SALIENT CHARACTERISTICS- SPECIFICATION_25Q2602.pdf
PDF 351 KB Posted
- Attached to
- FIRE SYSTEM BOOSTER PUMPS Federal contract opportunity
- Solicitation number
- SPMYM225Q2602
About this file
This document is a Salient Characteristics specification for 8010 Fire System Booster Pump procurement for Project #340-340, dated 2 Sep 2025. The requirement is for three Balco LLC Model # GBSLUCK 1029 booster pump systems (or equal), each configured as a three-stage unit. Key technical and compliance requirements include: (1) full compliance with Code of Federal Regulations (CFR) Title 29, Part 1910, (2) Nationally Recognized Testing Laboratory (NRTL) inspection and certification, and (3) comprehensive documentation requirements. The vendor must provide two hard copies of NRTL certification reports and two hard copies of detailed operator/maintenance/repair manuals that include mechanical/electrical schematics, parts lists, and a "no asbestos used" statement, all in English and imperial units.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| BILL OF MATERIALS_DRAWINGS_CUT SHEETS_ 25Q2602.pdf | ||
| SPMYM2-25-Q-2602.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics for 8010 Fire System Booster Pumps (Qty: 3) Project #340-340
2 Sep 2025
1. 8010 Fire System Booster Pumps (Qty: 3) (Balco LLC, Model # GBSLUCK 1029 or EQUAL) shall be provided. Each unit shall be a three stage booster pump system. Each booster pump shall meet the requirements listed on the attached bill of materials, drawings and cut sheets.
2. Safety Requirement - The equipment and its component parts shall be in compliance with applicable Code of Federal Regulations (CFR) Title 29, Part 1910. By definition, any equipment will be deemed acceptable and approved by TRF, Bangor, if it meets specific Occupational Safety and Health Administration (OSHA) conditions outlined in CFR Title 29, Part 1910;
Subparts "O" and "S". Specifically, equipment will be "Accepted" by TRF, Bangor, if it has been inspected and found by a Nationally Recognized Testing Laboratory (NRTL) to conform to specified plans or procedures of applicable codes. The equipment (as a whole system) shall be Nationally Recognized Testing Laboratory (NRTL) inspected and certified (by an OSHA authorized third party). A total of two (2) “hard” copies of the NRTL certification report (for all three booster pumps) shall be provided. If the equipment type/model has already been NRTL inspected and certified, a certification report (a total of two (2) ”hard” copies, for all three booster pumps) or documentation mounted on the equipment, (which acknowledges it is NRTL certified), shall be provided.
3. Operator / Maintenance / Repair Manuals - The equipment shall be furnished with a total of two (2) “hard” copies (for all three boosters) of the manufacturer’s standard Product Manual/Operation, Maintenance, and Repair Manual(s), bound in durable three ring binder(s).
The manuals shall include all mechanical and electrical schematics showing discrete components/block diagrams/wiring diagrams with inputs and outputs identified/system electrical interface documents and drawings for the specific model of all machine equipment/drives/controls supplied. The information contained in the manual(s) shall reflect the unit and its components in the “as built” configuration. A parts list shall be provided, as well as a pumping flow chart. The information contained in the manual(s) shall be adequate to permit trouble shooting and repair of the equipment by journeymen level personnel. The information contained in the manual(s) shall be in the English language. The information contained in the manual(s) shall be in imperial units of measure. The vendor shall provide a “no asbestos used” statement, certifying that all products/materials (i.e. gaskets, etc.) used in the components of the equipment does not contain asbestos. The contractor shall provide a list of recommended consumable spare parts and possible sources for procurement.
File details come from the government source that posted it. Updated .