SF1449_SPE1C121R0088.pdf

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30 1000127751

1. REQUISITION NUMBER

2. CONTRACT NO. 3. AWARD/EFFECTIVE

DATE

4. ORDER NUMBER

SPE1C1-21-R-0088

5. SOLICITATION NUMBER

2021 AUG 19

6. SOLICITATION ISSUE

DATE

Marcia Henson DMH0098

a. NAME

Phone: DSN215-737-25

b. TELEPHONE NUMBER (No Collect calls)

2021 SEP 21

8. OFFER DUE DATE/

LOCAL TIME

9. ISSUED BY CODE SPE1C1

DLA TROOP SUPPORT

C AND T SUPPLY CHAIN

700 ROBBINS AVENUE

PHILADELPHIA PA 19111-5096

USA

10. THIS ACQUISITION IS 100UNRESTRICTED OR SET ASIDE: % FOR:

SMALL BUSINESS

HUBZONE SMALL

BUSINESS

WOMEN-OWNED SMALL BUSINESS

(WOSB) ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

8 (A)

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

315210NAICS:

750SIZE STANDARD:

11. DELIVERYFOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

12. DISCOUNT TERMS

13a. THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700)

13b. RATING

14. METHOD OF SOLICITATION

RFQ IFB RFP

15. DELIVER TO CODE 16. ADMINISTERED BY CODE

17a. CONTRACTOR/ CODE

OFFEROR

FACILITY

CODE

TELEPHONE NO.

18a. PAYMENT WILL BE MADE BY CODE

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

See Schedule

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Govt. Use Only)

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA ARE ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED

29. AWARD OF CONTRACT: REF. OFFER

DATED . YOUR OFFER ON SOLICITATION

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30b. NAME AND TITLE OF SIGNER (Type or Print) 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (Type or Print) 31c. DATE SIGNED

SEE SCHEDULE

7. FOR SOLICITATION

INFORMATION CALL:

SEE SCHEDULE

03:00 PM

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA - FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE ADDENDUM

EDWOSB

32a. QUANTITY IN COLUMN 21 HAS BEEN

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED:RECEIVED INSPECTED

COMPLETE PARTIAL FINAL

STANDARD FORM 1449 (REV. 2/2012) BACK

36. PAYMENT

PARTIAL FINAL

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32f. TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

33. SHIP NUMBER 34. VOUCHER NUMBER 35. AMOUNT VERIFIED

CORRECT FOR

37. CHECK NUMBER

38. S/R ACCOUNT NO. 39. S/R VOUCHER NUMBER 40. PAID BY

42a. RECEIVED BY (Print)

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE

42b. RECEIVED AT (Location)

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 3 OF 111 PAGES

CONTINUED ON NEXT PAGE

SPE1C1-21-R-0088

Form

Continuation of Blocks from SF 1449

1. Block 8

Offer Due Date/Local Time: September 21, 2021

Solicitation Number: SPE1C1-21-R-0088 Opening/Closing Date and Time: August 19, 2021 / September 21, 2021 @ 3:00 PM, local (Philadelphia) time

NOTE: IT IS A REQUIREMENT THAT ALL PROPOSALS, MODIFICATIONS, AND WITHDRAWALS BE

PLAINLY MARKED ON THE OUTERMOST ENVELOPE WITH THE SOLICITATION NUMBER, CLOSING

DATE AND TIME SET FOR THE RECEIPT OF PROPOSALS. FAILURE TO COMPLY WITH THIS

REQUIREMENT MAY RESULT IN AN OFFEROR'S PROPOSAL NOT BEING PROCESSED PROPERLY AND

ULTIMATELY REJECTED AS UNTIMELY IN ACCORDANCE WITH FEDERAL ACQUISITION

REGULATIONS (“FAR”) CLAUSE 52.212-1(f).

FOR THIS SOLICITATION ONLY:

Technical Proposal will be accepted via Email only.

Technical Proposals (documents) WILL NOT be accepted via mail or hand-carried (UPS, FedEx, DHL etc…) or hand-carried in-person delivery.

FOR THIS SOLICITATION ONLY:

Email offers for Technical Proposals will be accepted.

Guidance for email offers for Technical Proposals is as follows:

Entire Technical Proposal documents must be returned.

a. This includes entire solicitation document (all pages) with appropriate clauses filled in; Place of Performance (all places of performance) including name and address of location filled out; Qualified Laboratory and Source Sampling Name and address filled out; and Identification of Sources for All Components for Clothing/Textile Items filled out.

b. Prices must be filled out for all items and all terms (Base term and Option terms if Option terms apply).

c. Vendor's record of Past Performance must be returned with complete information provided in accordance with Section L of subject solicitation.

Transmit “email” offers (if authorized; see “Addendum” to 52.212-1(b)) or offer modifications/withdrawals to: Donna Kuzma-Streibich at: donna.streibich@dla.mil , and Marcia Henson at: Marcia.Henson@dla.mil Please send emailed offers to all of the authorized email addresses listed above (on the same email) to ensure that your proposal is received.

NOTE: Email servers may have a lag time. There may be a lag time between the date/time stamp the offeror submits offer via email versus the date/time stamp that offer is received by the authorized email address. Lag times WILL NOT be considered. Any Technical Proposal and any correspondence that is received with a date/time stamp beyond the closing date and time of subject solicitation shall be considered late and shall not be accepted or considered.

NOTE: For this solicitation, DIBBS is NOT an authorized method of submitting an offer.

mailto:donna.streibich@dla.mil mailto:Marcia.Henson@dla.mil

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 4 OF 111 PAGES

Form (CONTINUED)

Email submission for offers (technical proposal) is the only accepted transmission for this solicitation.

PDM SUBMISSION:

Product Demonstration Models are required to be submitted through traceable means via mail or UPS, FedEx, DHL etc…(ie commercial carriers). PDMs cannot be submitted electronically through DIBBS email and cannot be delivered via hand carried in-person.

If a Product Demonstration Model is not received by date and time of the closing, your offer will be considered incomplete and entire offer will be rejected. The time for receipt of offer is 3:00 P.M. Eastern Standard Time (Philadelphia time), or when applicable, Eastern Daylight Savings Time on the return date.

A vendor's inability to submit an offer caused by failure of a vendor's hardware, software, Internet Service Provider, or the World Wide Web itself, is not cause for extension of a solicitation.

If an offeror chooses to submit a response to the solicitation electronically and through other allowed means per the solicitation, the later dated version for that offeror will be what the Government will evaluate as your latest offer.

FOR THIS SOLICITATION ONLY:

Only PDMs will be accepted via mail or via UPS, FedEx, DHL etc…(ie commercial carriers). Make sure the commercial carrier and driver has privileges to enter the Military Base.

NO PDMs will be accepted via “hand-carried” in-person delivery to the Business Opportunities Office (BOO)

2. Block 9 Address and Submit “mailed”* proposals to:

Defense Logistics Agency DLA Troop Support Post Office Box 56667 Philadelphia, PA 19111-6667

Opening/Closing Date and Time: August 19, 2021/September 21, 2021 @ 3:00 PM, local (Philadelphia) time

* “MAILED PROPOSAL” applies in the circumstance where a proposal is sent via the United States Postal Service (USPS), including any of the individual mailing services offered by the USPS (i.e. First-Class Mail, Priority Mail, Priority Mail Express, etc.).

› Address and Deliver “hand-carried” proposals, including delivery by commercial carrier, shall be sent and delivered to the following address:

DLA Troop Support Business Opportunities Office

Bldg. 45, 1st Floor, Wing C, Room 167 700 Robbins Avenue Philadelphia, PA 19111-5092

Make sure the commercial carrier and driver has privileges to enter the Military Base.

Opening/Closing Date and Time: August 19, 2021/September 21, 2021 @ 3:00 PM, local (Philadelphia) time

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 5 OF 111 PAGES

* “HAND-CARRIED PROPOSAL” applies when the offeror intends to deliver its proposal in-person directly to the Business Opportunities Office (“BOO”) at the address above. NOT ACCEPTED FOR THIS SOLICITATION

* “HAND-CARRIED PROPOSAL” Further, the above address is also applicable when the offeror submits its proposal via a commercial carrier (e.g., UPS, FedEx, DHL, etc.). COMMERCIAL CARRIERS WILL BE ACCEPTED FOR

THIS SOLICITATON FOR PDMS ONLY.

Notes:

NOTE REGARDING “HAND-CARRIED PROPOSALS:”

1. All hand-carried proposals are to be delivered to the Business Opportunities Office between 8:00 a.m. and 5:00 p.m. ET, Monday through Friday, except for federal holidays as set forth in 5 United States Code Section 6103. Offerors using a commercial carrier service must ensure that the carrier “hand-carries” the package to the Business Opportunities Office specified above for hand-carried proposals prior to the instant Solicitation's closing date and time. As previously stated, the hand-carried proposal's package must be plainly marked on the OUTSIDE OF THE COMMERCIAL CARRIER'S ENVELOPE with the solicitation number, closing date and time set forth for receipt of proposals as indicated in Block 8 of the Standard Form 1449 (Page 1 of Solicitation).

2. An offeror intending to deliver its proposal in-person is advised that the Business Opportunities Office (also referred to as the “Bid Room”) is located within a secure military installation. In order to gain access to the Business Opportunities Office, an escort may be required. The escort will be an employee of the Business Opportunities Office. The following are telephone numbers for the Business Opportunities Office: (215) 737-8511, 9044, 7354, 0317, and 8566 . Upon arriving at the security office, the offeror should call the Business Opportunities Office in order to obtain an escort. An offeror is advised to allow sufficient time to complete delivery of hand-carried proposals. Since the length of time necessary to gain access to the Business Opportunities Office varies based on a number of circumstances, it is recommended that an offeror arrive at the installation at least one hour prior to the time that the solicitation closes to allow for security processing and to secure an escort. PLEASE NOTE THAT THIS ADVISORY IS A SUGGESTION

AND DOES NOT GUARANTEE THAT AN OFFEROR WILL GAIN ACCESS TO THE BUSINESS

OPPORTUNITIES OFFICE IF IT ARRIVES ONE HOUR BEFORE THE PROPOSAL IS DUE. Ultimately, it is the offeror's responsibility to ensure that its proposal is received at the correct location at the correct time. Failure to do so may result in the offeror's proposal being deemed untimely and not considered further for the award per FAR 52.212-1 (f).

NOTE: Point 2 WILL NOT ACCEPTED FOR THIS SOLICITATION. NO HAND CARRIED TECHNICAL PROPOSALS OR PDMS WILL BE ACCEPTED VIA AN “IN-PERSON” DELIVERY TO THE BUSINESS OPPROTUNITIES OFFICE.

**PDMs SHALL ONLY BE DELIVERED VIA A COMMERICAL CARRIER (via UPS, FedEx, DHL etc…) OR or the United States Postal Service (USPS).**

3. Examples of “hand-carried” offers include: In-person delivery by contractor, Fed Ex, Airborne, UPS, DHL, Emery, other commercial carrier, USPS Express Mail, and USPS Certified Mail.

› Transmit “facsimile” offers (if authorized; see “Addendum” to 52.212-1(b)) or offer modifications/withdrawals to: (215) 737-9300, 9301, 9302 or 9303. Facsimile offers shall NOT be considered at this time.

NOTE: For this solicitation, DIBBS is NOT an authorized method of submitting an offer.

3. Block 17a

› Offeror's assigned Data Universal Numbering System (DUNS) Number: ______________ (If you do not have a DUNS number, contact the individual identified in Block 7a of the SF 1449 or see 52.212-1, Instructions to Offerors --Commercial Items (paragraph j) for information on contacting Dun and Bradstreet.)

› Offeror's assigned Contractor and Government Entity (CAGE) Code: _________________

4. Block 17b

Remittance Address: (if different from Contractor/Offeror address in block 17a of the SF 1449.)

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 6 OF 111 PAGES

SPE1C1-21-R-0088

Form (CONTINUED)

5. Are you registered in the System for Award Management (SAM.gov)? ( ) YES ( ) NO

CAUTION NOTICE

Offerors are cautioned that all components must be of domestic origin in compliance with clause 252.225-7012, Preference for Certain Domestic Commodities (DEC 2017), as contained in this solicitation.

Section 833 of the National Defense Authorization Act for Fiscal Year 2006 added language to 10 U.S.C. 2533a, requiring that all articles or items of "clothing,” including the materials and components thereof, purchased by the Department of Defense be grown, reprocessed, reused, or produced in the United States, other than sensor, electronics or other items added to, and not normally associated with, clothing (and the materials and components thereof).

Very Important: The vendor must certify their agreement to these terms by signing the certification located in Section K of this solicitation.

Very Important: Solicitation SPE1C1-21-R-0088will be issued as a 100% SMALL BUSINESS SET-ASIDE.

The Undershirt, White, Crew Neck is classified under Federal Supply Classification (FSC) Code 8420. In accordance with DFARS 208.602-70, as implemented by Section 872 of the National Defense Authorization Act for Fiscal Year 2008, the Department of Defense (DoD) publishes an annual list of product categories for which the Federal Prison Industries' (FPI) share of the DoD market is greater than five percent, (5%), which is considered a significant market share and must be competed. FSC 8420 is currently identified on this list and FPI is considered to have a significant market share. In accordance with 8.602(a)(4), agencies shall include Federal Prison Industries, Inc. (FPI), in the solicitation process and consider a timely offer from FPI.

The Government intends to make an award for the purchase of the item Undershirt, White, Crew Neck, Each, PGC: 00312;

NSN: 8420-00-540-6643(s), 2 Pack, PGC: 00036; NSN: 8420-01-669-0442(s) and 3 Pack, PGC: 02768; NSN:

8420-01-495-1949(s) under this solicitation. Orders will be issued in accordance with the terms and conditions of the contract and without notice to, or consideration of, any other contractor, or consideration of the terms and conditions of any other contract. The fair opportunity provisions of FAR 16.505(b) will not be applicable to orders under the resulting contract(s).

BEST VALUE TRADEOFF ACQUISITION WITH ADJECTIVAL RATING PDMS

For this solicitation, PDM and Past Performance will be reviewed. Aspects of Past Performance are Recency, Relevancy and Quality. Included in the Quality sub-factor will be Quality and Delivery Performance. These sub-factors will be combined to arrive at an overall Performance Confidence Assessment. Technical merit and Past Performance are more important than price.

1. Best Value Source Selection Trade-Off Procedures Source Selection procedures will be utilized for this solicitation.

“Best Value” evaluation will be employed using the following evaluation factors: Product Demonstration Model (PDM), Past Performance and Price.

All PDMs will be evaluated using adjectival ratings in accordance with the criteria outlined in the solicitation. There will be no allowable re-submittals for PDM (Product Demonstration Model).

2. The Government will also review the second evaluation factor: Past Performance. The Government intends to award to the firm who is the best value to the Government with regard to passing PDMs, and acceptable Past Performance and Price. Passing PDMs and Past Performance when combined are more important than cost or price. As other evaluation factors become more equal, the evaluated price becomes more important. From among the firms with Passing PDMs, CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 7 OF 111 PAGES

SPE1C1-21-R-0088

Form (CONTINUED) the Government will then select the responsible firm that complies with terms and conditions of the solicitation, and an award to that firm is considered in the best interest of the Government. If the firm fits these criteria, award will be made to them. If not, the Government will review each subsequent technically acceptable offer until one is identified that does meet the criteria, in which case award will be made to that firm.

NOTE: A rating of Unacceptable for PDM will result in the offer being removed from award consideration and the proposal will not be reviewed any further.

A rating of Marginal for PDM may result in the offer being removed from award consideration and the proposal will not be reviewed any further.

NOTE: The Government reserves the right to evaluate past performance up until award.

3. This solicitation will contain a Two-Phase Technical/Price Evaluation.

The Government anticipates that numerous offerors will submit proposals on this solicitation. In the event that eight or more proposals are received, the Government may use a two-phase evaluation process, which allows the Contracting Officer to conduct a preliminary evaluation of all offers, in order to determine which offers are the least likely to be candidates for further consideration. During this preliminary evaluation, all offerors Product Demonstration Models (PDMs) and proposed prices will be evaluated. Certain offerors may be excluded from further consideration at this point, if their PDM ratings and/or offered prices are not competitive when compared with PDM ratings and prices proposed by other offerors. The remaining offers will then be evaluated for the remaining technical and past performance evaluation factors. After the completion of this review, the contracting officer will determine whether to establish a competitive range and enter into negotiations, or to award without discussions.

4. The Government reserves the right to conduct negotiations with a competitive range group of offerors from among firms with most highly rated offers. If negotiations are conducted, award will be made to the offeror (based on final proposal revision) that is the best value to the Government, has a passing PDM or better, and is determined responsible and compliant with the solicitation terms and conditions based on an “integral assessment of PDM, Past Performance and Price".

Section B Supplies/Services

Solicitation SPE1C1-21-R-0088 will be issued as a Best Value, Trade Off and Source Selection Procedures will be utilized. The Government intends to make ONE (1) award on this solicitation, based upon an integrated assessment of PDM, Past Performance, and Price resulting in the best value to the Government.

Solicitation SPE1C1-21-R-0088 will be issued as a 100% SMALL BUSINESS SET-ASIDE.

PLEASE NOTE: The Undershirt, White, Crew Neck is classified under Federal Supply Classification (FSC) Code 8420. The Department of Defense (DoD) publishes an annual list of product categories for which the Federal Prison Industries' (FPI) share of the DoD market is greater than five percent, which is considered a significant market share and must be competed. FSC 8420 is currently identified on this list, FPI is considered to have a significant market share. In accordance with 8.602(a)(4), agencies shall include Federal Prison Industries, Inc. (FPI), in the solicitation process and consider a timely offer from FPI.

There are four (4) ONE-YEAR OPTION TERMS for this solicitation. You are required to offer on the OPTION YEARS as well as the BASE ORDERING TERM. Failure to do so will result in the REJECTION OF YOUR ENTIRE PROPOSAL.

Refer to Section “L” & “M”. Technical and Past Performance proposals are required to be submitted since this is a BEST VALUE SOURCE SELECTION ACQUISITION. Failure to submit a technical and Past Performance proposal may result in rejection of your entire offer.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 8 OF 111 PAGES

SPE1C1-21-R-0088

Form (CONTINUED)

RFID is required at item, case and pallet for the ship-to destination

Undershirt, White, Crew Neck, Each, PGC: 00312 - Travis Association for the Blind, Austin TX and Peckham Inc, Lansing, MI Undershirt, White, Crew Neck, 2 Pack, PGC: 00036 - Pendergrass Distribution Center, Pendergrass, GA Undershirt, White, Crew Neck, 3 Pack, PGC: 00312 - Peckham Inc, Lansing, MI

Inspection & Acceptance is at Origin The Government intends to make ONE award for the purchase of the Undershirt, White, Crew Neck, Each, 2 Pack and 3 Pack.

For the period of performance, the quantity limitations for this solicitation and resulting contract are as follows:

Each - PGC: 00312; NSN: 8420-00-540-6643(s) 2 Pack - PGC: 00036; NSN: 8420-01-669-0442(s) 3 Pack - PGC: 02768; NSN: 8420-01-495-1949(s)

****ANY COMBINATION****

Minimum Quantity: _______ __231,800 EA (Each) Annual Est. Ordering Quantity: __ 927,136 EA (Each) Maximum Quantity: __ _ 1,205,300 EA (Each)

**The minimum and maximum values covering the period of performances are separate for the initial basic and each option period.

Acceleration of delivery is not authorized unless permitted in writing by the Contracting Officer on a delivery order basis via a modification.

The unit prices are required to be based on FOB Destination. Inspection and Acceptance is at Origin. See Section F for a sample delivery order.

The Government reserves the right to change Inspection and Acceptance to Destination should the Government determine a need and it is in its best interest.

First Article submission is hereby waived.

The Government reserves the right to require pre-production samples. The Government reserve the right to require First lot samples should the Government determine a need.

The production lead-time for the first delivery order will be 120 days. The subsequent delivery orders will have a production lead-time of 90 days.

NOTE: Once the contract has been awarded, the contractor will be required to contact the Contracting Officer in writing 10 days before the first lot is ready for presentation for inspection at the manufacturing facility.

Offers will be evaluated based on the Evaluative Quantity, which is based on the maximum quantity. The Government reserves the right to make an award on initial offers received; therefore, your best offer should be submitted. Offerors are required to offer a unit price for the specified items for the base year period and the four (4) one-year option periods. Acceptance of the option provision contained here for the subject items is mandatory. See Clause 52.217-5. Offers that do not include acceptance of the option provision or do not contain offers on the options will not be considered.

By submitting prices for this solicitation, you are indicating capacity to supply the maximum quantity for the item.

NOTE: The delivery schedule, quantities, and sizes will be set forth in individual orders. The quantity at time of award will be

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 9 OF 111 PAGES

SPE1C1-21-R-0088

Form (CONTINUED) determined by using the current demand.

The Government reserves the right to perform conversions under the resultant contract(s), should the Government determine a need.

TWO (2) EACH PDMs are required for the UNDERSHIRT, WHITE, CREW NECK in SIZE MEDIUM. SIZE MUST BE INDICATED ON THE LABEL. PDMs must be submitted for every intended place of performance, including all proposed subcontractors. PDMs will be evaluated for visual, manufacturing, dimensional requirements.

Evaluation of the PDMs will effectively indicate the contractor's ability to manufacture the items in accordance with the Government's quality standards. First Article provisions will not be included in this acquisition due to the PDM requirement.

Please see text under title, Instructions for Submitting Product Demonstration Models (PDM) To DLA Troop Support in sections L and M of this solicitation. CAUTION: The PDMs may only be furnished with the offeror's proposal at the time and date of the initial closing of the solicitation. Subsequent submissions will not be permitted, even if deficiencies exist in the submitted PDMs. Therefore, the offeror must furnish its best effort with their proposal. Correction of the PDMs will not be accepted by the Government.

Failure to submit the required PDMs will result in rejection of your entire offer.

TWO (2) EACH PDMs are required for the UNDERSHIRT, WHITE, CREW NECK, in SIZE MEDIUM. SIZE MUST BE INDICATED ON THE LABEL. PDMs must be submitted for every intended place of performance, including all proposed subcontractors.

Very Important: For this solicitation, alternate materials will NOT be allowed. In order to insure that the contractor is able to manufacture the item, the specified materials outlined in the Commercial Item Description A-A-50013G, dated 15 September 2009 must be used.

Please see Instructions for Submitting Product Demonstration Models, in section L and M of this solicitation. CAUTION: The PDMs may only be furnished with the offeror's proposal at the time and date of the initial closing of the solicitation. Subsequent submissions will not be permitted, even if deficiencies exist in the submitted PDM's. Therefore, the offeror must furnish its best effort with their proposal. Correction of the PDMs will not be accepted by the Government.

DLA Troop Support has developed a web-based system that allows manufacturers the ability to request specifications, PATTERNS and drawings on our contracting page. To request technical data for DLA Troop Support Clothing and Textiles (DLA C&T) solicitations, use the following link to the DLA C&T Technical Data Repository area at http://www.dla.mil/ TroopSupport/ClothingandTextiles/SpecRequest.aspx.

Section B Supplies/Services

TOTAL QUANTITY

ITEM: Undershirt, White, Crew Neck, Each, 2 Pack and 3 Pack Each - PGC: 00312; NSN: 8420-00-540-6643(s) 2 Pack - PGC: 00036; NSN: 8420-01-669-0442(s) 3 Pack - PGC: 02768; NSN: 8420-01-495-1949(s)

****ANY COMBINATION****

http://www.dla.mil/TroopSupport/ClothingandTextiles/SpecRequest.aspx http://www.dla.mil/TroopSupport/ClothingandTextiles/SpecRequest.aspx

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 10 OF 111 PAGES

SPE1C1-21-R-0088

Form (CONTINUED)

*Price will be evaluated at the evaluation quantity* ALL PRICES ARE TO BE BASED ON FOB DESTINATION ONLY. The successful awardee is responsible for all transportation costs.

The evaluative quantity below is based on the maximum quantity. Please submit unit price each. Price should be an EACH price.

Package price will be calculated by the Contracting Office for the contract (each price x 2 units and each price x 3).

ITEM: Undershirt, White, Crew Neck, Each, 2 Pack and 3 Pack Each - PGC: 00312; NSN: 8420-00-540-6643(s) 2 Pack - PGC: 00036; NSN: 8420-01-669-0442(s) 3 Pack - PGC: 02768; NSN: 8420-01-495-1949(s)

Undershirt, White, Crew Neck

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 111 PAGES

SPE1C1-21-R-0088

Form (CONTINUED)

SEE SECTION F FOR ESTIMATED FIRST DELIVERY ORDER.

THIS ACQUISITION WILL RESULT IN AN INDEFINITE QUANTITY TYPE CONTRACT WITH A BASE YEAR TERM

AND FOUR (4) ONE YEAR OPTION TERMS.

ANNUAL ESTIMATED QUANTITY (AEQ) FOR THE BASE YEAR AND ALL FOUR OPTION YEARS IS 927,136 Each.

THE GOVERNMENT IS NOT BOUND TO ORDER MORE THAN THE MINIMUM QUANTITY INDICATED ABOVE.

DELIVERY ORDERS WILL BE PLACED VIA DD FORM 1155.

ALL PRICES ARE TO BE BASED ON FOB DESTINATION ONLY.

FIRST ARTICLE SUBMISSION IS HEREBY WAIVED.

THE GOVERNMENT RESERVES THE RIGHT TO REQUEST PRODUCTION SAMPLES.

DELIVERY ORDERS MAY REQUIRE CONCURRENT DELIVERIES; HOWEVER, THE

GOVERNMENT WILL NOT REQUIRE THE DELIVERY OF MORE THAN 133,925 EA.

IN ANY GIVEN THIRTY DAY PERIOD.

[X] EFFECTIVE PERIOD - INDEFINITE DELIVERY CONTRACT

THE EFFECTIVE PERIOD OF THIS CONTRACT IS FROM THE DATE OF AWARD

THROUGH FINAL SCHEDULED DELIVERY DATE.

PALLETIZATION IS REQUIRED FOR THESE SUPPLIES

Inspection and Acceptance are at ORIGIN

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 12 OF 111 PAGES

SPE1C1-21-R-0088

Form (CONTINUED)

FOB: Destination

Quality Systems Requirements: DPSCM 4155.3 Quality Systems Requirements document dated November 3, 1997, which is incorporated by reference into this solicitation, has been revised and replaced with DLA Troop Support Clothing and Textiles Additional Quality Assurance Requirements dated October 2018.

The revised document incorporates major changes to the previous revision. Please read it in its entirety.

Copies of this document can be found on the web at:

(1) http://www.dla.mil/TroopSupport/ClothingandTextiles/CTIndustry/ (Under C&T Additional Quality Assurance Requirements)

(2) http://www.dla.mil/Portals/104/Documents/TroopSupport/QA%20Req.pdf?ver=2018-11-16-132731-770

NOTICE TO DLA SUPPLIERS

This solicitation contains DFARS Clause 252.211-7006, Radio Frequency Identification (MAR 2018). This clause requires the successful awardee(s) to affix passive RFID tags, at the case and palletized unit load levels. The successful awardee(s) is also required to electronically submit advance shipment notices to DOD, to permit association of the passive RFID tag data with the corresponding shipment.

Procurement Technical Assistance Centers (PTACS) are available to deliver passive RFID assistance to DOD suppliers.

See http://www.dla.mil/db/procurem.htm to identify your local PTAC and obtain information on upcoming workshops and other training/outreach services.

OFFEROR REPRESENTATION AND CERTIFICATION

52.212-3 Offeror Representations and Certifications -- Commercial Items

As prescribed in 12.301(b)(2), insert the following provision:

Offeror Representations and Certifications -- Commercial Items (OCT 2018)

The offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site located at http://www.sam.gov/portal. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (u) of this provision.

After reviewing the System for Award Management (SAM) Web database information, the offeror verifies by submission of the offer that the representations and certifications currently posted electronically have been entered or updated within the last 12 months, are current, accurate, complete and applicable to this solicitation, unless otherwise noted in FAR 52.212-03

Please note that the Patient Protection and Affordable Health Care Act ("the Act"), 124 Stat. 119, imposes duties upon employers concerning the provision of health care to their employees. Health insurance costs, including any costs associated with compliance with changes in the applicable law, are the sole responsibility of the offeror. Offerors are advised that their proposals should include any costs associated with the implementation of the Act. Any changes in health coverage costs and/or costs associated with compliance, occurring after award of a contract pursuant to this solicitation will not form the basis for an equitable adjustment of the contract price.

Section C

NOTE: Specification Data will be an attachment to the solicitation.

See tech data below for Undershirt, White, Crew Neck, Each, PGC: 00312, http://farsite.hill.af.mil/reghtml/Regs/far2afmcfars/fardfars/Far/12.htm http://www.sam.gov/portal

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 13 OF 111 PAGES

SPE1C1-21-R-0088

2 Pack, PGC: 00036 and 3 Pack, PGC: 02768.

TECH DATA PGC00312 EACH 8/16/2021

NSN 8420005436643

TECH DATA PGC 02768 3 PACK

NSN 8420014951959

TECH DATA PGC 00036, 2 PACK

NSN 8420016690442

UNDERSHIRT, MAN'S, QUARTER SLEEVE, CREW NECK

TYPE I, WHITE

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE

WEB AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT

DATE CONTROLS.

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN.

ADDITIONAL INFORMATION FOR A-A-50013:

THE UNDERSHIRT SHALL BE IN ACCORDANCE WITH

A-A-50013G, DATED SEPTEMBER 15, 2009

TYPE I, CLASS 1, WHITE CREW NECK

INTERIM CHANGES TO A-A-50013G:

PAGE I, PARA. 2.2 CLASSES. ADD THE FOLLOWING NEW CLASS

UNDER CLASS 8: "CLASS 9 - TAN 499".

PAGE 2, PARA 3.1 DESCRIPTION. LINE 2, AFTER COLLARETTE, ADD "SEAMLESS SIDES,".

PAGE 2, TABLE I. MATERIAL REQUIREMENTS.

FABRIC WEIGHT LINE, UNDER "REQUIREMENT"

DELETE "4.5 (+/- 0.2)" AND SUBSTITE "4.0 (+/- 0.2)".

PARA. 3.2.1.2 LABILE SULFUR. DELETE "3.2.1.2 LABILE SULFUR"

AND SUBSTITUTE "3.2.2.2 LABILE SULFUR".

AQL'S FOR COMMERCIAL ITEM DESCRIPTIONS (CID'S)

END ITEM DIMENSIONAL 4.0

VISUAL 2.5

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 14 OF 111 PAGES

SPE1C1-21-R-0088

Form (CONTINUED)

ACCEPTABILITY OF LOTS WILL BE DETERMINED BY THE

USE OF "SAMPLING PROCEDURES AND TABLES FOR

INSPECTION BY ATTRIBUTES", ANSI/ASQC Z1.4

GENERAL INSPECTION LEVEL 2.

ADDITIONAL INFORMATION FOR PPP-B-636:

FEDERAL SPECIFICATION PPP-B-636 DATED JULY 12, 1981, INCLUDING INTERIM FEDERAL SPECIFICATION PPP-B-636L DATED JANUARY 1, 1991, IS HEREBY CANCELLED, AND REPLACED WITH ASTM-D-5118, STANDARD PRACTICE FOR FABRICATION OF FIBERBOARD SHIPPING BOXES, AND ASTM-D-1974, STANDARD PRACTICE FOR METHOD OF CLOSING, SEALING AND REINFORCING FIBERBOARD SHIPPING CONTAINERS.

ADDITIONAL INFORMATION FOR FED-STD-191:

FED-STD-191A NOTICE 7, DATED AUGUST 9, 2000 IS HEREBY INACTIVE FOR NEW DESIGN. WHEN NOT USING FED-

STD-191, SEE INTERIM CHANGES TO END ITEM SPECIFICATION FOR REPLACEMENT ASTM.

INTERIM CHANGES TO FED-STD-191A:

TEST METHOD 5202, PARA. 5.3, DELETE FIRST SENTENCE AND SUBSTITUTE: "THE SPECIMEN SHALL BE CLAMPED FIRMLY, WITH ONE END FLUSH WITH THE OUTER EDGE OF THE VISE, SUCH THAT ONE INCH OF SPECIMEN LIES WITHIN THE CLAMP AND ONE INCH OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION (FACE OF THE VISE), AND WITH

THE LONG EDGE PARALLEL TO THE FACE OF THE DIAL PLATE".

TEST METHOD 5309.1 ABRASION RESISTANT OF TEXTILE WEBBING. PAGE 1, PARA 4.1.2,LINE 4: DELETE "B-97" AND

SUBSTITUTE "B-91".

THE FOLLOWING METHODS ARE IDENTIFIED AS SPECIFYING OZONE DEPLETING SUBSTANCES: 1100, 1200, 1240, 1400, 1410, 1500, 1510,1520,1530, 1540, AND 1550. PARA 5.1 OF THESE TEST METHODS REQUIRE THE USE OF 1,1,1- TRICHLOROETHANE, ALCOHOL OR ETHER. 1,1,1-TRICHLORETHANE IS AN OZONE DEPLETING SUBSTANCE (METHYL CHLOROFORM) AND IS THEREFORE PROHIBITED. THE USE OF EITHER ALCOHOL OR ETHER IS REQUIRED WHEN THESE

METHODS ARE IN BASIC OR ANY REFERENCED DOCUMENT.

METHOD 5202, STIFFNESS OF CLOTH, DIRECTIONAL; CANTILEVER BENDING METHOD. PAGE 2, PARA. 5.3 DELETE FIRST SENTENCE AND SUBSTITUTE WITH THE FOLLOWING: "THE SPECIMEN SHALL BE CLAMPED FIRMLY, WITH 1 END FLUSH WITH THE OUTER EDGE OF THE VISE, SUCH THAT 1" OF THE SPECIMEN LIES WITHIN THE CLAMP AND 1" OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION (INNER FACE OF THE VISE) AND WITH THE LONG EDGE PARALLEL TO THE

FACE OF THE DIAL PLATE."

METHOD 5556.1, MOBILE LAUNDRY EVALUATION FOR TEXTILE MATERIALS, PAGE 5, PARA. 5.2.2, LINE 8: DELETE SENTENCE BEGINNING WITH "THE SPECIMENS AND BALLAST" IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING:

"THE SPECIMENS AND BALLAST SHALL BE SEPARATED, OPENED TO FULL WIDTH AND PLACED IN A PRE-HEATED DRYER HAVING A STACK TEMPERATURE OF 140-180 DEG. F. THIS TEMPERATURE RANGE CORRESPONDS TO A SETTING OF "HIGH" ON THE TEMPERATURE INDICATOR ON THE DRYER. DRYING SHALL CONTINUE FOR 45-60 MINUTES OR UNTILSAMPLES ARE

DRY IN A ROTATING TUMBLE DRYER."

PAGE 5, PARA. 5.2.3, LINE 8: DELETE SENTENCE BEGINNING WITH "THE SPECIMENS AND BALLAST" IN ITS ENTIRETY AND SUBSTITUTE WITH THEFOLLOWING: "THE SPECIMENS AND BALLAST SHALL BE SEPARATED, OPENED TO FULL WIDTH AND PLACED IN A PRE-HEATED DRYER HAVING A STACKTEMPERATURE OF 140-180 DEG. F. THIS TEMPERATURE RANGE CORRESPONDS TO A SETTING OF "HIGH" ON THE TEMPERATURE INDICATOR ON THE DRYER. DRYING SHALL CONTINUE FOR

35-40 MINUTES OR UNTIL SAMPLES ARE DRY."

METHOD 5931, ELECTROSTATIC DECAY OF FABRICS; DETERMINATION OF PAGE 1, PARA. 3: AFTER NUMBER OF DETERMINATIONS ADD "PER SAMPLE UNIT". PAGE 1, PARA. 4: DELETE "APPARTUS" AND SUBSTITUTE "APPARATUS".

PAGE 1, PARA. 5.1, LINE 3: AFTER "AT" DELETE"APPROXIMATELY".

PAGE 2, PARA. 5.2, LINES 2, AND 5: AFTER "OF" ADD "+-". LINE 6: AFTER "TO" ADD "+-".

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 15 OF 111 PAGES

SPE1C1-21-R-0088

Form (CONTINUED)

PAGE 2, PARA. 5.3: DELETE IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING:"5.3 MOUNT A SPECIMEN TIGHTLY ACROSS THE ELECTRODES, CENTERING IT OVER THE SENSOR OPENING. THE SURFACE OF THE TEST SPECIMEN (BACK OR FRONT) SHALL FACE THE SENSOR. RECORD (OPTIONAL) THE RESIDUAL CHARGE LEVEL ON THE SAMPLE AS SEEN BY THE

SENSOR, INCLUDING POLARITY.

NOTE THAT TEST SAMPLES WITH THE RESIDUAL CHARGE LEVELS OF LESS +500 VOLTS YIELD THE BEST RESULTS. APPLY +5000 VOLTS TO THEELECTRODES FOR A PERIOD OF 20 SECS. AT THE END OF THE 20 SECOND PERIOD, THE HIGH VOLTAGE (5000 VOLTS) SHALL BE TURNED OFF ANDTHE SPECIMENS IMMEDIATELY GROUNDED. THE VOLTAGE BEHAVIOR OF THE SPECIMEN WITH RESPECT TO TIME SHALL BE PLOTTED ON THE RECORDER. NOTE: IN SOME CASES, THE TEST EQUIPMENT WILL DISPLAY VOLTAGE AND DECAY TIME INFORMATION AND A CHART RECORDER IS NOT NECESSARY."

PAGE 2, PARA. 5.4, LINE 3: DELETE SENTENCE BEGINNING WITH "IF THE SPECIMEN DID" IN ITS ENTIRETY.

PAGE 2, PARA. 5.5: DELETE PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: "RECORD THE MAXIMUM VOLTAGE LEVEL(INCLUDING POLARITY) AND DECAY TIME TO 10% OF THE MAXIMUM VOLTAGE LEVEL ACHIEVED."

PAGE 2, PARA. 5.6, LINE 1: ADD THE FOLLOWING PRIOR TO 1ST SENTENCE: "REVERSE VOLTAGE POLARITY REPEAT

MEASUREMENT, ANDRECORD RESULTS."

PAGE 3, PARA. 6.6: DELETE PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: "THE AVERAGE TIME TO DECAY TO 10%OF THE MAX VOLTAGE SHALL BE INCLUDED FOR EACH OF THE WARP & FILLING DIRECTIONS, AS WELL AS THE OVERALL AVERAGE, FOR EACHFABRIC TESTED. THESE WILL BE OBTAINED BY AVERAGING THE TEST RESULTS (ABSOLUTE VALUE OF) TOGETHER FOR BOTH VOLTAGEPOLARITIES. UNLESS OTHERWISE STATED IN THE REQUIREMENTS DOCUMENT, THE FABRIC SHALL BE CONSIDERED ACCEPTABLE IF THEAVERAGE MAXIMUM VOLTAGE IN BOTH THE WARP AND FILLING DIRECTIONS IS LESS THAN 4000 VOLTS, AND THE AVERAGE DECAY TIME (TO 10% MAXVOLTAGE) IS GREATER THAN 0.5 SECONDS IN BOTH THE WARP AND FILLING DIRECTIONS. IT SHALL BE INDICATED WHETHER THE FABRIC

ISACCEPTABLE OR NON-ACCEPTABLE."

PAGE 3, PARA. 7.1, SECOND COLUMN, LINE 2: DELETE 406C AND SUBSTITUTE WITH "406D".

AFTER PARA. 7.1, ADD THE FOLLOWING: "7.2 NOTE: IF THE MODEL 406D STATIC DECAY METER, OR EQUIVALENT, IS

USED, A CHART RECORDER ISNOT MANDATORY FOR THE TEST."

(Ref. T0215)

INSPECTION OF SUPPLIES SHALL BE IN ACCORDANCE WITH FAR PART 52.246-2 STANDARD INSPECTION.

ADDITIONAL INFORMATION FOR MIL-STD-105E:

MIL-STD-105E, dated 10 May 1989, is hereby canceled.

Future acquisitions may refer to: MIL-STD-1916, "DoD Preferred Methods for Acceptance of Product," or

ANSI/ASQ Z1.4,

"Sampling Procedures and Tables for Inspection by Attributes."

Users are cautioned to evaluate these documents for their particular application before citing it as a replacement document.

(Copies of MIL-STD-1916 are available online at http://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

(Copies of ANSI/ASQ Z1.4 are available online at www.asq.org or ASQ Distribution Center, 5131 S. Third Street, Milwaukee, Wisconsin 53207-6028.)

MIL-STD-147E

w/CHANGE 1 23 December 2013

SUPERSEDING

MIL-STD-147E

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 16 OF 111 PAGES

SPE1C1-21-R-0088

Form (CONTINUED)

16 May 2008

DEPARTMENT OF DEFENSE

STANDARD PRACTICE

PALLETIZED UNIT LOADS

MIL-STD-129R W/CHANGE - DEPARTMENT OF DEFENSE STANDARD PRACTICE

MILITARY MARKING FOR SHIPMENT AND STORAGE

DATED 24 MAY 2018

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS

IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C&T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DLA TROOP SUPPORT C&T ITEMS, REGARDLESS OF MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST CONTAINER TO BE LOADED FOR EACH SHIPMENT. THE WORDS "PACKING LIST HERE" SHALL BE STENCILED, NOT HAND LETTERED, ON

THE CONTAINER.

ADDITIONAL INFORMATION FOR MIL-STD-2073-1:

NO ADDITIONAL INFORMATION FOLLOWS

(Ref. T0898)

DELETE CURRENT "BARCODE LABEL/TAG" REQUIREMENTS AND SUBSTITUTE THE FOLLOWING:

LABEL TAG: EACH ITEM SHALL BE INDIVIDUALLY BAR-CODED WITH A PAPER TAG FOR PERSONAL CLOTHING ITEMS. THE PAPER USED FOR THE TAGS SHALL BE STANDARD BLEACHED SULFATE HAVING A BASIS WEIGHT OF 100 POUNDS WITH A SMOOTH FINISH TO ACCEPT THERMAL TRANSFER AND DIRECT PRINTING. THE TAGS SHALL HAVE A HOLE AND SHALL BE ATTACHED TO EACH ITEM BY A FASTENER, CLEARLY LEGIBLE AND READABLE BY SCANNER. THE BAR CODING ELEMENT

SHALL BE A 13 DIGIT

NATIONAL STOCK NUMBER (NSN). THERE SHALL BE A 12 DIGIT UNIVERSAL PRODUCT CODE (UPC) ASSIGNED FOR ALL NSNS BY THE GOVERNMENT. THE INITIAL "UPC" MUST APPEAR BENEATH THE CODE. THE BAR CODES FOR NSN AND UPC SHALL BE A MEDIUM TO HIGH DENSITY AND SHALL BE LOCATED SO THAT THEY ARE COMPLETELY VISIBLE ON THE ITEM WHEN IT IS FOLDED AND PACKAGED AS SPECIFIED. THE LABEL'S LOCATION SHALL CAUSE NO DAMAGE TO THE ITEM.

NOTE: UNIVERSAL PRODUCT CODE INFORMATION THE GOVERMENT ASSIGNED UNIVERSAL PRODUCT CODE (UPC) MUST BE

PLACED ON ALL SHIPPING CARTONS ON WHICH THE NSN APPEARS.

THE FOLLOWING DEFECTS APPLY FOR BARCODE LABELS/TAGS:

BAR CODE OMITTED OR NOT READABLE BY SCANNER

HUMAN-READABLE INTERPRETATION (HRI) OMITTED OR ILLEGIBLE

NOT VISIBLE ON FOLDED, PACKAGED ITEM CAUSES DAMAGE TO THE ITEM

NOTE: IF THE END ITEM IS PLACED IN A PLASTIC BAG - USE TYPE VII (PRESSURE SENSTIVE LABEL) OF MIL-

DTL-32075.

IF THE END ITEM IS TIED IN A BUNDLE OR LEFT AS AN INDIVIDUAL ITEM, USE TYPE VIII (TAG, PAPER) OF MIL-

DTL-32075.

THE GOVERNMENT ASSIGNED UNIVERSAL PRODUCT

CODE (UPC) MUST BE PLACED ON ALL SHIPPING

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 17 OF 111 PAGES

SPE1C1-21-R-0088

Form (CONTINUED)

PACKAGING INFORMATION

PGC 00312, PGC 02768

SHIPPING CONTAINER = ONE HUNDRED AND TWENTY (40 PACKAGES)

PRES/PACK LEVELS SHALL BE IN

ACCORDANCE WITH A-A-50013.

PALLETIZATION SHALL BE IN ACCORDANCE

WITH MIL-STD-147.

PACKING. ONE HUNDRED AND TWENTY (40 PACKAGES)

OF UNDERSHIRTS OF ONE SIZE IN A SHIPPING CARTON

THE SHIPPING CONTAINER SHALL BE A FIBERBOARD BOX

CONFORMING TO STYLE RSC-L, TYPE CF (VARIETY SW)

OR SF, CLASS DOMESTIC , GRADE 275 OF ASTM-D1974.

THE INSIDE OF EACH BOX SHALL BE FITTED WITH A

BOX LINER CONFORMING TO TYPE CF, CLASS DOMESTIC,

VARIETY DW, GRADE 275 OF ASTM-D1974. INSIDE

DIMENSIONS OF THE BOX SHALL; BE APPROXIMATELY

23-1/2 INCHES IN LENGTH, 15 INCHED IN WIDTH AND

15 INCHED IN DEPTH. EACH BOX SHALL BE CLOSED IN

ACCORDANCE WITH METHOD II AS SPECIFIED IN

ASTM-D1974. ALL SHIPPING CARTONS SHALL HAVE A

NSN AND UPC BAR CODE LABEL. MARKING OF CARTONS

AND SHIPPING LABELS SHALL BE IN ACCORDANCE WITH

MIL-STD-129. PALLETIZATION SHALL BE IN

ACCORDANCE WITH MIL-STD-147.

PGC 00036

SHIPPING CONTAINER = ONE HUNDRED AND TWENTY (60 PACKAGES)

PRES/PACK LEVELS SHALL BE IN

ACCORDANCE WITH A-A-50013.

PALLETIZATION SHALL BE IN ACCORDANCE

WITH MIL-STD-147.

PACKING. ONE HUNDRED AND TWENTY (60 PACKAGES)

OF UNDERSHIRTS OF ONE SIZE IN A SHIPPING CARTON

THE SHIPPING CONTAINER SHALL BE A FIBERBOARD BOX

CONFORMING TO STYLE RSC-L, TYPE CF (VARIETY SW)

OR SF, CLASS DOMESTIC , GRADE 275 OF ASTM-D1974.

THE INSIDE OF EACH BOX SHALL BE FITTED WITH A

BOX LINER CONFORMING TO TYPE CF, CLASS DOMESTIC,

VARIETY DW, GRADE 275 OF ASTM-D1974. INSIDE

DIMENSIONS OF THE BOX SHALL; BE APPROXIMATELY

23-1/2 INCHES IN LENGTH, 15 INCHED IN WIDTH AND

15 INCHED IN DEPTH. EACH BOX SHALL BE CLOSED IN

ACCORDANCE WITH METHOD II AS SPECIFIED IN

ASTM-D1974. ALL SHIPPING CARTONS SHALL HAVE A

NSN AND UPC BAR CODE LABEL. MARKING OF CARTONS

AND SHIPPING LABELS SHALL BE IN ACCORDANCE WITH

MIL-STD-129. PALLETIZATION SHALL BE IN

ACCORDANCE WITH MIL-STD-147.

252.211-7006 - RADIO FREQUENCY IDENTIFICATION (RFID) Required (ref. T8379; Nov. 08, 2006)

Packaging examination. The fully packaged end item shall be examined for the defects listed below. The

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 18 OF 111 PAGES

SPE1C1-21-R-0088

Form (CONTINUED) lot size shall be expressed in units of shipping containers. The sample unit shall be one shipping container fully packaged. The Inspection level shall be S-2 and the AQL, expressed in terms of defects per hundred units, shall be 2.5.

Examine Defect

Marking Omitted; incorrect; illegible, of (exterior) improper size, location, sequence & Unit Pack, or method of application.

Materials Any component missing, damaged or not as specified.

Workmanship Inadequate application of components, such as: incomplete closure of container flaps, loose strapping, improper taping, or inadequate stapling. Bulged or distorted container.

Contents Number of intermediate containers per shipping container is more or less than required.

Number of items per container is more or less than required.

Palletization examination. The fully packaged and palletized end items shall be examined for the defects listed below. The lot size shall be expressed in units of palletized unit loads. The sample unit shall be one palletized unit load, fully packaged.

The Inspection level shall be S-1 and the AQL, expressed in terms of defects per hundred units, shall be 6.5.

Examine Defect

Finished Length, width or height exceeds Dimensions specified maximum requirement.

Palleti- Pallet pattern not as specified.

zation Interlocking of loads not as specified. Load not bonded with required straps as specified.

Weight Exceeds maximum load limits.

Marking Omitted; incorrect; illegible;

of improper size, location, sequence or method of appli-cation.

RFID HANGTAG:

An RFID inlay shall be added to the barcode paper hang tag attached to each item. Where the use of self-adhesive bar-code labels are authorized, the RFID inlay may be added to the self-adhesive label in lieu of a paper hang tag. All other contract barcode and hang tag requirements still apply.

The RFID inlay should be passive Gen2 with a frequency range between 860 and 960 MHz. The RFID antenna should be Avery/Dennis AD222 or comparable with ISO/IEC 18000-C EPCglobal C1G2 Protocol and an EPC memory allocation containing a 96 bit EPC Number. The data linking the EPC number to the NSN and quantity unit

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 19 OF 111 PAGES

SPE1C1-21-R-0088

Form (CONTINUED) pack must be exportable to VIM/ASAP. The bar code of the EPC Number must be printed at the bottom of the tag along with the human readable version below the bar code.

In addition to defects applicable to the paper tag and barcoding element, the RFID tag shall be examined for the defects listed below:

RFID Inlay omitted RFID Inlay not secure RFID Inlay not laying flat when packaged RFID Inlay not readable with RFID scanner RFID Inlay or configuration not as specified

The manual "Item-Level Passive RFID Technology Manufacturer's Information Guide" provides guidance on RFID implementation and is available from the contracting officer.

SIGNIFICANT NOTE - "PALLETIZATION IS REQUIRED FOR THESE SUPPLIES".

NOTE: THE FOLLOWING APPLIES TO ALL NON-MANUFACTURED WOOD PACKAGING MATERIALS:

"All Wood Packaging Material (WPM) acquired by DOD must meet requirements of International Standards for Phytosanitary Measures (ISPM) 15, "Guidelines for Regulating Wood Packaging Materials in International Trade." DOD shipments inside and outside of the United States must meet ISPM 15 whenever WPM is used to ship DOD cargo, or when wood is being acquired by DLA for future use as packaging material. WPM is defined as wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frame and cleats. Packaging materials exempt from the requirements are materials that have undergone a manufacturing process, such as corrugated fiberboard, plywood, particleboard, veneer, and oriented strand board (OSD). All WPM shall comply with one of the following official quality control programs:

Heat Treatment (HT) or Kiln Dried Heat Treatment (KD HT) in accordance with American Lumber Standard Committee, Incorporated (ALSC) Wood Packaging Material Program and WPM Enforcement Regulations (see http://www.alsc.org/; or

All WPM shall include certification/quality markings in accordance with the ALSC or NWPCA standards, as applicable. Markings shall be placed in an unobstructed area that will be readily visible to inspectors.

Pallet markings shall be applied to the stringer or block on diagonally opposite sides of the pallet and be contrasting and clearly visible.

All containers shall be marked on a side other than the top or…