Sample_contract_16649.pdf

Rev. July 2023

State of Minnesota Contract

SWIFT Contract Number:

This Contract is between the State of Minnesota, acting through its Department of Natural Resources (“State”) and [Contractor] whose designated business address is [Contractor’s business address] (“Contractor”). State and Contractor may be referred to jointly as “Parties.”

Recitals

Instruction: Modify the Recitals section as necessary to address the specifics of the contract history. The text below is sample language that may be used when the contract was solicited.

1. State issued a solicitation identified as SWIFT Event 2000016649 THE PURPOSE OF THE SOLICITATION IS

TO ESTABLISH A CONTRACT WITH A VENDOR FOR A ONE TIME REPAIR FOR A 2008 JOHN DEERE 650JLGP

2. Contractor provided a response to the Solicitation indicating its interest in and ability to provide the goods or services requested in the Solicitation; and

3. Subsequent to an evaluation in accordance with the terms of the Solicitation, the Parties desire to enter into a contract.

Accordingly, the Parties agree as follows:

Contract

Term of Contract

Effective date. January 24 2025, or the date the State obtains all required signatures under Minn. Stat.

§ 16C.05, subd. 2, whichever is later. The Contractor must not begin work under this Contract until this Contract is fully executed and the Contractor has been notified by the State’s Authorized Representative to begin the work.

Expiration date. January 23 2026, or until all obligations have been satisfactorily fulfilled, whichever occurs first. The contract may be extended for up to an additional months in increments as determined by the State, through a duly executed amendment.

[Delete for one time buy] Contract Use. This Contract is not exclusive and shall not be construed as guarantying a minimum or maximum amount of usage.

Contractor’s Duties The Contractor shall perform all duties described in this Contract to the satisfaction of the State.

Representations and Warranties

Under Minn. Stat. §§ 15.061 and 16C.03, subd. 3, and other applicable law [Insert additional statutory authorization if necessary] the State is empowered to engage such assistance as deemed necessary.

Contractor warrants that it is duly qualified and shall perform its obligations under this Contract in accordance with the commercially reasonable standards of care, skill, and diligence in Contractor’s industry, trade, or profession, and in accordance with the specifications set forth in this Contract, to the satisfaction of the State.

Contractor warrants that it possesses the legal authority to enter into this Contract and that it has taken all actions required by its procedures, by-laws, and applicable laws to exercise that authority, and to lawfully authorize its undersigned signatory to execute this Contract, or any part thereof, and to bind Contractor to its terms.

Time The Contractor must comply with all the time requirements described in this Contract. In the performance of this Contract, time is of the essence.

Compensation and Conditions of Payment

Compensation. The State will pay for performance by the Contractor under this Contract in accordance with the breakdown of costs as set forth in Exhibit D which is attached and incorporated into this Contract.

Conditions of Payment. All duties performed by the Contractor under this Contract must be performed to the State’s satisfaction and in accordance with all applicable federal, state, and local laws, ordinances, rules, and regulations including business registration requirements of the Office of the Secretary of State.

The Contractor will not receive payment for work found by the State to be unsatisfactory or performed in violation of federal, state, or local law.

Authorized Representative

State’s Authorized Representative. The State's Authorized Representative is [name, title, address, telephone number], or his/her successor or delegate, and has the responsibility to monitor the Contractor’s performance and the authority to accept the services delivered or goods received under this Contract. If the services are satisfactory, the State's Authorized Representative will certify acceptance on each invoice submitted for payment.

Contractor’s Authorized Representative. The Contractor's Authorized Representative is [name, title] at the following business address and telephone number: [insert business address and telephone number], or his/her successor. If the Contractor’s Authorized Representative changes at any time during this Contract, the Contractor must immediately notify the State.

Exhibits [Note: Be mindful of this order of precedence when deciding where to include additional exhibits in this clause.] The following Exhibits are attached and incorporated into this Contract. In the event of a conflict between the terms of this Contract and its Exhibits, or between Exhibits, the order of precedence is first the Contract, and then in the following order:

Exhibit A: Contract Terms Exhibit B: Insurance Requirements Exhibit C: Specifications, Duties, and Scope of Work Exhibit D: Price and Payment Schedule

1. State Encumbrance Verification Individual certifies that funds have been encumbered as required by Minn. Stat. §§ 16A.15 and 16C.05

3. State Agency With delegated authority

Print name: Print name:

Signature: Signature:

Title: Date: Title: Date:

SWIFT Contract No.:

2. Contractor The Contractor certifies that the appropriate person(s) have executed the Contract on behalf of the Contractor as required by applicable articles, bylaws, resolutions, or ordinances.

4. Commissioner of Administration As delegated by The Office of State Procurement

Print name: Print name:

Signature: Signature:

Title: Date: Title: Date:

Exhibit A: Contract Terms

Prompt Payment and Invoicing.

Prompt Payment. The State will pay the Contractor pursuant to Minn. Stat. § 16A.124, which requires payment within 30 days following receipt of an undisputed invoice, or merchandise or service, whichever is later.

Terms requesting payment in less than 30 days will be changed to read “Net 30 days.” Notwithstanding the foregoing, the State may pay the Contractor in advance for purchases as allowed pursuant to Minn. Stat. §16A.065.

The payment for each order will only be made for goods received or services actually performed that have been accepted by the ordering entity, and meet all terms, conditions, and specifications of the Contract and the ordering document.

Invoicing. At a minimum the invoice must meet the requirements found on Exhibit D which provides a list of minimum invoice requirements.

Assignment, Amendments, Waiver, and Contract Complete.

Assignment. The Contractor may neither assign nor transfer any rights or obligations under this Contract without the prior consent of the State and a fully executed assignment agreement, executed and approved by the authorized parties or their successors.

Amendments. Any amendment to this Contract must be in writing and will not be effective until it has been executed and approved by the authorized parties or their successors.

Waiver. If the State fails to enforce any provision of this Contract, that failure does not waive the provision or its right to enforce it.

Contract Complete. This Contract contains all negotiations and agreements between the State and the Contractor. No other understanding regarding this Contract, whether written or oral, may be used to bind either party.

Termination.

Termination for Convenience. The State or Commissioner of Administration may cancel this Contract at any time, with or without cause, upon 30 days’ written notice to the Contractor. Upon termination for convenience, the Contractor will be entitled to payment, determined on a pro rata basis, for services or goods satisfactorily performed or delivered.

Termination for Breach. If the Contractor fails to perform according to the contract terms and conditions, the State is authorized to immediately cancel the Contract or purchase order, or any portion of it, and may obtain replacement goods or services and charge the difference of costs to the defaulting Contractor. In the event of default, the State reserves the right to pursue any other remedy available by law. A Contractor may be removed from the vendors list, suspended or debarred from receiving a Contract for failure to comply with terms and conditions of the Contract, or for failure to pay the State for the cost incurred on the defaulted Contract.

Termination for Insufficient Funding. The State may immediately terminate this Contract if it does not obtain funding from the Minnesota Legislature, or other funding source; or if funding cannot be continued at a level sufficient to allow for the payment of the services addressed within this Contract. Termination must be by written notice to the Contractor. The State is not obligated to pay for any services that are provided after notice and effective date of termination. However, the Contractor will be entitled to payment, determined on a pro rata basis, for services satisfactorily performed to the extent that dedicated funds are available. The State will not be assessed any penalty if the Contract is terminated because of the decision of the Minnesota Legislature, or other funding source, not to appropriate funds. The State must provide the Contractor notice of the lack of funding. This notice will be provided within a reasonable time of the State’s receiving notice.

Force Majeure.

Neither party shall be responsible to the other or considered in default of its obligations within this Contract to the extent that performance of any such obligations is prevented or delayed by acts of God, war, riot, disruption of government, or other catastrophes beyond the reasonable control of the party unless the act or occurrence could have been reasonably foreseen and reasonable action could have been taken to prevent the delay or failure to perform. A party relying on this provision to excuse performance must provide the other party prompt written notice of the inability to perform and take all necessary steps to bring about performance as soon as practicable.

Indemnification.

In the performance of this Contract, the Indemnifying Party must indemnify, save, and hold harmless the State, its agents, and employees, from any claims or causes of action, including attorney’s fees incurred by the State, to the extent caused by Indemnifying Party’s:

• Intentional, willful, or negligent acts or omissions; or

• Actions that give rise to strict liability; or

• Breach of contract or warranty.

The Indemnifying Party is defined to include the Contractor, Contractor’s reseller, any third party that has a business relationship with the Contractor, or Contractor’s agents or employees, and to the fullest extent permitted by law.

The indemnification obligations of this section do not apply in the event the claim or cause of action is the result of the State’s sole negligence. This clause will not be construed to bar any legal remedies the Indemnifying Party may have for the State’s failure to fulfill its obligation under this Contract.

Nothing within this Contract, whether express or implied, shall be deemed to create an obligation on the part of the State to indemnify, defend, hold harmless or release the Indemnifying Party. This shall extend to all agreements related to the subject matter of this Contract, and to all terms subsequently added, without regard to order of precedence.

Governing Law, Jurisdiction, and Venue.

Minnesota law, without regard to its choice-of-law provisions, governs this Contract. Venue for all legal proceedings out of this Contract, or its breach, must be in the appropriate state or federal court with competent jurisdiction in Ramsey County, Minnesota.

Contract Use by State Agencies.

To the extent applicable, the Contract does not prohibit state agencies from using their delegated purchasing authority to procure similar goods and services from other sources.

Warranty.

The Contractor warrants to the ordering entity that materials and equipment furnished under the Contract will be free from defects not inherent in the quality required or permitted, and that the work will conform to the requirements of the contract. Work not conforming to these requirements, including substitutions not properly approved and authorized in writing may be considered defective. The Contractor’s warranty excludes remedy for damage or defect caused by abuse, modifications not executed by the Contractor, improper or insufficient maintenance, improper operation, or normal wear and tear and normal usage. If requested, the Contractor shall furnish satisfactory evidence as to the kind and quality of materials and equipment used.

All installation materials and labor shall be guaranteed for a period of one (1) year following the date of final acceptance.

During the first year following acceptance, the Contractor shall, upon notification by the ordering entity of any malfunctions, make necessary repairs, including labor, travel, and materials, at the Contractor’s expense.

Original Equipment Manufacturer (OEM Warranty).

The equipment offered must include the OEM standard warranty. The Contractor is responsible for the cost of any inspections, adjustments, warranted parts, and labor charges to repair or replace warranted parts that are a result of equipment failure(s) during the warranty period. This shall be performed promptly unless otherwise mutually agreed in writing by the Customer and the Contractor. This warranty shall commence when the unit is put into service.

OEM Extended Warranty Options. If the Contractor provides an OEM Extended Warranty Option, the Contractor must provide a copy of the applicable terms and conditions, including a detail of coverage, to the State upon request. The cost of an OEM Extended Warranty must include all associated costs.

Contractor (Add-On) Warranty Options. The Contractor may provide additional warranty options, which include, but are not limited to travel pickup, or delivery charges that are a result of equipment failure(s) prior to or during the warranty period or extended warranty period. This warranty option shall commence when the unit is put into service and is in addition to OEM warranty options stated above.

Delivery.

Contractor is obligated to deliver within the quoted lead times. If delivery is not made within that time frame, the State reserves the right to deem the Contractor in default.

Contractor must confirm delivery locations and requirements with the ordering entity. Prior to delivery, the Contractor is responsible for confirming in writing with the ordering entity that the delivery location will accommodate unloading the equipment. Contractor must notify the receiving entity at least 72 hours before delivery to allow for inspection and compliance. No delivery can be made on a State Holiday (as defined in Minn. Stat. § 645.44, subd. 5), on Saturday or Sunday, or after 4:00 p.m. Central Time on weekdays, without prior written approval by the receiving entity.

Risk of Loss.

The State is relieved of all risks of loss or damage to the goods and equipment during periods of transportation, installation by the Contractor, or while in the possession of the Contractor or its agent.

The parties agree that there is no minimum order requirements or charges to process an individual purchase order unless otherwise stated in the Contract. The Purchase Order number must appear on all documents (e.g., invoices, packing slips, etc.).

The Contractor must accept a purchasing card for order placement in addition to accepting a purchase order, without passing the processing fees for the purchasing card back to the State. The State’s single purchase maximum on the Contract is $5,000 on the purchasing card, but it may be increased with the State’s and the Contractor’s approval.

12. Equipment Specifications.

All equipment must meet the contract specifications and all federal and State safety codes and regulations in effect at the date of manufacture. All equipment must be Original Equipment Manufacturer (OEM) equipment unless otherwise stated in the contract.

Items Offered as New.

All products, materials, supplies, replacement parts, and equipment offered and furnished must be new, of current manufacturer production, and must have been formally announced by the manufacturer as being commercially available, unless otherwise stated in this Contract.

Equipment Trade-In.

If requested in writing by the ordering entity, the Contractor may allow equipment to be used as trade-in against new contract equipment purchases. Trade-ins will be allowed on a case-by-case basis, and the ordering entity has the right to refuse any offer made by the Contractor. All equipment will be traded “as is, where is,” with no guarantee express or implied.

Title to the trade-in equipment will transfer to the Contractor when the new equipment is delivered and accepted by the ordering entity, unless otherwise agreed to in writing by the Contractor and the ordering entity. The ordering entity assumes all costs associated with the title transfer of the trade-in equipment unless otherwise agreed to in writing by the Contractor and the ordering entity. The title of State equipment trade-ins shall be provided to the Contractor in accordance with Minn. Stat. § 168A.11.

Product Changes During the Contract.

All product offered should be available during the initial term of the contract. The Contractor must notify the State’s Authorized Representative immediately if the manufacturer discontinues or replaces a contracted model number. A replacement model number must meet the contract specifications. The State is under no obligation to accept a replacement model. Any change to a contracted model number must be confirmed in writing by the State through a written amendment. The State reserves the right to request documentation for any requested change under this section to evaluate how the specifications of the replacement product deviates from the specifications of the replaced product.

15. Product Returns.

Non-Defective Conforming Product. The Customer may return an unopened, non-defective product conforming to the specifications of an order within 60 calendar days of the invoice date with no additional fees. If the non-defective conforming product is returned within 60 calendar days of the invoice date after it has been opened, the Contractor may charge the Customer a restocking fee of up to 10% of the cost of the product. Return shipping costs to return a non-defective conforming product to the Contractor is the responsibility of the Customer.

Defective or Non-conforming Product. The Customer may return any product determined by the Customer as defective or not conforming to the specifications, order, or contract, within 60 calendar days of receipt with no restocking or return shipping fee.

The Contractor should provide the Customer with a Return Merchandise Authorization number (RMA) and must arrange for a “call tag” to be issued via a “carrier” to order pick up of the defective or non-conforming product from the Customer. The “carrier” must pick up the defective or non-conforming product at the address to which the product was shipped.

Replacement of Defective or Non-conforming Product. The Customer may request the Contractor provide a replacement product or cancel the order. If the Customer choses to have the defective or non-conforming product replaced, the Contractor must replace a defective or non-conforming product at no cost to the Customer.

Return of Defective or Non-conforming Product (without replacement). The Customer’s account must be credited within fourteen (14) calendar days of arrival of the returned product at the Contractor’s location.

The amount to be credited must be the equal of the price of the product plus all freight, shipping, handling, or ancillary charges associated with shipment of the product from and return to the shipping location. If, after inspection, the Contractor determines that the product is not defective or non-conforming, the Contractor may bill the Customer for the return shipping charges.

Exhibit B: Insurance Requirements

[Notice to Contractor.

The Contractor is required to submit Certificates of Insurance acceptable to the State as evidence of insurance coverage requirements prior to commencing work under this Contract.

The Contractor shall not commence work under the contract until they have obtained all the insurance described below and the State has approved such insurance. Contractor shall maintain such insurance in force and effect throughout the term of this Contract, unless otherwise specified in this Contract

The failure of the Contractor to provide a Certificate of Insurance, for the policies required under this Contract or renewals thereof, or failure of the insurance company to notify the State of the cancellation of policies required under this Contract shall not constitute a waiver by the State to the Contractor to provide such insurance.

The State reserves the right to immediately terminate this Contract if the Contractor is not in compliance with the insurance requirements and retains all rights to pursue any legal remedies against the Contractor. All insurance policies must be open to inspection by the State, and copies of policies must be submitted to the State’s Authorized Representative upon written request.

Because the Contractor’s reseller(s) are independently owned and operated, and maintain their own insurance, the Contractor’s reseller's insurance coverage must be evidenced by its own Certificate of Insurance. The Contractor’s reseller’s Certificate of Insurance must meet all the insurance requirements and limits set forth in the Contract.

The Contractor shall collect, review, approve, and maintain the applicable Certificates of Insurance, including but not limited to General Liability, Auto Liability, Umbrella, Workers’ Compensation, and Garagekeepers or Property of Others, for all Contractor’s resellers that will be providing goods or services under this contract. The Contractor acknowledges compliance with this provision. The Contractor must provide copies of the dealers’ insurance documentation to the State upon request.

If a claim is made against a Contractor’s reseller, and the Contractor’s reseller’s insurance coverage did or does not cover the claim, the Contractor is responsible for the claim because the contract is with the Contractor. The Contractor must pay any uninsured claims out-of-pocket. The State may enforce the indemnity clause in the contract.

Notice to Insurer.

The Contractor’s insurance company(ies) waives its right to assert the immunity of the State as a defense to any claims made under said insurance.

Insurance certificate holder should be addressed as follows:

State of Minnesota

Exhibit C: Specifications, Duties, and Scope of Work

1. GENERAL SPECIFICATION NOTES

1.1 Responders are required to comply with all specifications for this purchase

2. EQUIPMENT WARRANTY, RECALLS, AND SERVICE UPDATES

2.1 The Contract Vendor shall be responsible for the cost of any inspections, adjustments, parts, labor, travel, pickup and/or delivery charges that are a result of equipment failure(s) prior to or during the warranty period.

2.2 The contract vendor shall be the single contact through which Customers arrange warranty work.

2.3 All warranty work must be done with the state of Minnesota unless mutually agreed by the Customer and the

Contract Vendor.

2.4 The warranty work shall be performed as soon as possible within a reasonable amount of time.

2.5 This warranty shall commence when the unit has been fully inspected upon delivery at the DNR and payment is approved.

3. LOCATION OF EQUIPMENT: VENDORS THAT BID ON THIS REPAIR SHOULD BE WITHIN 75 MILES OF THE LOCATION

LISTED AND MUST INCLUDE PICKUP FROM THIS LOCATION LISTED

1236 60TH AVE NW ROCHESTER MN 55901

4. THE PURPOSE OF THE SOLICITATION IS TO ESTABLISH A CONTRACT WITH A VENDOR FOR A ONE TIME REPAIR FOR A 2008 JOHN DEERE 650JLGP (This line number in SWIFT is line number 1 )

4.1 Specification for parts need for this repair

AT220322 Control 1

AT112928 BALL JOINT 2

19M7863 SCREW 4

AT48548 BALL JOINT 1

AT46597 BALL JOINT 2

AT48548 BALL JOINT 2

14H882 NUT 2

R11151 LOCK NUT 3

M68954 LOCK NUT 2

R11151 LOCK NUT 3

14H882 NUT 2

14H882 NUT 1

T122628 PIN FASTEN 2

M467M WASHER 4

24H1598 WASHER 8

T68818 SEAL 4

T122720 BUSHING 4

14M7328 LOCK NUT 2

19M7884 CAP SCREW 2

AT209423 HYDRAULIC 2

AT173254 HYDRAULIC 2

T174185 ELBOW FITT 2

JD7797 LUBRICATIO 2

JD7797 LUBRICATIO 2

19M8197 CAP SCREW 2

14M7517 LOCK NUT 2

T170891 PIN 2

T170880 PLATE 2

19M7784 SCREW 2

T77857 O-RING 4

AH158615 ROD 1

AH212092 HYDRAULIC 1

AHC13485 Hydraulic Cylin 1

RE34085 PISTON 1

H170538 NUT 1

H180787 Snap Ring 1

T12582 O-RING 2

H170216 Snap Ring 1

TY27718 HYDRA XR BULK 10

19M7759 CAP SCREW 6

24M7241 WASHER 6

T120978 END BIT 2

T172943 Cutting Edge 1

PB750250 BOLT 15

T10510 WASHER 15

14H1058 NUT 15

T170879 PIN 1

T178620 BUSHING 2

T174256 BUSHING 2

19M7784 SCREW 1

T170891 PIN 1

19M7784 SCREW 1

AH155619 SELF-ALIGN 1

40M7090 SNAP RING 2

AT157173 SELF-ALIGN 1

40M5099 SNAP RING 2

40M5099 SNAP RING 2

AT157173 SELF-ALIGN 1

T170879 PIN 1

T178620 BUSHING 2

T170884 BUSHING 2

19M7784 SCREW 2

RE541420 OIL FILTER 1

RE509036 FUEL FILTE 1

RE522878 FILTER ELEMENT 1

AT341498 AIR FILTER 1

AT341499 FILTER 1

T158495 PNEUMATIC 1

TY26682 PLUS-50 TM ENGI 16

AT191102 AIR FILTER 2

AT528017 FILTER ELEMENT 2

4.2 LABOR

LABOR FOR THIS REPAIR MUST INCLUDE SHOP SUPPLIES AND HAZMAT OF 2008 JOHN DEERE 650JLGP

(This line number in SWIFT is line number 2 )

Exhibit D: Pricing

Taxes.

[Option 1: Direct Pay applies.] Do not add sales tax to the prices being offered. State Agencies hold a Direct Payment Authorization Letter which is used to pay applicable taxes directly to the Department of Revenue. Contractors may go to http://www.revenue.state.mn.us to learn about the applicable sales tax (search “Fact Sheet 142”).

[Option 2: Contractor collects tax.] Contract price and quoted price must include taxes.

Invoice Requirements.

Contractor hereby waives the right to enforce any term which contradicts or modifies any term of the solicitation or any Contract that may result, including subsequent amendments to the Contract, or would result in an unencumbered expense if enforced against the state. Contract quote and invoice must contain, at a minimum: [review invoice requirements and modify to fit scope of the project.]

• Customer name

• State Contract number field

• Item/service description

• Item quantity or service hours

• List price [Cost]

• Contract discount [Contract percentage markup]

• Price after discount [Price after cost plus markup] http://www.revenue.state.mn.us/