S01 Rigid Inflatable Boat_Engine_Trailer Technical Specifications Attachment.pdf
PDF 63 KB Posted
- Attached to
- RIGID INFLATABLE BOAT, ENGINE AND TRAILER Federal contract opportunity
- Solicitation number
- 12FPC425Q0037
About this file
This document contains technical specifications for a 13-foot Rigid Inflatable Boat (RIB) for the Natural Resource Conservation Service (NRCS). The specifications detail a marine vessel designed for transport, patrol, and utility operations, with precise requirements for hull and tube construction, performance, and accessories. Key technical specifications include a boat length of 12.8 to 13.2 feet, Hypalon tube material with minimum three independent air chambers, marine-grade fiberglass hull, and capacity for four adults with a minimum payload of 900 lbs.
The RIB requires a 20-30 HP electric start engine, center console steering, and must operate in both saltwater and freshwater environments. Additional mandatory features include stainless steel D-rings, heavy-duty grab handles, a bow storage locker, and a galvanized 1000 lb bunk trailer. Compliance with ISO 6185-3 and ABYC standards is required, and the deliverables include the boat, owner's manual, warranty documentation, air pump, repair kit, oars/paddles, and certification of conformity. The boat is intended for Environmental Quality Incentive Program Oyster Reef Initiative and subaqueous soil survey operations in coastal restoration work.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| S01 12FPC425Q0037 Questions and Answers.pdf | ||
| S01 RFQ 12FPC425Q0037 Combined Synopsis Solicitaiton_7-1-25.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
TECHNICAL SPECIFICATIONS
Rigid Inflatable Boat Engine and Trailer
The following technical specifications are required to meet the NRCS mission:
Technical Specification – Rigid Inflatable Boat (RIB), 13-Foot Class
1. Scope:
This specification covers the requirements for a rigid inflatable boat (RIB) with an overall length of approximately 13 feet. The vessel shall be suitable for use in marine environments and capable of supporting transport, patrol, or utility operations with high durability and stability.
2. General Requirements:
The boat shall consist of a rigid hull and inflatable collar (tube) system. All materials and components shall be new, of current manufacture, and free from defects that may affect performance, safety, or durability.
3. Dimensional Requirements:
- Length Overall (LOA): 12.8 to 13.2 feet
- Beam (Overall Width): Minimum 5.5 feet, maximum 6.5 feet
- Tube Diameter: Not less than 16 inches
- Internal Beam: Minimum 3.5 feet
- Hull Draft (Unloaded): Not to exceed 1.2 feet
4. Tube Construction:
- Material: Hypalon (chlorosulfonated polyethylene/CSM) or equivalent
- Configuration: Minimum of three (3) independent air chambers
- Seams: Hand-glued or thermowelded
- Valves: Marine-grade inflation/deflation valves with one-way check valves
- Pressure Relief: Integrated pressure relief valves to prevent over-inflation
5. Hull Construction:
- Type: Deep-V or moderate-V rigid hull
- Material: Marine-grade fiberglass
- Transom: Reinforced to accommodate outboard motor mounting
- Deck: Non-skid surface with self-bailing or manual drain plug
6. Performance and Capacity:
- Maximum Engine Rating: Minimum 20 HP; not to exceed 30 HP, electric start
- 12v battery for engine
- Center consol steering and engine controls (not stern drive tiller setup)
- Payload Capacity: Minimum 900 lbs
- Personnel Capacity: four (4) adults
- Operating Environment: Capable of operation in saltwater and freshwater environments, including exposure to UV, heat, and petroleum products
7. Fittings and Accessories:
- D-rings: Stainless steel bow and stern lifting/towing points
- Handles: Multiple heavy-duty grab handles along the tube perimeter
- Bow Locker: Integrated or modular storage locker for gear or anchor
- Seating: Minimum one (1) removable or fixed bench seat
- Mooring: Bow eye and side-mounted mooring cleats or D-rings
8. Transport and Storage:
- Galvanized 1000 lb bunk trailer
- Capable of deflation and compact storage
- Weight (without motor): Not to exceed 350 lbs
- Lifting Points: Reinforced for crane or davit hoisting
9. Compliance:
- The vessel shall conform to applicable sections of ISO 6185-3, ABYC standards, or equivalent national/international marine safety standards
- Manufacturer shall provide documentation confirming compliance and operational capability
10. Deliverables:
- One (1) rigid inflatable boat meeting the above specifications
- Owner’s manual and warranty documentation
- Air pump (manual or electric), repair kit, and oars or paddles
- Certification of conformity and proof of testing (factory or third-party)
File details come from the government source that posted it. Updated .