Section_J_-Att_No__001_SOW.pdf

Statement of Work: Sequoia and Kings Canyon national Park

TRANSFER CASE for Larue T-95 Heavy-Duty, Self-Propelled All Wheel Drive Dual Engine

Rotary Snow Blower.

Specifications:

• Transfer Case must be programmed by Larue to be compatible with Larue T-95 HEAVY-

DUTY, SELF-PROPELLED ALL-WHEEL DRIVE DUAL ENGINE ROTARY SNOW

BLOWER and meet all specs below.

• Must match existing transfer case (LAR 096270 Transfer Case, Fabco TC-170 PD 50/50) and mount to existing mounting brackets and be able to couple with forward and rear drive lines with no modifications.

• The transfer case shall be two-speed, rear axle disconnect type.

• Hi-low range selection shall be electric over air actuated operated from the cab and equipped with Smart Shift® to eliminate range shifting at excessive speeds.

• For vehicle and equipment protection, if the shift is not completed by the electric/air system within one minute, the system shall cease attempts at range shift and notify the operator of the failure by a flashing light at the control switch.

• Operating range of the transfer case must be capable to be displayed on the main dash

LCD screen.

• Transfer case shall have a torque transmission capacity exceeding the maximum torque developed by the engine and transmission and shall be approved for the application and be manufactured by the chassis builder for positive integration with drive system.

• Must be compatible with Allison transmission 4500RDS_P – electronically controlled four-speed automatic minimum, with a low gear ratio of 3.51:1, and shall be supplied with the appropriate torque converter for this application.

• Transfer Case must be delivered to:

Saunders Automatic Service

1720 H St. Fresno CA. 93271

Phone: 559-233-5001

Period of Performance:

Within 7 days of award

RFQ 140P8622Q0012

Section J -Att No. 001