Salient Characteristics Redacted.docx
DOCX document 31 KB Posted
- Attached to
- One (1) 3D Polymer Printer Federal contract opportunity
- Solicitation number
- W911QX22R0035
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Evaluation Criteria (Comparative Evaluation).docx | DOCX document | |
| Combination Synopsis-Solicitation for Commercial Purchases (Under SAT).docx | DOCX document | |
| Provisions and Clauses Full-Text Attachment (for Combo Synopsis-Solicitation).docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics
Commercial Availability Certification:
I have evaluated the commercial marketplace and determined that all of the salient characteristics documented below are available in products/services offered in the commercial marketplace.
Signature (typed name): REDACTED Technical Point of Contact (TPOC) or Contracting Officer’s Representative (COR)
The Government requires one (1) a Three Dimensional (3D) polymer printer to be used for prototype quantities of parts capable of the following charactistics:
1. Multi-material prints – capable of printing two (2) or more materials in a single print job in addition to water soluble support material.
2. Material available that is similar to Acrylonitrile Butadiene Styrene (ABS) that allow for rigid, functional parts.
3. Material available that allows for clear or translucent parts.
4. Material available that allows for flexible parts.
5. Shall be capable ofprinting flexible, rigid, and transparent materials with minimal changeover.
6. Build volume of at least 1000 cubic (cu) inch and a height of at least five (5) point five (5.5) inches.
7. Layer thickness shallshall be greater than zero point zero zero one (0.001) inches.
8. Printed parts shallshall have minimal porosity.
9. Full scale print accuracy shallshall be better than zero point five (0.5) percent (%) length.
10. Printer shall not emit hazardous fumes or dust that would require significant safety precautions.
11. Shall allow for adding material during printing for large print volumes, if needed.
12. Shall not be cloud-connected, ie: stand-alone or connected to a stand-alone personal computer (PC).
13. Software and/or printer shall read industry standard files (such as STereoLithography (STL)) natively. Any software to setup and run the printer shall be included.
14. Shall include materials needed to setup and calibrate printer.
15. Shall include installation support to complete setup and calibration on-site.
16. Shall run on single phase 120 volt (V), 60 hertz (Hz) alternating current (AC) of 20 Ampere (amp) or less.
17. Overall dimensions shall be no larger than 36 inch wide by 36 inch deep by 36 inch high for table top machines or 36 inch wide by 36 inch deep by 72 inch high for free standing machines.
Contracting Officer:
Template last updated
07/28/2016 image1.emf
File details come from the government source that posted it. Updated .