Salient Characteristics.pdf
PDF 46 KB Posted
- Attached to
- Water Jet
- Solicitation number
- FA521524Q0019
About this file
This document appears to be a set of Salient Characteristics for a Water Jet machine required under a federal contract opportunity.
The key details are:
The Water Jet machine must have a 30 HP pump with a variable frequency drive, a 120" x 60" table capable of holding 5' x 10' work pieces, and all components must fit in a 20' x 12' footprint. It requires 480V - 3 Phase power and up to 12 seats of controller software at no extra charge. The base PC must run Windows 10 or later and have a tilting head, programmable motorized Z-axis, nozzle collision sensing, digital optical probing, and water recycling capabilities. It must be capable of cutting a variety of materials.
The related federal contract opportunity is a Request for Quotes (RFQ) for the Water Jet machine, solicitation number FA5215-24-Q-0019. It is a 100% Small Business set-aside with a NAICS code of 333517. Questions are due by 28 September 2024 and quotes are due by 30 September 2024. The Government reserves the right to cancel the solicitation.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| COMBO Amended 1.pdf | ||
| COMBO (updated).pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics Water Jet
a. 30 HP Pump w/ direct drive powered with a variable frequency drive
b. 120’’ x 60’’ table minimum able to hold up to 5ft by 10ft work piece
c. All components of the Waterjet (i.e. pump, computer, table, filtration system, water chiller, and abrasive’s collection tank and bulk delivery system) must fit into a 20ft by 12ft footprint
d. 480V - 3 Phase
e. Up to 12 seats of controller software that will operate on standalone computers at no extra charge
f. Base PC computer must operate on Windows 10 software or later
g. Tilting head capable of removing taper that can maintain a linear accuracy and repeatability of ± .001’’ tolerance throughout machine’s full motion of travel
h. Programmable Motorized Z-Axis .012’’ nozzle w/ abrasive delivery system with 8’’ of Z travel and minimum cutting travel of 8ft x 4.5ft
i. Nozzle collision sensing capabilities
j. Digital optical probing system
k. Rapid water level control with a minimum of 3’’ of water travel
l. Water Recycling capabilities with water chiller
m. Garnet removal system w/ catch tank
n. 1yr supply of Garnet abrasive in 50lbs bags
o. Factory Tech to provide onsite assembly and a minimum of 2 days of Onsite Training
p. On-site rigging set up and electrical connection to facility
q. Capable of cutting Ferrous, Non-ferrous metals of any hardness as well as rubbers, plastics, phenolic and ceramics.
File details come from the government source that posted it. Updated .