RQS - State Police Hi-Vis Jacket Spec 2024.pdf

Specifications

General description High Vis Outer Jacket:

Custom reversible jacket with insulation, Safety yellow with 2” reflective bands outside / Solid Black inside, and other custom features per MSP specifications. The jacket must be made of Waterproof-breathable fabric, hi-vis fabric, with durable, black waterproof-breathable liner fabric, reversible and fully seam-sealed on both sides. Must Include:

side zips, full-length reversible front zip, numerous pockets and specialized functional features, including but not limited to the below:

Specific Configuration:

• Color – Safety Yellow on the primary outside (Except the collar needs to be black on both sides to ensure hi-vis material is not shown when the jacket is worn on the black side facing out), solid black on the inside

• Fabrics must be integrated waterproof breathable laminated membrane, at waterproof ratings of 20,000mm / 20k breathable, with extra durable water repellant on top.

• 3M™ Reflective meeting photometric performance level 1 or 2 minimum, overlay accents on yellow side as specified, 100% seam sealed in production. One, 2” reflective band encircles below waist, one band across chest, two 2’ bands encircle each arm, bands over each shoulder through upper body.

• Double-stitched seams, with inside (reverse-side) clean finish

• ALL seams sealed in manufacturing

• ¾ length heavy-duty jacket

• Badge Tab left front chest on each side. Front main zip (right-handed), 2-way zip with plackets for wind and water resistance

• Front upper vertical chest pockets, yellow side (reverse coil)

• Two low, angled front reverse-coil zip pockets, both sides (main and reverse)

• Adjustable sleeve cuffs, ½ elastic with hook and loop tabs

• Black rubber pull tab on zipper sliders

• Microphone loops on shoulders

• 2-way side zips with adjustable tab / snap closure at bottom. Runs under arm for adjustable venting

• Removable hood, with chin guard storable in back rear lower pocket (yellow side)

• Snap closure on main front zipper placket, and bottom of hood where it meets collar

• Thin snap tabs in black side at top of collar, each side of sleeve cuffs to fasten optional liner

• Sizes available in XS-4XL

• Labels sewn in items must include; Care, Size, Country of Origin and Fiber content.

Special Maine State Police Embellishment

• Reflective embroidered applique, 3” block lettering on back (yellow side only) to read “STATE POLICE”. Lettering to be sewn to the jacket along the outside border of each character using black thread, sewn and seam sealed in production, and is not sewn through reversible side.

• Patches and/or embroidery sewn in production. Embroidery of badge applied and taped in production.

• Shoulder patches (provided by customer) sewn on and seam sealed in production

General description Black Liner:

All Black, softshell jacket fabric with stretch poly softshell face fabric laminated with waterproof-breathable membrane, warm waterproof-breathable and wind-resistant flexible jacket that will be worn as layering jacket or as a stand-alone jacket.

Specific Configuration:

• Jacket must be able to be worn for layering and fastened inside outer jacket included in this bid or as a stand-alone professional identification piece.

• Fabric – 3-layer, Stretch Black nylon face fabric with microfleece backing and waterproof- breathable membrane, bonded lamination

• Jacket must be wind resistant and waterproof breathable at ratings of 5,000mm / 3000mp

• No lining for exposed fleece inside.

• Front main zip with zipper plackets (flap) closing over zipper to protect for wind and water resistance

• One front chest pocket, two front hand-warmer pockets

• Pockets lined with tricot for comfort and warmth

• Mic loops optional at no charge

• Stretch Lycra band at sleeve cuffs

• Soft brush tricot inside collar

• Two (2) inside pockets for convenience

• High quality pocket reverse-coil zippers with all-black zipper pulls for pockets.

• Zipper garage at top collar to protect chin.

• Key clip inside left lower hand-warmer pocket

• All Zippers incorporated will be waterproof.

• Anchor points at sleeve cuffs and collar optional for attachment to wear inside as layering under other jackets.

• Labels sewn in items must include; Care, Size, Country of Origin and Fiber content.

Special Maine State Police Embellishment

• Patches and/or embroidery sewn in production – Patches, Provided by department will be put on at no extra cost. Embroidery of front badge required on each jacket.

Inner liner shall have state provided shoulder patches sewn on both left and rights shoulders and the Maine State Police badge embroidered over left chest. (See jpeg image below)