SF33_SPE8E625R0003_RFP.PDF

10. FOR

INFORMATION

CALL:

13. DISCOUNT FOR PROMPT PAYMENT

(See Section I, Clause No. 52.232-8)

SOLICITATION, OFFER AND AWARD 1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 700)

RATING

2. CONTRACT No.

SPE8E6-25-R-0003

3. SOLICITATION No. 4. TYPE OF SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)X

2026 APR 13

5. DATE ISSUED

1000199985

6. REQUISITION/PURCHASE No.

7. ISSUED BY 8. ADDRESS OFFER TO

NOTE : In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

9. Sealed offers in original and copies for furnishing the supplies or services in the Schedule will be received at the place specified in Item 8, or if handcarried, in the depository located in local time

CAUTION - LATE Submissions, Modifications, and Withdrawals: See Section L, Provision No. 52.214-7 or 52.215-1. All offers are subject to all terms and conditions contained in this solicitation.

11. TABLE OF CONTENTS

DESCRIPTION

25. PAYMENT WILL BE MADE BY

CODE

SOLICITATION

until (Hour) (Date)

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION NOT USABLE

STANDARD FORM 33 (Rev.9-97) Prescribed by GSA FAR (48 CFR) 53.214 (c)

OFFER (Must be fully completed by offeror ) NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

AWARD (To be completed by Government)

16. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN OFFER

(Type or print)

14. ACKNOWLEDGMENT OF AMEND-

MENTS (The offeror acknowledges receipt of amendments to the SOLICITATION for offerors and related documents numbered and dated):

12. In compliance with the above, the undersigned agrees, if this offer is accepted within period is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

CONTRACT ADMINISTRATION DATA L INSTRS., CONDS., AND NOTICES TO OFFERORS

SPECIAL CONTRACT REQUIREMENTS M EVALUATION FACTORS FOR AWARD

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

(X) PAGE(S) SEC. DESCRIPTION PAGE(S)

SUPPLIES OR SERVICES AND PRICES/COSTS PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACH.

PART I - THE SCHEDULE PART II - CONTRACT CLAUSES

I CONTRACT CLAUSESSOLICITATION/CONTRACT FORM

DESCRIPTION/SPECS./WORK STATEMENT J LIST OF ATTACHMENTS

INSPECTION AND ACCEPTANCE

PACKAGING AND MARKING PART IV - REPRESENTATIONS AND INSTRUCTIONS

DELIVERIES OR PERFORMANCE

K REPRESENTATIONS, CERTIFICATIONS AND OTHER

STATEMENTS OF OFFERORS

AMENDMENT NO. DATEAMENDMENT NO. DATE

G

H

SEC.

B

A

C

E

D

F

(X)

FACILITY

CODE

15C. CHECK IF REMITTANCE ADDRESS IS

DIFFERENT FROM ABOVE - ENTER SUCH

ADDRESS IN SCHEDULE

17. SIGNATURE

19. ACCEPTED AS TO ITEMS NUMBERED

23. SUBMIT INVOICES TO ADDRESS SHOWN IN22. AUTHORITY FOR USING OTHER THAN FULL AND OPEN COMPETITION:

24. ADMINISTERED BY (If other than item 7) CODE CODE

27. UNITED STATES OF AMERICA

(Signature of Contracting Officer )

26. NAME OF CONTRACTING OFFICER (Type or print) calendar days (60 calendar days unless a different

15A. NAME AND

ADDRESS

OF OFFER-

OR

10 U.S.C. 2304 (c) ( 41 U.S.C. 253 (c) () )

DLA TROOP SUPPORT

CONSTRUCTION & EQUIPMENT (CLASS IV)

700 ROBBINS AVENUE

PHILADELPHIA PA 19111-5096

USA

See Continuation Sheet

Not Applicable 3:00PM 2026-May-14

Matthew Eckenrode DME0017

A. NAME

Phone: DSN(445) 737-2546

FAX:

B. PHONE/FAX (NO COLLECT CALLS)

Matthew.Eckenrode@dla.mil

C. EMAIL ADDRESS

X 1

X 2 X 49

X 83

X 83

X 86

15B. TELEPHONE NUMBER 18. OFFER DATE

28. AWARD DATE

20. AMOUNT

10 CALENDAR DAYS (%) 20 CALENDAR DAYS (%) CALENDAR DAYS (%)30 CALENDAR DAYS (%)

21. ACCOUNTING AND APPROPRIATION

ITEM

SPE8E6

EXT.NUMBERAREA CODE

(4 copies unless otherwise specified)

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

CONTINUED ON NEXT PAGE

PAGE 2 OF 86 PAGES

SPE8E6-25-R-0003

Caution Notice

1. It is the responsibility of all those submitting offers in reply to this Request for Proposal (RFP), to read, understand and comply with the terms, conditions and restrictions of this solicitation.

2. The Points of Contact for this Request For Proposal are as follows:

Ashley Brown Acquisition Specialist

(215) 737-4848 Ashley.N.Brown@dla.mil

OR

Matthew Eckenrode Contracting Officer

(445) 737-2546 Matthew.Eckenrode@dla.mil

3. All questions and requests for clarification regarding this solicitation must be submitted to the Contracting Officer by no later than 3:00 p.m. EST on May 14, 2026. Questions received after that date and time will not be answered. Those questions submitted prior to that date and time will be answered to the extent practicable by amendment to the solicitation thereafter.

4. The Government is issuing an Unrestricted Solicitation with a Hubzone Preference for the proposed acquisition of the Expeditionary Barrier System (EBS). FAR Part 15, Contracting by Negotiation procedures will be utilized. The proposed acquisition is for 18 items.

4a. The Government intends to issue at least two (2) awards but a maximum of three (3) awards, with post-award competition of delivery order requirements; however, the Government reserves the right to make a single award if it is in the best interest of the Government. The resultant contract(s) will be Fixed-Price, Indefinite-Delivery, Indefinite-Quantity (IDIQ) Long Term Contract(s) (LTC) for Direct Vendor Delivery (DVD) and DLA Direct requirements.

4b. Successful offerors are required to have and maintain at least one CONUS origin delivery point for delivery of supplies throughout the entire term of the resultant contract(s).

4c. The contract(s) will consist of a base ordering period of two (2) years, with three (3) one-year option periods.

Orders for CONUS depots, CONUS customers, for SOCOM, NORTHCOM, or INDOPACOM will be inspected at a CONUS origin point.

Transportation from CONUS origin points will utilize VSM for transportation, delivery@dla.mil. Orders for DLA Distribution Europe, of OCONUS customer in EUCOM, CENTCOM, or AFRICOM will be inspected at OCONUS or CONUS origin point. OCONUS origin points will book transportation through DCMA utilizing VSM.shipments@dcma.mil.

4d. The FSC for ALL NSNs is 5450. Disregard any reference to FSC 5670.

5. The solicitation sets forth instructions to the offeror and evaluation factors for award. Proposals will be evaluated according to Lowest Price Technically Acceptable (LPTA) source selection procedures. The Government will make award(s) to the responsible offeror(s), offering the lowest price(s), whose offer(s) conforms to all of the terms and conditions set forth in this solicitation. Instructions for the entire proposal package to offerors is provided in this section, including the full requirement for Government FAT.

Compliance with Solicitation Requirements (Technical)

Compliance with solicitation requirements will be defined as an offer that meets the requirements of the solicitation and takes no exception to its terms and conditions. Proposals being evaluated against this requirement will receive a rating of acceptable/unacceptable:

Acceptable: Proposal meets the minimum requirements of the solicitation as specified in the caution notice section of the solicitation.

Unacceptable: Proposal does not meet the minimum requirements of the solicitation as specified in the caution notice section of the solicitation.

Past Performance Requirements

The past performance evaluation is an assessment of the offeror’s probability of meeting the solicitation requirements. Each offeror will be assigned one overall past performance rating of Acceptable or Unacceptable based on the chart below. In the case of an offeror without a record of relevant part performance or for whom information on past performance is not available or so sparse that no meaningful past performance rating can be reasonably assigned, the offeror may not be evaluated favorably or unfavorably on past performance (see FAR 15.305(a)(2)(iv)). Therefore, the offeror shall be determined to have unknown or neutral past performance. In the context of acceptability/unacceptability, “unknown” shall be considered “acceptable.”

Acceptable: Based on the offeror’s performance record, the Government has a reasonable expectation that the offeror will successfully perform the required effort, or the offeror’s performance record is unknown.

Unacceptable: Based on the offeror’s performance record, the Government has no reasonable expectation that the offeror will be able to successfully perform the required effort.

PAGE 3 OF 86 PAGES

SPE8E6-25-R-0003

If multiple awards are made, each delivery order will be competed amongst the multiple awardees to the extent that they have passed the FAT in accordance with MIL DTL 32488 and are not subject to quality investigations resulting from Supply Discrepancy Reports (SDRs) and/or Product Quality Deficiency Reports (PQDRs) as a result of performance under this contract. The evaluation factors for the competed delivery orders will be price and delivery. The lowest-priced response to each delivery order e-mail will receive the subsequent delivery order.

6. Offers will be considered on an all or none basis and will be using Lowest-Priced Technically Acceptable Best Value Procedures. Please ensure that pricing is provided for all CLINs to be considered for an award. Offerors must submit ceiling prices for the base period and each option period for each NSN as identified in the solicitation in Section B.

Offers that fail to provide pricing for one or more items may be rejected as non-responsive and/or technically unacceptable for award. Prices submitted by the offeror and accepted by the Government will become fixed ceiling prices for the applicable NSN and contract period upon award. This means that these prices will constitute a NOT TO EXCEED ceiling price for the base period and each option period, if exercised. When competing for delivery orders, if multiple awards are made, the contractor may quote a price that is below its ceiling price but may not quote a price that exceeds its ceiling price.

7. The resultant contracts will have a guaranteed minimum of $1,410,000.00 (10% of the Annual Estimated Quantity – AEQ) per contract and a maximum of $500,000,000.00 which is a shared maximum for all resulting contracts awarded. The estimated annual contract value is $25,000,000.00. All negotiated pricing will be fixed price.

8. The lowest-priced offers submitted for each CLIN will be the only proposals considered for awards of those CLINs provided their proposals are technically acceptable, the proposed price(s) can be determined fair and reasonable, and the vendors can be determined responsible.

9. Pricing: proposed unit ceiling prices shall be annotated in the schedule of supplies of this solicitation. Note that the (AEQ) Annual Estimated Quantity is provided as information only. The quantity represented is the annual estimated quantity and is not a fixed quantity. It represents no guarantee of future purchase quantities.

10. Offerors must submit unit ceiling pricing for all four pricing periods (two-year base period and three, one-year option periods) for all CLINs.

11. Each offeror’s price proposal will be evaluated for price reasonableness. All EBS sizes should be priced the same regardless of color. EBS 1B (beige/sand color) and EBS 1G (green color) should be priced the same per unit. Pricing that is not the same for each color will not be accepted and the proposal will be deemed technically unacceptable.

12. Certified cost and pricing data is not required at this time; however, the offeror may be required to submit certified cost and pricing data or data other than certified cost or pricing data during discussions, if held, to the extent deemed necessary by the Contracting Officer.

13. The award(s) will be based on the lowest evaluated price proposal meeting or exceeding the acceptability standards for non-price factors that will be most advantageous to the Government. The non-price evaluation factors will be technical acceptability and past performance.

13a. Technical acceptability is defined as the ability to meet all technical specifications and meet all other terms and conditions of this solicitation. The Government will review and consider past performance including but not limited to performance on contracts of similar scope and complexity and performance data obtained in the Supplier Performance Risk System (SPRS) and the Contractor Performance Assessment Reporting System (CPARS).

13b. Past performance will be evaluated in accordance with Revolutionary FAR Overhaul (RFO) 15.202(c). The awards will be made based on the lowest evaluated price of the proposal meeting or exceeding the acceptability standards for non-cost factors. Fair and reasonable prices are expected, as this is a competitive solicitation. The lowest priced, technically acceptable source selection process is appropriate when best value is expected to result from selection of the technically acceptable proposal with the lowest evaluated price.

14. The contract(s) will be awarded to the vendor(s) who provide the lowest fair and reasonable price, that meets all the terms and conditions in the solicitation, and can be determined responsible in accordance with FAR 9.104 and FAR 9.105.

15. *** Please be advised that all 'fill-in' clause(s) must be completed. Failure to complete these clauses may render your proposal technically unacceptable ***

16. Price evaluation: all offered prices will be evaluated against the requirements of the solicitation. The offered pricing will be calculated by multiplying the unit price, (F.O.B. Origin), for each CLIN by the corresponding Annual Estimated Quantity (AEQ) to arrive at the total offered price. The sum of the five (5) total amounts of evaluated prices will calculate the total evaluated proposed price for these contracts. Offerors are required to complete and return the solicitation and take no exception to the requirements of the solicitation.

17. The Annual Estimated Quantity (AEQ) listed in the solicitation is only an estimate based on data available to the Government at the time of issuance. The AEQ represents the Government’s good faith estimate of the annual demand for the item. The AEQ is for informational purposes only and the Government is in no way obligated to purchase this quantity when offering pricing, offerors must take into account any business risk associated with this estimate. The award decision factors include: price, delivery and past performance on previous orders.

NSN Nomenclature U/I Annual Estimated Quantity(AEQ)

5450-01-618-0992 EBS 1B EA 3,610

5450-01-618-1018 EBS 1G EA 21

5450-01-618-1038 EBS 2B EA 7,189

5450-01-618-1041 EBS 2G EA 1

5450-01-618-1046 EBS 3B EA 712

PAGE 4 OF 86 PAGES

SPE8E6-25-R-0003

5450-01-618-1054 EBS 3G EA 10

5450-01-618-1064 EBS 4B EA 3,305

5450-01-618-1069 EBS 4G EA 1

5450-01-618-1074 EBS 5B EA 3,536

5450-01-618-1101 EBS 5G EA 57

5450-01-618-1105 EBS 7B EA 3,200

5450-01-618-1117 EBS 7G EA 6

5450-01-618-1129 EBS 8B EA 724

5450-01-617-7651 EBS 8G EA 1

5450-01-618-1134 EBS 9B EA 463

5450-01-618-1137 EBS 9G EA 20

5450-01-618-1141 EBS 10B EA 606

5450-01-618-1143 EBS 10G EA 15

18. In addition to those items specified in the award, the scope includes any other items affiliated with the family of Expeditionary Barrier System (EBS) units. National Stock Numbers (NSNs) within the scope may be added to this initiative or any resultant contract at a later date in accordance with DLA Directive Procurement Note L27 - Addition and Deletion of Items (AUG 2017).

19. Offerors must submit Government First Article Test (FAT) pricing on each NSN, regardless of whether or not they are approved to manufacture EBS at the time of their proposal submission. A pricing spreadsheet for Production and FAT CLINs is included in the RFP as Attachment A to assist vendors in keeping their pricing streamlined and in one location. FAT pricing is entered in the last column. The proposed unit price for the FAT will be multiplied by the FAT sample quantity to calculate the Total Evaluated FAT Price. The total evaluated price for all line items will be added to the total FAT price offered to arrive at the total evaluated contract price. Government First Article Test (FAT) samples shall be submitted in accordance with MTL-DTL-32488 (attached to this solicitation - pay special attention to sections 4.5.2 and 6.4 noted below. For CLINs 0001 through 0018, each NSN requires 6 (six) samples as noted below:

4.5.2 First Article Test Samples. The contractor shall provide to the Government, three Type 1 and three Type 7 barriers to perform the burn propagation (paragraph 4.5.5) and small scale structural load (paragraph 4.5.6) tests.

Samples must include at least one Class B (beige/sand) and one Class G (green) barrier for visual color confirmation. See paragraph 6.4 for test laboratory address.

6.4 First article test laboratory. First article test samples should be sent to:

U.S. Army Research and Development Center

CEERD-GS-V

3909 Halls Ferry Road Vicksburg, MS 39180

20. The Berry Amendment and Trade Agreements Act clauses apply. See DFARS 252.225-7012, Preference for Certain Domestic Commodities (DEC 2017) and DFARS 252.225-7021, Trade Agreements – Basic (DEC 2017), below. Furthermore, this means that all fabric components of the end products must be produced in the United States. All awardees’ manufacturing facilities shall be accessible to the Government for Inspection and Acceptance.

21. All awardees manufacturing facilities shall be accessible to the Government for Inspection and Acceptance.

22. DFARS 252.247-7023 - Transportation of Supplies by Sea applies to this requirement.

23. Inspection and acceptance will be at origin. Offerors manufacturing and inspection location must be accessible by Defense Contract Management Agency (DCMA) for physical inspection will be at the CONUS site. Virtual inspection is not acceptable. Alternate manufacturing/inspection and acceptance sites must also be accessible and approved by DCMA prior to being approved by the Contracting Officer.

24. F.O.B. Origin pricing is required for all orders.

25. MIL STD 129 labels/tags are required for each Unit of Issue.

26. Failure to fully comply with the required packaging & labeling provisions may result in payment delays or rejection of delivered material.

27. The Defense Logistics Agency’s (DLA’s) Vendor Shipment Module (VSM) will make the transportation arrangements.

Utilization of VSM by the Contractor is mandatory. For more information about VSM, contact the supply chain transportation office helpdesk at (800) 456-5507 or via email to delivery@dla.mil. To register as a VSM user, please visit https://vsm.distribution.dla.mil.

28. Variation in Quantity of +0%, -0% will be applicable for all orders.

29. It is the offeror’s responsibility to ensure that its offer reaches the correct Government office designated in the solicitation, prior to the specified time.

30. Proposals will only be accepted via e-mail to the points of contact listed. In paragraph two and thirty-seven of this Caution Notice.

31. The Government reserves the right to cancel this solicitation at any point in time. If this should occur, the Government will not be liable for an offeror’s proposal preparation costs, or any other costs associated with the

PAGE 5 OF 86 PAGES

SPE8E6-25-R-0003

offerors’ anticipated responses to this solicitation.

31a. Individual delivery orders under the resultant contracts will be competed amongst the awardees. A Request for Quote (RFQ) will be issued via email and awardees will be given 48 hours to respond. In the event of a non-response, the awardee’s ceiling price will be accepted as the offered unit price. All quotes will be evaluated in accordance with the evaluation criteria provided in the RFQ. Each delivery order will be competed amongst the multiple awardees to the extent that they have passed the required testing in accordance with MIL DTL 32488. The evaluation factors for the competed delivery orders will be price and delivery. The lowest-priced response to each delivery order e-mail will receive the subsequent delivery order. The Government reserves the right to direct orders to one or more particular awardees at any time, for any of the reasons set forth at FAR 16.505(b)(2)(i)(A), such as where required to fulfill the guaranteed minimum, or in instances of urgency.

31b. Any awardee that is subject to quality investigations resulting from Supply Discrepancy Reports (SDRs) and/or Product Quality Deficiency Reports (PQDRs) may not be eligible to receive delivery orders until such investigations are resolved. Additionally, the Government reserves the right to continue maintaining coverage for all items listed in the solicitation pending investigation and testing of any awardee’s products for quality, following receipt of a Product Quality Deficiency Report (“PQDR”) from any end user of the items. During periods of investigation and testing of any awardee’s products after receipt of a PQDR, orders for the affected items will be placed only as necessary to satisfy the Government’s immediate backorders and fulfill urgent requirements. Orders placed during investigation and testing periods after receipt of a PQDR will be competed among approved awardees whose products are not subject to PQDR investigations. If, at any time, there is only one awardee whose products are not subject to pending investigations, orders will be directed to that awardee pending completion of the necessary testing and/or investigation into the remaining awardee(s)’ products.

32. SEE ATTACHED FILES TO THIS SOLICITATION FOR ALLOWABLE TECHNICAL EXCEPTIONS AND SPECIFICATION MODIFICATIONS DETAIL

SPECIFICATION FOR EXPEDITIONARY BARRIER SYSTEM, MIL-DTL-32488.

33. The NSNs subject to this solicitation are not currently subject to Surge and Sustainment requirements, but may become subject to Surge and Sustainment requirements prior to award or during the period of performance of the resultant contract(s). A Surge and Sustainment Plan/Capability Assessment Plan is not required at this time. However, in the event that any of the NSNs currently solicited becomes subject to Surge and Sustainment requirements, or if NSNs subject to Surge and Sustainment requirements are subsequently added to the resultant contracts, the offerers and/or awardees may be required to submit Surge and Sustainment Plans/Capability Assessment Plans, which shall be provided at no additional cost to the Government.

34. To be a qualifying offeror, contractors must be registered: DIBBS, VSM and SAM. Https://vsm.distribution.dla.mil https://sam.gov https://www.dibbs.bsm.dla.mil.

35. Proposals must include the following information:

1. Name of company and CAGE code.

2. If quoting as manufacturer or dealer. If quoting as a dealer, provide actual manufacturer's name, CAGE and address.

3. Phone number.

4. Point(s) of contact.

5. E-mail address

36. *** Please submit the entire solicitation document with your proposal by the solicitation closing date. Offers must be submitted on an “all or none” basis for each CLIN that an offer is submitted for. Failure to offer on “all or none” will result in rejection of the entire proposal.***

37. Proposals must be submitted to:

Ashley Brown - Contracting Specialist at Ashley.N.Brown@dla.mil And Matthew Eckenrode – Contracting Officer at Matthew.Eckenrode@dla.mil

It is the offeror's responsibility to ensure that offers reach the Government designated points of contact in the solicitation by the time and date specified for receipt of proposals.

PAGE 6 OF 86 PAGES

SPE8E6-25-R-0003

SECTION B

SUPPLIES/SERVICES: 5670-01-618-0992

ITEM DESCRIPTION:

WALL,PROTECTIVE,RAP Expeditionary Barrier System (EBS) In accordance with MIL-DTL-32488 Type 1, Class B, Contractor Notes: -Each individual EBS shall include a sufficient number of hog rings, bagged and firmly attached. -Wood Pallets shall be in compliance with MIL-STD-147.

Wrapping material shall be non-transparent that blocks UV and weather exposure. Labeling shall be in accordance with MIL-STD-129. - Lot and batch bare item markings will be applied on each U/I. Lot and batch markings will be placed on U/I were it is visible doing storage and when item is erected -Quantity per pallet: -stack with U/I to maximize but not exceed pallet dimensions. -Pallet size: 80 inches high x 45 inches wide x 55 inches long. -"DLAD clause 52.247-9012 Requirements for Treatment of Wood Packaging Material (WPM) applies".

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

SPECIFICATIONS OR COMMERCIAL ITEM DESCRIPTIONS

(CIDS) MAY BE OBTAINED FROM THE WEB SITE

http://quicksearch.dla.mil/

THIS NSN IS PROCURED AS FULLY COMPETITIVE IN

ACCORDANCE WITH A MILITARY / FEDERAL

SPECIFICATION/STANDARD. SEE SECTION L, CLAUSE

52.211-2 FOR ORDERING SUCH DATA.

QAP EQ003 APPLIES

IAW BASIC SPEC NR MIL-DTL-32488(1) NOT 1

REVISION NR 1 DTD 05/07/2024

PART PIECE NUMBER: MILDTL32488-1B

IAW REFERENCE QAP 13873 EQ003

REVISION NR D DTD 02/09/2023

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-129R(3)

REVISION NR R DTD 02/25/2023

PART PIECE NUMBER:

IAW REFERENCE QAP 14153 MIL-DTL-32488

REVISION NR DTD 01/29/2019

PART PIECE NUMBER:

IAW REFERENCE QAP 14153 SQAP-FAT3

REVISION NR DTD 06/15/2022

PART PIECE NUMBER:

PAGE 7 OF 86 PAGES

SPE8E6-25-R-0003

SUPPLY/SERVICE: 5670-01-618-0992 CONT'D

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.

https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0001 5670-01-618-0992 3,610.000 EA $ ________________ $ ________________

WALL,PROTECTIVE

,RAP

PRICING TERMS: Firm Fixed Price

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 45 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PARCEL POST ADDRESS:

FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND

CONTRACT

FREIGHT SHIPPING ADDRESS:

GOVT USE

External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date .

0001 1000199985 0001 N/A N/A 5450016180992 N/A

SUPPLIES/SERVICES: 5450-01-618-1018

with MIL-DTL-32488 Type 1, Class G, Contractor Notes: -Each individual EBS shall include a sufficient number of hog rings, bagged and firmly attached. -Wood Pallets shall be in compliance with MIL-STD-147.

Wrapping material shall be non-transparent that blocks UV and weather exposure. Labeling shall be in accordance with MIL-STD-129. - Lot and batch bare item markings will be applied on each U/I. Lot and batch markings will be placed on U/I were it is visible doing storage and when item is erected -Quantity per pallet: -stack with U/I to maximize but not exceed pallet dimensions. -Pallet size: 80 inches high

PAGE 8 OF 86 PAGES

SPE8E6-25-R-0003

SECTION B

SUPPLY/SERVICE: 5450-01-618-1018 CONT'D

x 45 inches wide x 55 inches long. -"DLAD clause 52.247-9012 Requirements for Treatment of Wood Packaging Material (WPM) applies".

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

REVISION NR 1 DTD 05/07/2024

PART PIECE NUMBER: MILDTL32488-1G

IAW REFERENCE QAP 13873 EQ003

REVISION NR D DTD 02/09/2023

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-129R(3)

REVISION NR R DTD 02/25/2023

PART PIECE NUMBER:

IAW REFERENCE QAP 14153 MIL-DTL-32488

REVISION NR DTD 01/29/2019

PART PIECE NUMBER:

IAW REFERENCE QAP 14153 SQAP-FAT3

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS%

PAGE 9 OF 86 PAGES

SPE8E6-25-R-0003

SECTION B

SUPPLY/SERVICE: 5450-01-618-1018 CONT'D

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0002 5450-01-618-1018 21.000 EA $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 45 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA-QUP:007

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND

ITEM PR PRLI PR PRLI Material Need Ship Date .

0002 1000199985 0002 N/A N/A N/A N/A

SUPPLIES/SERVICES: 5450-01-618-1038

with MIL-DTL-32488 Type 2, Class B, Contractor Notes: -Each individual EBS shall include a sufficient number of hog rings, bagged and firmly attached. -Wood Pallets shall be in compliance with MIL-STD-147.

Wrapping material shall be non-transparent that blocks UV and weather exposure. Labeling shall be in accordance with MIL-STD-129. - Lot and batch bare item markings will be applied on each U/I. Lot and batch markings will be placed on U/I were it is visible doing storage and when item is erected -Quantity per pallet: 120 -Overall pallet size: 33 inches high x 75 inches wide x 78 inches long. -"DLAD clause 52.247-9012

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

PAGE 10 OF 86 PAGES

SPE8E6-25-R-0003

SECTION B

SUPPLY/SERVICE: 5450-01-618-1038 CONT'D

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

RD003, COVERED DEFENSE INFORMATION MAY APPLY

THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT

DLA DURING "OPEN SOLICITATION ONLY".

TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>

FOR EBS SOLICITATIONS USE URL

HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/

REVISION NR 1 DTD 05/07/2024

PART PIECE NUMBER: MILDTL32488-2B

IAW REFERENCE QAP 13873 EQ003

REVISION NR D DTD 02/09/2023

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-129R(3)

REVISION NR R DTD 02/25/2023

PART PIECE NUMBER:

IAW REFERENCE QAP 14153 MIL-DTL-32488

REVISION NR DTD 01/29/2019

PART PIECE NUMBER:

IAW REFERENCE QAP 14153 SQAP-FAT3

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS%

PAGE 11 OF 86 PAGES

SPE8E6-25-R-0003

SECTION B

SUPPLY/SERVICE: 5450-01-618-1038 CONT'D

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0003 5450-01-618-1038 7,189.000 EA $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 45 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND

ITEM PR PRLI PR PRLI Material Need Ship Date .

0003 1000199985 0003 N/A N/A N/A N/A

SUPPLIES/SERVICES: 5450-01-618-1041

WALL,PROTECTIVE,RAPID Expeditionary Barrier System (EBS) In accordance with MIL-DTL-32488 Type 2, Class G, Contractor Notes: -Each individual EBS shall include a sufficient number of hog rings, bagged and firmly attached. -Wood Pallets shall be in compliance with MIL-STD-147.

Wrapping material shall be non-transparent that blocks UV and weather exposure. Labeling shall be in accordance with MIL-STD-129. -Lot and batch bare item markings will be applied on each U/I. Lot and batch markings will be placed on U/I were it is visible doing storage and when item is erected -Quantity per pallet: 120 -Overall pallet size: 33 inches high x 75 inches wide x 78 inches long. -"DLAD clause 52.247-9012

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

PAGE 12 OF 86 PAGES

SPE8E6-25-R-0003

SUPPLY/SERVICE: 5450-01-618-1041 CONT'D

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

REVISION NR 1 DTD 05/07/2024

PART PIECE NUMBER: MILDTL32488-2G

IAW REFERENCE QAP 13873 QAP-EQ003

REVISION NR D DTD 02/09/2023

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-129R(3)

REVISION NR R DTD 02/25/2023

PART PIECE NUMBER:

IAW REFERENCE QAP 14153 MIL-DTL-32488

REVISION NR DTD 01/29/2019

PART PIECE NUMBER:

IAW REFERENCE QAP 14153 SQAP-FAT3

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS%

0004 5450-01-618-1041 1.000 EA $ ________________ $ ________________

PAGE 13 OF 86 PAGES

SPE8E6-25-R-0003

SECTION B

SUPPLY/SERVICE: 5450-01-618-1041 CONT'D

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 45 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND

ITEM PR PRLI PR PRLI Material Need Ship Date .

0004 1000199985 0004 N/A N/A N/A N/A

SUPPLIES/SERVICES: 5450-01-618-1046

with MIL-DTL-32488 Type 3, Class B, Contractor Notes: -Each individual EBS shall include a sufficient number of hog rings, bagged and firmly attached. -Wood Pallets shall be in compliance with MIL-STD-147.

Wrapping material shall be non-transparent that blocks UV and weather exposure. Labeling shall be in accordance with MIL-STD-129.

-Lot and batch bare item markings will be applied on each U/I. Lot and batch markings will be placed on U/I were it is visible doing storage and when item is erected -Quantity per pallet: 8 -Overall pallet size:

70 inches high x 46 inches wide x 46 inches long. -"DLAD clause 52.247-9012 Requirements for Treatment of Wood Packaging Material (WPM) applies".

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

PAGE 14 OF 86 PAGES

SPE8E6-25-R-0003

SECTION B

SUPPLY/SERVICE: 5450-01-618-1046 CONT'D

REVISION NR 1 DTD 05/07/2024

PART PIECE NUMBER: MILDTL32488-3B

IAW REFERENCE QAP 13873 QAP-EQ003

REVISION NR D DTD 02/09/2023

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-129R(3)

REVISION NR R DTD 02/25/2023

PART PIECE NUMBER:

IAW REFERENCE QAP 14153 MIL-DTL-32488

REVISION NR DTD 01/29/2019

PART PIECE NUMBER:

IAW REFERENCE QAP 14153 SQAP-FAT3

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS%

0005 5450-01-618-1046 712.000 EA $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 45 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA-QUP:001

PAGE 15 OF 86 PAGES

SPE8E6-25-R-0003

SUPPLY/SERVICE: 5450-01-618-1046 CONT'D

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND

ITEM PR PRLI PR PRLI Material Need Ship Date .

0005 1000199985 0005 N/A N/A 5670016181046 N/A

SUPPLIES/SERVICES: 5450-01-618-1054

with MIL-DTL-32488 Type 3, Class G, Contractor Notes: -Each individual EBS shall include a sufficient number of hog rings, bagged and firmly attached. -Wood Pallets shall be in compliance with MIL-STD-147.

Wrapping material shall be non-transparent that blocks UV and weather exposure. Labeling shall be in accordance with MIL-STD-129.

-Lot and batch bare item markings will be applied on each U/I. Lot and batch markings will be placed on U/I were it is visible doing storage and when item is erected -Quantity per pallet: 8 -Overall pallet size:

70 inches high x 46 inches wide x 46 inches long. -"DLAD clause 52.247-9012 Requirements for Treatment of Wood Packaging Material (WPM)

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

PAGE 16 OF 86 PAGES

SPE8E6-25-R-0003

SECTION B

SUPPLY/SERVICE: 5450-01-618-1054 CONT'D

REVISION NR 1 DTD 05/07/2024

PART PIECE NUMBER: MILDTL32488-3G

IAW REFERENCE QAP 13873 QAP-EQ003

REVISION NR D DTD 02/09/2023

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-129R(3)

REVISION NR R DTD 02/25/2023

PART PIECE NUMBER:

IAW REFERENCE QAP 14153 MIL-DTL-32488

REVISION NR DTD 01/29/2019

PART PIECE NUMBER:

IAW REFERENCE QAP 14153 SQAP-FAT3

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS%

0006 5450-01-618-1054 10.000 EA $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 45 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PAGE 17 OF 86 PAGES

SPE8E6-25-R-0003

SECTION B

SUPPLY/SERVICE: 5450-01-618-1054 CONT'D

FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND

ITEM PR PRLI PR PRLI Material Need Ship Date .

0006 1000199985 0006 N/A N/A N/A N/A

SUPPLIES/SERVICES: 5670-01-618-1064

WALL,PROTECTIVE,RAP

Expeditionary Barrier System (EBS) In accordance with MIL-DTL-32488 Type 4, Class B<(>,<)> Contractor Notes:

-Each individual EBS shall include a sufficient number of hog rings, bagged and firmly attached.

-Wood Pallets shall be in compliance with MIL-STD-147. Wrapping material shall be non-transparent that blocks UV and weather exposure. Labeling shall be in accordance with MIL-STD-129.

-Lot and batch bare item markings will be applied on each U/I. Lot and batch markings will be placed on U/I were it is visible doing storage and when item is erected -Quantity per pallet: 8 -Overall pallet size: 67 inches high x 41 inches wide x 105 inches long.

-"DLAD clause 52.247-9012 Requirements for Treatment of Wood Packaging Material (WPM) applies".

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

(CIDS) MAY BE OBTAINED FROM THE WEB SITE

http://quicksearch.dla.mil/

THIS NSN IS PROCURED AS FULLY COMPETITIVE IN

ACCORDANCE WITH A MILITARY / FEDERAL

PAGE 18 OF 86 PAGES

SPE8E6-25-R-0003

SECTION B

SUPPLY/SERVICE: 5670-01-618-1064 CONT'D

IAW BASIC SPEC NR MIL-DTL-32488(1) NOT 1

REVISION NR DTD 05/07/2024

PART PIECE NUMBER: MILDTL32488-4B

IAW REFERENCE QAP 13873 EQ003

REVISION NR D DTD 02/09/2023

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-129R(3)

REVISION NR R DTD 02/25/2023

PART PIECE NUMBER:

IAW REFERENCE QAP 14153 MIL-DTL-32488

REVISION NR DTD 01/29/2019

PART PIECE NUMBER:

IAW REFERENCE QAP 14153 SQAP-FAT3

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS%

0007 5670-01-618-1064 3,305.000 EA $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 45 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND

PAGE 19 OF 86 PAGES

SPE8E6-25-R-0003

SUPPLY/SERVICE: 5450-01-618-1069 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0007 1000199985 0007 N/A N/A 5450016181064 N/A

SUPPLIES/SERVICES: 5450-01-618-1069

with MIL-DTL-32488 Type 4, Class G, Contractor Notes: -Each individual EBS shall include a sufficient number of hog rings, bagged and firmly attached. -Wood Pallets shall be in compliance with MIL-STD-147.

Wrapping material shall be non-transparent that blocks UV and weather exposure. Labeling shall be in accordance with MIL-STD-129. -Lot and batch bare item markings will be applied on each U/I. Lot and batch markings will be placed on U/I were it is visible doing storage and when item is erected -Quantity per pallet: 8 -Overall pallet size: 67 inches high x 41 inches wide x 105 inches long. -"DLAD clause 52.247-9012 Requirements for Treatment of Wood Packaging Material (WPM) applies".

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

REVISION NR 1 DTD 05/07/2024

PART PIECE NUMBER: MILDTL32488-4G

IAW REFERENCE QAP 13873 QAP-EQ003

REVISION NR D DTD 02/09/2023

IAW REFERENCE STD NR MIL-STD-129R(3)

PAGE 20 OF 86 PAGES

SPE8E6-25-R-0003

SECTION B

SUPPLY/SERVICE: 5450-01-618-1069 CONT'D

REVISION NR R DTD 02/25/2023

PART PIECE NUMBER:

IAW REFERENCE QAP 14153 MIL-DTL-32488

REVISION NR DTD 01/29/2019

PART PIECE NUMBER:

IAW REFERENCE QAP 14153 SQAP-FAT3

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS%

0008 5450-01-618-1069 1.000 EA $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 45 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND

ITEM PR PRLI PR PRLI Material Need Ship Date .

0008 1000199985 0008 N/A N/A N/A N/A

SUPPLIES/SERVICES: 5450-01-618-1074

PAGE 21 OF 86 PAGES

SPE8E6-25-R-0003

SECTION B

SUPPLY/SERVICE: 5450-01-618-1074 CONT'D

ITEM DESCRIPTION:

WALL,PROTECTIVE,RAPID Expeditionary Barrier System (EBS) In accordance with MIL-DTL-32488 Type 5, Class B, Contractor Notes: -Each individual EBS shall include a sufficient number of hog rings, bagged and firmly attached. -Wood Pallets shall be in compliance with MIL-STD-147.

Wrapping material shall be non-transparent that blocks UV and weather exposure. Labeling shall be in accordance with MIL-STD-129. -Lot and batch bare item markings will be applied on each U/I. Lot and batch markings will be placed on U/I were it is visible doing storage and when item is erected -Quantity per pallet: 50 -Overall pallet size: 33 inches high x 75 inches wide x 78 inches long. -"DLAD clause 52.247-9012

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

REVISION NR 1 DTD 05/07/2024

PART PIECE NUMBER: MILDTL32488-5B

IAW REFERENCE QAP 13873 QAP-EQ003

REVISION NR D DTD 02/09/2023

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-129R(3)

REVISION NR R DTD 02/25/2023

PART PIECE NUMBER:

IAW REFERENCE QAP 14153 MIL-DTL-32488

REVISION NR DTD 01/29/2019

PART PIECE NUMBER:

IAW REFERENCE QAP 14153 SQAP-FAT3

PAGE 22 OF 86 PAGES

SPE8E6-25-R-0003

SECTION B

SUPPLY/SERVICE: 5450-01-618-1074 CONT'D

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.

https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS%

0009 5450-01-618-1074 3,536.000 EA $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 45 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND

ITEM PR PRLI PR PRLI Material Need Ship Date .

0009 1000199985 0009 N/A N/A N/A N/A

SUPPLIES/SERVICES: 5450-01-618-1101

with MIL-DTL-32488 Type 5, Class G, Contractor Notes: -Each individual EBS shall include a sufficient number of hog rings, bagged and firmly attached. -Wood Pallets shall be in compliance with MIL-STD-147.

Wrapping material shall be non-transparent that blocks UV and weather exposure. Labeling shall be in accordance with MIL-STD-129. -Lot and batch bare item markings will be applied on each U/I. Lot and batch markings will be placed on U/I were it is visible doing storage and when item is erected -Quantity per pallet: 50 -Overall pallet size: 33 inches high x 75 inches wide x 78 inches long. -"DLAD clause 52.247-9012

PAGE 23 OF 86 PAGES

SPE8E6-25-R-0003

SUPPLY/SERVICE: 5450-01-618-1101 CONT'D

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

REVISION NR 1 DTD 05/07/2024

PART PIECE NUMBER: MILDTL32488-5G

IAW REFERENCE QAP 13873 QAP-EQ003

REVISION NR D DTD 02/09/2023

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-129R(3)

REVISION NR R DTD 02/25/2023

PART PIECE NUMBER:

IAW REFERENCE QAP 14153 MIL-DTL-32488

REVISION NR DTD 01/29/2019

PART PIECE NUMBER:

IAW REFERENCE QAP 14153 SQAP-FAT3

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS%

0010 5450-01-618-1101 57.000 EA $ ________________ $ ________________

PAGE 24 OF 86 PAGES

SPE8E6-25-R-0003

SECTION B

SUPPLY/SERVICE: 5450-01-618-1101 CONT'D

PRICING TERMS: Firm Fixed Price

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 45 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and…