Series_73U.pdf
PDF 101 KB Posted
- Attached to
- Exterior Stripping/Coating of Water Storage Tank
- Solicitation number
- PSUT-25-05
- Issued by
- Broward County, Florida
About this file
This is a Safety Data Sheet (SDS) for Series 73U (ENDURA-SHIELD FISCHER 13SF UV PACK), an industrial paint product manufactured by Tnemec Company, Inc., issued on May 3, 2024. The product is classified as a flammable liquid (Category 2) and hazardous substance under OSHA regulations, with serious health hazards including eye irritation, potential carcinogenicity (Category 1A), respiratory irritation, and organ damage from prolonged or repeated exposure. The paint contains 10% crystalline silica (quartz) by weight, which poses a cancer risk and can cause silicosis. The product is intended solely for professional industrial use and is not approved for residential or consumer applications. Safe handling requires personal protective equipment, well-ventilated or outdoor application only, prevention of static discharge, use of non-sparking tools, and storage in locked, cool locations away from heat and open flames. In case of exposure, immediate medical attention is recommended for eye contact or inhalation, with specific rinse procedures outlined for eye exposure. The SDS is relevant to the City of Pembroke Pines' water storage tank coating project (IFB # PSUT-25-05), where Tnemec's Series 156 Envirocrete is specified as an approved coating option, indicating that bidding contractors must be prepared to handle and apply hazardous industrial coatings in compliance with all safety, environmental, and regulatory requirements outlined in this documentation.
View the file
Other files
Show all 11
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Safety Data Sheet
Issue Date 03-May-2024 Revision Date 03-May-2024 Revision Number 1
1. IDENTIFICATION
Product identifier Product Code F073U1327A Product Name ENDURA-SHIELD FISCHER 13SF UV PACK
Other means of identification Common Name SERIES 73U, PART A UN/ID no. 1263 Synonyms None
Recommended use of the chemical and restrictions on use Recommended Use industrial paint.
Uses advised against Consumer use, For professional use only. Not for residential use.
Details of the supplier of the safety data sheet
Emergency telephone number Company Phone Number Tnemec Regulatory Dept: 816-474-3400 24 Hour Emergency Phone Number 800-535-5053 (Infotrac)
2. HAZARDS IDENTIFICATION
Classification
OSHA Regulatory Status This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200)
Serious eye damage/eye irritation Category 2 Carcinogenicity Category 1A Specific target organ toxicity (single exposure) Category 3 Specific target organ toxicity (repeated exposure) Category 1
Label elements
EMERGENCY OVERVIEW
Manufacturer Address Tnemec Company, Inc. 123 W. 23rd Avenue, North Kansas City, MO 64116-3094 (816) 474-3400 Distributor Tnemec Company, Inc. 86 Boul, des Entreprises, Ste. 203, Boisbriand, Quebec Canada J7G 2T3
Flammable Liquids Category 2
Danger
Hazard statements Causes serious eye irritation May cause cancer May cause respiratory irritation. May cause drowsiness or dizziness Causes damage to organs through prolonged or repeated exposure Highly flammable liquid and vapor
Page 1 / 11
F073U1327A ENDURA-SHIELD FISCHER 13SF UV
PACK
Revision Date 03-May-2024
Precautionary Statements Prevention Obtain special instructions before use Do not handle until all safety precautions have been read and understood Use personal protective equipment as required Wash face, hands and any exposed skin thoroughly after handling Use only outdoors or in a well-ventilated area Do not breathe dust/fume/gas/mist/vapors/spray Do not eat, drink or smoke when using this product Keep away from heat/sparks/open flames/hot surfaces. — No smoking Keep container tightly closed Ground/bond container and receiving equipment Use only non-sparking tools Take precautionary measures against static discharge Keep cool Use explosion-proof electrical, ventilating, lighting and all material-handling equipment.
Response IF exposed or concerned: Get medical advice/attention IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing If eye irritation persists: Get medical advice/attention IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing In case of fire: Use CO2, dry chemical, or foam for extinction
Storage Store locked up Store in a well-ventilated place. Keep container tightly closed Keep away from children
Disposal Dispose of contents/container to an approved waste disposal plant
Hazards not otherwise classified (HNOC) Other information Harmful to aquatic life with long lasting effects Cancer hazard. Contains crystalline silica which can cause cancer. (Risk of cancer depends on duration and level of exposure).
Respirable crystalline silica (quartz) can cause silicosis, a fibrosis (scarring) of the lungs
SEE SAFETY DATA SHEET
Acute Toxicity 41.85321 % of the mixture consists of ingredient(s) of unknown toxicity.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical name CAS No. Weight-%
CRYSTALLINE SILICA (QUARTZ) 14808-60-7 10 - <30%
PROPYLENE GLYCOL MONOMETHYL ETHER 108-65-6 10 - <30%
Appearance viscous liquid Physical state liquid Odor No information available
Page 2 / 11
Revision Date 03-May-2024
ACETATE
TITANIUM DIOXIDE (TOTAL DUST) 13463-67-7 1 - <10%
METHYL ETHYL KETONE 78-93-3 1 - <10%
tert-BUTYL ACETATE 540-88-5 1 - <10%
P-CHLOROBENZOTRIFLUORIDE 98-56-6 1 - <10%
METHYL N-AMYL KETONE 110-43-0 1 - <10%
COPPER COMPOUNDS 147-14-8 1 - <10%
BIS (PENTAMETHYLPIPERIDYL) SEBACATE 41556-26-7 0.1 - <1%
PROPRIETARY - 0.1 - <1%
DISPERSING AGENT 68647-95-0 0.1 - <1%
ETHYL BENZENE 100-41-4 0.1 - <1%
PETROLEUM SOLVENT (NAPTHA) 64742-95-6 0.1 - <1%
*The exact percentage (concentration) of composition has been withheld as a trade secret.
4. FIRST AID MEASURES
Description of first aid measures
General advice If symptoms persist, call a physician.
Eye contact Rinse thoroughly with plenty of water, also under the eyelids. If symptoms persist, call a physician.
Skin contact Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. If symptoms persist, call a physician.
Inhalation If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention immediately.
Ingestion If swallowed, do not induce vomiting. Get medical attention immediately.
Self-protection of the first aider Use personal protective equipment. Avoid contact with eyes, skin and clothing.
Most important symptoms and effects, both acute and delayed
Notes to physician Treat symptomatically.
5. FIRE-FIGHTING MEASURES
Suitable extinguishing media Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Unsuitable extinguishing media High volume water jet.
Specific hazards arising from the chemical Thermal decomposition can lead to release of irritating gases and vapours In the event of fire and/or explosion do not breathe fumes
Protective equipment and precautions for firefighters Use water spray to cool unopened containers. In the event of fire, wear self-contained breathing apparatus. Keep away from heat/sparks/open flames/hot surfaces. MAY CAUSE HEAT AND PRESSURE BUILD-UP IN CLOSED CONTAINERS. Solvent vapors are heavier than air and may spread along floors. Flash back possible over considerable distance.
6. ACCIDENTAL RELEASE MEASURES
Page 3 / 11
Revision Date 03-May-2024
Personal precautions, protective equipment and emergency procedures
Personal precautions Avoid contact with eyes, skin and clothing. Use personal protective equipment. Remove all sources of ignition.
Environmental Precautions
Environmental precautions Prevent further leakage or spillage if safe to do so. Do not flush into surface water or sanitary sewer system.
Methods and material for containment and cleaning up
Methods for containment Remove all sources of ignition. Spills may be collected with inert, absorbent material for proper disposal. Use non-sparking tools, protective gloves, goggles and clothing, adequate ventilation, avoid the breathing of vapors and use respiratory protective devices. Transfer absorbent material to suitable containers for proper disposal.
Methods for cleaning up If spilled, contain spilled material and remove with inert absorbent. Dispose of contaminated absorbent, container and unused contents in accordance with local, state and federal regulations.
7. HANDLING AND STORAGE
Precautions for safe handling
Handling Close container after each use. Avoid contact with eyes, skin and clothing. Do not eat, drink or smoke when using this product. If splashes are likely to occur, wear goggles. Wear protective gloves/clothing. Do not burn, or use a cutting torch on, the empty drum. When used in a mixture, read the labels and safety data sheets of all components. Wash thoroughly after handling.
Conditions for safe storage, including any incompatibilities
Storage Keep away from heat, sparks and flame. VAPORS MAY CAUSE FLASH FIRE. Use only in an area containing flame proof equipment. Extinguish all flames and pilot lights, and turn off stoves, heaters, electric motors and other sources of ignition during use and until all vapors are gone. Prevent build-up of vapors by opening all windows and doors to achieve cross ventilation.
Incompatible products No information available.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Exposure guidelines Chemical name ACGIH TLV OSHA PEL NIOSH IDLH
CRYSTALLINE SILICA (QUARTZ)
14808-60-7
TWA: 0.025 mg/m3 respirable particulate matter
TWA: 50 µg/m3 50 mg/m3 respirable dust
TITANIUM DIOXIDE (TOTAL DUST)
13463-67-7
TWA: 0.2 mg/m3 nanoscale respirable particulate matter
TWA: 2.5 mg/m3 finescale respirable particulate matter
TWA: 15 mg/m3 total dust 5000 mg/m3
METHYL ETHYL KETONE
78-93-3
TWA: 75 ppm Skin
STEL: 150 ppm
TWA: 200 ppm TWA: 590 mg/m3
3000 ppm tert-BUTYL ACETATE 540-88-5
TWA: 50 ppm STEL: 150 ppm
TWA: 200 ppm TWA: 950 mg/m3
1500 ppm
P-CHLOROBENZOTRIFLUORIDE
98-56-6
TWA: 2.5 mg/m3 -
Page 4 / 11
250 mg/m3
Revision Date 03-May-2024
METHYL N-AMYL KETONE
110-43-0
TWA: 50 ppm TWA: 100 ppm TWA: 465 mg/m3
800 ppm
COPPER COMPOUNDS
147-14-8
TWA: 1 mg/m3 dust and mist - 100 mg/m3 dust and mist
ETHYL BENZENE
100-41-4
TWA: 20 ppm TWA: 100 ppm TWA: 435 mg/m3
800 ppm
Appropriate engineering controls
Engineering measures Sufficient ventilation, in volume and pattern, should be provided through both local and general exhaust to keep the air contaminant concentration below current applicable OSHA Permissible Exposure Limits (PEL) and ACGIH''s Threshold Limit Values (TLV).
Appropriate ventilation should be employed to remove hazardous decomposition products formed during welding or flame cutting operations of surfaces coated with this product.
Individual protection measures, such as personal protective equipment
Eye/face protection If splashes are likely to occur, wear Goggles
Skin and body protection Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Respiratory protection Use only with adequate ventilation. Do not breathe vapors, spray mist, or dust. Ensure fresh air entry during application and drying. If you experience eye watering, headache or dizziness or if air monitoring demonstrates vapor/mist or dust levels are above applicable limits, wear an appropriate, properly fitted respirator (NIOSH/MSHA approved) during and after application. Follow respirator manufacturer's directions for respirator use.
General hygiene considerations Handle in accordance with good industrial hygiene and safety practice.
Avoid breathing dust created by cutting, sanding, or grinding.
9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
Physical state liquid Appearance viscous liquid Odor No information available Color No information available Odor threshold No information available
Property Values Remarks pH No data available Melting point / freezing point No data available Boiling point / boiling range No information available Flash point 27 °C / 80 °F Pensky Martens - Closed Cup Evaporation rate No data available Flammability (solid, gas) No data available Flammability Limit in Air No data available
Upper flammability limit No information available Lower flammability limit No information available
Vapor pressure No data available Vapor density No data available Specific gravity 1.37068 g/cm3 Water solubility Insoluble in cold water Solubility in other solvents No data available Partition coefficient: n-octanol/water No data available Autoignition temperature No data available Decomposition temperature No information available Kinematic viscosity No information available Dynamic viscosity
Page 5 / 11
No data available
Revision Date 03-May-2024
Other Information
Molecular weight No information available Density 11.43148 lbs/gal Volatile organic compounds (VOC) content
3.10046 lbs/gal
Total volatiles weight percent 27.1221 % Total volatiles volume percent 40.6955 % Bulk density No information available
10. STABILITY AND REACTIVITY
Reactivity
Chemical stability Stable under recommended storage conditions.
Possibility of hazardous reactions None under normal processing.
Conditions to avoid Heat, flames and sparks.
Incompatible materials No information available
Hazardous decomposition products Hazardous combustion products may include: A complex mixture of airborne solid and liquid particulates and gases (smoke).
Carbon monoxide. Unidentified organic and inorganic compounds. Carbon dioxide. Hydrocarbons.
11. TOXICOLOGICAL INFORMATION
Information on Likely Routes of Exposure
Inhalation May cause central nervous system depression with nausea, headache, dizziness, vomiting, and incoordination.
Eye contact Irritating to eyes.
Skin contact Irritating to skin.
Ingestion Harmful if swallowed.
Information on toxicological effects
Symptoms Symptoms of overexposure may be headache, dizziness, tiredness, nausea and vomiting.
Skin disorders.
Delayed and immediate effects as well as chronic effects from short and long-term exposure
Chronic Toxicity NOTICE: Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal. Cancer hazard.
Contains crystalline silica which can cause cancer. (Risk of cancer depends on duration and level of exposure).
Sensitization No information available.
No data available
Page 6 / 11
Revision Date 03-May-2024
Mutagenicity No information available.
Carcinogenicity The table below indicates whether each agency has listed any ingredient as a carcinogen.
Chemical name ACGIH IARC NTP OSHA
CRYSTALLINE SILICA
(QUARTZ)
14808-60-7
A2 Group 1 Known X
TITANIUM DIOXIDE (TOTAL
DUST)
13463-67-7
A3 Group 2B - X
P-CHLOROBENZOTRIFLU
ORIDE
98-56-6
Group 2B - X
ETHYL BENZENE
100-41-4
A3 Group 2B - X
Reproductive effects No information available.
STOT - single exposure No information available STOT - repeated exposure No information available
Target organ effects blood, Central nervous system, Gastrointestinal tract, Eyes, kidney, liver, Lungs, respiratory system, Skin.
Aspiration hazard Based on product level data, this product does not meet the requirement to be classified as an aspiration hazard. However, this product contains an ingredient that may cause aspiration if swallowed.
Acute Toxicity 41.85321 % of the mixture consists of ingredient(s) of unknown toxicity.
The following values are calculated based on chapter 3.1 of the GHS document
12. ECOLOGICAL INFORMATION
Ecotoxicity
47.5300138458 % of the mixture consists of components(s) of unknown hazards to the aquatic environment Chemical name Toxicity to algae Toxicity to fish Toxicity to daphnia
PROPYLENE GLYCOL
MONOMETHYL ETHER ACETATE
108-65-6
- LC50: 161 mg/L Pimephales promelas 96 h static
EC50: >500 mg/L Daphnia magna 48 h
METHYL ETHYL KETONE
78-93-3
- LC50: 3130 - 3320 mg/L Pimephales promelas 96 h flow-through
EC50: >520 mg/L Daphnia magna 48 h
EC50: 5091 mg/L Daphnia magna 48 h
EC50: 4025 - 6440 mg/L Daphnia magna 48 h Static tert-BUTYL ACETATE 540-88-5
- LC50: 296 - 362 mg/L Pimephales promelas 96 h flow-through
P-CHLOROBENZOTRIFLUORIDE
98-56-6
- LC50: 3 mg/L Danio rerio 96 h semi-static
EC50: 3.68 mg/L Daphnia magna 48 h
METHYL N-AMYL KETONE
110-43-0
- LC50: 126 - 137 mg/L Pimephales promelas 96 h flow-through
BIS (PENTAMETHYLPIPERIDYL)
SEBACATE
41556-26-7
- LC50: 0.97 mg/L Lepomis macrochirus 96 h static
ETHYL BENZENE
100-41-4
EC50: 4.6 mg/L Pseudokirchneriella subcapitata 72 h EC50: >438 mg/L
Pseudokirchneriella subcapitata 96 h EC50: 2.6 - 11.3 mg/L
Pseudokirchneriella subcapitata 72 h static
EC50: 1.7 - 7.6 mg/L Pseudokirchneriella subcapitata 96 h static
LC50: 11.0 - 18.0 mg/L Oncorhynchus mykiss 96 h static LC50: 4.2 mg/L Oncorhynchus mykiss 96 h semi-static LC50: 7.55 - 11 mg/L Pimephales promelas 96 h flow-through LC50: 32 mg/L Lepomis macrochirus
96 h static LC50: 9.1 - 15.6 mg/L Pimephales promelas 96 h static LC50: 9.6 mg/L Poecilia reticulata 96 h static
EC50: 1.8 - 2.4 mg/L Daphnia magna 48 h
PETROLEUM SOLVENT (NAPTHA) - LC50: 9.22 mg/L Oncorhynchus
Page 7 / 11
EC50: 6.14 mg/L Daphnia magna 48
Revision Date 03-May-2024
64742-95-6 mykiss 96 h h
Persistence and degradability No information available.
Bioaccumulation No information available.
Mobility in Environmental Media Chemical name log Pow
PROPYLENE GLYCOL MONOMETHYL ETHER ACETATE
108-65-6
0.43
METHYL ETHYL KETONE
78-93-3
0.29 tert-BUTYL ACETATE 540-88-5
1.64
P-CHLOROBENZOTRIFLUORIDE
98-56-6
3.7
METHYL N-AMYL KETONE
110-43-0
1.98
COPPER COMPOUNDS
147-14-8
6.6
BIS (PENTAMETHYLPIPERIDYL) SEBACATE
41556-26-7
0.37
DISPERSING AGENT
68647-95-0
>5
ETHYL BENZENE
100-41-4
3.118
Other Adverse Effects No information available
13. DISPOSAL CONSIDERATIONS
Waste treatment methods
Disposal Methods Keep container tightly closed. If spilled, contain spilled material and remove with inert absorbent. Dispose of contaminated absorbent, container and unused contents in accordance with local, state and federal regulations.
Contaminated packaging Empty containers should be taken to an approved waste handling site for recycling or disposal.
Chemical name RCRA RCRA - Basis for Listing RCRA - D Series Wastes RCRA - U Series Wastes
METHYL ETHYL KETONE
78-93-3 U159 Included in waste streams:
F005, F039
200.0 mg/L regulatory level U159
XYLENE
1330-20-7
Included in waste stream:
F039
U239
ETHYL BENZENE
100-41-4
Included in waste stream:
F039
TOLUENE
108-88-3
U220 Included in waste streams:
F005, F024, F025, F039, K015, K036, K037, K149, K151
U220
Chemical name CAWAST
METHYL ETHYL KETONE
78-93-3 Toxic
Ignitable
COPPER COMPOUNDS
147-14-8 Toxic
ETHYL BENZENE
Page 8 / 11
Toxic
Revision Date 03-May-2024
100-41-4 Ignitable
14. TRANSPORT INFORMATION
DOT
UN/ID no. 1263 Proper Shipping Name PAINT Hazard Class 3 Packing Group II Emergency Response Guide Number
Additional Information Call TNEMEC Traffic Department - 816-474-3400 for additional information or other modes of Transportation.
15. REGULATORY INFORMATION
International Inventories TSCA Complies DSL/NDSL Complies EINECS/ELINCS Does Not Comply ENCS Does Not Comply IECSC Does Not Comply KECL Does Not Comply PICCS Does Not Comply AICS Does Not Comply
TSCA - United States Toxic Substances Control Act Section 8(b) Inventory DSL/NDSL - Canadian Domestic Substances List/Non-Domestic Substances List EINECS/ELINCS - European Inventory of Existing Commercial Chemical Substances/EU List of Notified Chemical Substances ENCS - Japan Existing and New Chemical Substances IECSC - China Inventory of Existing Chemical Substances KECL - Korean Existing and Evaluated Chemical Substances PICCS - Philippines Inventory of Chemicals and Chemical Substances AICS - Australian Inventory of Chemical Substances
Clean Air Act, Section 112 Hazardous Air Pollutants (HAPs) (see 40 CFR 61) The following chemical(s) are listed as HAP under the U.S. Clean Air Act, Section 12 (40 CFR 61):
Chemical name HAPS Data
ETHYL BENZENE
SARA 313
Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA). This product contains a chemical or chemicals which are subject to the reporting requirements of the Act and and Title 40n of the Code of Federal Regulations, Part 372:
Chemical name SARA 313 - Threshold Values
METHYL ETHYL KETONE - 78-93-3 1.0
COPPER COMPOUNDS - 147-14-8 1.0
ETHYL BENZENE - 100-41-4 0.1
SARA 311/312 Hazardous Categorization
Acute Health Hazard Yes Chronic Health Hazard Yes Fire Hazard Yes Sudden Release of Pressure Hazard
Page 9 / 11
No
Revision Date 03-May-2024
Reactive Hazard No
Chemical name CWA - Reportable Quantities
CWA - Toxic Pollutants CWA - Priority Pollutants CWA - Hazardous Substances tert-BUTYL ACETATE 540-88-5
X
COPPER COMPOUNDS
147-14-8
X
ETHYL BENZENE
100-41-4
1000 lb X X X
Chemical name Hazardous Substances RQs CERCLA EHS RQs RQ
METHYL ETHYL KETONE
78-93-3 5000 lb RQ 5000 lb final RQ
RQ 2270 kg final RQ tert-BUTYL ACETATE
540-88-5 5000 lb RQ 5000 lb final RQ
RQ 2270 kg final RQ
ETHYL BENZENE
100-41-4 1000 lb RQ 1000 lb final RQ
RQ 454 kg final RQ
Chemical name TSCA 5(a)2 2,4-PENTANEDIONE 54 FR 39548, Sep 27, 1989 proposed rule
California Prop. 65
WARNING: This product can expose you to the following chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Chemical name California Prop. 65 CRYSTALLINE SILICA (QUARTZ) - 14808-60-7 Carcinogen
TITANIUM DIOXIDE (TOTAL DUST) - 13463-67-7 Carcinogen P-CHLOROBENZOTRIFLUORIDE - 98-56-6 Carcinogen
ETHYL BENZENE - 100-41-4 Carcinogen STYRENE - 100-42-5 Carcinogen
CRYSTALLINE SILICA (QUARTZ) - 14808-60-7 Carcinogen TOLUENE - 108-88-3 Developmental ETHANOL - 64-17-5 Carcinogen
Developmental CARBON BLACK DUST & FUME - 1333-86-4 Carcinogen
California SCAQMD Rule 443 Contains Photochemically Reactive Solvent
State Right-to-Know
Chemical name New Jersey Massachusetts Pennsylvania
CRYSTALLINE SILICA (QUARTZ)
14808-60-7 X X X
TITANIUM DIOXIDE (TOTAL DUST)
13463-67-7
X X X
METHYL ETHYL KETONE
78-93-3
X X X tert-BUTYL ACETATE 540-88-5
X X X
P-CHLOROBENZOTRIFLUORIDE
98-56-6
X
METHYL N-AMYL KETONE
110-43-0
X X X
COPPER COMPOUNDS
147-14-8
X X
ETHYL BENZENE
100-41-4
X X
Page 10 / 11
X
Revision Date 03-May-2024
16. OTHER INFORMATION
Prepared By Tnemec Regulatory Dept: 816-474-3400 Revision Date 03-May-2024 Revision Summary 14 1 4 5 Disclaimer For specific information regarding occupational safety and health standards, please refer to the Code of Federal Regulations, Title 29, Part 1910.
To the best of our knowledge, the information contained herein is accurate. However, neither the Tnemec Company or any of its subsidiaries assume any liability whatsoever for the accuracy of completeness of the information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown health hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards which exist.
End of SDS
NFPA Health 2 Flammability 3 Instability 1 Physical hazard -
HMIS (Hazardous Material Information System)
Health 2* Flammability 3 Reactivity 1
Page 11 / 11
File details come from the government source that posted it. Updated .