Sector NOLA Roof Repair SOW.pdf
PDF 360 KB Posted
- Attached to
- Repair Roof at USCG Sector New Orleans
- Solicitation number
- 70Z02925QNEWO24632
About this file
This is a Project Specification document from the Department of Homeland Security, United States Coast Guard for a roof repair project at Sector New Orleans. The project involves repairing the 4th Deck Roof, with specific scope of work including removing and replacing sealants at EIFS coping joints and metal flashing, installing new backer rods, applying polyurethane sealant according to manufacturer instructions, and applying a new base coat and top colored coat to the entire EIFS coping. The project site is located at 200 Hendee St, New Orleans, LA 70114. Contractors are required to follow OSHA Safety and Health Standards and will be responsible for disposing of old materials. Site visit contacts are CWO James Potts and DC1 Jacob Burns, with their respective contact information provided.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Photos - NOLA Roof Repair.docx | DOCX document | |
| SF 1442 - Repair Roof for Sector New Orleans.pdf | ||
| Construction Terms and Conditions.pdf | ||
| Construction Wage Rates for Orleans Parish.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF HOMELAND SECURITY
UNITED STATES COAST GUARD
Sector New Orleans, LA
Project Specification
For
Sector New Orleans Roof Repair
Table of Contents
DIVISION 01 – GENERAL REQUIREMENTS 3
SECTION 01 11 00 - GENERAL PARAGRAPHS
PART 1 GENERAL
DIVISION 01 – GENERAL REQUIREMENTS
SECTION 01 11 00 - GENERAL PARAGRAPHS
1.1 PROJECT BRIEF: Overall deterioration of EIFS including sealant, roof of 4th Deck.
1.2 SCOPE OF WORK: This work will take place on the 4th Deck Roof at Sector Nola.
1. Remove existing sealants at all EIFS coping joints.
2. Clean and prepare all surfaces at all joints for application of new polyurethane sealant.
3. Supply and install new backer rods to all joints.
4. Apply new polyurethane sealant to all joints IAW manufactures instructions.
5. Remove existing sealant at metal flashing and EIFS transition.
6. Clean and prepare all surfaces at metal flashing and EIFS transition.
7. Apply new polyurethane sealant to all joints IAW manufactures instructions.
8. Apply mesh, base coat and top colored coat to entire EIFS coping.
9. Remove and discard all debris and materials from the site upon completion.
1.3 LOCATION: Project site is located at 200 Hendee St, New Orleans, LA 70114.
1.4 POST AWARD: N/A
1.5 CONTINUITY OF FACILITIES OPERATION: N/A
1.6 NOTICE TO PROCEED (NTP) Notice to Proceed (NTP) begins the Project Award. N/A
1.7 NOTIFICATION OF START AND COMPLETION OF WORK: N/A
1.8 RECYCLING AND DISPOSAL OF REFUSE: Disposal of the old Polyurethane Sealant and Backer Rods will be the responsibility of the contractor.
1.9 SAFETY: During the execution of this contract, the Contractor shall conform to the rules and regulations as set forth by OSHA Safety and Health Standards, 29 CFR Part 1926 - Safety and Health Regulations for Construction. The contractor shall provide barriers, temporary fencing, trench covers, fall protection, etc. wherever work could cause injury to workers, visitors, Coast Guard personnel, or dependents.
1.10 TEMPORARY FACILITIES:
A. N/A
1.11 PROJECT SCHEDULE: N/A
1.12 DRAWINGS: N/A
PART 2 PRODUCTS – IAW EIF Manufacturer’s Instructions.
PART 3 CONTACTS FOR SITE VISITS:
Name: CWO James Potts
Email: James.M.Potts@uscg.mil
Phone: (504) 846-6146
Name: DC1 Jacob Burns
Email: Jacob.W.Burns@uscg.mil
Phone: (571) 610-4006
END OF SECTION
File details come from the government source that posted it. Updated .