Questions and Answers for Robins AFB.docx

Questions & Answers – CIP Multicam Waterjet 16 March 2021

1. What intensifier power and pressure is required? Please provide a specification for BOTH:

a. Power (in horsepower) 60 HP

b. Pressure (in thousands of PSI) 90

2. Is one set of spare consumables required? We recommend one “full spares kit” that includes all the necessary consumable replacement parts for the first preventive maintenance visit, which normally occurs 500-1,000 hours of operation after the machine has been installed.

Yes, SLVI PRO 60 Full Spares

3. Is a set of maintenance tools required? We recommend one “full tools kit” that includes all the small hand tools needed to perform a preventive maintenance service, which normally occurs every 500-1,000 hours of operation.

Yes, SLVI PRO 60 Full Tools

4. Is a chiller required? A closed-loop chiller reduces the amount of water consumed during cutting by 75%-80%. We highly recommend this if the machine will be operated more than a couple hours per day or if water consumption is an important environmental or cost issue at this location.

Yes, WJ Closed Loop Chiller 36KBTU 460VAC

5. Is a laser pointer required? A laser pointer with a cross-hair enables the operator to set the cutting home position more quickly and accurately.

Yes, Laser Pointer Cross-Hair 12mm Red 10mW (for easy home setting)

6. Is CAD/CAM software required? What software features are required? Is random/true shape nesting required?

Yes, Enroute 6 Fab CAD/CAM Software with True Shape Nesting

7. Will the building have a water source and drain close to the machine’s location? Yes

8. Is the building’s water supply filtered? No