, must comply with the specifications and guidelines established by OSD and the EPP Program. EPPs are considered to be products and services that help to conserve natural resources, reduce waste, protect public health and the environment, and promote the use of clean technologies, recycled materials, and less toxic products. Questions concerning the EO or the appropriate specifications may be directed to OSD’s EPP Procurement Program.

Bid Spreadsheet Submit Pricing in cells B2 through B5.

Forms to be submitted only Upon Award Some of the forms listed below can be electronically signed by the Bidder, see Electronic Signatures. However, online Bidders must, if notified of Contract award, submit the following four (4) forms on paper with original ink within the timeframe referenced in the RFR section entitled Ink Signatures:

MassDOT Standard Contract Form If notified of Contract award, complete as directed below and submit on paper with original ink signature and date.

By executing this document or signing it electronically, the Bidder certifies, under the pains and penalties of perjury, that it has submitted a Response to this RFR that is the Bidder’s Offer as evidenced by the execution of its authorized signatory, and that the Bidder’s Response may be subject to negotiation by MassDOT. Also, the terms of the RFR, the Bidder’s Response and any negotiated terms shall be deemed accepted by the Operational Services Division and included as part of the Statewide Contract upon execution of this document by the State Purchasing Agent or his designee.

If the Bidder does not have a Vendor Code beginning with “VC,” or does not know what their Vendor Code is, the Bidder should leave the Vendor Code field blank. The Bidder should NOT enter a Vendor Code assigned prior to May 2004, as new Vendor Codes have been assigned to all companies since that time.

Signature and date MUST be handwritten in ink, and the signature must be that of one of the people authorized to execute contracts on behalf of the Contractor on the Contractor Authorized Signatory Listing (See below).

MassDOT Terms and Conditions If notified of Contract award, complete as directed below and submit on paper with original ink signature and date, or submit a copy of a previously executed, up-to-date copy of the form as directed below.

If the Bidder has already executed and filed the MassDOT Terms and Conditions form pursuant to another RFR or Contract, a copy of this form may be included in place of an original. If the bidder’s name, address or Tax ID Number have changed since the MassDOT Terms and Conditions form was executed, a new MassDOT Terms and Conditions form is required. The MassDOT Terms and Conditions are hereby incorporated into any contract executed pursuant to this RFR.

This form must be unconditionally signed by one of the authorized signatories (see Contractor Authorized Signatory Listing, below), and submitted without alteration. If the provisions in this document are not accepted in their entirety without modification, the entire Proposal offered in response to this Solicitation may be deemed non-responsive.

The company’s correct legal name and legal address must appear on this form, and must be identical to the legal name and legal address on the Request for Taxpayer Identification and Certification Number (Mass. Substitute W9 Form).

Request for Taxpayer Identification Number and Certification (W9 Form) If notified of Contract award, complete as directed below and submit on paper with original ink signature and date, or submit a copy of a previously executed, up-to-date copy of the form as directed below.

If a Bidder has already submitted a Request for Taxpayer Identification and Certification Number (Mass. Substitute W9 Form) and has received a valid Massachusetts Vendor Code, an original W-9 form is not required. A copy of the form as filed may be included in place of an original. If the Bidder’s name, address or Tax ID Number have changed since the Mass. Substitute W9 Form was executed, a new Mass. Substitute W9 Form is required. The information on this form will be used to record the Bidder’s legal address and where payments under a State Contract will be sent. The company’s correct legal name and legal address must appear on this form, and must be identical to the legal name and legal address on the Commonwealth Terms and Conditions. Please do not use the U.S Treasury’s version of the W9 Form.

Contractor Authorized Signatory Listing If notified of Contract award, complete as directed below and submit on paper with original ink signature and date.

In the table entitled “Authorized Signatory Name” and “Title,” type the names and titles of those individuals authorized to execute contracts and other legally binding documents on behalf of the Bidder. Bidders are advised to keep this list as small as possible, as Contractors will be required to notify the Procurement Manager of any changes. If the person signing in the signature block on the bottom of the first page of this form will also serve as an “Authorized Signatory,” that person’s name must be included in the typed table.

With regard to the next paragraph, which begins “I certify that I am the President, Chief Executive Officer, Chief Fiscal Officer, Corporate Clerk or Legal Counsel for the Contractor…,” if your organization does not have these titles, cross them out and handwrite the appropriate title above the paragraph.

The signature and date should be handwritten in ink. Title, telephone, fax and eMail should be typed or handwritten legibly.

The second page of the form (entitled “Proof of Authentication of Signature”) states that the page is optional. However, the “optional” aspect of the form is that Commonwealth Departments are not required to use it. In the case of Statewide Contracts, this page is REQUIRED, not optional. The person signing this page must be the same person signing the Standard Contract Form, the Commonwealth Terms and Conditions, and the RFR Checklist.

Please note that in two places where the form says “in the presence of a notary,” this should be interpreted to mean “in the presence of a notary or corporate clerk/secretary.” Either a notary or corporate clerk/secretary can authenticate the form; only one is required.

Organizations whose corporate clerks/secretaries authenticate this form are not required to obtain a Corporate Seal to complete this document.

Supplier Diversity Program (SDP) Plan Form #2 – Declaration of SDP Partners If awarded a Contract, complete as directed below and submit on paper with original ink signature and date. Download this form, complete, and submit by the deadline specified in the Supplier Diversity Program (SDP) requirements for this procurement, located earlier in this document. A certified Bidder may not list itself as being a Supplier Diversity Program Partner to its own company. This form is NOT the same as the SDO certification of the Bidder’s company.

Electronic Funds Transfer Form If awarded a Contract, complete as directed. All awarded bidders responding to this RFR must agree to participate in the Commonwealth Electronic Funds Transfer (EFT) program for receiving payments. Additional information about EFT is available on the Comptroller of the Commonwealth’s VendorWeb site.

Successful bidders, upon notification of contract award, will be required to enroll in EFT as a contract requirement by completing and submitting the Authorization for Electronic Funds Payment Form to this department for review, approval and forwarding to the Office of the Comptroller. If the bidder is already enrolled in the program, it may so indicate in its response. Because the Authorization for Electronic Funds Payment Form contains banking information, this form, and all information contained on this form, shall not be considered a public record and shall not be subject to public disclosure through a public records request.

HOW TO SUBMIT A BID RESPONSE

COMMBUYS refers to all solicitations, including but not limited to Requests for Proposals (RFP), Invitations for Bid (IFB), Requests for Response (RFR), Requests for Quote (RFQ), as “Bids.” All responses to Bids are referred to as “Quotes.”

Steps for Bidders to Submit a Quote

1. Launch the COMMBUYS website by entering the URL (www.COMMBUYS.com) into the browser.

2. Enter Bidder login credentials and click the Login button on the COMMBUYS homepage. Bidders must be registered in COMMBUYS in order to submit a Quote. Each Vendor has a COMMBUYS Seller Administrator, who is responsible for maintaining authorized user access to COMMBUYS.

3. Upon successful login, the Vendor home page displays with the Navigation and Header Bar as well as the Control Center. The Control Center is where documents assigned to your role are easily accessed and viewed.

4. Click on the Bids tab

5. Clicking on the Bid tab opens four sections:

a. Request for Revision

b. Bids/Bid Amendments

c. Open Bids

d. Closed Bids

6. Click on the blue Open Bid hyperlinks to open and review an open bid

7. A new page opens with a message requesting you acknowledge receipt of the bid. Click Yes to acknowledge receipt of the bid. Bidders should acknowledge receipt to receive any amendments/updates concerning this bid.

8. After acknowledgement, the bid will open.

The top left half of the page contains the following information:

a. Purchaser

b. Department

c. Contact for this bid

d. Type of purchase

i. Open Market

ii. Blanket

e. Pre-Bid Conference details (if applicable)

f. Ship-to and Bill-to addresses

g. Any attachments to the bid, which may include essential bid terms, response forms, etc.

The top right half of the bid includes the following information:

h. Bid Date

i. Required Date

j. Bid Opening Date – date the bid closes and no further quotes will be accepted

k. Informal Bid Flag

l. Date goods/services are required

9. The lower half of the page provides information about the specific goods/services the bid is requesting.

10. Click Create Quote to begin.

11. The General tab for a new quote opens. This page is populated with some information from the bid. Fields available to update include:

a. Delivery days

b. Shipping terms

c. Ship via terms

d. Is “no” bid – select if you will not be submitting a quote for this bid

e. Promised Date

f. Info Contact

g. Comments

h. Discount Percent

i. Freight Terms

j. Payment Terms It is important to note that the bid documents (RFR and attachments) may specify some or all of these terms and may prohibit you from altering these terms in your response. Read the bid documents carefully and fill in only those items that are applicable to the bid to which you are responding.

Update these fields as applicable to the bid and click Save & Continue to save any changes and create a Quote Number.

12. The page refreshes and messages display. Any message in Red is an error and must be resolved before the quote can be submitted. Any message in Yellow is only a warning and will allow processing to continue.

13. Click the Items tab. The Items tab displays information about the items requested in the bid. To view additional details about an item, click the item number (blue hyperlink) to open.

14. The item opens. Input all of your quote information and click Save & Exit.

15. Click on the Attachments Tab. Follow the prompts to upload and name all required attachments and forms and bid response documents in accordance with the instructions contained in the solicitation or bid documents. After uploading each individual file or form, click Save & Continue. After you have uploaded all required documents click Save & Exit. Be sure to review your attachments to make sure each required document has been submitted.

16. Click on the MassDOT Terms & Conditions Tab. This tab refers to the MassDOT terms and conditions that apply to this bid. The terms and conditions must be accepted before your quote can be submitted. If your acceptance is subject to any exceptions, those exceptions must be identified here. Exceptions cannot contradict the requirements of the RFR, or required MassDOT standard forms and attachments for the bid. For instance, an RFR may specify that exceptions may or will result in disqualification of your bid.

17. Click the Summary tab. Review the information and update/correct, as needed. If the information is correct, click the Submit Quote button at the bottom of the page.

18. A popup window displays asking for verification that you wish to submit your quote. Click OK to submit the quote.

19. The Summary tab redisplays with an updated Status for the quote of Submitted.

20. Your quote submission is confirmed only when you receive a confirmation email from COMMBUYS. If you have submitted a quote and have not received an email confirmation, please contact the COMMBUYS Help Desk at COMMBUYS@state.ma.us.

If you wish to revise or delete a quote after submission, you may do so in COMMBUYS: (1) for a formal bid, prior to the bid opening date, or (2) for an informal bid (which may be viewed upon receipt), prior to the opening of your quote by the issuing entity or the bid opening date, whichever is earlier. Bidders may not submit Multiple Quotes in response to a Bid unless the Bid authorizes Multiple Quote submissions. If you submit multiple quotes in response to a bid that does not allow multiple quotes, only the latest submission prior to the bid opening date will be evaluated.

Appendix 1 Alterations Bidders may not alter (manually or electronically) the Bid language or any Bid component files, except as directed in the RFR. Modifications to the body of the Bid, specifications, terms and conditions, or which change the intent of this Bid are prohibited and may disqualify a Quote.

Ownership of Submitted Quotes MassDOT shall be under no obligation to return any Quotes or materials submitted by a Bidder in response to this Bid. All materials submitted by Bidders become the property of MassDOT and will not be returned to the Bidder. MassDOT reserves the right to use any ideas, concepts, or configurations that are presented in a Bidder’s Quote, whether or not the Quote is selected for Contract award.

Quotes stored on COMMBUYS in the encrypted lock-box are the file of record. Bidders retain access to a read-only copy of this submission via COMMBUYS, as long as their account is active. Bidders may also retain a traditional paper copy or electronic copy on a separate computer or network drive or separate media, such as CD or DVD, as a backup.

Prohibitions Bidders are prohibited from communicating directly with any employee of MassDOT regarding this RFR except as specified in this RFR, and no other individual MassDOT employee or representative is authorized to provide any information or respond to any question or inquiry concerning this RFR. Bidders may contact the contact person using the contact information provided in the Header Information this Bid in the event that this RFR is incomplete or information is missing. Bidders experiencing technical problems accessing information or attachments stored on COMMBUYS should contact the COMMBUYS Helpdesk (see the document cover page for contact information).

In addition to the certifications found in MassDOT’s Standard Contract Form, by submitting a Quote, the Bidder certifies that the Quote has been arrived at independently and has been submitted without any communication, collaboration, or without any agreement, understanding or planned common course or action with, any other Bidder of the commodities and/or services described in the RFR.

Terms and Requirements Pertaining to Awarded Contracts Commonwealth Tax Exemption Invoices or invoices submitted to Massachusetts government entities must not include sales tax.

Contractor’s Contact Information It is the Contractor’s responsibility to keep the Contractor’s Contract Manager information current. If this information changes, the Contractor must notify the Contract Manager by email immediately, using the address located in the Header Information of the Purchase Order or Master Blanket Purchase Order on COMMBUYS.

MassDOT assumes no responsibility if a Contractor’s designated email address is not current, or if technical problems, including those with the Contractor’s computer, network or internet service provider (ISP), cause e-mail communications between the Bidder and MassDOT to be lost or rejected by any means including email or spam filtering.

Publicity Any Contractor awarded a contract under this Bid is prohibited from selling or distributing any information collected or derived from the Contract, including lists of participating Eligible Entities, MassDOT employee names, telephone numbers or addresses, or any other information except as specifically authorized by MassDOT.

Appendix 2 - RFR - Required Specifications In general, most of the required contractual stipulations are referenced in the Standard Contract Form and Instructions and the Commonwealth Terms and Conditions (either version). However, the following RFR provisions must appear in all Commonwealth competitive procurements conducted under 801 CMR 21.00:

The terms of 801 CMR 21.00: Procurement of Commodities and Services (and 808 CMR 1.00: Compliance, Reporting and Auditing for Human and Social Services, if applicable) are incorporated by reference into this RFR. Words used in this RFR shall have the meanings defined in 801 CMR 21.00 (and 808 CMR 1.00, if applicable). Additional definitions may also be identified in this RFR. Other terms not defined elsewhere in this document may be defined in OSD’s Glossary of Terms. Unless otherwise specified in this RFR, all communications, responses, and documentation must be in English, all measurements must be provided in feet, inches, and pounds and all cost proposals or figures in U.S. currency. All responses must be submitted in accordance with the specific terms of this RFR.

Items with the text, " Required for POS Only" specify a requirement for Purchase of Service (POS) human and social services procured under 801 CMR 21.00, Procurement of Commodities or Services, Including Human and Social Services and 808 CMR 1.00, Compliance, Reporting and Auditing for Human and Social Service.

COMMBUYS Market Center. COMMBUYS is the official source of information for this Bid and is publicly accessible at no charge at www.commbuys.com. Information contained in this document and in COMMBUYS, including file attachments, and information contained in the related Bid Questions and Answers (Q&A), are all components of the Bid, as referenced in COMMBUYS, and are incorporated into the Bid and any resulting contract.

Bidders are solely responsible for obtaining all information distributed for this Bid via COMMBUYS. Bid Q&A supports Bidder submission of written questions associated with a Bid and publication of official answers.

It is each Bidder’s responsibility to check COMMBUYS for:

· Any amendments, addenda or modifications to this Bid, and

· Any Bid Q&A records related to this Bid.

The Commonwealth accepts no responsibility and will provide no accommodation to Bidders who submit a Quote based on an out-of-date Bid or on information received from a source other than COMMBUYS.

COMMBUYS Subscription. Bidders may elect to obtain a free COMMBUYS Seller subscription which provides value-added features, including automated email notification associated with postings and modifications to COMMBUYS records. However, in order to respond to a Bid, Bidders must register and maintain an active COMMBUYS Seller subscription account.

All Bidders submitting a Quote (previously referred to as Response) in response to this Bid (previously referred to as Solicitation) agree that, if awarded a contract: (1) they will maintain an active seller account in COMMBUYS; (2) they will, when directed to do so by the procuring entity, activate and maintain a COMMBUYS-enabled catalog using Commonwealth Commodity Codes; (3) they will comply with all requests by the procuring entity to utilize COMMBUYS for the purposes of conducting all aspects of purchasing and invoicing with the Commonwealth, as added functionality for the COMMBUYS system is activated; (4) Bidder understands and acknowledges that all references to the Comm-PASS website or related requirements throughout this RFR, shall be superseded by comparable requirements pertaining to the COMMBUYS website; and (6) in the event the Commonwealth adopts an alternate market center system, successful Bidders will be required to utilize such system, as directed by the procuring entity. Commonwealth Commodity Codes are based on the United Nations Standard Products and Services Code (UNSPSC).

The COMMBUYS system introduces new terminology, which bidders must be familiar with in order to conduct business with the Commonwealth. To view this terminology and to learn more about the COMMBUYS system, please visit the COMMBUYS Resource Center.

Multiple Quotes. Bidders may not submit Multiple Quotes in response to a Bid unless the RFR authorizes them to do so. If a Bidder submits multiple quotes in response to an RFR that does not authorize multiple responses, only the latest dated quote submitted prior to the bid opening date will be evaluated.

Quote Content. Bid specifications for delivery, shipping, billing and payment will prevail over any proposed Bidder terms entered as part of the Quote, unless otherwise specified in the Bid.

Supplier Diversity Program (SDP). Massachusetts Executive Order 524 established a policy to promote the award of state contracts in a manner that develops and strengthens Minority and Women Business Enterprises (M/WBEs) that resulted in the Supplier Diversity Program in Public Contracting. M/WBEs are strongly encouraged to submit responses to this RFR, either as prime vendors, joint venture partners or other type of business partnerships. Similarly, Executive Order 546 established the Service-Disabled Veteran-Owned Business Enterprise (SDVOBE) Program to encourage the participation of businesses owned and controlled by service-disabled veterans in all areas of state procurement and contracting, thereby including them in the SDP. All bidders must follow the requirements set forth in the SDP section of the RFR, which will detail the specific requirements relating to the prime vendor’s inclusion of M/WBEs and/or SDVOBEs. Bidders are required to develop creative initiatives to help foster new business relationships with M/WBEs and/or SDVOBEs within the primary industries affected by this RFR. In order to satisfy the compliance of this section and encourage bidder’s participation of SDP objectives, the Supplier Diversity Program (SDP) Plan for large procurements greater than $150,000 will be evaluated at 10% or more of the total evaluation. Once an SDP commitment, expressed as a percentage of contract revenues, is approved, the agency will then monitor the contractor’s performance, and use actual expenditures with SDO certified M/WBE contractors and the Center for Veterans Enterprise certified SDVOBEs to fulfill their own SDP expenditure benchmarks. M/WBE and SDVOBE participation must be incorporated into and monitored for all types of procurements regardless of size; however, submission of an SDP Plan is mandated only for large procurements over $150,000.

Unless otherwise specified in the RFR, the following SDP forms are required to be submitted by the deadlines noted below in order to meet the mandatory participation requirements of the SDP:

Supplier Diversity Program (SDP) Resources:

· Resources available to assist Prime Bidders in finding potential Minority Business Enterprises (MBE) and Women Business Enterprises (WBE) partners can be found at: www.mass.gov/sdp

· Resources available to assist Prime Bidders in finding potential Service-Disabled Veteran-Owned Business Enterprise (SDVOBE) partners can be found on the Operational Services Division’s SDO webpage at: www.mass.gov/sdo

· The Operational Services Division’s Supplier Diversity Program offers training on the SDP Plan requirements. The dates of upcoming trainings can be found at:…