Additional Information about the Well.pdf
PDF 123 KB Posted
- Attached to
- REPAIR WELL AT FCI PHOENIX
- Solicitation number
- RFQP06081100027
About this file
Additional Information
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Amendment 0001.pdf | ||
| Wage Determination AZ100010.pdf | ||
| cover letter.pdf | ||
| RFQP06081100027.pdf | ||
| Scope of Work Well 2.pdf | ||
| Photos of Jobsite.pdf | ||
| Well 2 Diagrams.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Additional Information about the Well
The depth of the well is approximately 1200 feet. The well was dug in 1983 and has been in use since then as one of two primary sources of water for FCI Phoenix.
The pump is located at a depth of approximately 470 feet.
The fence around the well may be removed to gain access to the well to pull the pump. The fence must be standing when the job is complete. The panels are not set in concrete.
Water flow: The water flows from the well to the potable water treatment plant and then to the 500,000-gallon above-ground tank. The dimensions of the tank are 52’W x 32’ H. Static pressure is 50 PSI.
The specifications of the existing motor:
Manufacturer: GE Model No.: 5K6255XL529A Serial No.: BXJ229298
60 HP
460/230 Volt 3 Phase
The existing motor was rebuilt in 2003. A new bowl assembly and sounding tube were installed at that time. The well was brushed, bailed, and cleaned utilizing a dry ice treatment.
File details come from the government source that posted it. Updated .