RFQ_S-27400-00017196_HVAC_Testing_and_Balancing_Report_Services_at_ODVA_Salem_Bldg.pdf
PDF 1 MB Posted
- Solicitation number
- S-27400-00017196
- Issued by
- Marion County, Oregon
About this file
This Request for Quotation (RFQ) is issued by the Oregon Department of Veterans' Affairs (ODVA) for HVAC testing and balancing report services at its Salem Office Building located at 700 Summer Street NE, Salem, Oregon 97301. The contractor shall provide comprehensive diagnostic services including verification and assessment of existing system conditions, documentation of as-built conditions, airflow measurements, damper operation verification, and identification of deficiencies. Specific deliverables include marked-up field drawings reflecting VAV box locations and configurations, duct routing, diffuser and thermostat locations, and damper conditions; assessment of duct construction, leakage, insulation, and economizer operations; and measurements under maximum cooling, minimum airflow/heating, and economizer testing conditions, including Pitot tube traverses, static pressure data, and fan operating information. The contractor must begin work thirty (30) days after contract execution. Quotes are due by 2:00 PM Pacific Standard Time on July 23, 2026. A voluntary site walk may be requested and scheduled before 5:00 PM on July 15, 2026. Award will be made based on best value as determined by ODVA.
All pricing must be held firm for ninety (90) days and submitted using the provided Quote Submission Form in Exhibit A, which includes line items for labor and materials/supplies. The project is classified as an Intermediate Procurement in accordance with Oregon Administrative Rules and is subject to Public Improvement Project prevailing wage requirements under BOLI standards. The contractor must obtain all required permits, perform work during ODVA's regular business hours (Monday–Friday, 8:00 AM–5:00 PM) unless otherwise approved, and coordinate with the Agency Contact, Troy Croff (971-388-8214; Troy.croff@odva.oregon.gov). Required insurance includes Workers' Compensation, Commercial General Liability ($1,000,000 per occurrence/$2,000,000 aggregate), Automobile Liability ($1,000,000 combined single limit), and $5,000,000 Excess/Umbrella coverage. The single point of contact for administrative matters is Tina Reniere (503-551-5302; Tina.H.Reniere@odva.oregon.gov). Quotes must be submitted electronically through OregonBuys Solicitation #S-27400-00017196.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Exhibit_A_RFQ_S-27400-00017196_HVAC_Testing_and_Balancing_Report_Services_at_ODVA_Salem_Bldg.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
RFQ # S-27400-00017196 HVAC Testing & Balancing Report Services at ODVA Salem Building
REQUEST FOR QUOTATION
RFQ # S-27400-00017196
***THIS IS NOT AN ORDER******
HVAC Testing & Balancing Report Services at ODVA Salem Building
Quotes Due (Closing): July 23, 2026 at 2:00PM (PST)
RFQ Submission Requirements: Provide Quote Submission form no later than 2:00PM (PST) on July 23, 2026 via Electronic Submission through OregonBuys Solicitation #: S-27400-00017196.
Summary Overview: The Oregon Department of Veterans’ Affairs (“ODVA”) is requesting a quote for HVAC testing and balancing report services at our Salem Office Building located at: 700 Summer St NE, Salem, OR 97301.
The purpose of this effort is diagnostic and intended to document existing operation conditions, verifying system configuration, and identify deficiencies requiring correction prior to VAV replacement and controls upgrade.
Project Specifications: Contractor shall provide the following services:
• Verifying and assessing existing system conditions;
• Documenting as-built conditions;
• Taking airflow measurements to understand current system operations;
• Verifying damper operations; and
• Note any deficiencies.
See Exhibit B – Statement of Work of HVAC Testing & Balancing Report Services at ODVA Salem Building for more information.
Requested Availability Date of Product or Service: Contractor shall begin the work thirty (30) days after the Contract has been executed.
Insurance Requirements: Selected Contractor must provide insurance in amounts and types listed in Exhibit C.
Award Selection: Award will be made based on best value as determined by ODVA.
Type of Solicitation: This Intermediate Procurement is in accordance with OAR 125-247-0270 and 279B.070.
“OR EQUAL”: Any brand name listed in the specifications as “or equal” or “or equivalent” shall establish the minimum requirements for quality, utility, durability, function, purpose, etc. Other product brands may be offered that are equal to or better than the product brand name. Vendor may show cost differences, alternates and options in the space provided in the quote. This clause is not meant to be restrictive, but to set the minimum standard.
AGENCY SHALL DETERMINE, IN ITS SOLE DISCRETION, WHETHER A PRODUCT OFFERED IS “EQUAL.” When the designation is “or equal” or “equivalent” Agency shall make its decision after Quote Closing.
ODVA reserves the right to make reject any Quote not in compliance with the RFQ, attachments, and addenda, or it is in the best interest of ODVA.
Single Point of Contact: Tina Reniere (503) 551-5302 Phone Tina.H.Reniere@odva.oregon.gov Email https://oregonbuys.gov/bso/ mailto:Tina.H.Reniere@odva.oregon.gov
Exhibit A Quote Submission Form
Company Name:
Contact Name:
Address:
City, State, and Zip Code:
Phone Number:
Email:
Labor Item Description Time Rate Total
1 Hrs. $ $ 2 Hrs. $ $
Materials / Supplies Item Description Quantity Amount Total
1 each $ $ 2 each $ $ 3 each $ $ 4 each $ $
Vendor Signature: By signature below the undersigned certifies that they are authorized to act on the behalf of the quoter and will comply with all aspects of the quote herein.
Signature:
Name / Title:
Date:
All Pricing Must Be Held Firm For 90 Days
Total $
Exhibit B Statement of Work
HVAC Testing & Balancing Report Services at ODVA Salem Building
The following outlines the key elements of the statement of work related to this project. Any questions or clarifications needed should be directed to the agency’s contact person, who is the single point of contact, as listed below in this document.
Project Name: HVAC Testing & Balancing Report Services at ODVA Salem Building
Agency Contact: Troy Croff Facility and Construction Project Manager Troy.croff@odva.oregon.gov 971-388-8214
Project Location: Oregon Department of Veterans’ Affairs (ODVA) 700 Summer St NE Salem, OR 97301
Project Site Walk: If requesting a voluntary site walk of the Project area, please contact the Agency
Contact to schedule the site walk before 5:00pm on July 15, 2026.
Note: Parking may be available in “vendor parking” adjacent to the SE corner of the ODVA Building near the loading dock (vehicles must have commercial markings in order to utilize the free “vendor parking” at our building. Otherwise, metered parking is generally available in the parking lot and the surrounding area).
Project Timeline: RFQ to be posted to OregonBuys on or before June 30, 2026
Voluntary site walk to be requested and scheduled before July 15, 2026 Bid Submission deadline: 2:00pm on July 23, 2026
Project Description:
The Oregon Department of Veterans’ Affairs (“ODVA”) is requesting a quote for HVAC testing and balancing report services at our Salem Office Building located at: 700 Summer St NE, Salem, OR 97301. The building is served by dual duct VAV air handling units located in the penthouse (mechanical room), each equipped with chilled water and heating water coils. The Auditorium on the 1st floor is served by a dedicated Air Handling Unit. The building utilizes a ceiling and shaft return air plenum system.
The central cooling system including coils, pumps, cooling tower, and chiller was replaced in 2025 and has been balanced. The building zones are currently served by pneumatically controlled dual-duct VAV boxes. The majority of the 2nd floor was remolded and completed in 2026 and was balanced as part of that project. The TAB report from that work identified malfunctioning VAV boxes. Therefore, the entire VAV box assemblies will be replaced with new units with DDC controls. There may have been additional remodels on the other floors over the years;
however, HVAC as-built drawings for those areas are not available.
While the available HVAC plans may not reflect the current field conditions, updated architectural backgrounds are available. To assist the TAB contractor, MFIA will overlay the most current available HVAC information onto the updated architectural backgrounds to provide a plan set for field verification and as-built documentation.
The purpose of this effort is diagnostic and intended to document existing operation conditions, verifying system configuration, and identify deficiencies requiring correction prior to VAV replacement and controls upgrade.
mailto:Troy.croff@odva.oregon.gov
Service Requirements:
Contractor shall provide the following services:
• Verifying and assessing existing system conditions;
• Documenting as-built conditions;
• Taking airflow measurements to understand current system operations;
• Verifying damper operations; and
• Note any deficiencies.
Other Requirements:
1. As-Built:
• Verify and markup existing conditions related to the drawings provided of the following:
o Location of existing VAV boxes;
o VAV box sizes and configuration (hot/cold deck connections);
o Duct routing from VAV boxes to supply diffusers (to confirm zoning);
o Supply diffusers and return grille locations;
o Thermostat locations; and o Presence and condition of manual volume dampers (note: any discrepancies between field conditions and available drawings).
2. Assessment:
• Evaluate and document the following conditions of:
o Supply, return, and relief duct construction;
o Duct leakage locations;
o Missing or damage insulations;
o Conditions and operations of economizer dampers (outside air, return air, and relief); and
Damper blade type and sealing condition, and Actuator linkage condition and operability.
o Missing or damage insulation.
3. Measurements (No System Adjustments, Airside Only):
• Testing the systems under the following conditions:
o Maximum Cooling Condition (Simulated if Necessary):
All zones calling for cooling;
Cold deck fully open;
Minimum outside air position (economizer closed); and Fans operating at current maximum speed.
o Minimum Airflow/Heating Condition:
VAVs at minimum position;
Heating deck active; and Fans operating at minimum stable speed.
o Economic Testing:
Minimum outside air position; and 100% outside air position (simulate economizer mode if required).
• Airflow Measurements:
o Measure total supply, return, and exhaust airflow;
o Measure hot deck and cold deck airflow separately;
o Perform Pitot tube traverses of supply mains, major branch ducts, and vertical shafts (locations shown on 1/M5.1 in the as-built);
o Measure airflow at representative supply diffusers as necessary to confirm zoning and distribution patterns. Full diffuser-by-diffuser balancing is not required; and o Measure airflow at VAV inlets where accessible.
• Exhaust System Verification:
o Identify and document all exhaust fans serving the building;
o Measure airflow of major exhaust systems (restrooms, kitchens, large general exhaust systems, etc.);
o Record fan RPM and nameplate data; and o Verify operational status of each fan.
• Static Pressure & Equipment Data:
o Measure and record:
Fan inlet and discharge static pressure;
Static pressure in hot and cold decks;
Static in supply mains by floor (Same as Traverse Locations);
Pressure drop across filers and coils;
Building static pressure;
Measure ceiling return plenum static pressure relative to occupied space on representative floors; and Fan RPM, motor nameplate data, and sheave sizes.
• Economizer & Outside Air:
o Measure outside air, return air, and relief airflows at minimum and 100% outside air positions;
o Measure mixed air, return air, and outside air temperatures to evaluate damper leakage; and o Document economizer damper operation.
• Report: Provide a TAB report including the following:
o Measured airflows;
o Static pressures;
o Fan operating data;
o Economizer performance;
o Marked-up field drawings; and o Narrative summary describing overall system condition and limitations impacting redesign.
Responsibilities and Deliverables:
Contractor is responsible for the following:
• Obtain all required permits prior to beginning work;
• Perform all services during ODVA’s regular business hours Monday – Friday 8:00am – 5:00pm, unless otherwise approved by the Agency Contact or Delegate;
• Minimize impact on employees in the building. The entire building is an occupied space. Coordinate with the Agency Contact (or delegate) if portions of the is work must be done outside of business hours in order to minimize negative impact on occupants;
• All travel to and from the work site, all planned maintenance materials and labor, and any trips to procure materials or supplies are included in the pricing of the Contract;
• Always protect all finishes of the building from damage;
• Provide warranty documentation to the Agency Contact upon completion of the Project;
• Keep work areas safe, clean, and free of hazards and debris at all times during and at the end each workday;
• Ensure the building is secure at the end of each workday;
• All Contractors, and anyone associated with the Project, must sign in and out at the Facilities Office (Suite
50) each day they are on the premises;
• Must keep all pathways to and from the work areas, including any parking and/or staging areas, clean and free of hazards and debris at all times (there is vendor parking adjacent to the SE corner of the ODVA Building that can be used for parking while work is in progress, as long as vehicles are clearly marked as commercial vehicles (signage, lettering, etc.). Coordinate with Agency Contact for parking permits and related guidance;
• Contractors are to use the loading dock for loading and unloading equipment, tools, supplies, materials, etc.
Main entrances are for foot traffic only. Coordinate with Agency Contact for any special requests or exceptions; and
• Properly dispose of all maintenance, construction, and cleaning-related debris; disposal is the responsibility of the Contractor.
Other Notes:
• Contractor must communicate regularly with the Agency Contact regarding Project progress, issues and potential resolutions, schedule adjustments, and other relevant updates;
• If any specified materials are unavailable or would cause the Project delays, Contractor may propose suitable alternatives for the Agency Contact’s review and approval;
• Contractor must comply with all BOLI standards and regulations as laid out in the BOLI Handbook at the following link: Microsoft Word - 2026 PWR Laws Handbook 6.5.26 edition. Quotes must be submitted with BOLI rates in the pricing due to this Project being part of a Public Improvement Project;
• Agency Contact (or their delegate) is the sole point of contact for questions that arise during the Project;
and
• The most current available HVAC information will be overlayed onto the updated architectural backgrounds and will be available during the quote walk upon request.
https://www.oregon.gov/boli/employers/Documents/2026%20PWR%20Laws%20Handbook%206.5.26%20edition.pdf
Exhibit C Insurance Requirements
Contractor shall obtain at Contractor’s expense the insurance specified in this Exhibit C prior to performing under this Contract. Contractor shall maintain such insurance in full force and at its own expense throughout the duration of this Contract, as required by any extended reporting period or continuous claims made coverage requirements, and all warranty periods that apply. Contractor shall obtain the following insurance from insurance companies or entities that are authorized to transact the business of insurance and issue coverage in the State of Oregon and that are acceptable to Agency. All coverage shall be primary and non-contributory with any other insurance and self-insurance, with the exception of Professional Liability and Workers’ Compensation. Contractor shall pay for all deductibles, self-insured retention, and self-insurance, if any.
If Contractor maintains broader coverage and/or higher limits than the minimums shown in this Exhibit C, Agency requires and shall be entitled to the broader coverage and/or higher limits maintained by Contractor.
WORKERS’ COMPENSATION & EMPLOYERS’ LIABILITY:
All employers, including Contractor, that employ subject workers, as defined in ORS 656.027, shall comply with ORS 656.017, and provide Workers’ Compensation Insurance coverage for those workers, unless they meet the requirement for an exemption under ORS 656.126(2). Contractor shall require and ensure that each of its subcontractors complies with these requirements. If Contractor is a subject employer, as defined in ORS 656.023, Contractor shall also obtain Employers' Liability Insurance coverage with limits not less than $500,000 each accident.
If Contractor is an employer subject to any other state’s Workers’ Compensation law, Contactor shall provide Workers’ Compensation Insurance coverage for its employees as required by applicable Workers’ Compensation laws including Employers’ Liability Insurance coverage with limits not less than $500,000 and shall require and ensure that each of its out-of-state subcontractors complies with these requirements.
As applicable, Contractor shall obtain coverage to discharge all responsibilities and liabilities that arise out of or relate to the Jones Act with limits of no less than $5,000,000 and/or the Longshoremen’s and Harbor Workers’ Compensation Act.
COMMERCIAL GENERAL LIABILITY:
Required Contractor shall provide Commercial General Liability Insurance covering bodily injury and property damage in a form and with coverage that are satisfactory to the State of Oregon. This insurance must include personal and advertising injury liability, products and completed operations, contractual liability coverage for the indemnity provided under this Contract, and have no limitation of coverage to designated premises, project, or operation.
Coverage must be written on an occurrence basis in an amount of not less than $1,000,000 per occurrence and not less than $2,000,000 annual aggregate limit.
AUTOMOBILE LIABILITY INSURANCE:
Required Not required Contractor shall provide Automobile Liability Insurance covering Contractor’s business use including coverage for all owned, non-owned, or hired vehicles with a combined single limit of not less than $1,000,000 for bodily injury and property damage. This coverage may be written in combination with the Commercial General Liability Insurance (with separate limits for Commercial General Liability and Automobile Liability). Use of personal automobile liability insurance coverage may be acceptable if evidence that the policy includes a business use endorsement is provided.
PROFESSIONAL LIABILITY:
Required Not required
NETWORK SECURITY AND PRIVACY LIABILITY:
Required Not required
POLLUTION LIABILITY:
Required Not required
EXCESS/UMBRELLA INSURANCE:
Excess/Umbrella insurance coverage in the sum of $5,000,000 must be provided and will apply over all liability policies, without exception, including but not limited to Commercial General Liability, Automobile Liability, and Employers' Liability coverage. The amounts of insurance for the insurance required under this Contract, including this Excess/Umbrella insurance requirement, may be met by the Contractor obtaining coverage for the limits specified under each type of required insurance or by any combination of underlying, Excess and Umbrella limits so long as the total amount of insurance is not less than the limits specified for each type of required insurance added to the limit for this Excess/Umbrella insurance requirement.
If Excess/Umbrella insurance is used to meet the minimum insurance requirement, the Certificate of Insurance must include a list of all policies that fall under the Excess/Umbrella insurance.
ADDITIONAL INSURED:
All liability insurance, except for Workers’ Compensation, Professional Liability, Directors and Officers Liability and Network Security and Privacy Liability (if applicable), required under this Contract must include an Additional Insured endorsement specifying the State of Oregon, its officers, employees, and agents as Additional Insureds, but only with respect to Contractor’s goods to be delivered and Services to be performed under this Contract. Coverage shall be primary and non-contributory with any other insurance and self-insurance.
Regarding Additional Insured status under the General Liability policy, Agency requires Additional Insured status with respect to liability arising out of ongoing operations and completed operations, but only with respect to Contractor's goods to be delivered and Services to be performed under this Contract. The Additional Insured endorsement with respect to liability arising out of Contractor’s ongoing operations must be on, or at least as broad as, ISO Form CG 20 10 and the Additional Insured endorsement with respect to completed operations must be on, or at least as broad as, ISO form CG 20 37.
WAIVER OF SUBROGATION:
Contractor shall waive rights of subrogation which Contractor or any insurer of Contractor may acquire against the Agency or State of Oregon by virtue of the payment of any loss. Contractor shall obtain any endorsement that may be necessary to affect this waiver of subrogation, but this provision applies regardless of whether or not Agency has received a Waiver of Subrogation endorsement from the Contractor or the Contractor’s insurer(s).
CONTINUOUS CLAIMS MADE COVERAGE:
If any of the required liability insurance other than Physical Abuse and Molestation Insurance is on a claims made basis and does not include an extended reporting period of at least 24 months, then Contractor shall maintain continuous claims made liability coverage, provided the effective date of the continuous claims made coverage is on or before the effective date of this Contract, for a minimum of 24 months following the later of:
(i) Contractor ’s completion and Agency’s acceptance of all goods and Services required under this Contract, or
(ii) Agency’s or Contractor’s termination of this Contract, or
(iii) The expiration of all warranty periods provided under this Contract.
If PHYSICAL ABUSE AND MOLESTATION INSURANCE is required, then refer to that coverage requirement for separate Continuous Claims Made Coverage that applies.
CERTIFICATE(S) AND PROOF OF INSURANCE:
Contractor shall provide to Agency Certificate(s) of Insurance for all required insurance before delivering any goods and performing any Services required under this Contract. The Certificate(s) of Insurance must list the State of Oregon, its officers, employees, and agents as a Certificate holder and as an endorsed Additional Insured. The Certificate(s) of Insurance must also include all required endorsements or copies of the applicable policy language effecting coverage required by this Contract.
If excess/umbrella Insurance is used to meet the minimum insurance requirement, the Certificate(s) of Insurance must include a list of all policies that fall under the Excess/Umbrella Insurance. As proof of insurance, Agency has the right to request copies of insurance policies and endorsements relating to the insurance requirements under this Exhibit C.
NOTICE OF CHANGE OR CANCELLATION:
Contractor or its insurer shall provide at least 30 calendar days’ written notice to Agency before cancellation of, material change to, potential exhaustion of aggregate limits of, or non-renewal of the required insurance coverage(s).
INSURANCE REQUIREMENT REVIEW:
Contractor agrees to periodic review of insurance requirements by Agency under this Contract and to provide updated requirements as mutually agreed upon by Contractor and Agency.
STATE ACCEPTANCE:
All insurance providers are subject to Agency acceptance. If requested by Agency, Contractor shall provide complete copies of insurance policies, endorsements, self-insurance documents and related insurance documents to Agency’s representatives responsible for verification of the insurance coverages required under this Exhibit C.
Exhibit D Plans and Drawings
Plans and Drawings Cover Page
A
B
B
C
C
D
D
E
E
F
F
G
G
H
H
I
I
J
J
2 2
3 3
5 5
6 6
4 4
1 1
EXST OFFICE
EXST OFFICE
EXST OFFICE
EXST OFFICE
CLIENT MTG RM
STORAGE
EXST WAITING ROOM
UTILITY
EXST TLT
107E
OPEN OFFICE
EXST OFFICE
MECH.
ELEV
BREAK ROOM
EXST OFFICE
EXST OFFICE
STO.
ELEC.
STAIR NW
WOMEN
MEN
LOBBY
VESTIBULE
STORAGE
ELEC.
WEST ENTRANCE
EXIST. LOADING
32E
SOUTH ENTRANCE
OPEN OFFICE
HALL
ELEV
OPEN OFFICE
OPEN OFFICE
AUDITORIUM
EXST OFFICE
OFFICE
EXST
CONFERENCE
CORRIDOR
FACILITIES
OPEN OFFICE
CONFERENCE
SE STAIR
NOT FOR
CONSTRUCTION
R E V
I S I O
N S
DATE:
FORWARD ARCHITECTURE, LLC
+1.503.851.7401
PO BOX 44, SALEM, OR 97308
WWW.FWSARCH.COM
DDC CONTROLS FOR
ODVA OFFICE BUILDING
700 SUMMER ST NE, SALEM, OR
97301
M-201
MECHANICAL
LEVEL 1 FLOOR
PLAN - EXISTING
D R
A F T
APR 21, 2026
OREGON DEPT. OF VETERANS'
AFFAIRS
N O
D
E S C
R I P
T I O
N D
A T E
AutoCAD SHX Text
MD-102
AutoCAD SHX Text
MD-101
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text
225CFM (TYP.2)
AutoCAD SHX Text 8x10
AutoCAD SHX Text 12x10
AutoCAD SHX Text
180CFM (TYP.OF 8)
AutoCAD SHX Text 12x6 50H-1 TYP.2
AutoCAD SHX Text 8"
AutoCAD SHX Text 7"
AutoCAD SHX Text
135CFM (TYP.4)
AutoCAD SHX Text 8x10
AutoCAD SHX Text 8x10
AutoCAD SHX Text 8"
AutoCAD SHX Text 9"
AutoCAD SHX Text 10x10
AutoCAD SHX Text 10x10
AutoCAD SHX Text
225CFM (TYP.2)
AutoCAD SHX Text
200CFM (TYP.6)
AutoCAD SHX Text 12x10
AutoCAD SHX Text 14x14
AutoCAD SHX Text 9"
AutoCAD SHX Text 7"
AutoCAD SHX Text 12"
AutoCAD SHX Text 10"
AutoCAD SHX Text 6x10
AutoCAD SHX Text 8x10
AutoCAD SHX Text 14"
AutoCAD SHX Text 14"
AutoCAD SHX Text 12"
AutoCAD SHX Text 9"
AutoCAD SHX Text 18"
AutoCAD SHX Text F.D.
AutoCAD SHX Text 16x12
AutoCAD SHX Text 18x14
AutoCAD SHX Text 6"
AutoCAD SHX Text T
AutoCAD SHX Text 12x10
AutoCAD SHX Text 6"
AutoCAD SHX Text 8x10
AutoCAD SHX Text 8x10
AutoCAD SHX Text 20"
AutoCAD SHX Text 6x10
AutoCAD SHX Text 18"
AutoCAD SHX Text 14"
AutoCAD SHX Text 20"
AutoCAD SHX Text 28x16
AutoCAD SHX Text 36x16
AutoCAD SHX Text 36x16
AutoCAD SHX Text T
AutoCAD SHX Text
200CFM (TYP.6)
AutoCAD SHX Text 12x10
AutoCAD SHX Text 14x14
AutoCAD SHX Text 8x10
AutoCAD SHX Text 8x10
AutoCAD SHX Text 12x12
AutoCAD SHX Text 12x12
AutoCAD SHX Text 14x14
AutoCAD SHX Text 10"
AutoCAD SHX Text 12"
AutoCAD SHX Text 12"
AutoCAD SHX Text 14"
AutoCAD SHX Text 18"
AutoCAD SHX Text 12"
AutoCAD SHX Text 6x10
AutoCAD SHX Text 10"
AutoCAD SHX Text 11"
AutoCAD SHX Text 8x10
AutoCAD SHX Text 10x10
AutoCAD SHX Text 6x10
AutoCAD SHX Text 12x10
AutoCAD SHX Text 8x10
AutoCAD SHX Text
200CFM (TYP.4)
AutoCAD SHX Text 14x10
AutoCAD SHX Text 8"
AutoCAD SHX Text 8x10
AutoCAD SHX Text
200CFM (TYP.4)
AutoCAD SHX Text
145CFM (TYP.3)
AutoCAD SHX Text 11"
AutoCAD SHX Text 12"
AutoCAD SHX Text 8x10
AutoCAD SHX Text 28x16
AutoCAD SHX Text 12"
AutoCAD SHX Text 10"
AutoCAD SHX Text 450 250
AutoCAD SHX Text
DD
AutoCAD SHX Text 540 450
AutoCAD SHX Text
DD
AutoCAD SHX Text 450 250
AutoCAD SHX Text
DD
AutoCAD SHX Text 1200 775
AutoCAD SHX Text
DD
AutoCAD SHX Text 1200 775
AutoCAD SHX Text
DD
AutoCAD SHX Text 1280 1280
AutoCAD SHX Text
DD
AutoCAD SHX Text 800 475
AutoCAD SHX Text
DD
AutoCAD SHX Text 1235 800
AutoCAD SHX Text
DD
AutoCAD SHX Text
VV 360
AutoCAD SHX Text 8x10
AutoCAD SHX Text 700 700
AutoCAD SHX Text
DD
AutoCAD SHX Text
7,900 CFM
AutoCAD SHX Text
VD
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 1540 1125
AutoCAD SHX Text
DD
AutoCAD SHX Text 270 225
AutoCAD SHX Text T
AutoCAD SHX Text 8x10
AutoCAD SHX Text 8x10
AutoCAD SHX Text 360 195
AutoCAD SHX Text
DD
AutoCAD SHX Text 8x10
AutoCAD SHX Text T
AutoCAD SHX Text 12x10
AutoCAD SHX Text 8x10
AutoCAD SHX Text
135CFM (TYP.2)
AutoCAD SHX Text
180CFM (TYP.2)
AutoCAD SHX Text
170CFM (TYP.4)
AutoCAD SHX Text 680 600
AutoCAD SHX Text
DD
AutoCAD SHX Text 8"
AutoCAD SHX Text 6"
AutoCAD SHX Text 8"
AutoCAD SHX Text 10"
AutoCAD SHX Text 12"
AutoCAD SHX Text 6"
AutoCAD SHX Text T
AutoCAD SHX Text 160 150
AutoCAD SHX Text
DD
AutoCAD SHX Text 14"
AutoCAD SHX Text 12"
AutoCAD SHX Text 12"
AutoCAD SHX Text 14"
AutoCAD SHX Text 270 225
AutoCAD SHX Text
DD
AutoCAD SHX Text 300 300
AutoCAD SHX Text
DD
AutoCAD SHX Text T
AutoCAD SHX Text 7"
AutoCAD SHX Text 8x10
AutoCAD SHX Text 8"
AutoCAD SHX Text 6"
AutoCAD SHX Text 7"
AutoCAD SHX Text T
AutoCAD SHX Text 10"
AutoCAD SHX Text 12"
AutoCAD SHX Text 7"
AutoCAD SHX Text 9"
AutoCAD SHX Text 12"
AutoCAD SHX Text 14"
AutoCAD SHX Text 8x10
AutoCAD SHX Text 8x10
AutoCAD SHX Text 6x10
AutoCAD SHX Text T
AutoCAD SHX Text 450 245
AutoCAD SHX Text
DD
AutoCAD SHX Text 225 150
AutoCAD SHX Text T
AutoCAD SHX Text
225CFM (TYP.2)
AutoCAD SHX Text
135CFM (TYP.2)
AutoCAD SHX Text
225CFM
AutoCAD SHX Text
75CFM (TYP.4)
AutoCAD SHX Text 14"
AutoCAD SHX Text 8"
AutoCAD SHX Text 375 375
AutoCAD SHX Text
DD
AutoCAD SHX Text T
AutoCAD SHX Text 6x10
AutoCAD SHX Text 8x10
AutoCAD SHX Text 12"
AutoCAD SHX Text 12"
AutoCAD SHX Text 12"
AutoCAD SHX Text 14x12
AutoCAD SHX Text 6x10
AutoCAD SHX Text 5"
AutoCAD SHX Text 4-1/4x36 200C-5 TYP.5
AutoCAD SHX Text
8" TYP.5
AutoCAD SHX Text 10x10
AutoCAD SHX Text 12x12
AutoCAD SHX Text 12x12
AutoCAD SHX Text 1055 1055
AutoCAD SHX Text
180CFM
AutoCAD SHX Text
65CFM
AutoCAD SHX Text 14x12
AutoCAD SHX Text 8x10
AutoCAD SHX Text 8x10
AutoCAD SHX Text 6x10
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text
220CFM (TYP.2)
AutoCAD SHX Text
130CFM (TYP.2)
AutoCAD SHX Text 440 240
AutoCAD SHX Text
DD
AutoCAD SHX Text 400 375
AutoCAD SHX Text
DD
AutoCAD SHX Text 7"
AutoCAD SHX Text 9"
AutoCAD SHX Text 8"
AutoCAD SHX Text 11"
AutoCAD SHX Text 10"
AutoCAD SHX Text 8x10
AutoCAD SHX Text 260 225
AutoCAD SHX Text
DD
AutoCAD SHX Text
200CFM (TYP.2)
AutoCAD SHX Text
180CFM
AutoCAD SHX Text 11"
AutoCAD SHX Text 7"
AutoCAD SHX Text T
AutoCAD SHX Text
180CFM
AutoCAD SHX Text 8"
AutoCAD SHX Text 9"
AutoCAD SHX Text 16"
AutoCAD SHX Text 16"
AutoCAD SHX Text 670 670
AutoCAD SHX Text
DD
AutoCAD SHX Text T
AutoCAD SHX Text 8x10
AutoCAD SHX Text 525 390
AutoCAD SHX Text
DD
AutoCAD SHX Text 14"
AutoCAD SHX Text 520 520
AutoCAD SHX Text
DD
AutoCAD SHX Text
175CFM (TYP.3)
AutoCAD SHX Text
220CFM (TYP.2)
AutoCAD SHX Text 440 240
AutoCAD SHX Text
DD
AutoCAD SHX Text 14"
AutoCAD SHX Text 12"
AutoCAD SHX Text 9"
AutoCAD SHX Text 9"
AutoCAD SHX Text 7"
AutoCAD SHX Text 9"
AutoCAD SHX Text 11"
AutoCAD SHX Text 8"
AutoCAD SHX Text 8x10
AutoCAD SHX Text T
AutoCAD SHX Text 10x10
AutoCAD SHX Text 480 375
AutoCAD SHX Text
DD
AutoCAD SHX Text 9"
AutoCAD SHX Text 8"
AutoCAD SHX Text 7"
AutoCAD SHX Text 7"
AutoCAD SHX Text 8x10
AutoCAD SHX Text 345 345
AutoCAD SHX Text
DD
AutoCAD SHX Text 8x10
AutoCAD SHX Text T
AutoCAD SHX Text 6"
AutoCAD SHX Text 6"
AutoCAD SHX Text 12x6 50H-1 TYP.2
AutoCAD SHX Text 8x10
AutoCAD SHX Text 6"
AutoCAD SHX Text 10x10
AutoCAD SHX Text 6"
AutoCAD SHX Text 8x6 BOOT, TYP.2
AutoCAD SHX Text 10x10 210C-2 TYP.2
AutoCAD SHX Text 10x10 390C-2 TYP.2
AutoCAD SHX Text 8"
AutoCAD SHX Text 36x16
AutoCAD SHX Text 40x16
AutoCAD SHX Text 48x16
AutoCAD SHX Text 20x18 SA
AutoCAD SHX Text 20x18 RA
AutoCAD SHX Text 12x12
AutoCAD SHX Text 10x10
AutoCAD SHX Text
7-3 180C-1 TYP.2
AutoCAD SHX Text 4-1/4x36 200C-6 TYP.2
AutoCAD SHX Text 6"
AutoCAD SHX Text 6-4 150C-1
AutoCAD SHX Text 10x10 300C-2
AutoCAD SHX Text 20x18
AutoCAD SHX Text T
AutoCAD SHX Text 12x6
AutoCAD SHX Text
11,700 CFM
AutoCAD SHX Text F.D.
AutoCAD SHX Text 8x5
AutoCAD SHX Text LINED 20x12
AutoCAD SHX Text T
AutoCAD SHX Text (2)12x6 150H-2
AutoCAD SHX Text 18x24 1250L-1
AutoCAD SHX Text LINED 20x10
AutoCAD SHX Text LINED 18x12
AutoCAD SHX Text LINED 18x12
AutoCAD SHX Text 18x24 1250L-1
AutoCAD SHX Text 18x12
AutoCAD SHX Text LINED 20x10
AutoCAD SHX Text 20x10 DN
AutoCAD SHX Text LINED 20x12
AutoCAD SHX Text LINED 18x12
AutoCAD SHX Text LINED 20x10
AutoCAD SHX Text 20x10 FN
AutoCAD SHX Text T
AutoCAD SHX Text
AHU-1
AutoCAD SHX Text 24x10 550H-1
AutoCAD SHX Text 14x6 150H-1
AutoCAD SHX Text LINED 12x12
AutoCAD SHX Text 24x10 550H-1
AutoCAD SHX Text LINED 12x12
AutoCAD SHX Text 14x6 150H-1
AutoCAD SHX Text LINED 18x12
AutoCAD SHX Text 20x18
AutoCAD SHX Text 4x10
AutoCAD SHX Text
1-1/4"HW& HWR PIPING ABOVE CEILING
AutoCAD SHX Text
3/4"HW&HWR
AutoCAD SHX Text
3/4"HW&HWR
AutoCAD SHX Text
1"HW&HWR ABOVE CEILING
AutoCAD SHX Text T
AutoCAD SHX Text 10x10 140C-2
AutoCAD SHX Text 5-1 50C-1
AutoCAD SHX Text 9"
AutoCAD SHX Text
DD
AutoCAD SHX Text
DD
B
B
C
C
D
D
E
E
F
F
G
G
H
H
I
I
J
J
2 2
3 3
5 5
6 6
4 4
1 1
NOT FOR
CONSTRUCTION
R E V
I S I O
N S
DATE:
FORWARD ARCHITECTURE, LLC
+1.503.851.7401
PO BOX 44, SALEM, OR 97308
WWW.FWSARCH.COM
NOT FOR
CONSTRUCTION
R E V
I S I O
N S
DATE:
FORWARD ARCHITECTURE, LLC
+1.503.851.7401
PO BOX 44, SALEM, OR 97308
WWW.FWSARCH.COM
DDC CONTROLS FOR
ODVA OFFICE BUILDING
700 SUMMER ST NE, SALEM, OR
97301
M-202
MECHANICAL
LEVEL 2 FLOOR
PLAN - EXISTING
D R
A F T
APR 21, 2026
OREGON DEPT. OF VETERANS'
AFFAIRS
N O
D
E S C
R I P
T I O
N D
A T E
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text
MD-102
AutoCAD SHX Text
MD-101
AutoCAD SHX Text M
AutoCAD SHX Text M
AutoCAD SHX Text
BRANCH 3
AutoCAD SHX Text
BRANCH 4
AutoCAD SHX Text
BRANCH 1
AutoCAD SHX Text
BRANCH 2
AutoCAD SHX Text
200 CFM
AutoCAD SHX Text
200 CFM
AutoCAD SHX Text
150 CFM
AutoCAD SHX Text 10x10 SA
AutoCAD SHX Text
275 CFM
AutoCAD SHX Text
150 CFM
AutoCAD SHX Text
150 CFM
AutoCAD SHX Text
150 CFM
AutoCAD SHX Text
50 CFM
AutoCAD SHX Text
50 CFM
AutoCAD SHX Text
190 CFM
AutoCAD SHX Text
190 CFM
AutoCAD SHX Text
190 CFM
AutoCAD SHX Text
190 CFM
AutoCAD SHX Text
200 CFM
AutoCAD SHX Text
100 CFM
AutoCAD SHX Text
200 CFM
AutoCAD SHX Text 6x6 SA
AutoCAD SHX Text
50 CFM
AutoCAD SHX Text
140 CFM
AutoCAD SHX Text
140 CFM
AutoCAD SHX Text
140 CFM
AutoCAD SHX Text
140 CFM
AutoCAD SHX Text
140 CFM
AutoCAD SHX Text
140 CFM
AutoCAD SHX Text
50 CFM
AutoCAD SHX Text
50 CFM
AutoCAD SHX Text T
AutoCAD SHX Text
DD-217
AutoCAD SHX Text T
AutoCAD SHX Text
VV-232
AutoCAD SHX Text
250 CFM
AutoCAD SHX Text
250 CFM
AutoCAD SHX Text 6x6 SA
AutoCAD SHX Text
100 CFM
AutoCAD SHX Text T
AutoCAD SHX Text 6x6 SA
AutoCAD SHX Text
50 CFM
AutoCAD SHX Text T
AutoCAD SHX Text
VV-244
AutoCAD SHX Text
50 CFM
AutoCAD SHX Text
185 CFM
AutoCAD SHX Text
185 CFM
AutoCAD SHX Text
100 CFM
AutoCAD SHX Text
160 CFM
AutoCAD SHX Text
160 CFM
AutoCAD SHX Text
160 CFM
AutoCAD SHX Text
160 CFM
AutoCAD SHX Text
160 CFM
AutoCAD SHX Text
160 CFM
AutoCAD SHX Text
160 CFM
AutoCAD SHX Text
160 CFM
AutoCAD SHX Text
160 CFM
AutoCAD SHX Text
160 CFM
AutoCAD SHX Text
100 CFM
AutoCAD SHX Text
150 CFM
AutoCAD SHX Text
160 CFM
AutoCAD SHX Text
160 CFM
AutoCAD SHX Text 10x10 SA
AutoCAD SHX Text
255 CFM
AutoCAD SHX Text T
AutoCAD SHX Text
CAPPED
AutoCAD SHX Text
RELOCATED VV 3-01
AutoCAD SHX Text
200 CFM
AutoCAD SHX Text
200 CFM
AutoCAD SHX Text
200 CFM
AutoCAD SHX Text
200 CFM
AutoCAD SHX Text T
AutoCAD SHX Text
DD 1-10
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text
DD 1-05
AutoCAD SHX Text T
AutoCAD SHX Text
DD 3-05
AutoCAD SHX Text
150 CFM
AutoCAD SHX Text
175 CFM
AutoCAD SHX Text
200 CFM
AutoCAD SHX Text
200 CFM
AutoCAD SHX Text
AutoCAD SHX Text
200 CFM
AutoCAD SHX Text M
AutoCAD SHX Text M
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text 1-04
AutoCAD SHX Text
315 CFM
AutoCAD SHX Text
315 CFM
AutoCAD SHX Text
225 CFM
AutoCAD SHX Text
225 CFM
AutoCAD SHX Text
100 CFM
AutoCAD SHX Text
115 CFM
AutoCAD SHX Text
115 CFM
AutoCAD SHX Text
115 CFM
AutoCAD SHX Text
115 CFM
AutoCAD SHX Text
235 CFM
AutoCAD SHX Text
235 CFM
AutoCAD SHX Text
160 CFM
AutoCAD SHX Text
160 CFM
AutoCAD SHX Text
160 CFM
AutoCAD SHX Text
160 CFM
AutoCAD SHX Text
180 CFM
AutoCAD SHX Text
180 CFM
AutoCAD SHX Text
230 CFM
AutoCAD SHX Text
230 CFM
AutoCAD SHX Text
260 CFM
AutoCAD SHX Text
260 CFM
AutoCAD SHX Text
260 CFM
AutoCAD SHX Text
170 CFM
AutoCAD SHX Text
170 CFM
AutoCAD SHX Text
130 CFM
AutoCAD SHX Text
115 CFM
AutoCAD SHX Text
115 CFM
AutoCAD SHX Text
115 CFM
AutoCAD SHX Text
115 CFM
AutoCAD SHX Text
170 CFM
AutoCAD SHX Text
270 CFM
270 CFM
B
B
C
C
D
D
E
E
F
F
G
G
H
H
I
I
J
J
2 2
3 3
5 5
6 6
4 4
1 1
CONFERENCE ROOM
CONFERENCE
ROOM
CONFERENCE
ELEV.
CONFERENCE
CCB
ELEV.
JAN. (EXST)
03JAN
TOILET
TOILET
WELLNESS (EXST)
03W2
WELLNESS (EXST)
03W1
CORRIDOR
OPEN OFFICE
CONFERENCE ROOM
HALL
OFFICE
OFFICE
OFFICE
OFFICE
OFFICE
OFFICE
OFFICE
OFFICE
OFFICE
STOR.
STOR.
PHONE BOOTH
PHONE BOOTH
PRINT/ SUPPLY
PRINT/ SUPPLY
RECEPTION
SECURE STORAGE
OPEN OFFICE
SERVER
OFFICE
OFFICE
BREAK ROOM
STAIR
03S
STAIR
03ST
OPEN WORK
OFFICE
29J
OFFICE
29K
OFFICE
29L
OFFICE
29M
OFFICE
29N
NOT FOR
CONSTRUCTION
R E V
I S I O
N S
DATE:
FORWARD ARCHITECTURE, LLC
+1.503.851.7401
PO BOX 44, SALEM, OR 97308
WWW.FWSARCH.COM
97301
AFFAIRS
N O
NOT FOR
CONSTRUCTION
R E V
I S I O
N S
DATE:
FORWARD ARCHITECTURE, LLC
+1.503.851.7401
PO BOX 44, SALEM, OR 97308
WWW.FWSARCH.COM
NOT FOR
CONSTRUCTION
R E V
I S I O
N S
DATE:
FORWARD ARCHITECTURE, LLC
+1.503.851.7401
PO BOX 44, SALEM, OR 97308
WWW.FWSARCH.COM
DDC CONTROLS FOR
ODVA OFFICE BUILDING
700 SUMMER ST NE, SALEM, OR
97301
M-203
MECHANICAL
LEVEL 3 FLOOR
PLAN - EXISTING
D R
A F T
APR 21, 2026
OREGON DEPT. OF VETERANS'
AFFAIRS
N O
D
E S C
R I P
T I O
N D
A T E
AutoCAD SHX Text
MD-102
AutoCAD SHX Text
MD-101
AutoCAD SHX Text
180CFM (TYP.2)
AutoCAD SHX Text
185CFM (TYP.3)
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text 8x10
AutoCAD SHX Text 8"
AutoCAD SHX Text 10x10
AutoCAD SHX Text 360 180
AutoCAD SHX Text
DD
AutoCAD SHX Text 555 275
AutoCAD SHX Text
DD
AutoCAD SHX Text 450 225
AutoCAD SHX Text
DD
AutoCAD SHX Text 8x10
AutoCAD SHX Text
150CFM (TYP.3)
AutoCAD SHX Text 8x10
AutoCAD SHX Text 6"
AutoCAD SHX Text 9"
AutoCAD SHX Text 8x10
AutoCAD SHX Text 8x10
AutoCAD SHX Text 12x10
AutoCAD SHX Text 7"
AutoCAD SHX Text 12"
AutoCAD SHX Text 12x10
AutoCAD SHX Text 4x10
AutoCAD SHX Text T
AutoCAD SHX Text 14x12
AutoCAD SHX Text 16x14
AutoCAD SHX Text
200CFM (TYP.7)
AutoCAD SHX Text 9"
AutoCAD SHX Text 10"
AutoCAD SHX Text 14"
AutoCAD SHX Text 14"
AutoCAD SHX Text 12"
AutoCAD SHX Text T
AutoCAD SHX Text
220CFM (TYP.5)
AutoCAD SHX Text 16"
AutoCAD SHX Text 18"
AutoCAD SHX Text 20"
AutoCAD SHX Text 9"
AutoCAD SHX Text 11"
AutoCAD SHX Text 925 460
AutoCAD SHX Text
DD
AutoCAD SHX Text 8"
AutoCAD SHX Text 6"
AutoCAD SHX Text 330 115
AutoCAD SHX Text
DD
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text 16"
AutoCAD SHX Text 8x10
AutoCAD SHX Text 12x6 50H-1 TYP.2
AutoCAD SHX Text 12x12
AutoCAD SHX Text 6x12
AutoCAD SHX Text
165CFM (TYP.2)
AutoCAD SHX Text
125CFM (TYP.4)
AutoCAD SHX Text 10"
AutoCAD SHX Text 14"
AutoCAD SHX Text T
AutoCAD SHX Text 8x10
AutoCAD SHX Text 14x10
AutoCAD SHX Text 12x10
AutoCAD SHX Text 16x14
AutoCAD SHX Text
200CFM (TYP.7)
AutoCAD SHX Text 1400 700
AutoCAD SHX Text
DD
AutoCAD SHX Text 1100 550
AutoCAD SHX Text 1400 700
AutoCAD SHX Text
DD
AutoCAD SHX Text 625 575
AutoCAD SHX Text
DD
AutoCAD SHX Text 10"
AutoCAD SHX Text 18"
AutoCAD SHX Text
125CFM (TYP.5)
AutoCAD SHX Text 6x10
AutoCAD SHX Text 8x10
AutoCAD SHX Text 36x16
AutoCAD SHX Text 500 450
AutoCAD SHX Text
DD
AutoCAD SHX Text 20"
AutoCAD SHX Text 6"
AutoCAD SHX Text 9"
AutoCAD SHX Text 40x16
AutoCAD SHX Text 360 200
AutoCAD SHX Text
DD
AutoCAD SHX Text 8"
AutoCAD SHX Text 28x16
AutoCAD SHX Text 48x16
AutoCAD SHX Text 14"
AutoCAD SHX Text 12x10
AutoCAD SHX Text 14x10
AutoCAD SHX Text 8x10
AutoCAD SHX Text 16x14
AutoCAD SHX Text T
AutoCAD SHX Text
200CFM (TYP.7)
AutoCAD SHX Text 12x10
AutoCAD SHX Text 14x10
AutoCAD SHX Text 8x10
AutoCAD SHX Text 16x14
AutoCAD SHX Text T
AutoCAD SHX Text 1400 705
AutoCAD SHX Text
DD
AutoCAD SHX Text 1435 715
AutoCAD SHX Text
DD
AutoCAD SHX Text
200CFM (TYP.7)
AutoCAD SHX Text 10"
AutoCAD SHX Text 10"
AutoCAD SHX Text T
AutoCAD SHX Text 10x10
AutoCAD SHX Text T
AutoCAD SHX Text
180CFM (TYP.2)
AutoCAD SHX Text 8x10
AutoCAD SHX Text T
AutoCAD SHX Text
140CFM (TYP.2)
AutoCAD SHX Text
185CFM (TYP.3)
AutoCAD SHX Text T
AutoCAD SHX Text 555 275
AutoCAD SHX Text
DD
AutoCAD SHX Text
170CFM (TYP.2)
AutoCAD SHX Text 6x10
AutoCAD SHX Text 6"
AutoCAD SHX Text 9"
AutoCAD SHX Text 7"
AutoCAD SHX Text 280 140
AutoCAD SHX Text
DD
AutoCAD SHX Text 12"
AutoCAD SHX Text 7"
AutoCAD SHX Text
125CFM
AutoCAD SHX Text 10x10
AutoCAD SHX Text 14"
AutoCAD SHX Text 10"
AutoCAD SHX Text 6"
AutoCAD SHX Text 8"
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text
170CFM (TYP.3)
AutoCAD SHX Text 6x10
AutoCAD SHX Text 10"
AutoCAD SHX Text 735 710
AutoCAD SHX Text
DD
AutoCAD SHX Text 340 170
AutoCAD SHX Text
DD
AutoCAD SHX Text 8x10
AutoCAD SHX Text 14"
AutoCAD SHX Text 16"
AutoCAD SHX Text 9"
AutoCAD SHX Text 7"
AutoCAD SHX Text 14"
AutoCAD SHX Text
125CFM
AutoCAD SHX Text
120CFM
AutoCAD SHX Text 510 255
AutoCAD SHX Text
DD
AutoCAD SHX Text 280 140
AutoCAD SHX Text
DD
AutoCAD SHX Text 8x10
AutoCAD SHX Text 10x10
AutoCAD SHX Text
120CFM
AutoCAD SHX Text 7"
AutoCAD SHX Text 6x10
AutoCAD SHX Text T
AutoCAD SHX Text 7"
AutoCAD SHX Text
140CFM (TYP.2)
AutoCAD SHX Text
225CFM (TYP.2)
AutoCAD SHX Text 450 225
AutoCAD SHX Text
DD
AutoCAD SHX Text 260 130
AutoCAD SHX Text
DD
AutoCAD SHX Text 390 195
AutoCAD SHX Text
DD
AutoCAD SHX Text 9"
AutoCAD SHX Text 7"
AutoCAD SHX Text 6"
AutoCAD SHX Text
130CFM (TYP.2)
AutoCAD SHX Text 8x12
AutoCAD SHX Text 6x10
AutoCAD SHX Text 12"
AutoCAD SHX Text 6"
AutoCAD SHX Text 14"
AutoCAD SHX Text 20"
AutoCAD SHX Text 16"
AutoCAD SHX Text F.D.
AutoCAD SHX Text 10"
AutoCAD SHX Text 8"
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text
195CFM (TYP.2)
AutoCAD SHX Text 8x10
AutoCAD SHX Text 8x10
AutoCAD SHX Text 8x10
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text 450 225
AutoCAD SHX Text
DD
AutoCAD SHX Text 525 260
AutoCAD SHX Text
DD
AutoCAD SHX Text 440 220
AutoCAD SHX Text
DD
AutoCAD SHX Text
150CFM (TYP.3)
AutoCAD SHX Text
175CFM (TYP.3)
AutoCAD SHX Text
220CFM (TYP.2)
AutoCAD SHX Text
150CFM (TYP.2)
AutoCAD SHX Text 8x12
AutoCAD SHX Text 6x12
AutoCAD SHX Text 10x14
AutoCAD SHX Text 620 570
AutoCAD SHX Text
DD
AutoCAD SHX Text 300 150
AutoCAD SHX Text
DD
AutoCAD SHX Text 6x10
AutoCAD SHX Text 18"
AutoCAD SHX Text 16"
AutoCAD SHX Text
155CFM (TYP.4)
AutoCAD SHX Text 12"
AutoCAD SHX Text 10"
AutoCAD SHX Text 9"
AutoCAD SHX Text 7"
AutoCAD SHX Text 9"
AutoCAD SHX Text 7"
AutoCAD SHX Text 20"
AutoCAD SHX Text 8"
AutoCAD SHX Text 6"
AutoCAD SHX Text 20"
AutoCAD SHX Text 16"
AutoCAD SHX Text 14"
AutoCAD SHX Text 9"
AutoCAD SHX Text 12"
AutoCAD SHX Text
DD
AutoCAD SHX Text 115 60
AutoCAD SHX Text 260 130
AutoCAD SHX Text
DD
AutoCAD SHX Text
115CFM
AutoCAD SHX Text 9"
AutoCAD SHX Text 7"
AutoCAD SHX Text 10x10
AutoCAD SHX Text 6x10
AutoCAD SHX Text 16"
AutoCAD SHX Text 14"
AutoCAD SHX Text 12"
AutoCAD SHX Text 10"
AutoCAD SHX Text 10"
AutoCAD SHX Text 8"
AutoCAD SHX Text 6"
AutoCAD SHX Text 8"
AutoCAD SHX Text 6x10
AutoCAD SHX Text
130CFM (TYP.2)
AutoCAD SHX Text
220CFM (TYP.2)
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text 7"
AutoCAD SHX Text 9"
AutoCAD SHX Text 6"
AutoCAD SHX Text 8x12
AutoCAD SHX Text 440 220
AutoCAD SHX Text
DD
AutoCAD SHX Text 390 195
AutoCAD SHX Text
DD
AutoCAD SHX Text 8x10
AutoCAD SHX Text
195CFM (TYP.2)
AutoCAD SHX Text 16"
AutoCAD SHX Text T
AutoCAD SHX Text 6"
AutoCAD SHX Text 10x12
AutoCAD SHX Text 12x6 50H-1 (TYP.2)
AutoCAD SHX Text 16x16 UP TO EF-1
AutoCAD SHX Text 10x10 390C-2
AutoCAD SHX Text 10x10 415C-2
AutoCAD SHX Text
7-4 180C-1 TYP.2
AutoCAD SHX Text 12x12
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 10x10
AutoCAD SHX Text 8x10
AutoCAD SHX Text 36x16
AutoCAD SHX Text 36x16
AutoCAD SHX Text 28x16
AutoCAD SHX Text 16"
AutoCAD SHX Text 16"
AutoCAD SHX Text 12"
AutoCAD SHX Text 18"
AutoCAD SHX Text 16"
AutoCAD SHX Text 14"
AutoCAD SHX Text 18"
AutoCAD SHX Text 14"
AutoCAD SHX Text 8"
AutoCAD SHX Text 6"
AutoCAD SHX Text 14"
AutoCAD SHX Text 12"
AutoCAD SHX Text
VV 360
AutoCAD SHX Text 320 160
AutoCAD SHX Text
DD
AutoCAD SHX Text 1380 1190
AutoCAD SHX Text
DD
AutoCAD SHX Text 16x14
AutoCAD SHX Text 12"
AutoCAD SHX Text
150CFM (TYP.7)
AutoCAD SHX Text
165CFM
AutoCAD SHX Text 12x10
AutoCAD SHX Text 16"
AutoCAD SHX Text 7"
AutoCAD SHX Text 14"
AutoCAD SHX Text 9"
AutoCAD SHX Text 530 265
AutoCAD SHX Text
DD
AutoCAD SHX Text 10x10
AutoCAD SHX Text 6x10
AutoCAD SHX Text
165CFM
AutoCAD SHX Text
195CFM (TYP.4)
AutoCAD SHX Text 10x10
AutoCAD SHX Text
265CFM (TYP.2)
AutoCAD SHX Text T
AutoCAD SHX Text 8"
AutoCAD SHX Text 11"
AutoCAD SHX Text 14x10
AutoCAD SHX Text 780 390
AutoCAD SHX Text
DD
AutoCAD SHX Text 8"
AutoCAD SHX Text 10"
AutoCAD SHX Text 10"
AutoCAD SHX Text 14"
AutoCAD SHX Text 16x14
AutoCAD SHX Text 14x12
AutoCAD SHX Text
195CFM (TYP.2)
AutoCAD SHX Text
165CFM (TYP.8)
AutoCAD SHX Text 1420 630
AutoCAD SHX Text
DD
AutoCAD SHX Text T
AutoCAD SHX Text 14x10
AutoCAD SHX Text 10x10
AutoCAD SHX Text 780 390
AutoCAD SHX Text
DD
AutoCAD SHX Text 6x10
AutoCAD SHX Text T
AutoCAD SHX Text
80CFM (TYP.4)
AutoCAD SHX Text
11,000 CFM
AutoCAD SHX Text F.D.
AutoCAD SHX Text 56x20
AutoCAD SHX Text F.D.
AutoCAD SHX Text
1-1/4" HW & HWR UP/DN
AutoCAD SHX Text
DD
AutoCAD SHX Text 7"
AutoCAD SHX Text 9"
AutoCAD SHX Text 10"
AutoCAD SHX Text 14"
AutoCAD SHX Text 12"
AutoCAD SHX Text
125CFM
AutoCAD SHX Text 9"
AutoCAD SHX Text T
AutoCAD SHX Text T
8"
| Plans Salem HVAC 260426.pdf |
| 10806_M_Mech 1st floor-Layout1 |
| Layout1 |
| 10806_M200_Mech 2nd floor-Layout1 |
| Layout1 |
| 10806_M_Mech 3rd floor-Layout1 |
| Layout1 |
File details come from the government source that posted it. Updated .