SATPC0036526 Tab 04 4 SOW.pdf
PDF 101 KB Posted
- Attached to
- North Texas Research Station Building Refresh Federal contract opportunity
- Solicitation number
- 80NSSC24881966Q
About this file
This document is a Statement of Work (SOW) for a federal contract opportunity to perform building refresh services at the NASA North Texas Research Station. The key objectives are to paint and repair entryway and conference room walls, repaint the exterior, install a NASA logo, replace lights, and replace carpet in the hallways, conference room, and offices. The required work includes removing and replacing carpet in approximately 922 square feet of hallways, with additional quotes for the conference room (479 square feet) and offices (1,520 square feet); removing and repainting wallpaper in the conference room and entryway; repairing cracks and painting lab walls; replacing damaged ceiling tiles; replacing light fixtures with LED lights; repainting the exterior blue stripe; and installing a 4-foot diameter NASA "meatball" logo. The work must be performed by U.S. citizens at the NASA North Texas Research Station in Fort Worth, Texas, immediately following the award date.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| VENDOR QUESTIONS 9-12.pdf | ||
| SATPC0036526 Tab 10 RFQ Open Market.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
OBJECTIVE
To paint and repair entryway and conference room walls, repaint exterior stripe and doors, install exterior NASA logo, replace lights, and replace carpet at the North Texas Research Station.
SCOPE OF WORK
1. Remove and replace carpet in the hallways of the building (approximately 922 sq. ft.).
Include additional quotes for replacing the carpet in the conference room (approximately an additional 479 sq. ft.) and all of the offices (approximately an additional 1520 sq. ft.).
Note that these two latter locations would require breakdown and reassembly of the conference room table and the office furniture.
2. Remove wallpaper in conference room and entryway, repair walls as needed, and paint (approximately 1023 sq. ft.).
3. Repair cracks in hallway and lab walls, and paint repaired areas to match current paint.
Include quote to repaint the entire lab.
4. Replace damaged ceiling tiles in the conference room and the lab.
5. Replace light fixtures throughout the building with ones that will accept LED lights.
NOTE: The current lights are on a 480 V circuit and consist of 53 2’ by 4’ fluorescent fixtures with three bulbs each, and 34 compact fluorescent dome lights.
6. Repaint blue stripe around upper outside portion of the building.
7. Incorporate 4’ diameter metal NASA “meatball” logo on the northern end of the front of the building or on a freestanding concrete support near the northwestern corner of the building.
8. Paint the exterior of three doors to match the blue stripe on the building. Replace the weather seal on the glass doors on the front of the building.
SPECS
1. NASA North Texas Research Station
2. The building is located on the grounds of an FAA flight control center, all personnel working on site must be U. S. citizens and must produce a U. S. passport or a government-issued Real ID as proof of citizenship.
PLACE OF PERFORMANCE
NASA North Texas Research Station 13800 FAA Blvd Fort Worth, TX 76155
PERIOD OF PERFORMANCE
Installation shall be performed immediately after awarded date.
File details come from the government source that posted it. Updated .