SATPC0040563 Tab 04 4 SOW..pdf

Statement of Work – Upper Wing/Elevon Heater Carriage Fabrication

1.0 Introduction/Background: NASA Armstrong Flight Research Center (AFRC) has designed a test support structure called the Upper Wing and Elevon Heater Carriages for an upcoming ground test effort and is looking for a vendor to fabricate and deliver the Wing and Elevon Carriage components per the design drawings provided by NASA AFRC.

2.0 Scope of Work: This statement of work (SOW) pertains to the fabrication of test hardware components for the Upper Wing and Elevon Heater Carriages per the provided design drawings.

3.0 Objectives: The fabrication of the Upper Wing and Elevon Heater Carriage components will be one structure in the overall test setup design being formulated by NASA AFRC.

4.0 Description of the Work/Contractor Tasks: Contractor is to fabricate and deliver the components for the Upper Wing and Elevon Heater Carriages per the drawings identified in the section noted “Government furnished information.” To preserve the NASA AFRC project schedule, the contractor is requested to complete the Upper Wing and Elevon Heater Carriage component fabrications and delivery within a maximum of 12 weeks after contract award. Fabrication and delivery times earlier than 12 weeks are desirable. The technical point-of-contact is as follows and is available to answer questions regarding the Upper Wing and Elevon Heater Carriage component fabrications.

NASA Armstrong Flight Research Center Edwards, California 93523 Or

NASA Armstrong Flight Research Center New Horizons Aeronautics - Astrion Edwards, California 93523

5.0 Deliverables: Upon completion of the Upper Wing and Elevon Heater Carriage fabrications, the components are to be shipped to the following address. Contractors are to inform NASA one week in advance of the Upper Wing and Elevon Heater Carriage hardware delivery to coordinate the delivery logistics.

NASA Armstrong Flight Research Center Lilly Ave Edwards, CA 93524

Other Considerations:

As part of the proposal submission, contractors are asked to provide information on the following:

• A manufacturing process plan for how the Upper Elevon Heater Carriage components will be fabricated.

• A quality plan for ensuring dimensional tolerances.

mailto:Larry.d.hudson@nasa.gov mailto:nicholas.j.bierschwal@nasa.gov

Best Value Evaluation:

Note that NASA AFRC intends to perform a “best value” evaluation of all market research collected by the NASA Shared Services Center (NSSC) in association with procurement of the Upper Wing and Elevon Heater Carriage components. The best value will be determined by a collective evaluation of the following criteria:

• Lowest price

• Fabrication duration

• Past performance information:

• Three (3) references for work performed within the past three (3) years

• Current contact name, e-mail address, and telephone number for each

• Description of the work performed for each

• Technical acceptability

Milestones: The contractor is requested to provide status of fabrication process by email to the Technical POC at the end of every three weeks.

Government-furnished property: No Government furnished property will be provided.

Government-furnished information – NASA AFRC is supplying the following drawings which pertain to both the Upper Wing and Elevon Heater Carriage components that are to be fabricated.

Upper Wing Heater Carriage Components

• FLL-HPROJ-0066 Title: UPPER WING DOLLY

Part Number Qty Nomenclature

FLL-HPROJ-0066-103 2 I-BEAM ASSY

FLL-HPROJ-0066-003 1 C-CHANNEL

FLL-HPROJ-0066-005 1 C-CHANNEL

• FLL-HPROJ-0068 Title: UPPER WING CARRIAGE FRAME

Part Number Qty Nomenclature

FLL-HPROJ-0068-101 1 UPPER WING CARIAGE

FLL-HPROJ-0068-045 6 SMALL SURFACE BEARING PLATE (extras)

• FLL-HPROJ-0069 Title: UPPER WING CARRIAGE REFLECTOR FRAME ASSEMBLY

Part Number Qty Nomenclature

FLL-HPROJ-0069-103 1 REFLECTOR FRAME BASE ASSEMBLY

FLL-HPROJ-0069-001 3 WIDE C-CHANNEL

FLL-HPROJ-0069-003 2 NARROW C-CHANNEL

FLL-HPROJ-0069-013 9 RETAINER PLATE

• FLL-HPROJ-0070 Title: UPPER WING MANIFOLD BRACKET ASSEMBLY

Part Number Qty Nomenclature

FLL-HPROJ-0070-101 1 MANIFOLD BRACKET ASSEMBLY

• FLL-HPROJ-0072 Title: UPPER WING ACTUATOR MOUNTS

Part Number Qty Nomenclature

FLL-HPROJ-0072-105 1 OUTBOARD ACTUATOR MOUNT

FLL-HPROJ-0072-005 1 INBOARD MOUNT, CHANNEL

FLL-HPROJ-0072-007 2 BEARING PLATE

FLL-HPROJ-0072-013 2 CLEVIS

• FLL-HPROJ-0110 Title: UPPER WING INBOARD AXLE ASSEMBLY

Part Number Qty Nomenclature

FLL-HPROJ-0110-103 1 LIFTING BEAM ASSEMBLY

FLL-HPROJ-0110-105 2 AXLE FLANGE

FLL-HPROJ-0110-009 2 LIFT TUBE CONNECTOR

FLL-HPROJ-0110-011 2 COLLAR

FLL-HPROJ-0110-013 1 AXLE TUBE

• FLL-HPROJ-0112 Title: OUTBOARD FLIFTING LINKAGE

Part Number Qty Nomenclature

FLL-HPROJ-0112-101 1 OUTBOARD LIFTING LINKAGE ASSEMBLY

• FLL-HPROJ-0113 Title: HOOK MOUNT ASSEMBLY

Part Number Qty Nomenclature

FLL-HPROJ-0113-105 1 HOOK MOUNT ASSEMBLY

FLL-HPROJ-0113-107 1 HOOK MOUNT ASSEMBLY

FLL-HPROJ-0113-011 1 TORSION BAR

FLL-HPROJ-0113-013 1 HANDLE TUBE

FLL-HPROJ-0113-015 1 ROD

FLL-HPROJ-0113-017 1 HANDLE

• FLL-HPROJ-0114 Title: MOUNT PARTS

Part Number Qty Nomenclature

FLL-HPROJ-0114-101 1 AXLE PLATE

FLL-HPROJ-0114-103 4 MOUNT PLATE

FLL-HPROJ-0114-105 3 PLATE

FLL-HPROJ-0114-107 3 CLEVIS

• FLL-HPROJ-0115 Title: MOUNT LINKAGES

Part Number Qty Nomenclature

FLL-HPROJ-0115-001 3 LINKAGE

• FLL-HPROJ-0116 Title: ROD RECEPTACLES

Part Number Qty Nomenclature

FLL-HPROJ-0116-101 2 ROD RECEPTACLE ASSEMBLY

FLL-HPROJ-0116-103 2 ROD RECEPTACLES ASSEMBLY

• FLL-HPROJ-0119 Title: LINEAR BEARING ROD

Part Number Qty Nomenclature

FLL-HPROJ-0119-101 2 ROD

FLL-HPROJ-0119-103 2 ROD

• FLL-HPROJ-0120 Title: LINKAGE DETAILS

Part Number Qty Nomenclature

FLL-HPROJ-0120-101 64 ROD END (LH THREAD W/ MOD)

FLL-HPROJ-0120-103 12 TURN BUCKLE, 4-INCHE

FLL-HPROJ-0120-105 52 TURN BUCKLE, 6-INCH

FLL-HPROJ-0120-107 2 TURN BUCKLE, 8-INCH

FLL-HPROJ-0120-109 2 TURN BUCKLE, 11-INCH

FLL-HPROJ-0120-111 2 ROD END (LH THREAD W/MOD + EXTRA

THREAD)

• FLL-HPROJ-0121 Title: PULLY ASSEMBLY

Part Number Qty Nomenclature

FLL-HPROJ-0121-001 2 PLATE, PULLY

FLL-HPROJ-0121-003 2 PLATE

FLL-HPROJ-0121-005 1 SPACER

FLL-HPROJ-0121-007 6 SPACER

FLL-HPROJ-0121-009 1 SPACER

FLL-HPROJ-0121-011 2 ANGLE

Upper Elevon Heater Carriage Components

• FLL-HPROJ-0050 Title: ELEVON DOLLY FABRICATION

Part Number Qty Nomenclature

FLL-HPROJ-0050-101 2 ELEVON DOLLY FABRICATION

• FLL-HPROJ-0074 Title: ELEVON WATER MANIFOLD BRACKET

Part Number Qty Nomenclature

FLL-HPROJ-0074-101 1 ELEVON WATER MANIFOLD BRACKET

• FLL-HPROJ-0053 Title: ELEVON AXIS FEATURES

Part Number Qty Nomenclature

FLL-HPROJ-0053-101 2 ROOT HINGE LINE AXIS FEATURE

FLL-HPROJ-0053-103 4 IN/OUTBOARD HINGE LINE AXIS FEATURE

• FLL-HPROJ-0046 Title: INBOARD REFLECTOR FRAME

Part Number Qty Nomenclature

FLL-HPROJ-0046-101 1 INBOARD REFLECTOR FRAME

• FLL-HPROJ-0073 Title: KUCHEMANN FRAME FABRICATION

Part Number Qty Nomenclature

FLL-HPROJ-0073-101 2 KUCHEMANN FRAME

• FLL-HPROJ-0047 Title: OUTBOARD REFLECTOR FRAME

Part Number Qty Nomenclature

FLL-HPROJ-0047-101 1 OUTBOARD REFLECTOR FRAME

• FLL-HPROJ-0075 Title: UPPER HEATER ROOT LOCKING PLATE

Part Number Qty Nomenclature

FLL-HPROJ-0075-101 4 UPPER HEATER ROOT LOCKING PLATE

• FLL-HPROJ-0051 Title: ELEVON ACTUATOR MOUNTS

Part Number Qty Nomenclature

FLL-HPROJ-0051-101 1 ELEVON INBOARD ACTUATOR MOUNT

FLL-HPROJ-0051-103 1 ELEVON OUTBOARD ACTUATOR MOUNT

FLL-HPROJ-0051-105 1 ELEVON ROOT ACTUATOR MOUNT

• FLL-HPROJ-0049 Title: UPPER ELEVON CARRIAGE FRAME FABRICATION

Part Number Qty Nomenclature

FLL-HPROJ-0049-101 1 UPPER ELEVON CARRIAGE FRAME

FABRICAITION

• FLL-HPROJ-0052 Title: LIFTING BAR FAB

Part Number Qty Nomenclature

FLL-HPROJ-0052-101 1 LIFTING BAR FAB

• FLL-HPROJ-0088 Title: UPPER ELEVON ROOT LIFTING LIN

Part Number Qty Nomenclature

FLL-HPROJ-0088-101 3 UPPER ELEVON ROOT LIFTING LINK

• FLL-HPROJ-0089 Title: UPPER ELEVON ROOT LIFTING CLEVIS

Part Number Qty Nomenclature

FLL-HPROJ-0089-101 3 UPPER ELEVON ROOT LIFTING CLEVIS

• FLL-HPROJ-0048 Title: ROOT FRAME FABRICATION

Part Number Qty Nomenclature

FLL-HPROJ-0048-101 1 ROOT FRAME FABRICATION

• FLL-HPROJ-0085 Title: UPPER ELEVON AXIS ALIGNMENT RODS

Part Number Qty Nomenclature

FLL-HPROJ-0085-101 1 UPPER ELEVON ROOT AXIS ALIGNMENT

ROD

FLL-HPROJ-0085-103 1 UPPER ELEVON INBOARD AXIS

ALIGNMENT ROD

FLL-HPROJ-0085-105 1 UPPER ELEVON OUTBOARD AXIS

ALIGNMENT ROD

• FLL-HPROJ-0086 Title: UPPER ELEVON INBOARD REFLECTOR FRAME

BRACKET

Part Number Qty Nomenclature

FLL-HPROJ-0086-101 2 UPPER ELEVON INBOARD REFLECTOR

FRAME BRACKET

• FLL-HPROJ-0087 Title: UPPER ELEVON OUTBOARD REFLECTOR FRAME

BRACKETS

Part Number Qty Nomenclature

FLL-HPROJ-0087-101 2 UPPER ELEVON OUTBOARD REFLECTOR

FRAME BRACKET

• FLL-HPROJ-0094 Title: UPPER ELEVON IN/OUTBOARD C CHANNEL

Part Number Qty Nomenclature

FLL-HPROJ-0094-101 4 UPPER ELEVON IN/OUTBOARD C

CHANNEL

• FLL-HPROJ-0092 Title: UPPER ELEVON IN/OUTBOARD LS

Part Number Qty Nomenclature

FLL-HPROJ-0092-101 1 UPPER ELEVON INBOARD ANGLE

FLL-HPROJ-0092-103 2 UPPER ELEVON OUTBOARD ANGLE

• FLL-HPROJ-0097 Title: HEATER LINEAR RAIL HOUSING

Part Number Qty Nomenclature

FLL-HPROJ-0097-101 2 HEATER LINEAR RAIL HOUSING

• FLL-HPROJ-0091 Title: UPPER ELEVON DOLLY C CHANNEL

Part Number Qty Nomenclature

FLL-HPROJ-0091-101 2 UPPER ELEVON DOLLY C CHANNEL

• FLL-HPROJ-0098 Title: UPPER ELEVON ACTUATOR CLEVISES

Part Number Qty Nomenclature

FLL-HPROJ-0098-101 1 ROOT CLEVIS

FLL-HPROJ-0098-103 2 IN/OUTBOARD CLEVIS

• FLL-HPROJ-0093 Title: UPPER ELEVON IN/OUTBOARD LOCKS

Part Number Qty Nomenclature

FLL-HPROJ-0093-001 2 INBOARD U SECTION

FLL-HPROJ-0093-003 2 OUTBOARD U SECTION

FLL-HPROJ-0093-005 4 STIFFENER PLATE

• FLL-HPROJ-0096 Title: UPPER HEATER LINEAR RAIL

Part Number Qty Nomenclature

FLL-HPROJ-0096-101 2 UPPER HEATER LINEAR RAIL

• FLL-HPROJ-0100 Title: UPPER ELEVON ROOT HINGE LINE BRACKETS

Part Number Qty Nomenclature

FLL-HPROJ-0100-101 1 AFT ROOT HINGE LINE BRACKET

FLL-HPROJ-0100-103 1 FWD HINGE LINE BRACKET

• FLL-HPROJ-0101 Title: UPPER ELEVON ROOT HINGE LINE BRACKETS

Part Number Qty Nomenclature

FLL-HPROJ-0101-101 1 KUCHEMANN ANGLE 1

FLL-HPROJ-0101-103 1 KUCHEMANN ANGLE 2

The contractor shall document and provide NASA information regarding any requested changes / modifications to drawings/models identified during the fabrication process.