Salient Characteristics.docx

10th FLOOR SALIENT CHARACTERISTICS.

The 10th floor Buffet Equipment is comprised of 5 work/serve tables, 1 Dual sink, 1 reach in cooler, 1 warm box and a conveyor toaster

1. SERVING LINE WITH HOT WELLS & SNEEZE GUARD

To measure 74" x 28" x 34" High ‐ 14-gauge stainless steel top with no backsplash. Top to include (4) insulated hot wells with manifolded drains and bendable drain line. Top is supported with stainless steel tube frame with 3/4" thick plywood panels covered with decorative laminate. Front to include (1) 74" x 1O" wide, inverted "V" stainless steel tray slide with stainless steel fold down brackets. Interior to include 18-gauge stainless steel walls and 16-gauge stainless steel flooring/shelving. Provide electrical wiring for all electrical equipment wired to a load center. Above top, provide (1) 74" long, single sides sneeze guard constructed of stainless-steel tube, tempered glass, heat lamps and LED lighting. Counter is supported on stainless steel adjustable feet with stainless steel toe kick.

2. SERVING LINE CARVING STATION

To measure 27" x 28" x 34" High ‐ 14-gauge stainless steel top with no backsplash. Top to include (1) 24" x 18" x 3/4" thick Richlite cutting board. Top is supported with stainless steel tube frame with 3/4" thick plywood panels covered with decorative laminate. Front to include (1) 72" x 10" wide, inverted "V" tray slide with stainless steel fold down brackets. Interior to include 18-gauge stainless steel walls and 16-gauge stainless steel flooring/shelving. Provide electrical receptacle wired to a j‐box. Counter is supported on stainless steel adjustable feet with stainless steel toe kick

3. SERVING LINE WITH COLD WELL AND SNEEZE GUARD

To measure 72" x 28" x 34" High ‐14-gauge stainless steel top with no backsplash. Top to include (1) AFCP4 drop in cold well, self-contained unit. Top is supported with stainless steel tube frame with 3/4" thick plywood panels covered with decorative laminate. Front to include (1) 72" x 10" wide, inverted "V" stainless steel tray slide with stainless steel fold down brackets. Interior to include 18-gauge stainless steel walls and 16-gauge stainless steel flooring/shelving. Provide electrical wiring for all electrical equipment wired to a j‐box. Above top, provide (1) 72" long, single‐sided sneeze guard constructed of stainless-steel tube, tempered glass and LED lighting

4. BEVERAGE COUNTER

To measure 70" x 38" x 34" High ‐ 14-gauge stainless steel top with 4" backsplash. Top to include grommet holes and (1) 42" long drip trough with grate and drain. Top is supported with stainless steel tube frame with 3/4" thick plywood panels and hinged doors covered with decorative laminate. Interior to include 18-gauge stainless steel walls and 16-gauge stainless steel flooring/shelving. Counter is supported on stainless steel adjustable feet with stainless steel toe kick.

5. WORKTABLE, STAINLESS STEEL TOP

Worktable, 48"W x 30"D, 16-gauge 304 stainless steel top, 18-gauge stainless steel adjustable undershelf, stainless steel legs & adjustable bullet feet, NSF

6. TWO COMPARTMENT SINK

Fabricated Sink, 2‐compartment, 18" right drainboard, bowl size 16" x 20" x 14" deep, 14-gauge 304 stainless steel, tile edge splash, rolled edge, 8" OC faucet holes, stainless steel legs with adjustable side cross‐bracing, 1" adjustable stainless steel bullet feet, overall, 26" F/B x 52‐1/2" L/R, NSF 1 ea 12" spout 2 ea K‐40 Lever Drain, all stainless steel, 2"

7. REACH IN DUAL TEMP CABINET

Refrigerator/Freezer Dual Temp Cabinet, reach‐in, two‐ section, self‐contained refrigeration, stainless steel exterior and interior, standard depth cabinet, (2) wide full‐height locking doors, (6) adjustable wire shelves, interior LED lighting, microprocessor controls, 1/3 HP (refrigerator) & 1/2 HP (freezer), UL, NSF 1 ea 115v/60/1‐ph, 16 amps, with cord & NEMA 5‐20P, standard 1 ea Left door hinged left/right hinged right, standard

WARRANTY

1 ea 3-year service/labor, 5-year compressor warranty, standard

8. LOW TEMPERATURE HOLDING CABINET.

Double compartment, on/off simple controller with adjustable thermostats, indicator light, (2) sets of chrome plated universal side rails, (4) sets of pan slides, (16) 20" x 12" x 2‐1/2" full size pan capacity, heavy stainless-steel exterior, 5" casters; 2 rigid, 2 swivel with brakes, UL, UL EPH Classified, CE, IPX4, TUV NORD, EAC 1 ea 120v/50/60/1‐ph, 1.9 kW, 16.0 amps, NEMA 5‐20P, standard 2 ea Solid door, hinged on right, standard

9. COMMERCIAL COVEYOR TOASTER

Conveyor Toaster, single, electric, 15 pieces per min. capacity, programmable controls with USB port on front, Color sensing system, removable crumb tray & collector ramp, UL, UL EPH Classified.

1 ea One-year on‐site parts & labor warranty, plus one additional year parts only warranty 1 ea 208v/60/1‐ph, 2700 watts, 13.0 amps, 6' cord with NEMA 6‐20P

10. INSTALLATION OF COUNTERS

Company will supply certified installation technicians to unload truck, set SIS manufactured items in place, level the equipment, install counter tops and do seaming and install signage. Final electrical and plumbing hook ups to be by others. Price will be a non‐union installation price. If allotted timeframe of installation quoted by SIS does not coincide to allocated installation window timeframe, two additional certified installers can be sent to the job site at the additional cost of travel, expenses, and time, to be added to this quotation. If a phased installation is required, additional charges may be added to cover travel expenses. Pricing will be based on ground floor installation with reasonable access to equipment location.

Authorized installer will remove existing equipment to facility dock for disposal by facility. Installer will uncrate, set in place, and hook new equipment up to facility supplied container. Installer will assist in counter installation and make all final connection. All generated debris will be placed in a facility supplied container. All work to be done Mon‐Fri 8‐4pm.

OTHER.

Additional details of Installation will be in accordance with Performance Work Statement (PWS)