Salient Characterisitics 25QA102_Redacted.pdf
PDF 345 KB Posted
- Attached to
- Sources Sought for Quantity (qty) one (1) Unit 30x3 Multi-color Multi-material Polymer Co-extrusion Line
- Solicitation number
- W911QX-25-Q-A102
About this file
This is a Salient Characteristics document for a commercial equipment procurement. The government requires one 30x3 Multi-Color Multi-material Polymer Extrusion Line with specific technical specifications including triple 30-millimeter screw extruders capable of simultaneous co-extrusion of various polymers in a coaxial arrangement, including acrylonitrile butadiene styrene, polylactic acid, polyethylene terephthalate glycol, acrylonitrile styrene acrylate, polystyrene, polyethylene, nylon, and thermoplastic urethane.
The system must include dies for co-extrusion or tri-extrusion, water and air-cooling stages for production rates of 1 ft/s or greater, dual optical diameter sensors with closed loop control for 1.75mm +/- 0.02mm diameters, line storage with three-axis programmable winder, extra extrusion screws for fiber reinforced resins, hot air resin dryer and humidifying dryer, and line tension controller. The cost must include shipping, three years of maintenance parts, and three years of warranty and technical support. Delivery is required within six to eight months after contract award, with shipping and installation at Aberdeen Proving Ground, MD 21005. The document is signed by Contracting Officer Morgan J. Evans and dated 8/7/2025, with the Commercial Availability Certification pending signature from the Technical Point of Contact.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sources Sought 25QA102_Redacted.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Template last updated 07/28/2016
Salient Characteristics
Commercial Availability Certification:
I have evaluated the commercial marketplace and determined that all of the salient characteristics documented below are available in products/services offered in the commercial marketplace.
Signature (typed name): ___________TBD__________________
Technical Point of Contact (TPOC) or Contracting Officer’s Representative (COR)
The Contractor shall provide Quantity (qty) One (1) Unit 30x3 Multi-Color Multi-material Polymer Extrusion Line with the following minimum requirements:
1) Triple 30-millimeter (mm) screw extruders for simultaneous co-extrusion of polymers in a coaxial arrangement. Must be able to co-extrude multiple polymers into a single extrudate, including the following polymers: acrylonitrile butadiene styrene; polylactic acid; polyethylene terephthalate glycol; acrylonitrile styrene acrylate; polystyrene, polyethylene, nylon, and thermoplastic urethane
2) Dies for co-extrusion (extruding two polymers side-by-side) or tri-extrusion (extruding three polymers side-by-side).
3) Water- and air-cooling stages sufficient for production rates of 1 foot per second (ft/s) or greater.
4) Dual optical diameter sensor with closed loop control suitable for achieving diameters of 1.75 mm +/- 0.02 mm.
5) Line storage and three (3) axis programmable winder for spooling filament.
6) Extra extrusion screws specialized for fiber reinforced resins.
7) Hot air resin dryer and humidifying dryer for managing polymer pellet water content.
8) Line tension controller.
9) Cost includes shipping, spare parts (3 years of maintenance parts), and 3 years of warranty and technical support.
File details come from the government source that posted it. Updated .