RIR_QAP_W05238_8-52B-420.pdf

PDF 4 MB Posted

Attached to
Cable Drive Unit (CDU) Parts Federal contract opportunity
Solicitation number
N6660426Q0202
Issued by
Department of the Navy Naval Sea Systems Command

About this file

This is a Receipt Inspection Report (TAHEF-Form-No. 008 Rev C) for quality assurance at the TAHE Facility (NUWC, Building 6) in Newport, Rhode Island. The form documents the receipt and inspection of part number 8-52B-420, designated as an OK-276 CDU Puller Support Post #2, with drawing number 8-52B-420_32386_FN_G_D0 (Revision G). The order is for new manufacture under work order W05238, with a sales order for FUTURE BUILDS and a quantity of 25 units ordered for inventory.

The report specifies mandatory quality documentation and compliance requirements including: Certificate of Compliance confirming manufacturing per applicable instructions and specifications; Mercury Free Statement certifying no mercury-containing compounds were intentionally added (ROHS required for electronic components); Certificate of Analysis of raw material meeting specifications for Beryllium Copper Alloy per IAW Drawing Note 2; Domestically Sourced Material documentation per DFARS Part 225 (Foreign Acquisition); Product Identification on external surfaces with military specifications provided upon request; Process Certification confirming manufacturing per special processes identified; and Special Packaging Requirements to prevent damage during handling and transportation. The form references Government Furnished Information (GFI) documentation including ASME B46.1-2019, MIL-STD-130N with Change 1, and specific drawing notes for stamping, plating, and heat treatment requirements. The report sections for total accepted, total rejected, inspector identification, and date remain blank, indicating this is a template for future inspections.

View the file

Other files for this federal contract opportunity

Other files attached to Cable Drive Unit (CDU) Parts, newest first.
File Type Posted
RIR_QAP_W05238_8-52-142M-1.pdf PDF
SAE AMS5659_REV-T_2021-10-01.pdf PDF
II.E. RFQ N6660426Q0202.pdf PDF
RIR_QAP_W05238_8-52B-50M.pdf PDF
RIR_QAP_W05238_8-52B-49M.pdf PDF
RIR_QAP_W05238_8-52-159M-1.pdf PDF
SAE AMS-C-26074D_2013-06-01.pdf PDF
RIR_QAP_W05238_8-52B-48M.pdf PDF
VIR_W05238.pdf PDF
MIL-STD-130N_with_Change-1_2012-11-16.pdf PDF
PR 1301329311 CDRL A001-A005 (signed).pdf PDF
ASME B46.1-2019_2020-06-30.pdf PDF
ASTM A582-A582M-22_2022-11-01.pdf PDF
Show all 13

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

TAHEF-Form-No. 008 Rev C

8/29/2025

TAHE FACILITY NUWC, BLDG. 6

NEWPORT, RI 02841

TAHE FACILITY QUALITY PROVISIONS

RECEIPT INSPECTION REPORT

1. PART NUMBER 2. PART NOMENCLATURE

3. DRAWING NUMBER REV

4. WORK ORDER: 5. S/N:

6. STATEMENT OF WORK: 7. SALES ORDER: 8. UNIT THE ORDER IS FOR: 9. ORDER IS FOR INVENTORY:

10. PURCHASE/OUTSIDE SERVICE 11. PURCHASER/OSS COORDINATOR SIGNATURE

12. CHARACTERISTIC MEASURED / VERIFIED DISPOSITION-REMARKS

THE FOLLOWING QUALITY DOCUMENTATION / INFORMATION /

INSTRUCTIONS MUST BE PROVIDED / ADHERED TO:

13. GFI: DOCUMENTATION PROVIDED

VENDOR DO NOT WRITE BELOW. FOR TAHEF QA ONLY.

14. SOURCE: 15. PURCHASE ORDER: 16. PURCHASE REQUEST: 17. QTY RECEIVED:

18. TOTAL ACCEPTED 19. TOTAL REJECTED 20. INSPECTOR 21. DATE

TAHEF-Form-No. 008 Rev C

8/29/2025

22. Enclosure

RIR_test_iii.pdf
Enclosure Page.pdf
Untitled
PART NUMBER: 8-52B-420
DRAWING NUMBER: 8-52B-420_32386_FN_G_D0
REV: G
PART NOMENCLATURE: OK-276 CDU Puller Support Post #2.
WORK ORDER: W05238
SN: N/A
STATEMENT OF WORK: N/A
SALES ORDER: FUTURE BUILDS
UNIT THE ORDER IS FOR: OK-276 CDU
DISPOSITIONREMARKSTHE FOLLOWING QUALITY DOCUMENTATION INFORMATION INSTRUCTIONS MUST BE PROVIDED ADHERED TO: QTY: 25
Text1: Certificate of Compliance: that items were manufactured in accordance with all applicable instructions and specifications.
Req1: Required.

(A001)

Text2: Mercury Free Statement: A signed document from the supplying vendor certifying that mercury and mercury containing compounds were not intentionally added to nor came in contact with hardware or supplies furnished under this work order. ROHS is not an acceptable substitute.
Text3: Certificate of Analysis of raw material stating that it meets the specifications identified.
Req3: Required: Beryllium Copper Alloy 25 IAW Drawing Note 2. (A003)
Text4: Domestically Sourced Material: all raw material must be sourced domestically or from a qualified country per DFARS Part 225: Foreign Acquisition.
Req4: Required.

(A004)

Text5: Product Identification: identification must appear on external surfaces of items or packages. Parts must be returned with associated tags. (Military specifications will be provided upon request) Parts must be returned with associated tags.
Req5: Required: See Enclosure Note 1.
Text6: Process Certification: that items were manufactured in accordance with special processes identified.
Req6: Required: See Enclosure Note 2.

(A005)

Text7: Special Packaging Requirements: protect parts to prevent damage during handling and transportation.
Req7: Required.
Text8:
Req8:
Text9:
Req9:
Req2: Required - ROHS is only acceptable for the procument of electronic components.
Text14: ASME B46.1-2019_2020-06-30
Text16: MIL-STD-130N_with_Change-1_2012-11-16
Text17: VIR_W05238
Text18: W05238
Text20:
Text21:
Text22:
Text23:
Text24:
Text25:
Text13: 8-52B-48M_32386_FN_G
Dropdown1: [Purchasing - New Manufacture]
Text19: RIR_QAP_W05238_8-52B-420
Text26: Enclosure Note 1: Stamp part with 32386/8-52B-420 IAW Drawing Note 6 per MIL-STD-130.

Enclosure Note 2: Plate and heat treat IAW Drawing Note 8. Ensure threaded holes, Ø.3125/.3120 (Datum B) and adjacent face are masked off before plating. See Drawing Zone B3 and View C.

CDRLs - COC (A001), Mercury Free Certification (A002), Certificate of Analysis (A003), Domestically Sourced (A004), and Process Certification (A005).

Check Box1: Yes

File details come from the government source that posted it. Updated .