Salient Charactaristics.pdf
PDF 141 KB Posted
- Attached to
- MIC Industries Building in a Box Federal contract opportunity
- Solicitation number
- FA489726QA012
About this file
This is a specification sheet for a Building In A Box (BIB) procurement by the 819th RED HORSE Squadron at Mountain Home Air Force Base, Idaho. The 819th RHS seeks to purchase BIB manufactured parts for use with its Ultimate Building Machine (UBM) to complete construction on project QYZH 24-0011, a TTP Construction Storage Facility (Building B74999).
The BIB must comply with specified minimum physical characteristics including UBM steel coil stock (0.063 gauge, maximum 36" width, cream tan color), a ¼" by 3" by 20' base angle, MIC 240 entry door kit (36" x 80", right hand reverse swing), MIC 240 louver kit (36" x 36", 3120 CFM, power-operated 110V/60Hz), MIC 240 ventilator kit (32" x 32", 5000 CFM, 110V/60Hz), a 16' by 16' power-operated insulated overhead door kit with 10' tube extension, #12-14 tek screws with rubber washers, MIC 240 end wall channel, neoprene closed-cell sponge materials in two sizes with PSA backing, mastic tape, exterior white silicone tube, UBM steel building blanket and batting insulation, washers, weld-on pins, and protective speed caps. All components must carry a one-year warranty. Delivery must be made to the 366th Civil Engineer Squadron Material Control Facility at Mountain Home AFB, ID 83648 no later than 90 days after contract award.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| COMBO.pdf | ||
| Provisions and Clauses.pdf | ||
| SSJ.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIFICATION SHEET
Mountain Home AFB, ID
BUILDING IN A BOX – 819th RED HORSE Squadron 08 January 2026
1. GENERAL: The 819th RED HORSE Squadron (819 RHS) is requesting to purchase Building
In A Box (BIB) manufactured parts intended to be utilized with the 819 RHS’s Ultimate Building Machine (UBM) in an effort to complete construction on QYZH 24-0011 TTP CSTR- CNS Storage Fclty, B74999.
2. BIB MINIMUM SPECIFICATIONS: The BIB must (at a minimum) comply with the following salient characteristics:
2.1. Physical Characteristics
2.1.1. UBM Steel (0.063 Coil Stock, maximum 36” width). Color: Cream Tan
2.1.2. Base Angle: ¼” by 3” by 20’
2.1.3. MIC 240 Entry Door Kit Right Hand Reverse (Swing Out) (36” x 80”)
2.1.4. MIC 240 Louver Kit (36” x 36”) – 3120 Cubic Feet per Minute (CFM) – (Power
Open/Close – 110V/60Hz)
2.1.5. MIC 240 Ventilator Kit (32” x 32”) – 5000 CFM – 110V/60Hz
2.1.6. Overhead Door Kit (16’W x 16’H) – Power Operated, 110V/60Hz - Insulated
2.1.7. Overhead Door 10’ Tube Extension Kit
2.1.8. #12-14 Tek Screw 1-1/4” with rubber washers
2.1.9. MIC 240 End Wall Channel 8’
2.1.10 Neoprene 1-1/2” x 8” x 72” Closed Cell Sponge with PSA on one side only
2.1.11 Neoprene ½” x 2” x 72” Closed Cell Sponge with PSA on one side only
2.1.12 Mastic Tape #1104 1/8” x 1” x 40’
2.1.13 Exterior Silicone Tube – White
2.1.14 UBM Steel Building Blanket Insulation
2.1.15 Washer WA 200
2.1.16 Weld-On Pin 12 Gauge x 6-1/2”
2.1.17 Protective Speed Cap 12 Gauge – White
2.1.18 UBM Steel Building Batting Insulation Finishing Tape
2.2. Warranty
2.2.1. All components: 1 year
3. SPECIFICS:
3.1. Delivery
3.1.1. Contractor shall deliver to the 366th Civil Engineer Squadoron Material Control Facility – ADDRESS., Mountain Home AFB ID, 83648
3.1.2. Delivery will be no later than 90 days after date of contract (ADC).
File details come from the government source that posted it. Updated .