SATPC0036256 Tab 04 4 SOW_Redacted.pdf

RFP #

STATEMENT OF WORK

Load Moment Indicator for Broderson 8K lbs. Mobile Crane, Model IC-35-2B

Code 720, Institutional Safety Branch

National Aeronautics and Space Administration Dryden Flight Research Center Edwards, California

RFP/Contract No. SOW Title Date or Version #

Table of Contents

1.0 Background

2.0 Objectives

3.0 Requirements

4.0 Deliverables

5.0 Period of Performance

6.0 Travel

7.0 Other Special Requirements and Considerations

RFP/Contract No. Load Moment Indicator for Broderson 8K lbs. Mobile Crane, Model IC-35-2B July 31, 2024

1.0 Background

• The Broderson 8K mobile crane Load Moment Indicator (LMI) is a peripheral device for the operator to monitor essential information such as load weight, radius capacity, boom angle, length, radius, anti-two block warning, and optional anemometer.

• The current LMI has failed and is no longer able to receive manufacturer service because it has exceeded its life expectancy.

• The failure of this system impacts critical center/agency mission support and future business at the center.

2.0 Objectives

• The LMI will maintain the crane system’s compliance with NASA-Std, OSHA, and

ASME.

• The LMI replacement provides crane operators with critical information to ensure safety and stability during lifting operations.

3.0 Requirements

Unit shall meet or exceed the following requirements:

• Display sizes of 10.4 inches o Vendor shall provide fixed mounting hardware securing the display in a location visible to the operator, and without interfering with operator controls.

• High resolution LCD screen readable in direct sunlight and with dimmable backlit at night, with accurate color images

• Large integral memory 2GB and processor speed (600/800 MHz)

• Provides inputs and outputs on the CANbus network

• Self-diagnostic detection of system malfunction

• Uploading of new information via a USB Stick-No special tools or laptop required with all calibration done from the display screen

• Display rating up to IP67 and suitable for an indoor or outdoor environment and a temperature range of

• -20° C to 70°C (-4'F to 158'F). Optional extended temperature of -40° C to 85° C (-40'F to 185'F)

• Supply voltage 11 to 36 vdc

• Audible and visual alarms

• Output connection for lock-out circuit for overload and ATB

• Self - diagnostic mode with fault log

• CPU and Display in one unit

• Slip-rings may be required at articulating joints

• 2-year parts and on-site (NASA, Armstrong Flight Research Center) labor warranty

Purchase of a new 2024 or newer LMI compatible with Broderson 8K lbs. Mobile Crane, Model IC-35-2B, and must include delivery to AFRC.

Delivery Information:

NASA Armstrong Flight Research Center

Bldg. 4876 Warehouse #6, Lilly Drive Edwards AFB, CA 93523

Business hours of AFRC are Monday thru Thursdays 8-to 3pm daily.

4.0 Deliverables

• Vendor shall provide all tools and/or peripheral devices necessary to perform equipment installation.

• Vendor shall provide documentation that demonstrates the equipment is functioning properly.

• Vendor is responsible for the delivery of new LMI and its installation.

• Vendor is responsible for ensuring the new LMI is physically and operationally compatible with the Broderson 8K lbs. Mobile Crane, Model IC-35-2B.

• Vendor is responsible for providing all electrical and data communication cabling and connectors that interface with LMI sensors, controller, and anemometer.

5.0 Period of Performance

• Delivery is required No later than 30 December 2024.

6.0 Travel

• Vendor is to provide any travel expense with their quote.

7.0 Other Special Requirements and Considerations

• Deliveries shall be scheduled in advance by calling (661) 276-3255.

REVISIONS

Revision Number Date Brief Summary of Changes

Base