RFQ SP330021Q0009.pdf

SP3300-21-Q-0009

NOTICE TO OFFERORS

1. Issuing Office:

DLA Distribution Acquisition Operations (J7)

430 Mifflin Avenue, Suite 3102A

New Cumberland, PA 17070-5008

2. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in the Federal Acquisition Regulations (FAR) Subpart 12.6 – Streamlined Procedures for Evaluation and

Solicitation for Commercial Items in conjunction with FAR Subpart 13.5 Simplified Procedures for Certain

Commercial Items. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This is a Request for Quote (RFQ) and the RFQ number is SP3300-

21-Q-0009.

3. This notice incorporates provisions and clauses in effect through Federal Acquisition Circular (FAC) 2021-

02 effective 23 October 2020 and Defense Federal Acquisition Regulation Supplement (DFARS) DFARS

Publication Notice (DPN) 20201123 effective 23 November 2020 and Defense Logistics Acquisition

Directive (DLAD) Current to Revision 5 and PROCLTR 2021-01 effective 15 October 2020. The complete text of any of the clauses and provisions are:

FAR: https://ecfr.federalregister.gov/current/title-48/chapter-1

DFARS: https://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html

DLAD: http://www.dla.mil/HQ/Acquisition/Offers/DLAD.aspx

4. This Request for Quotation (RFQ) is being issued to establish a Firm-Fixed Price (FFP) contract for the supply and installation of five (5) Vertical Lift Modules (VLM) Storage Systems (here to after called

VLM's) for DLA Distribution Jacksonville, FL (DDJF) located at Naval Air Station Jacksonville, Florida

(NASJAX). The Government intends to award one contract as a result of this RFQ and will be issued on a

Standard Form (SF) 1449. This acquisition is not a Defense Priorities and Allocations System (DPAS) rated procurement.

5. This RFQ is being solicited as unrestricted, full and open competition. The North American Industry

Classification System (NAICS) code for this project is 333922 and the size standard is 500 employees. The

Product or Service Code (PSC) for this acquisition is 3910.

6. DELIVERY: ALL UNIT PRICES SHALL BE QUOTED AS FOB DESTINATION PRICING.

Delivery/Install: The items shall be shipped as follows:

DLA Distribution Jacksonville, FL (DDJF)

Building 109

Yorktown Avenue, NASJAX

Jacksonville, Florida 32212

7. INSURANCE: Reference FAR Clause 52.228-5 Insurance-Work on a Government Installation located in this solicitation. The minimum amount/kind of insurance is shown below:

Workers’ Compensation and Employer’s Liability - $100,000 (except in states with exclusive or monopolistic funds that do not permit workers’ compensation to be written by private carriers.) General

Liability- $500,000 per occurrence

Automobile Liability – Property damage $20,000 per occurrence, Bodily injury $200,000 per person and

$500,000 per occurrence

When requested by the Contracting Officer, the Contractor shall provide a copy of all subcontractors’ proofs of required insurance no later than five (5) days before each subcontractor commences work on the

Government installation.

8. ILLEGAL ITEMS NOT AUTHORIZED ON FEDERAL INSTALLATION

Illegal drugs, guns or other contraband are not authorized on this Federal installation. It is the contractor’s responsibility to ensure that its employees working on-site at this installation are U. S. citizens or legal aliens with no outstanding warrants. This installation is manned by a DoD Police Force who possesses apprehension authority, which includes holding suspects for local authorities. The local authorities can issue a citation that charges the individual with a specific offense and requires the individual to appear before a Federal Magistrate. This agency processes illegal aliens in accordance with INS instructions.

9. ORGANIZATIONAL CONFLICT OF INTEREST

The contractor shall be ineligible from participation as a contractor, subcontractor, or consultant in any procurement arising or resulting from any of the services provided to DLA on this contract. This restriction includes providing services to any potential bidders on such procurements. The contractor shall not incorporate its product or services in any Performance Work Statement or specification unless directed to do so in writing by the Contracting Officer.

If the contractor, in the performance of this contract, obtains access to information such as plans, policies, reports, studies, financial data, internal data, or any other non-public information or information by the

Privacy Act, the contractor agrees not to release such information without prior written approval from the

Contracting Officer. The use of such information for personal gain is prohibited.

In addition, the contractor agrees that to the extent it receives or is given access to proprietary data, or other confidential or privileged technical, business, or financial information under this contract, it shall treat such information in accordance with any restrictions imposed on such information.

10. SYSTEM FOR AWARD MANAGEMENT (SAM): A prospective awardee shall be registered in the

System for Award management (SAM) database by the quotation submission date, during performance and through final payment of any contract resulting from this solicitation. Offerors may obtain information on registration and annual confirmation requirements via the SAM website at http://www.sam.gov. Contractor shall type company name, address, and CAGE code exactly as it appears in the DoD System for Award

Management (SAM) Database.

Company Name: _____________________________________________

Company Address: _____________________________________________

Telephone: _____________________________________________

CAGE Code: _____________________________________________

Point of Contact: _____________________________________________

EMAIL: _____________________________________________

Manufacturer: _____________________________________________

11. INVOICING AND PAYMENT: Invoicing and Payment will be made via Wide Area WorkFlow. See

DFARS 252.232-7006.

12. COMMERCIAL INTERIM PAYMENT:

a. Partial Payments IAW FAR 32.202-2 are authorized under this requirement as specified below:

Payment 1: Actual cost of materials delivered and accepted by the Contracting Officer Representative

(COR) to be validated with supplier invoices.

Payment 2: Installation of material and verification by the COR that the system is functional. The total value of the partial payments shall not exceed 70 percent of the total dollar of the purchase order.

b. All material and work covered by the partial payments shall, at the time of payment, become the sole property of the Government, but this shall not be construed as: (1) Relieving the contractor from the sole responsibility for all material and work upon which payments have been made for the restoration of any damaged work; or (2) Waiving the right to the Government to require the fulfillment of all the terms of the contract.

c. Final payment of the purchase order shall be made upon final acceptance of all deliverables by the

Government and completion of final operational test.

d. The final payment shall be the total price less Payments 1 and 2.

13. MARK CONTRACT NUMBER ON ALL CORRESPONDENCE: Contractor must mark the contract or purchase order number on all paperwork and shipments. The order number must appear on the exterior of the shipment. Failure to follow these instructions will hold up payment to you and could result in the return of merchandise at your expense.

14. SITE VISIT: Pre-award site visit will be conducted Date – December 17, 2020 Time - 10:00 AM Eastern

Standard Time, Location – Bldg. 109 DLA Distribution Jacksonville, FL. Attendees must be on-site at the

Pass and ID office at 9:15 AM Eastern Standard Time to be escorted to BLDG 109. Please provide an email to james.heslop@dla.mil with point of contact information no later than December 10, 2020 if you are interested in attending the site visit. Upon arrival, contractor shall possess a valid driver’s license and proof of insurance. Contractor will be met at the pass office and signed in for a one-day pass.

15. QUESTIONS: Questions regarding this solicitation shall be submitted by electronic mail to the

Acquisition Specialist, James Heslop, via email at james.heslop@dla.mil, Subject: SP330021Q0009 RFQ

Question. Question(s) must be received by 1:00 PM EST on 23 December 2020.

SCHEDULE OF SUPPLIES

SEE ATTACHMENT 3 – SCHEDULE OF SUPPLIES

The following clauses are incorporated by reference:

ADDENDA TO 52.212-4 (Contract Terms and Conditions-Commercial Items) OCT 2018

FAR 52.202-1 Definitions

FAR 52.203-3 Gratuities

FAR 52.203-12 Limitation on Payments to Influence Certain Federal Transactions

FAR 52.203-17 Contractor Employee Whistleblower Rights and Requirement to Inform

Employees of Whistleblower Rights

FAR 52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber Content Paper

FAR 52.204-9 Personal Identity Verification of Contractor Personnel

FAR 52.204-13 System for Award Management Maintenance

FAR 52.204-18 Commercial and Government Entity Code Maintenance

FAR 52.204-19 Incorporation by Reference of Representations and Certifications

FAR 52.204-25 Prohibition on Contracting for Certain Telecommunications and Video

Surveillance Services or Equipment

FAR 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations

FAR 52.211-17 Delivery of Excess Quantities

FAR 52.217-7 Option for Increased Quantity – Separately Priced Line Item

FAR 52.223-5 Pollution prevention and Right-to-Know Information

FAR 52.223-6 Drug-Free Workplace

FAR 52.223-10 Waste Reduction Program

FAR 52.228-5 Insurance – Work on a Government Installation

FAR 52.232-1 Payments

FAR 52.232-8 Discounts for Prompt Payment

FAR 52.232-11 Extras

FAR 52.232-17 Interest mailto:james.heslop@dla.mil

FAR 52.232-23 Assignment of Claims

FAR 52.232-39 Unenforceability of Unauthorized Obligations

FAR 52.232-40 Providing Accelerated Payments to Small Business Subcontractors

FAR 52.233-1 Disputes

FAR 52.233-4 Applicable Law for Breach of Contract Claim

FAR 52.242-13 Bankruptcy

FAR 52.246-2 Inspection of Supplies – Fixed Price

FAR 52.246-16 Responsibility for Supplies

FAR 52.247-34 F.o.b. Destination

FAR 52.253-1 Computer Generated Forms

DFARS 252.201-7000 Contracting Officer’s Representative

DFARS 252.203-7000 Requirements Relating to Compensation of Former DoD Officials

DFARS 252.203-7002 Requirement to Inform Employees of Whistleblower Rights

DFARS 252.203-7005 Representation Relating to Compensation of Former DoD Officials

DFARS 252.204-7000 Disclosure of Information

DFARS 252.204-7003 Control of Government Personnel Work Product

DFARS 252.204-7004 Level I Antiterrorism Awareness Training for Contractors

DFARS 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting

DFARS 252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support

DFARS 252.205-7000 Provision of Information to Cooperative Agreement Holders

DFARS 252.209-7004 Subcontracting With Firms That Are Owned or Controlled By The government of A Country That Is a State Sponsor of Terrorism

DFARS 252.211-7003 Item Unique Identification and Valuation

DFARS 252.223-7006 Prohibition on Storage, Treatment and Disposal of Toxic or Hazardous

Materials

DFARS 252.223-7008 Prohibition of Hexavalent Chromium

DFARS 252.225-7002 Qualifying Country Sources as Subcontractors

DFARS 252.225-7012 Preference for Certain Domestic Commodities

DFARS 252.225-7021 Trade Agreements (Deviation 2020-O0019)

DFARS 252.225-7048 Export Controlled Items

DFARS 252.226-7001 Utilization of Indian Organizations, Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns

DFARS 252.227-7015 Technical Data -- Commercial Items

DFARS 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports

DFARS 252.232-7010 Levies on Contract Payments

DFARS 252.243-7001 Pricing of Contract Modifications

DFARS 252.243-7002 Requests for Equitable Adjustment

DFARS 252.244-7000 Subcontracts for Commercial Items

DFARS 252.247-7023 Transportation of Supplies by Sea

DLAD 52.204-9000 Contractor Personnel Security Requirements

The following clauses are incorporated by full text:

FAR 52.212-5 – Contract Terms and Conditions Required to Implement Statutes or Executive Orders-

Commercial Items (Oct 2020) (incorporated by reference and in paragraph (b) the following clauses apply)

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

52.203-6 Restrictions on Subcontractor Sales to the Government (June 2020), with Alternate I (Oct 1995) (41

U.S.C. 4704 and 10 U.S.C. 2402)

52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub. L. 109-

282) (31 U.S.C. 6101 note).

52.209-6 Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Jun 2020) (31 U.S.C. 6101 note)

52.209-9 Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41 U.S.C.

2313)

52.219-4 Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Mar 2020) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a)

52.219-8 Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3))

52.219-16 Liquidated Damages-Subcontracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i))

52.219-28 Post Award Small Business Program Rerepresentation (May 2020) (15 U.S.C. 632(a)(2))

52.222-3 Convict Labor (Jun 2003) (E.O.11755)

52.222-19 Child Labor-Cooperation with Authorities and Remedies (Deviation 2020-O0019) (Jul 2020)

(E.O.13126)

52.222-21 Prohibition of Segregated Facilities (Apr 2015)

52.222-26 Equal Opportunity (Sep 2016) (E.O.11246)

52.222-35 Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212)

52.222-36 Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C. 793)

52.222-37 Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212)

52.222-40 Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496)

52.222-50 52.222-50, Combating Trafficking in Persons (Oct 2020) (22 U.S.C. chapter 78 and E.O. 13627).

52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving (Jun 2020) (E.O. 13513)

52.225-13 Restrictions on Certain Foreign Purchases (Jun 2008) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury)

(End of clause)

FAR 52.252-2 -- CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

FAR: https://ecfr.federalregister.gov/current/title-48/chapter-1

DFARS: https://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html

(End of Clause)

DFARS 252.211-7003 Item Unique Identification and Valuation (MAR 2016)

(a) Definitions. As used in this clause—

“Automatic identification device” means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

“Concatenated unique item identifier” means—

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

“Data matrix” means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200

(ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical

Commission (IEC) 16022.

“Data qualifier” means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

“DoD recognized unique identification equivalent” means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html.

“DoD item unique identification” means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier;

the original part, lot, or batch number; and the serial number.

“Enterprise” means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

“Enterprise identifier” means a code that is uniquely assigned to an enterprise by an issuing agency.

“Government’s unit acquisition cost” means—

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor’s estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor’s estimated fully burdened unit cost to the Government at the time of delivery.

“Issuing agency” means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

“Issuing agency code” means a code that designates the registration (or controlling) authority for the enterprise identifier.

“Item” means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

“Lot or batch number” means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

“Machine-readable” means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

“Original part number” means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

“Parent item” means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

“Serial number within the enterprise identifier” means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

“Serial number within the part, lot, or batch number” means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

“Serialization within the enterprise identifier” means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

“Serialization within the part, lot, or batch number” means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

“Type designation” means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

“Unique item identifier” means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

“Unique item identifier type” means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government’s unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or Exhibit Line Item Number Item Description

(ii) Items for which the Government’s unit acquisition cost is less than $5,000 that are identified in the

Schedule or the following table:

Contract Line, Subline, or Exhibit Line Item Number Item Description

(If items are identified in the Schedule, insert “See Schedule in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment

Number ____.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment

Number ____.

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology –

International symbology specification – Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that—

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology – EAN/UCC Application

Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application

Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology – EAN/UCC Application

Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application

Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard

15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International

Standard 15434, Information Technology – Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall—

(A) Determine whether to—

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification

Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-

130, latest version.

(ii) The issuing agency code—

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government’s unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the

Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods—

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ___, Unique Item

Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items.

DFARS 252.222-7999 Combating Race and Sex Stereotyping (DEVIATION 2021-O0001)

COMBATING RACE AND SEX STEREOTYPING

(DEVIATION 2021-O0001) (NOV 2020)

“Race or sex scapegoating” means assigning fault, blame, or bias to a race or sex, or to members of a race or sex because of their race or sex.

“Race or sex stereotyping” means ascribing character traits, values, moral and ethical codes, privileges, status, or beliefs to a race or sex, or to an individual because of his or her race or sex.

(b) Exemptions. The exemptions that apply to Executive Order (E.O.) 11246 (see FAR 22.807) also apply to E.O.

13950 and the requirements of this clause.

(c) Compliance with E.O. 13950, Combating Race and Sex Stereotyping. Unless exempted under paragraph (b) of this clause, the Contractor shall not use any workplace training that inculcates in its employees any form of race or sex stereotyping or any form of race or sex scapegoating, including the concepts that—

(1) One race or sex is inherently superior to another race or sex;

(2) An individual, by virtue of his or her race or sex, is inherently racist, sexist, or oppressive, whether consciously or unconsciously;

(3) An individual should be discriminated against or receive adverse treatment solely or partly because of his or her race or sex;

(4) Members of one race or sex cannot and should not attempt to treat others without respect to race or sex;

(5) An individual’s moral character is necessarily determined by his or her race or sex;

(6) An individual, by virtue of his or her race or sex, bears responsibility for actions committed in the past by other members of the same race or sex;

(7) Any individual should feel discomfort, guilt, anguish, or any other form of psychological distress on account of his or her race or sex; or

(8) Meritocracy or traits such as a hard work ethic are racist or sexist, or were created by a particular race to oppress another race.

(d) Notice. The Contractor shall send, to each labor union or representative of workers with which it has a collective bargaining agreement or other contract or understanding, the notice provided below advising the labor union or workers’ representative of the Contractor’s commitments under this clause, and post copies of the notice in conspicuous places available to employees and applicants for employment.

NOTICE

E.O. 13950, Combating Race and Sex Stereotyping

Employers Holding Federal Contracts or Subcontracts

Contractors shall not use any workplace training that inculcates in its employees any form of race or sex stereotyping or any form of race or sex scapegoating, including the following concepts that—

(1) One race or sex is inherently superior to another race or sex;

(2) An individual, by virtue of his or her race or sex, is inherently racist, sexist, or oppressive, whether consciously or unconsciously;

(3) An individual should be discriminated against or receive adverse treatment solely or partly because of his or her race or sex;

(4) Members of one race or sex cannot and should not attempt to treat others without respect to race or sex;

(5) An individual’s moral character is necessarily determined by his or her race or sex;

(6) An individual, by virtue of his or her race or sex, bears responsibility for actions committed in the past by other members of the same race or sex;

(7) Any individual should feel discomfort, guilt, anguish, or any other form of psychological distress on account of his or her race or sex; or

(8) Meritocracy or traits such as a hard work ethic are racist or sexist, or were created by a particular race to oppress another race.

For use in this notice—

“Race or sex scapegoating” means assigning fault, blame, or bias to a race or sex, or to members of a race or sex because of their race or sex; and

“Race or sex stereotyping” means ascribing character traits, values, moral and ethical codes, privileges, status, or beliefs to a race or sex, or to an individual because of his or her race or sex.

Any person who believes a contractor has violated its nondiscrimination or affirmative action obligations under this notice should immediately contact the Office of Federal Contract Compliance Programs (OFCCP) Complaint Hotline to

Combat Race and Sex Stereotyping at 202-343-2008 or via email at OFCCPComplaintHotline@dol.gov.

(End of notice)

(e) Noncompliance. In the event it is determined that the Contractor is not in compliance with this clause or any rule, regulation, or order of the Secretary of Labor, this contract may be canceled, terminated, or suspended in whole or in part, and the Contractor may be declared ineligible for further Government contracts, under the procedures authorized in E.O.

11246, as amended. In addition, sanctions may be imposed and remedies invoked against the Contractor as provided in

E.O. 11246, as amended; in the rules, regulations, and orders of the Secretary of Labor; or as otherwise provided by law.

(f) Subcontracts. (1) The Contractor shall include the substance of this clause, including this paragraph (f), in all subcontracts that exceed $10,000 and are not exempted by the rules, regulations, or orders of the Secretary of Labor issued under E.O. 11246, as amended, so that these terms and conditions will be binding upon each subcontractor.

(2) The Contractor shall take such action with respect to any subcontract as the Director of OFCCP may direct as a means of enforcing these terms and conditions, including sanctions for noncompliance, provided, that if the Contractor becomes involved in, or is threatened with, litigation with a subcontractor as a result of such direction, the Contractor may request the United States to enter into the litigation to protect the interests of the United States.

DFARS 252.232-7006 -- Wide Area WorkFlow Payment Instructions. (DEC 2018)

“Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area

WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232-7003, Electronic Submission of

Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232

7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

mailto:OFCCPComplaintHotline@dol.gov

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web- Based Training

Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data

Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items—

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting

Officer.

____________2 in 1 Invoice________________________________________________

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the

Contracting Officer.

____________________N/A________________________

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial item financing, submit a commercial item financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC SL4701

Issue By DoDAAC SP3300

Admin DoDAAC** SP3300

Inspect By DoDAAC N/A

Ship To Code N/A

Ship From Code N/A

Mark For Code N/A

Service Approver (DoDAAC) N/A

Service Acceptor (DoDAAC) SB3300

Accept at Other DoDAAC N/A

LPO DoDAAC N/A

DCAA Auditor DoDAAC N/A

Other DoDAAC(s) N/A

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition

Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving Report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s

WAWF point of contact.

_N/A_____________________________

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

THE FOLLOWING LINK IS FOR GOVERNMENT USE ONLY (PAYMENT INSTRUCTIONS):

(https://www.acq.osd.mil/dpap/dars/pgi/pgi_htm/current/PGI204_71.htm#payment_instructions)

L06 Agency Protests (DEC 2016)

Interested parties may file an agency level protest with the contracting officer or may request an independent review by the chief of the contracting office (CCO). Independent review by the CCO is an alternative to consideration by the contracting officer and is not available as an appellate review of a contracting officer decision on a protest previously filed with the contracting officer. Absent a clear indication of the intent to file an agency level protest with the CCO for independent review, protests will be presumed to be protests to the contracting officer.

ATTACHMENTS:

Attachment 1 – Statement of Work (SOW)

Attachment 2 – Drawing

Attachment 3 – Schedule of Supplies

Exhibit 1 – Contract Data Requirements List (CDRL)

SOLICITATION PROVISIONS:

The following provisions are incorporated by reference:

FAR 52.203-11 Certification and Disclosure Regarding Payments to Influence Certain Federal

Transactions

FAR 52.203-18 Prohibition on contracting with entities that require certain internal confidentiality agreements or statements representation

FAR 52.204-7 System for Award Management

FAR 52.204-16 Commercial and Government Entity Code Reporting

FAR 52.204-17 Ownership or Control of Offeror

FAR 52.204-20 Predecessor of Offeror

FAR 52.204-26 Covered Telecommunications Equipment or Services—Representation

FAR 52.209-2 Prohibition on contracting with inverted domestic corporations—representation https://www.acq.osd.mil/dpap/dars/pgi/pgi_htm/current/PGI204_71.htm#payment_instructions

FAR 52.222-22 Previous contracts and compliance reports

FAR 52.222-25 Affirmative action compliance

FAR 52.223-22 Public Disclosure of Greenhouse Gas Emissions and Reduction Goals-Representation

FAR 52.225-18 Place of Manufacture

FAR 52.225-25 Prohibition on contracting with entities engaging in certain activities or transactions relating to Iran—representation and certifications

FAR 52.229-11 Tax on Certain Foreign Procurements – Notice and Representation (JUN 2020)

DFARS 252.203-

Representation relating to compensation of former DOD officials

DFARS 252.204-

Alternate A, Annual Representations and Certifications

DFARS 252.204-

Compliance with safeguarding covered defense information controls

DFARS 252.213-

Notice to Prospective Suppliers on Use of Supplier Performance Risk System in Past

Performance Evaluations

DFARS 252.225-

Buy American – Free Trade Agreements – Balance of Payments Program Certificate –

Basic (Deviation 2020-O0019)

DFARS 252.247-

Representation of Extent of Transportation by Sea

DFARS 252.225-

Representation Regarding persons that have Business Operations with the Maduro Regime

The following provisions are incorporated by full text:

FAR 52.204-24 – Representation Regarding Certain Telecommunications and Video Surveillance Services or

Equipment (AUG 2020)

The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it “does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument” in the provision at 52.204-26, Covered Telecommunications Equipment or Services—Representation, or in paragraph (v) of the provision at 52.212-3, Offeror Representations and Certifications-Commercial Items.

(a) Definitions. As used in this provision—

Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Prohibition.

(1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L.

115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to—

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019

(Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to—

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management

(SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for “covered telecommunications equipment or services”.

(d) Representation. The Offeror represents that—

(1) It □ will, □ will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds

“will” in paragraph (d)(1) of this section; and

(2) After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that—

It □ does, □ does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds “does” in paragraph (d)(2) of this section.

(e) Disclosures.

(1) Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded “will” in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment—

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(ii) For covered services—

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the Product Service Code (PSC) of the service being provided;

and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(2) Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded

“does” in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment—

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(ii) For covered services—

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the PSC of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(End of provision)

FAR 52.207-4 Economic Purchase Quantity—Supplies (AUG 1987)

(a) Offerors are invited to state an opinion on whether the quantity(ies) of supplies on which bids, proposals or quotes are requested in this solicitation is (are) economically advantageous to the Government.

(b) Each offeror who believes that acquisitions in different quantities would be more advantageous is…