Smart Tint - Product Information.pdf

To edit or approve this quote kindly email sales@smarttint.com or reply to this email.

Smart Tint, Inc.

2168 Nesconset Hwy Stony Brook, NY 11790

(866) 249-3077 sales@SmartTint.com www.SmartTint.com

Estimate

ACTIVITY QTY RATE AMOUNT

Smart Cling® Self Adhesive White Low Voltage

Smart Cling® Self Adhesive

White

Low Voltage

Measurements on this project:

Qty (2) 44.3" x 34.8"

Qty (2) 44.3" x 44.3"

Qty (2) 24 1/2" x 71"

Total square footage: 73

Pre-wiring of sheet = all pre-wiring logistics and any other special requests will be discussed after project deposit has been placed.

Smart Cling® Self Adhesive White Low Voltage - Details

Smart Tint® Film Specification

"Switchable film

"Power - 25-75 VAC max

"Frequency - 50/60Hz

"Current - 0.1 amperes per m2

"Power - 3 watts per m2

"Switching - less than 1 second in optimal conditions

"Operation - (on) transparent (off) opaque

"Thickness - .4 mm

"Light transmittance - On (93%) Off (7%)

"Haze Coefficient - On (2%) Off (93%)

"Tested over 3 million switches

"High temperatures - >180 degrees F

"High temperature / humidity - >50 degrees C / 95% RH

"Cold temperatures - minus 20 degrees C (over 14 days)

"UV filtering - 99%

Smart Tint Features

"Self adhesive Smart Cling® Technology film (peel and stick)

"Custom cut sizes and shapes" Circles , half moons, stars etc.

"Simply apply to any smooth glass surface or hang like a curtain"

1 0.00 0.00

"Suitable for permanent or temporary applications

"UV / Infra Red/ Solar protection"

Smart Tint® is Dimmable - You can manually adjust the level of tint with the appropriate controller.

Please note that the maximum size for Smart Cling® Self Adhesive is 70

3/4" inches in width and 1181.1 inches in height. (1800 mm x 30 m) The maximum size for Smart Tint® Non-Adhesive is 70 inches wide and 1181.1 inches in height. (1778 mm x 30m)

Larger sizes available upon request. Custom shapes and sizes are available pre-wired and ready to install. .

Smart Tint® can transform any glass into a high definition rear projection screen allowing you to display , TV images , videos and with our latest technology interactive white boards. A truly innovative product that is changing the game. .

A simple ON - OFF mode switches the film from being clear (transparent) to frosted (opaque). In its frosted state (powered off) Smart Tint® acts as an electronic blind, projector screen, providing privacy and security for any glass, window or partition.

Smart Tint® is manufactured with a self-adhesive cling layer on one side

(peel and stick) which makes it easy to apply to both new and existing glass (no special installation equipment required).

A simple ON - OFF mode switches the film from being clear (transparent) to frosted (opaque) and all of our material is dimmable.

Busbars and Wiring

UL® Rated Components

Custom Copper Foil Busbars and Wiring.

Strategically place wiring at edge of your choice.

Wires will be oriented at the direction of your choosing to suit your installation.

Wire Locations and Orientation will be confirmed by the customer.

Smart Tint Neutral Cure Silicone Sealant - Contractor Price

Smart Tint Neutral Cure Silicone Sealant is a one-part, non-slump, moisture-curing RTV (room temperature vulcanizing) that cures to form a tough, high modulus rubber with long-term flexibility and durability.

Colors available: White, Black, Clear, Grey

The neutral curing mechanism of Smart Tint 335 is ideally suited for use in confined work areas since no objectionable odors are evolved.

The non-slump characteristics of Smart Tint 335 allow application to vertical or horizontal joints without flowing or sagging.

Smart Tint 335 neutral cure silicone has excellent resistance to weathering including ozone, ultraviolet radiation, freeze-thaw conditions and airborne chemicals.

After cure, the wide heat stability range of Smart Tint 335 is from -57 C to

+204 C (-70 F to 400 F) and the sealant can be applied to surface temperatures from -18 C to +50 C (0 F to +120 F)

This Smart Tint authorized sealant is used to seal in edges of material to prevent damage to the material caused from moisture, dirt, debris, etc.

Each Container of Smart Tint Neutral Cure Silicone can cover up to 10 square feet of Smart Tint and Smart Cling film

100 Watt Power Control Unit/with remote 110-120vac input

The LV100wpcu power control unit is extremely efficient and designed for long term permanent installation.

The LV100wpcu is made of fine copper material, and has a very stable output.. The operating temperature is very low and suitable for various environments.

The LV100wpcu power control unit has a circuit board that utilizes a self recovery system designed to cut the power by itself when over loaded.

This system will auto restart when over load or short is corrected.

Rated Power: 100W

Rated Ampere: 2A

Input Voltage: AC 110-120 vac

Output voltage: AC 48 VAC

Size: 2.5" x 6.5" 2.5" or 63.5mm x 165.1mm x 63.5mm

NOTE: This wiring diagram shown is for layout purposes only . Each piece of material requires a dedicated power line from the output side of the power control unit to the material to properly function. Contact your electrician or electrical contractor for any electrical installation questions.

All power control units options can be custom tailored to meet any project size or applications

Includes RF remote and dry contact relay input compatible with 3rd party control systems such as crestron, lutron, savant, dmx etc.

Armored Power Transfer Cable

Armored Power Transfer Cable - For Doors

Accessories:Smart Tint Installation Kit

Smart Tint Installation Kit

Includes:

-Smart Glass Spray - Nano Glass Solution

-Advanced Glass Strengthener & Pre-Treatment for Smart Film Installation

32 Oz bottle Applicator, Spray Bottle

-(4) Nano Fiber Cloths

-(2) Installation Hard Cards w/ Micro Fiber Edge

-(1) Window Squeegee

-(1) Titanium Razor

-(2) Polycarbonate Razorblades

Order Process

With purchase, or a deposit towards your order, Smart Tint® will provide the following:

-Wire and Busbar Manufacturing

-Custom Precise Machine Cut material

-Installation Advice (Up to 1 hour of engineering time with a direct phone line to the production team)

-Technical Support for 3rd Party Controllers and automation systems

-Industry leading 5 year warranty

Once you place your order our engineering department will send you a set of drawings for you to confirm all final measurements and preferred wire locations. At that time you can make any final adjustments.

Normal manufacturing is 48 hours upon receipt of the approved drawings.

Your order will then go to quality control and then ship out to you.

Expedited services are available upon request.

1 0.00 0.00

Accepted By Accepted Date